PPD-QCSWB282Low Power 2x2 802.11 a/b/g/n + BT SDIO-WLAN/UART-BT Card

Confidential and Proprietary - Qualcomm Atheros, Inc. Not to be used, copied, reproduced in whole or in part, nor its contents revealed in any manner to others without the express written permission of Qualcomm Atheros, Inc. QUALCOMM is registered trademark of Qualcomm Incorporated. ATHEROS is a registered trademark of Qualcomm Atheros, Inc. Any other registered and unregistered trademarks are the property of Qualcomm Incorporated, Qualcomm Atheros, Inc. or their respective owners and used with permission. Registered marks owned by Qualcomm Incorporated and Qualcomm Atheros, Inc. are registered in the United States of America and may be registered in other countries. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Qualcomm Atheros, Inc. 1700 Technology Drive San Jose, CA 95110-1383 U.S.A. Copyright © 2011 Qualcomm Atheros, Inc. All rights reserved. WB282 Modular Certification OEM Integrator Instructions MKG-17218 Ver. 1.0 December 4, 2012 MKG-17218 Ver. 1.0 2 Confidential and Proprietary - Qualcomm Atheros, Inc. MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Revision history Revision Date Description Ver. 1.0 Dec 2012 Initial release NOTE: The Qualcomm Atheros (QCA) reference design radio module (the “Module”) is designed for use only in specific countries in which QCA has obtained certificates of compliance with local laws and regulations. Therefore, the Module may not be sold, operated or incorporated into products for use in countries for which it has not been certified. See Section 3 herein. In addition, any deviation from the settings, methods, conditions and restrictions for integration of the Module into a host system, as detailed in this document, could be a violation of applicable national law and may be punishable as such, and in such event, the products into which the Module is incorporated may not be lawfully distributed or sold in such countries. QCA assumes no responsibility for any liability or loss related to installation, integration or operation of the Module. WB282 Modular Certification OEM Integrator Instructions MKG-17218 Ver. 1.0 3 Confidential and Proprietary - Qualcomm Atheros, Inc. MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Contents 1 Introduction ...................................................................................................... 4 2 Applicable Module ........................................................................................... 4 3 Available Global Modular Approvals from Qualcomm Atheros .................. 5 4 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator ........................................................................... 5 5 Compliant/Allowable Tx Power Settings Programmed into EEPROM ........ 7 6 Allowable Antennas For Use With The Radio Module .................................. 7 7 Antenna Placement inside the Host System and RF Safety ........................ 8 8 Simultaneous Transmission with Other Integrated or Plug-In Radios ....... 8 9 Module May Not Be Installed by End Users .................................................. 9 10 Required Labeling on the Outside of the Host .......................................... 10 10.1 FCC ...................................................................................................................... 10 10.2 Taiwan NCC ......................................................................................................... 10 10.3 European Community R&TTE .............................................................................. 11 11 Required Labeling on the Module .............................................................. 12 11.1 FCC labeling on the Module ................................................................................. 12 11.2 Rest of world labeling on the Module .................................................................... 12 11.3 Instructions to download the sample global label artwork with certification IDs .... 12 12 Required Regulatory Wording for User Manual/Installation Manual ....... 13 12.1 FCC compliance information ................................................................................ 13 12.2 Industry Canada notice ......................................................................................... 14 12.3 European Community (R&TTE) user manual wording and declaration ................. 15 12.4 European Community (R&TTE) Declaration of Conformity for System ................ 17 12.5 Taiwan user manual wording ................................................................................ 17 12.6 Korea user manual wording .................................................................................. 18 13 OEM Integrator Checklist ............................................................................ 19 WB282 Modular Certification OEM Integrator Instructions MKG-17218 Ver. 1.0 4 Confidential and Proprietary - Qualcomm Atheros, Inc. MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 1 Introduction This document describes the steps that the OEM integrator must follow when designing and manufacturing a system utilizing a Qualcomm Atheros (QCA) reference design radio module (the “Module”). Failure to follow the instructions in this document may invalidate the FCC certification and authorization of the Module for use in the U.S. and in other countries. The Qualcomm Atheros modular certifications described in this document apply only to radio conformance for the Module. The OEM integrator is responsible for all system-level EMI/EMC and Product Safety testing and certification that apply to the host system in the U.S. and other countries where the system will be marketed or sold. This document must be read in conjunction with the document “WB282 MOB Module Certified Antennas and Layou…

Text truncated - open the document above for the full version.

1 Hsieh, Joe From:[email protected] Sent: 2012年11月29日星期四 下午 10:39 To: Hsieh, Joe Cc: [email protected]; Hoque, Claire Subject: Re: 轉寄: Qualcomm Atheros, Inc., //PPD-QCSWB282 //AN12T0825 Hi Joe, Please refer to as below for reply those comments. Tks!! Andrea Hsia Bureau Veritas Consumer Products Services Electrical & Electronic Business Line, Taiwan Branch Tel: +886-3-318-3232 (ext. 1628) Fax: +886-3-327-0892 eMail: [email protected] Web : www.bureauveritas-adt.com Jessie Peng/TWN/VERITAS Jessie Peng/TWN/VERITAS 2012/11/23 下午 05:41 To Andrea Hsia/TWN/VERITAS@VERITAS cc Subject 轉寄: Qualcomm Atheros, Inc., //PPD-QCSWB282 //AN12T0825 Ref "Hsieh, Joe" <[email protected]> 2012/11/22 下午 03:28 To Hank Chung/TWN/VERITAS@VERITAS cc "Hsieh, Joe" <[email protected]> Subject Qualcomm Atheros, Inc., //PPD-QCSWB282 //AN12T0825 Ref Hi Hank, Please address following issues: ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Comments that need to be addressed by applicant: 2 1. As only 2Tx mode measurements are provided please confirm that maximum power in 1Tx mode is equal to the output power measured on each individual chain in 2Tx mode. (example, channel 38, 802.11a mode the maximum SISO power is 10.1dBm and the maximum MIMO power is 14.2dBm). ANS: Yes. the maximum output power in 1Tx mode is equal to the output power measured on each individual chain in 2Tx mode. ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Best regards, Joe Hsieh / UL CCS The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e‐mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increas e processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e‐mail address listed below the name of the sender. Revised documentation should not be emailed, but instead should be submitted through Attachment function at the UL‐CCS website. Please have your Assessment Number and FCC ID/IC C ertification number handy. You may use the following link: https://cert.ccsemc.com/filing/ "This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com"

J QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 www.qualcomm.com June 15, 2011 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Authorization of Handling FCC Regulatory Applications To Whom It May Concern: I, hereby, authorize Mr. Michael Green, to handle FCC Regulatory related applications for QUALCOMM ATHEROS Incorporated and sign all required application documents. Best Regards, Paul Guckian VP, Engineering QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121 Office: 858-651-1547 [email protected]

QUALCOMM ATHEROS, INC. 1700 Technology Drive, San Jose, CA 95110 T 408.773.5200 | F 408-773-9940 qca.qualcomm.com Power of Attorney 2012/8/27 To whom it may concern: We, the undersigned Qualcomm Atheros, Inc. hereby authorize Bureau Veritas Consumer Product Service (Hong Kong) Limited, Taoyuan Branch of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15 approval and any communication needed with the national authority. Any and all acts carried out by BVCPS on our behalf shall have the same effects as acts of our own. This authorization is limited to the following products： FCC ID: PPD-QCSWB282 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, --------------------------------------------------------------------------- Michael Green / Manager, Global Product Compliance

QUALCOMM ATHEROS, INC. 1700 Technology Drive, San Jose, CA 95110 T 408.773.5200 | F 408-773-9940 qca.qualcomm.com 2012/8/27 To whom it may concern: We, the undersigned, attest that this device does support “TPC” Transmit Power Control in the 5 GHz UNII bands. The software and associated drivers to support TPC are built into the device firmware, with no mechanism to disable or turn off TPC. This authorization is limited to the following products： Model name： ：： ：QCSWB282 FCC ID: PPD-QCSWB282 IC： ：： ：4104A-QCSWB282 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, --------------------------------------------------------------------------- Michael Green / Manager, Global Product Compliance

QUALCOMM ATHEROS, INC. 1700 Technology Drive, San Jose, CA 95110 T 408.773.5200 | F 408-773-9940 qca.qualcomm.com Date:2012/12/5 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: PPD-QCSWB282 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Theory of Operation Addendum - Regulatory algorithms v03 Released WB282 MOB Module Certified Antennas and Layout Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Pursuant to DA 04-1705 of the Commission’s Rules, we request short-term confidential treatment for the following information until Jan. 1 ST , 2013 of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External Photos Internal Photos Test Setup Photos User Manual WB282 Integrator Instructions (Mobile Category) V1.0 It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards --------------------------------------------------------------------------- QUALCOMM ATHEROS, INC. 1700 Technology Drive, San Jose, CA 95110 T 408.773.5200 | F 408-773-9940 qca.qualcomm.com Michael Green / Manager, Global Product Compliance

FCC ID: PPD-QCSWB282 Report No. : RF120625E05 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch November 30, 2012 Dear Application Examiner, Qualcomm Atheros, Inc., Low Power 2x2 802.11 a/b/g/n + BT SDIO-WLAN/UART-BT Card, FCC ID: PPD-QCSWB282, would like to have your authorization as a modular approval. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.”: The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip AR6004 & AR3002. 3. “The modular transmitter must have its own power supply regulation part no.: AR6004 & AR3002. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. Via a permanent trace between SiP antenna output and the U.F.L Connector or integrated antenna. 5. “The modular transmitter must be tested in a stand-alone configuration”. The EUT is tested in a stand-alone configuration via an extender. Please see section Photographs of Test Configuration in the test report. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. FCC ID: PPD-QCSWB282 Report No. : RF120625E05 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Hank Chung Manager Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

Report No. : 120625E05 Page 1 CONSTRUCTION PHOTOS OF EUT Report No. : 120625E05 Page 3 Report No. : 120625E05 Page 4 Report No. : 120625E05 Page 5 Report No. : 120625E05 Page 6

PROPOSED FCC ID LABEL AND LOCATION Printed Color： ：： ： Black 地色 地色地色 地色 ： ：： ：White 材質 材質材質 材質 ： ：： ：一般合成紙 一般合成紙一般合成紙 一般合成紙 粘著材 粘著材粘著材 粘著材 ： ：： ：樹脂系糊 樹脂系糊樹脂系糊 樹脂系糊 Bottom of EUT FCC / IC Label Location QUALCOMM ATHEROS, INC. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: PPD-QCSWB282 IC: 4104A-QCSWB282 Model: QCSWB282

Report No. : 120625E05 Page 2

Report No.: SA120625E05 1 of 10 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA120625E05 MODEL NO.: QCSWB282 FCC ID: PPD-QCSWB282 IC: 4104A-QCSWB282 RECEIVED: June 25, 2012 TESTED: Aug. 22 to Oct. 25, 2012 ISSUED: Nov. 06, 2012 APPLICANT: Qualcomm Atheros, Inc. ADDRESS: 1700 Technology Drive, San Jose, CA 95110 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA120625E05 2 of 10 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT .............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. ANTENNA GAIN....................................................................................................... 6 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ........................... 7 Report No.: SA120625E05 3 of 10 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA120625E05 Original release Nov. 06, 2012 Report No.: SA120625E05 4 of 10 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: Low Power 2x2 802.11 a/b/g/n + BT SDIO-WLAN/UART-BT Card BRAND NAME: Qualcomm Atheros MODEL NO.: QCSWB282 TEST SAMPLE: R&D SAMPLE APPLICANT: Qualcomm Atheros, Inc. STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: QCSWB282) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Nov. 06, 2012 ( Midoli Peng, Specialist ) APPROVED BY : , DATE: Nov. 06, 2012 ( May Chen, Deputy Manager ) Report No.: SA120625E05 5 of 10 Report Format Version 5.0.0 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA120625E05 6 of 10 Report Format Version 5.0.0 5. ANTENNA GAIN The antenna provided to the EUT, please refer to the following table: Brand Model Antenna Type Peak gain with cable loss 2.4G(dBi) Peak gain with cable loss 5G(dBi) Cable Loss 2.4G(dB) Cable Loss 5G(dB) Connector Type Cable Length (mm) WNC 81.EBJ15.005 PIFA 3.62 Band 1&2: 3.08 Band 3: 4.76 Band 4: 4.76 1.15 Band1&2: 1.70 Band 3: 1.74 Band 4: 1.79 IPEX 300 Note: 1.Above antenna gains of antenna are Total (H+V). 2.The EUT incorporates CDD function with 802.11a/b/g. 3. The EUT incorporates beam forming function with 802.11n Report No.: SA120625E05 7 of 10 Report Format Version 5.0.0 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For 2.4GHz: 802.11b FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 158.908 6.63 20 0.1455 1.00 Directional gain = gain of antenna element + 10 log (# of TX antenna elements) Effective Legacy Gain (dBi)=6.63 802.11g FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 209.481 6.63 20 0.19181 1.00 Directional gain = gain of antenna element + 10 log (# of TX antenna elements) Effective Legacy Gain (dBi)=6.63 802.11n (HT20) FREQUENCY BAND (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) …

Text truncated - open the document above for the full version.

Report No.:RF120625E05-3 1 of 27 Report Format Version 5.0.0 DFS TEST REPORT REPORT NO.: RF120625E05-3 MODEL NO.: QCSWB282 FCC ID: PPD-QCSWB282 IC: 4104A-QCSWB282 RECEIVED: Jun. 25, 2012 TESTED: Sep. 03, 2012 ISSUED: Nov. 06, 2012 APPLICANT: Qualcomm Atheros, Inc. ADDRESS: 1700 Technology Drive, San Jose, CA 95110 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other pe, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.:RF120625E05-3 2 of 27 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD ........................................................................................ 3 1. CERTIFICATION .................................................................................................... 4 2. EUT INFORMATION ............................................................................................... 5 2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT ..................................... 5 2.2 EUT SOFTWARE AND FIRMWARE VERSION ...................................................... 5 2.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT .................................... 6 2.4 EUT MAXIMUM CONDUCTED POWER ................................................................ 7 2.5 EUT MAXIMUM EIRP POWER ............................................................................... 8 2.6 TRANSMIT POWER CONTROL (TPC) .................................................................. 9 2.7 STATEMENT OF MAUNFACTURER ...................................................................... 9 3. U-NII DFS RULE REQUIREMENTS ..................................................................... 10 3.1 WORKING MODES AND REQUIRED TEST ITEMS ............................................ 10 3.2 TEST LIMITS AND RADAR SIGNAL PARAMETERS ........................................... 11 4. TEST & SUPPORT EQUIPMENT LIST ................................................................. 14 4.1 TEST INSTRUMENTS .......................................................................................... 14 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................. 14 5. TEST PROCEDURE ............................................................................................. 15 5.1 BVADT DFS MEASUREMENT SYSTEM: ............................................................. 15 5.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL: ............................... 16 5.3 DEVIATION FROM TEST STANDARD ................................................................. 17 5.4 CONDUCTED TEST SETUP CONFIGURATION .................................................. 17 5.4.1 CLIENT WITHOUT RADAR DETECTION MODE ................................................. 17 6. TEST RESULTS ................................................................................................... 18 6.1 SUMMARY OF TEST RESULTS .......................................................................... 18 6.2 DETAIL TEST RESULTS ...................................................................................... 19 6.2.1 TEST MODE: DEVICE OPERATING IN CLIENT WITHOUT RADAR DETECTION MODE................................................................................................................... 19 6.2.1.1 DFS DETECTION THRESHOLD .......................................................................... 19 6.2.1.2 CHANNEL CLOSING TRANSMISSION AND CHANNEL MOVE TIME ................. 20 6.2.1.3 NON- OCCUPANCY PERIOD .............................................................................. 21 7. INFORMATION ON THE TESTING LABORATORIES .......................................... 24 8. APPENDIX-A ........................................................................................................ 25 9. APPENDIX B - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ................................................................................... 27 Report No.:RF120625E05-3 3 of 27 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF120625E05-3 Original release Nov. 06, 2012 Report No.:RF120625E05-3 4 of 27 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: Low Power 2x2 802.11 a/b/g/n + BT SDIO-WLAN/UART-BT Card BRAND NAME: Qualcomm Atheros MODEL …

Text truncated - open the document above for the full version.

Report No.: RF120625E05-1 R1 1 of 138 Report Format Version 5.0.0 Cancels and replaces the report No.: RF120625E05-1 dated: Nov. 06, 2012 FCC TEST REPORT (WLAN-15.407) REPORT NO.: RF120625E05-1 R1 MODEL NO.: QCSWB282 FCC ID: PPD-QCSWB282 IC: 4104A-QCSWB282 RECEIVED: June 25, 2012 TESTED: Aug. 16 to 28, 2012 ISSUED: Dec. 03, 2012 APPLICANT: Qualcomm Atheros, Inc. ADDRESS: 1700 Technology Drive, San Jose, CA 95110 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF120625E05-1 R1 2 of 138 Report Format Version 5.0.0 Cancels and replaces the report No.: RF1…

Text truncated - open the document above for the full version.