PQP-WI288PWireless LAN PCI Card

AMD Confidential AMD Alchemy™ Solutions Am1772™ Terminal User's Manual A Development Application for the Am1772™ Mini PCI Reference Design Kit Version 1.03 AMD Confidential © 2002 Advanced Micro Devices, Inc. All rights reserved. The contents of this document are provided in connection with Advanced Micro Devices, Inc. (“AMD”) products. AMD makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. No license, whether express, implied, arising by estoppel, or otherwise, to any intellectual property rights are granted by this publication. Except as set forth in AMD’s Standard Terms and Conditions of Sale, AMD assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. AMD’s products are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of AMD’s product could create a situation where personal injury, death, or severe property or environmental damage may occur. AMD reserves the right to discontinue or make changes to its products at any time without notice. Contacts www.amd.com [email protected] Trademarks AMD, the AMD Arrow logo, Alchemy, and combinations thereof, and Am1770, Am1771, and Am1772 are trademarks of Advanced Micro Devices, Inc. Windows is a registered trademark of Microsoft Corporation. Other product names used in this publication are for identification purposes only and may be trademarks of their respective companies. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio technician for help. FCC Caution: To assure continued compliance.(example-use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the Following two conditions: ( 1 ) This device may not cause harmful interference, and ( 2 ) this Device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. AMD Confidential Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio technician for help. FCC Caution This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm spacing must be provided between computer mounted antenna and person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation. This card cannot be used in laptop computers or other portable configurations and is authorized only for use in devices where the antenna may be installed such that 20 cm may be maintained between the antenna and users. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. AMD Confidential Am1772™ Terminal User’s Manual AMD CONFIDENTIAL: for NDA Use Only Table Of Contents 1 Document History..…

Text truncated - open the document above for the full version.

ADC Frame Composer PCI/CardBus Control Logic BTX BIRX BORX XTAL OSC EEPROM Power Supply Baseband MAC 2.5 V SDATA TXRX_SW ANT_SW 2.5V I/O 1.8 V Core 3.3 V I/O PA_ CTRL Control AGC VCO PLL DAC ADC DAC LNA CLK22 Tx_I Tx_Q Rx_I Rx_Q PA PCI/CardBus Host Interface PCI/ CardBus Media Independent Proprietary Interface Am1770™ RF Transceiver Am1771™ Baseband/MAC Timer Host I/F LED TXRX LEDs

Report No.: 034H034FI Page : 1 of 1 Version:1.0 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo

PRIME ELECTRONICS & SATELLITICS INC. FCC ID.: PQP-WI288P 69, Tung-Yuan Rd., Chung-Li Industrial Park, Chung-Li City, Taoyuan, Taiwan... Tel: 886 3-461-5000 FCC ID AND DoC Label The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below. Wireless LAN PCI Card PESI Model No.: WI288P TESTED TO COMPLY WITH FCC STANDARDS FOR HOME OR OFFICE USE S/N: Made in Taiwan Wireless LAN PCI Card Model No.: WI288P F F C C C C I I D D : : P P Q Q P P - - W W I I 2 2 8 8 8 8 P P This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: Made in Taiwan

PRIME ELECTRONICS & SATELLITICS INC. FCC ID.: PQP-WI288P 69, Tung-Yuan Rd., Chung-Li Industrial Park, Chung-Li City, Taoyuan, Taiwan... Tel: 886 3-461-5000 FCC ID AND DoC Label The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below. Wireless LAN PCI Card PESI Model No.: WI288P TESTED TO COMPLY WITH FCC STANDARDS FOR HOME OR OFFICE USE S/N: Made in Taiwan Wireless LAN PCI Card Model No.: WI288P F F C C C C I I D D : : P P Q Q P P - - W W I I 2 2 8 8 8 8 P P This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: Made in Taiwan

Report No.: 034H034FI Page : 1 of 5 Version:1.0 Attachment 2 : EUT Detailed Photographs (1) EUT Photo Report No.: 034H034FI Page : 2 of 5 Version:1.0 (2) EUT Photo Report No.: 034H034FI Page : 3 of 5 Version:1.0 (3) EUT Photo Report No.: 034H034FI Page : 4 of 5 Version:1.0 (4) EUT Photo (5) EUT Photo Report No.: 034H034FI Page : 5 of 5 Version:1.0 (6) EUT Photo

1.1. Operational Description EUT is a Wireless LAN PCI Card with 11 channels. This device provided four kind of transmitting speed 1,2,5.5 and 11Mbps. The device of RF carrier is DQPSK, DB PSK and CCK. The device adapts direct sequence spread spectrum modulation. The Connector antenna was provides diversity function to improve the receiving function. This Wireless LAN PCI Card is an IEEE 802.11b Wireless LAN adapter. It allows your computer to connect to a wireless network and to share resources, such as files or printers without being bound to the network wires. Operation in 2.4GHz Direst Sequence Spread Spectrum (DSSS) radio transmission, the Wireless LAN PCI Card transfers data at speeds up to 64/128-bit Wired Equivalent Protection (WEP) algorithm is used. In addition, its standard compliance ensures that it can communicate with any 802.11b network.

Report No. 034H034FI Page: 1 of 3 Version: 1.0 RF Exposure Evaluation declaration Product Name: Wireless LAN PCI Card Model No.: WI288P FCC ID.: PQP-WI288P Applicant : PRIME ELECTRONICS & SATELLITICS INC Address : 69, Tung-Yuan Rd., Chung-Li Industrial Park, Chung-Li City, Taoyuan, Taiwan. Date of Receipt : Apr 8, 2003 Date of Declaration: Apr 11, 2003 Report No. : 034H034FI The declaration results relate only to the samples calculated. The declaration shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No. 034H034FI Page: 2 of 3 Version: 1.0 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°Cand 78％ RH. Report No. 034H034FI Page: 3 of 3 Version: 1.0 1.3. Test Result of RF Exposure Evaluation Product : Wireless LAN PCI Card Test Item : RF Exposure Evaluation Test Site : No.1 OATS Test Mode : Normal Operation Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 1.46dBi or 1.40 in linear scale. Output Power Into Antenna & RF Exposure Evaluation Distance: Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density at R = 20 cm (mW/cm 2 ) 1 2412.00 111.1732 0.0310 6 2437.00 117.7606 0.0328 11 2462.00 123.5947 0.0344 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm 2 .

1 2 3 4 5 6 78 ABCD 8 7 6 5 4 3 2 1 D CBA DWG TITLE DWG NO. CHECKEDAPPROVED DATEDATE REV 10-Apr-2003 Joan Size Sheet of File Name: A3 03 C:\PCB\C.P\WI288P\PCB\WI288P.ddb - Documents\41713-82801-03\Sheet1.Sch USED ON DRAWN 12 WI288P WI288P SCHEMATIC DESCRIPTIONS DATE REVISION RECORD REV ECO DATE DATE DRAWN - - - - 41713-82801-01 31-Mar-2003 Joan C41 CS 1 CLK 2 DI 3 DO 4 GND 5 ORG 6 VCC 8 IC4 C54 C50 C46 C52 C48 C51 C27 C38 C56 C60 C59 C58 C39 C31 C32 C40 C43 C44 D3V3D1V8 D3V3 D3V3 D3V3 D3V3 D3V3 LED0_YELN LED0_YELN LED1_GRNN LED1_GRNN D1V8 D3V3 DI0DI1DI2DI3DI4DI5 DI(0..5) DQ0DQ1DQ2DQ3DQ4DQ5 DQ(0..5) TXRX TXRX SDATA SDATA CLK22 CLK22 AGC AGC CCA CCA ANT_DIV ANT_DIV ANT_DIV_L ANT_DIV_L TXRX_SW TXRX_SW TXRX_SW_L TXRX_SW_L RSTN RSTN R15 MP10 R14R13 R12 R19 IN 1 GND 2 EN 3 ADJ 4 OUT 5 IC8 IN 1 GND 2 EN 3 ADJ 4 OUT 5 IC7 C55C45 C47 C53 C57 C63 C61 C62 C49 D3V3 D1V8 D2V5 D2V5 D2V5 INTA_L A8 CBE_LO R3 CBE_L1 M1 CBE_L2 G1 CBE_L3 B2 STOP_L L2 DEVSEL_L M2 IDSEL C1 PCLK A7 RST_L B7 ADO P7 AD1 R7 AD2 P6 AD3 R6 AD4 R5 AD5 P5 AD6 R4 AD7 P4 AD8 P3 AD9 R2 AD10 R1 AD11 P2 AD12 P1 AD13 N3 AD14 N2 AD15 N1 AD16 G2 AD17 F1 AD18 F2 AD19 D2 AD20 E1 AD21 C2 AD22 D1 AD23 C3 AD24 B1 AD25 B3 AD26 A1 AD27 A3 AD28 A2 AD29 A4 AD30 B4 AD31 A5 REQ_L A6 GNT_L B6 PAR E2 PERR_L L1 SERR_L K1 IRDY_L H1 TRDY_L K2 FRAME_L J2 PCIMODE B5 CLKRUN_L J1 MPCIACT_L R8 PowerManagement ElEPROM ELEDO G15 EEDI G14 EESK F15 EECS F14 VSS_CORE-1 G7 VSS_CORE-8 G8 VSS_CORE-2 G9 VSS_CORE-3 H7 VSS_CORE-4 H8 VSS_CORE-5 H9 VSS_CORE-6 J7 VSS_CORE-7 J8 VSSIO_2.5-4 M13 VSSIO_2.5-1 N13 VSSIO_2.5-2 P9 VSSIO_2.5-3 R9 VSSIO_3.3-1 B8 VSSIO_3.3-8 C4 VSSIO_3.3-9 C9 VSSIO_3.3-2 C13 VSSIO_3.3-7 D4 VSSIO_3.3-3 E4 VSSIO_3.3-4 F6 VSSIO_3.3-5 F10 VSSIO_3.3-6 G3 VSSIO_3.3-16 H6 VSSIO_3.3-10 H10 VSSIO_3.3-11 J3 VSSIO_3.3-12 J10 VSSIO_3.3-13 K10 VSSIO_3.3-14 M3 VSSIO_3.3-15 N8 DI0 P11 DI1 R12 DI2 P12 DI3 R13 DI4 P13 DI5 R14 DQ0 P14 DQ1 R15 DQ2 P15 DQ3 N14 DQ4 N15 DQ5 M14 TXRX L15 SDATA L14 CLK_22 M15 AGC_ACTIVE P10 CCA_ED R11 ANT_SEL J15 ANT_SEL_L J14 TXRX_SW K15 TXRX_SW_L K14 RFE_RST_L R10 PA_CTRL0 H14 PA_CTRL1 H15 LED1_L B15 RXD1 D12 RXD2 A15 RXD3 A14 TXD0 B11 TXD1 A11 TXD2 B10 TXD3 A10 LED0_L E14 RX_DV D13 TX_EN A12 TX_ER C10 TX_CLK B12 MDIO B13 MDC A13 LED3_L C15 LED2_L D14 XBB_RST_L E13 SCAN_IN0 C5 SCAN_IN1 C6 SCAN_IN2 C7 SCAN_IN3 C8 SCAN_IN4 B9 SCAN_IN5 A9 SCAN_IN6 C12 SCAN_IN7 C11 SCAN_OUT0 F13 SCAN_OUT1 D15 SCAN_OUT2 E15 SCAN_OUT3 G13 SCAN_OUT4 H13 SCAN_OUT5 G10 SCAN_OUT6 J13 SCAN_OUT7 N6 SCAN_EN N7 TEST0 L13 TEST1 L12 TEST2 M12 TEST3 N11 HIF_MCLK_TEST P8 Am1771 TEST SCANWMIIBB-RF IC6 PCI VCC_CORE-1 F7 VCC_CORE-2 F9 VCC_CORE-3 G6 VCC_CORE-4 J6 VCC_CORE-5 J9 VCC_CORE-6 K6 VCC_CORE-7 K7 VCC_CORE-8 K8 VCCIO_2.5-1 K13 VCCIO_2.5-2 N9 VCCIO_2.5-3 N12 VCCIO_2.5-4 N10 VCCIO_3.3-1 B14 VCCIO_3.3-2 C14 VCCIO_3.3-3 D3 VCCIO_3.3-4 E3 VCCIO_3.3-5 F3 VCCIO_3.3-6 F8 VCCIO_3.3-7 H2 VCCIO_3.3-8 H3 VCCIO_3.3-9 K3 VCCIO_3.3-10 K9 VCCIO_3.3-12 M4 VCCIO_3.3-13 M5 VCCIO_3.3-14 N4 VCCIO_3.3-15 N5 VCCIO_3.3-11 L3 IC6 C64 A1A2A3A4A5 A6 A7A8A9A10A11A12A13A14 A15 A16 A17A18 A19 A20 A21 A22A23A24A25A26 A27 A28A29 A30 A31A32 A33 A34 A35 A36 A37 A38 A39A40A41A42 A43A44 A45 A46A47 A48 A49 A50A51 A52 A53 A54A55 A56 A57A58 A59A60A61A62B1B62B2B61 B3 B60B4B59B5 B58 B6 B57 B7 B56 B8 B55 B9B54B10 B53 B11 B52 B12B51B13B50B14 B49B15B48B16B47B17B46B18B45 B19 B44B20 B43 B21B42B22 B41 B23B40B24 B39B25 B38B26B37B27 B36 B28B35B29B34B30B33 B31 B32 P1 C68 C67 CCAAGCRSTNDI(0..5)DQ(0..5)CLK22SDATATXRXANT_DIVANT_DIV_LTXRX_SWTXRX_SW_LIN Sheet2Sheet2.Sch D3V3 R2R3R16R18 1 2 3 4 56 ABCD 6 5 4 3 2 1 D CBA DWG TITLE DWG NO. CHECKEDAPPROVED DATEDATE REV 10-Apr-2003 Joan Size Sheet of File Name: B 03 C:\PCB\C.P\WI288P\PCB\WI288P.ddb - Documents\41713-82801-03\Sheet2.Sch USED ON DRAWN 22 WI288P WI288P SCHEMATIC DESCRIPTIONS DATE DATE DRAWN - - - - 41713-82801-01 31-Mar-2003 Joan AVSS1 1 AVDD1 2 AVDD2 3 AVSS2 4 AVSS3 5 ANT 6 AVSS4 7 TX_OUTP 8 TX_OUTN 9 AVSS5 10 AVSS6 11 AVDD3 12 TXRX 13 SDATA 14 TST 15 CLK44 16 VSS1 17 CLK22 18 VDD1 19 VSS2 20 DQ1 26 DQ2 24 DQ3 23 DQ4 22 DQ5 21 VDD2 25 DQ0 27 VSS3 28 DI0 35 DI1 34 DI2 32 DI3 31 DI4 30 DI5 29 VDD3 36 VDD4 33 CCA_DE 37 ACC_ACTIVE 38 RSTN 39 VREF 40 AVSS7 41 VCO_VDD 42 AVDD4 43 TSTIN 44 TSTIP 45 TSTON 46 TSTOP 47 AVSS8 48 IC5 C18 C20C17 CCA AGC CCA AGC C36 C35 C29C26C24C23 C34C33 C30 C28 OE 1 GND 2 CLK 3 VCC 4 Q1 1 1 2 2 C22 C21 DR1 C25 RSTN DI(0..5) DQ(0..5) CLK22 SDATA TXRX RSTN CLK22 SDATA TXRX MP1 MP2 MP3 MP4 MP5 MP6 MP7 MP8MP9 C11C13 TXRX_SW TXRX_SW_L TXRX_SW_L TXRX_SW 1 1 2 2 3 3 4 4 BF1 123 465 IC3 R6R5 C14 12345 67891011 IC2 L1C4 W=5 L=359 C3 R1 R4 C10 C12 C8 C6 C9 R7 R8 R9 C16C15 1 2 34 5 6 L2 R17 R11 R10 DI0DI1DI2DI3DI4DI5 DQ0DQ1DQ2DQ3DQ4DQ5 DI(0..5) DQ(0..5) IN IN D2V5 D2V5 D2V5 D3V3 1 1 2 2 3 3 4 4 5 5 ANT1 L3

Report No. 034H034FI Page: 1 of 34 Version:1.0 Test Report Product Name : Wireless LAN PCI Card Model No.: WI288P FCC ID.: PQP-WI288P Applicant : PRIME ELECTRONICS & SATELLITICS INC Address : 69, Tung-Yuan Rd., Chung-Li Industrial Park, Chung-Li City, Taoyuan, Taiwan. Date of Receipt : Apr 8, 2003 Date of Test : Apr 11, 2003 Report No. : 034H034FI The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Report No. 034H034FI Page: 2 of 34 Version:1.0 Test Report Certification Test Date : Apr 11, 2003 Report No. : 034H034FI The Test Results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Product Name : Wireless LAN PCI Card Applicant : PRIME ELECTRONICS & SATELLITICS INC Address : 69, Tung-Yuan Rd., Chung-Li Industrial Park, Chung-Li City, Taoyuan, Taiwan. Manufacturer : PRIME ELECTRONICS & SATELLITICS INC Model No. : WI288P FCC ID. : PQP-WI288P Rated Voltage : DC 3.3V(Power By PC) Trade Name : PESI Measurement Standard : FCC Part 15 Subpart C Paragraph 15.247 Measurement Procedure : ANSI C63.4: 1992 Test Result : Complied Documented By : ( Lydai Tsai ) Tested By : ( Jim Wu ) Approved By : ( Kevin Wang ) Accredited by NIST (NVLAP) NVLAP Lab Code: 200347-0 Report No. 034H034FI Page: 3 of 34 Version:1.0 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION .....................................................................................................4 1.1. EUT Description............................................................................................................................4 1.2. Operational Description ................................................................................................................5 1.3. Tested System Datails....................................................................................................................6 1.4. Configuration of tested System .....................................................................................................7 1.5. EUT Exercise Software .................................................................................................................7 1.6. Test Facility ...................................................................................................................................8 2. Conducted Emission....................................................................................................................9 2.1. Test Equipment..............................................................................................................................9 2.2. Test Setup ......................................................................................................................................9 2.3. Limits ............................................................................................................................................9 2.4. Test Procedure .............................................................................................................................10 2.5. Test Result of Conducted Emission.............................................................................................11 3. Peak Power Output ...................................................................................................................13 3.1. Test Equipment............................................................................................................................13 3.2. Test Setup ....................................................................................................................................13 3.3. Limits ..........................................................................................................................................13 3.4. Test Result of Peak Power Output...............................................................................................14 4. Radiated Emission .....................................................................................................................15 4.1. Test Equipment............................................................................................................................15 4.2. Test Setup ....................................................................................................................................15 4.3. Limits ..........................................................................................................................................16 4.4. Test Procedure .............................................................................................................................17 4.5. Test Result of Radiated Emission................................................................................................18 5. Band Edge ..................................................................................................................................24 5.1. Test Equipment............................................................................................................................24 5.2. Test Setup ....................................................................................................................................24 5.3. Limits ..........................................................................................................................................25 5.4. Test Procedure .............................................................................................................................25 5.5. Test Result of Band Edge ...........................................................................................................…

Text truncated - open the document above for the full version.

Report No.: 034H034FI Page : 1 of 3 Version:1.0 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 034H034FI Page : 2 of 3 Version:1.0 Front View of Radiated Test Back View of Radiated Test Report No.: 034H034FI Page : 3 of 3 Version:1.0 Front View of Radiated Test (Horn)