PQC-WLANBV2WLAN Module IEEE 802.11 a/b/g/n

Philips Medizin Systeme Böblingen GmbH Hewlett-Packard-Str. 2, 71034 Böblingen, Germany Telefon +49 (0) 7031 463-0 Telefax +49 (0) 7031 463-2202 Geschäftsführer: Dr. Werner Haas (Sprecher), Michael Dreher, Klaus Baumann Registergericht Stuttgart Reg.-Nr. HRB 245187, Sitz der Gesellschaft: Böblingen www.philips.com/healthcare Page 1 of 3 12-Jun-13 WLANBV2-A WLAN Module User’s Manual Product: WLANBV2-A WLAN Module Model: WLANBV2-A For OEM integration only – device cannot be sold to general public. Therefore we will not supply the User’s manual, the installation manual is the official for OEM. FCC ID: PQC-WLANBV2 IC: 3549C-WLANBV2 We will ask OEM to include the following Notices required by FCC/ IC on the product and in the User’s manual. Notifications FCC ID: PQC-WLANBV2 IC: 3549C-WLANBV2 NOTICE Federal Communication Interference Statement (United States only) This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Re-orient or relocate the receiving antenna • Increase the separation between the equipment and receiver Notifications Page 2 of 3 12-Jun-13 • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Canadian Depertment of Communications Industry Canada Notice (Canada only) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. FCC Rules, Part 15./ Industry Canadian This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference, including interference that may cause undesired operation of this device. Le présent appareil est conforme aux la partie 15 des règles de la FCC et CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : • l'appareil ne doit pas produire de brouillage, et • l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles). Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition dans le Supplément C à OET65 et d’exposition aux fréquences radioélectriques (RF) CNR- 102 de l’IC. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le dispositif rayonnant et le corps (à l’exception des extrémités : mains, poignets, pieds et chevilles). Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential Notifications Page 3 of 3 12-Jun-13 radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. This radio transmitter 3549C-WLANBV2 has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio 3549C-WLANBV2 a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device is going to be operated in 5.15~5.25GHz frequency range, it is restricted in indoor environment only. Antenna in…

Text truncated - open the document above for the full version.

Test report no.: 1-5842/13-01-08 2013-08-06 Page 238 of 251 An nex B Pho tog raphs o f t h e EUT Photo documentation: Photo 1: Interface board with test board and EUT Photo 2: Interface board Test report no.: 1-5842/13-01-08 2013-08-06 Page 239 of 251 Photo 3: Interface board Photo 4: Testboard top view Test report no.: 1-5842/13-01-08 2013-08-06 Page 240 of 251 Photo 5: Testboard bottom view Photo 6: EUT Test report no.: 1-5842/13-01-08 2013-08-06 Page 241 of 251 Photo 7: EUT with Ant M3002-66494 Photo 8: Ant M3002-66494 Test report no.: 1-5842/13-01-08 2013-08-06 Page 242 of 251 Photo 9: Ant M3002-66494 Photo 10: Ant M3002-66494 Test report no.: 1-5842/13-01-08 2013-08-06 Page 243 of 251 Photo 11: Ant M3002-66494 Photo 12: Ant 453564154611 Test report no.: 1-5842/13-01-08 2013-08-06 Page 244 of 251 Photo 13: Ant 453564154611 Photo 14: Ant 453564154611 Test report no.: 1-5842/13-01-08 2013-08-06 Page 245 of 251 Photo 15: Ant 453564154611 Photo 16: Ant 453564175981 Test report no.: 1-5842/13-01-08 2013-08-06 Page 246 of 251 Photo 17: Ant 453564175981 Photo 18: Ant 453564175981 Test report no.: 1-5842/13-01-08 2013-08-06 Page 247 of 251 Photo 19: Ant 453564175981 Photo 20: Ant 453564271931 Test report no.: 1-5842/13-01-08 2013-08-06 Page 248 of 251 Photo 21: Ant 453564271931 Photo 22: Ant 453564271931 Test report no.: 1-5842/13-01-08 2013-08-06 Page 249 of 251 Photo 23: Ant 453564271931 Photo 24: Ant 453564271931

FCC ID: PQC-WLANBV2 IC: 3549C-WLANBV2 Model: WLANBV2-A Prediction of MPE limit at given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S = PG / 4 π R 2 where: S = Power density P = Power input to the antenna G = Antenna gain R = Distance to the center of radiation of the antenna The table below is excerpted from Table 1B of 47 CFR 1.1310 titled “Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure” Frequency Range (MHz) Power Density (mW/cm 2 ) Averaging Time (minutes) 300 -1500 f/1500 30 1500 - 100000 1.0 30 where f = Frequency (MHz) Prediction: P Max power input to the antenna: 18.03 dBm / 63.53 mW R Distance: 20 cm S MPE limit for uncontrolled exposure: 1 mW/cm 2 G Antenna gain: 0.93 numerical Calculated Power density: 0.13 W/m 2 This prediction demonstrates the following: The power density levels at a distance of 20 cm are below the maximum levels allowed by regulations. ______________________ Christoph Schneider Cetecom ICT Services GmbH

2013-08-07 Page 1 of 251 TEST REPORT Test report no.: 1-5842/13-01-08 Testing laboratory Applicant CETECOM ICT Services GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12076-01-01 Area of Testing: Radio/Satellite Communications Philips Medizin Systeme Böblingen GmbH Hewlett-Packard-Strasse 2 71034 Böblingen / GERMANY Fax: +49 7031 463-2442 Contact: Markus Stacha e-mail: [email protected] Phone: +49 7031 463-2840 Manufacturer Philips Medizin Systeme Böblingen GmbH Hewlett-Packard-Strasse 2 71034 Böblingen / GERMANY Test standard/s 47 CFR Part 15 Title 47 of the Code of Federal Regulations; Chapter I Part 15 - Radio frequency devices RSS - 210 Issue 8 Spectrum Management and Telecommunications - Radio Standards Specification Low-power Licence-exempt Radiocommunication Devices (All Frequency Bands): Category I Equipment For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: WLAN Module IEEE 802.11 a/b/g/n Model name: WLANBV2-A FCC ID: PQC-WLANBV2 IC: 3549C-WLANBV2 Frequency: ISM band 2400 MHz to 2483.5 MHz Lowest channel 2412 MHz; highest channel 2462 MHz) Technology tested: WLAN Antenna: 4 different external antennas Power Supply: 3.3 V DC Temperature Range: -10°C to 70°C This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorised: Test performed: p.o. p.o. Stefan Bös Marco Bertolino Senior Testing Manager Testing Manager Test report no.: 1-5842/13-01-08 2013-08-07 Page 2 of 251 1 Table of contents 1 Table of contents ............................................................................................................................................ 2 2 General information ....................................................................................................................................... 3 2.1 Notes and disclaimer .......................................................................................................................... 3 2.2 Application details ............................................................................................................................... 3 3 Test standard/s ............................................................................................................................................... 3 4 Test environment ............................................................................................................................................ 4 5 Test item .......................................................................................................................................................... 4 6 Test laboratories sub-contracted ................................................................................................................. 4 7 Summary of measurement results ............................................................................................................... 5 8 RF measurements .......................................................................................................................................... 6 8.1 Description of test setup .................................................................................................................... 6 8.1.1 Radiated measurements............................................................................................................. 6 8.1.2 Conducted measurements.......................................................................................................... 7 8.2 Additional comments .......................................................................................................................... 7 8.3 RSP100 test report cover sheet / performance test data ................................................................ 9 9 Measurement results .................................................................................................................................... 11 9.1 Antenna gain ...................................................................................................................................... 11 9.2 Maximum output power .................................................................................................................... 14 9.3 Power spectral density ..................................................................................................................... 17 9.4 Spectrum bandwidth – 6 dB ............................................................................................................. 26 9.5 Occupied bandwidth – 99% emission bandwidth .......................................................................... 28 9.6 Band edge compliance conducted .................................................................................................. 29 9.7 Band edge compliance radiated ...................................................................................................... 34 9.8 TX spurious emissions conducted .................................................................................................. 51 9.9 TX spurious emissions radiated ...................................................................................................... 62 9.10 RX spurious emissions radiated ................................................................................................ 209 9.11 Spurious emissions radiated < 30 MHz .............................…

Text truncated - open the document above for the full version.

2013-08-08 Page 1 of 183 TEST REPORT Test report no.: 1-5842/13-01-15 Testing laboratory Applicant CETECOM ICT Services GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12076-01-01 Area of Testing: Radio/Satellite Communications Philips Medizin Systeme Böblingen GmbH Hewlett-Packard-Strasse 2 71034 Böblingen / GERMANY Fax: +49 7031 463-2442 Contact: Markus Stacha e-mail: [email protected] Phone: +49 7031 463-2840 Manufacturer Philips Medizin Systeme Böblingen GmbH Hewlett-Packard-Strasse 2 71034 Böblingen / GERMANY Test standard/s 47 CFR Part 15 Title 47 of the Code of Federal Regulations; Chapter I Part 15 - Radio frequency devices RSS - 210 Issue 8 Spectrum Management and Telecommunications - Radio Standards Specification Low-power Licence-exempt Radiocommunication Devices (All Frequency Bands): Category I Equipment For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: WLAN Module IEEE 802.11 a/b/g/n Model name: WLANBV2-A FCC ID: PQC-WLANBV2 IC: 3549C-WLANBV2 Frequency: ISM band 5725 MHz to 5850 MHz (lowest channel 149 – 5745 MHz, highest channel 165 – 5825 MHz) Technology tested: WLAN (OFDM / a– & n HT20 – mode; OFDM / n HT 40 – mode) Antenna: 4 different external antennas Power Supply: 3.3 V DC Temperature Range: -10°C to 70°C This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorised: Test performed: p.o. Stefan Bös Christoph Schneider Senior Testing Manager Expert Test report no.: 1-5842/13-01-15 2013-08-08 Page 2 of 183 1 Table of contents 1 Table of contents ............................................................................................................................................ 2 2 General information ....................................................................................................................................... 3 2.1 Notes and disclaimer .......................................................................................................................... 3 2.2 Application details ............................................................................................................................... 3 3 Test standard/s ............................................................................................................................................... 3 4 Test environment ............................................................................................................................................ 4 5 Test item .......................................................................................................................................................... 4 6 Test laboratories sub-contracted ................................................................................................................. 4 7 Description of the test setup ......................................................................................................................... 5 7.1 Radiated measurements chamber F .................................................................................................. 5 7.2 Radiated measurements chamber C ................................................................................................. 6 7.3 Radiated measurements 12.75 GHz to 40 GHz ................................................................................. 7 7.4 AC conducted ...................................................................................................................................... 8 7.5 Conducted measurements ................................................................................................................. 8 8 Summary of measurement results ............................................................................................................... 9 9 Additional comments ................................................................................................................................... 10 10 RSP100 test report cover sheet / performance test data .................................................................. 11 11 Measurement results ............................................................................................................................ 13 11.1 Antenna gain .................................................................................................................................. 13 11.2 Maximum output power ................................................................................................................. 16 11.3 Power spectral density .................................................................................................................. 19 11.4 Spectrum bandwidth – 6 dB .......................................................................................................... 25 11.5 Spectrum bandwidth – 20 dB ........................................................................................................ 32 11.6 Band edge compliance conducted .............................................................................................. 38 11.7 Band edge compliance radiated ................................................................................................... 39 11.8 TX spurious emissions conducted .............................................................................................. 40 11.9 TX spurious emission…

Text truncated - open the document above for the full version.

Test report no.: 1-5842/13-01-08 2013-08-06 Page 231 of 251 An nex A Pho tog raphs o f t h e test se tu p Photo documentation: Photo 1: Ant M3002-66494 (Chamber F) Photo 2: Ant M3002-66494 (Chamber F) Test report no.: 1-5842/13-01-08 2013-08-06 Page 232 of 251 Photo 3: Ant 453564154611 (Chamber F) Photo 4: Ant 453564154611 (Chamber F) Test report no.: 1-5842/13-01-08 2013-08-06 Page 233 of 251 Photo 5: Ant 453564175981 (Chamber F) Photo 6: Ant 453564175981 (Chamber F) Test report no.: 1-5842/13-01-08 2013-08-06 Page 234 of 251 Photo 7: Ant 453564271931 (Chamber F) Photo 8: Ant 453564271931 (Chamber F) Test report no.: 1-5842/13-01-08 2013-08-06 Page 235 of 251 Photo 9: Ant M3002-66494 (Chamber C) Photo 10: Ant 453564154611 (Chamber C) Test report no.: 1-5842/13-01-08 2013-08-06 Page 236 of 251 Photo 11: Ant 453564175981 (Chamber C) Photo 12: Ant 453564271931 (Chamber C) Test report no.: 1-5842/13-01-08 2013-08-06 Page 237 of 251 Photo 13: valid for all antenna types (Chamber C) Photo 14: valid for all antenna types (Chamber C)