PQP-WM233GWireless LAN 11g mini-PCI adapter

Prime Electronics & Satellitics Inc.

Click to zoom

Application Details

Equipment Class: DTS - Digital Transmission System
Date of Grant: Aug 11, 2004
Application Purpose: Original Equipment
Date of Application: Aug 11, 2004
Equipment Note: Wireless LAN 11g mini-PCI adapter
Frequency Range: 2412.00000000 - 2462.00000000
Company: Prime Electronics & Satellitics Inc.
Country: Taiwan

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

33333333 百一電子股份有限公司 PRIME ELECTRONICS & SATELLITICS INC. 69, TUNG-YUAN RD., CHUNG-LI INDUSTRIAL PARK, CHUNG-LI CITY 320, TAO-YUAN COUNTY, TAIWAN. 中壢巿中壢工業區東園路69號 TEL: +886-3-461-5000 FAX: +886-3-461-4000 W W i i r r e e l l e e s s s s L L A A N N 1 1 1 1 g g M M i i n n i i P P C C I I A A d d a a p p t t e e r r M M o o d d e e l l n n a a m m e e : : W W M M 2 2 3 3 3 3 G G User Manual Version: 2.0 (June. 2004) Wireless LAN 11g Mini PCI Adapter I Copyright Copyright  2004 by this company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Any software described in this manual is sold or licensed "as is". Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Further, this company reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes. All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders. Wireless LAN 11g Mini PCI Adapter II Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio technician for help. FCC Caution This equipment complies with FCC radiation exposure limits. However, in order to avoid the possibility of exceeding the FCC exposure limits, this device and its antenna should not be co-located or operating in conjunction with any other antenna or transmitter.” This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. For OEM integrators, the manual for the OEM integrators must include some instructions to be followed by the end users in the user manual. For example: The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. The OEM integrators must be instructed about the end product labeling (“Contains TX FCC ID: PQP-WM233G”) This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as the 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end product for any other additional compliance requirements required with this module installed (for example, digital Wireless LAN 11g Mini PCI Adapter III device emissions, PC peripheral requirements, etc.) IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluate the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and end users (for example, access points, router, wireless ADSL modems, and similar equipment). The final end product must be labeled in a visible area with the following: “Contains TX FCC ID: PQP- WM-233G”. Notice for OEM integrator Following RF exposure info shall be supplied in end-users manual depends on the application. For mobile configuration of RF Exposure Information: IMPORTANT NOTE: To…

Text truncated - open the document above for the full version.

Block Diagram

1 2 34 ABCD 4 3 2 1 D CBA DWG TITLE DWG NO. CHECKEDAPPROVED DATEDATE REV Size Sheet of File Name: A4 01 C:\Documents and Settings\joan\My Documents\WM233g.ddb.ddb - Documents\Sheet1.Sch USED ON DRAWN 11 WM233 G Wireless LAN 11g miniPCI adapter WM233 G BLOCK DIAGRAM DATE DATE ISSUED DATE CHECKED DATE APPROVED

Cover Letter(s)

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 August 9, 2004 RE: Prime Electronics and Satellites FCC ID: PQP-WM233G I have a few comments on this Application. Depending on your responses, kindly understand there may be additional comments. 1.) Please provide a revised Restricted Band Edge test per my earlier August 9, 2004 email. 2.) This filing seems a bit confused. You are asking for a Limited Modular Approval, but it is not how and in what way the filing is limited. All the basic requirements of DA 00-1407 seem to be in place. Please explain how this qualifies as a Limited Modular Approval. 3.) Regardless of whether this is a full or limited modular approval; the Manual appears written for the general public. This is not allowed – only modular approvals to OEM integrators who can install the final installation in a proper, safe manner are permitted. Please provide a detailed installation procedure showing how OEM integrators can satisfy the RF category “Mobile” radio frequency exposure guidelines. 4.) Does the Applicant request any exhibits be held Confidential? If so, please supply a Confidentiality Request letter. Typical exhibits to be considered usually include Block Diagram and Schematics. 5.) Kindly provide larger and clearer Internal Photographs. The supplied photos are not completely satisfactory. William H. Graff President and Director of Engineering mailto: [email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

External Photos

ID Label/Location Info

Wireless LAN 11g mini PCI Adapter FCC ID: PQP-WM233G Made in China 802.11g Compliant 54Mbps Data Transfer Rate Certified for FCC Part 15 Class B 0678

Internal Photos

Operational Description

GESTEK Lab Report #: 0406089 ID N0 3, Pau-Tou-Tsuo Valley, Chia-Pau Tsuen, Lin Kou Hsiang, Taipei County, Taiwan, R.O.C. Tel:886-2-2603-5321 Fax:886-2-2603-5325 Accredited Lab. Of BSMI, DNV, NEMKO, NVLAP. Page 5 of 74 Rev. 1 Listed Lab. of AUSTEL, Commerce, FCC, VCCI. NVLAP Lab Code:200085-0 2.2 OPERATIONAL DESCRIPTION The EUT is Mini PCI interface and certification Modular Approval . The EUT powered by notebook. This EUT has two type antenna and non-simultaneously connect in PCB. The final test is chose 5dBi antenna. The other instruction, please look at user manual. This is a digital transmission system (DTS) and have four type of modulation DBPSK, DQPSK, CCK/OFDM. The data rate are 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54Mbps The equipment enables high-speed access without wires to network assets. This adapter uses the IEEE 802.11g protocol to enable wireless communications between the host computer and other computers. GESTEK Lab Report #: 0406089 ID N0 3, Pau-Tou-Tsuo Valley, Chia-Pau Tsuen, Lin Kou Hsiang, Taipei County, Taiwan, R.O.C. Tel:886-2-2603-5321 Fax:886-2-2603-5325 Accredited Lab. Of BSMI, DNV, NEMKO, NVLAP. Page 6 of 74 Rev. 1 Listed Lab. of AUSTEL, Commerce, FCC, VCCI. NVLAP Lab Code:200085-0 2.3 TEST MODES & EUT COMPONENTS DESCRIPTION The EUT will certification with two antenna and two antenna’s cable. The final test is chose 5dBi antenna with 100mm length cable for final test. List below Manufacturer Model NubmerAntenna Type Antenna Gain ANT 1 Full Rise Electronic CO., LTDAN-G1-XDC 1/4 Dipole sleev 5dBi ANT 2 Wanshih Electronic CO., LTDWSS002 1/4 Dipole sleev 2dBi Manufacturer Model Nubmer Cable Length Cable Loss Cable 1 Shen ChyunCO., LTD Mini coaxial cable A’ssy151mm 0.94dBi Cable 2 Wanshih Electronic CO, LTD RG178 cable Assembly100mm 0.55dBi Mode 1 Mode 2 Test Mode 802.11b: 11Mbps 802.11g: 54Mbps

RF Exposure Info

GESTEK Lab Report #: 0406089 N0 3, Pau-Tou-Tsuo Valley, Chia-Pau Tsuen, Lin Kou Hsiang, Taipei County, Taiwan, R.O.C. Tel:886-2-2603-5321 Fax:886-2-2603-5325 Accredited Lab. Of BSMI, DNV, NEMKO, NVLAP. Page 1 of 4 Rev. 1 Listed Lab. of AUSTEL, Commerce, FCC, VCCI. NVLAP Lab Code:200085-0 RF EXPOSURE EVALUATION DECLARATION PRIME ELECTRONICS & SATELLITICS INC. EUT: Wireless LAN 11g mini PCI adapter Model Number: WM233G FCC ID: PQP-WM233G Prepared for: PRIME ELECTRONICS & SATELLITICS INC. No. 69, Tung-Yuan Rd., Chung-Li Industrial Park, Chung-Li City 320, Taoyuan, Taiwan Report By : Global EMC Standard Tech. Corp. No.3 Pau-Tou-Tsuo Valley, Chia-Pau Tsuen, Lin Kou Hsiang, Taipei County, Taiwan, R.O.C. Tel : (02) 2603-5321 Fax : (02) 2603-5325 1.Test results given in this report only relate to the specimen(s) tested, measured. 2.This report is the property of GesTek, and shall not be reproduced, other than in full, without the written consent of GesTek. 3.The report must not be used by the client to claim product certification, approval, or endorsement by any agency of the federal government. 4.All data in this report are traceable to national standard or international standard. GESTEK Lab Report #: 0406089 N0 3, Pau-Tou-Tsuo Valley, Chia-Pau Tsuen, Lin Kou Hsiang, Taipei County, Taiwan, R.O.C. Tel:886-2-2603-5321 Fax:886-2-2603-5325 Accredited Lab. Of BSMI, DNV, NEMKO, NVLAP. Page 2 of 4 Rev. 1 Listed Lab. of AUSTEL, Commerce, FCC, VCCI. NVLAP Lab Code:200085-0 1. RF EXPOSURE EVALUATION 1.1. LIMITS According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 1.2. TEST PROCEDURE Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. GESTEK Lab Report #: 0406089 N0 3, Pau-Tou-Tsuo Valley, Chia-Pau Tsuen, Lin Kou Hsiang, Taipei County, Taiwan, R.O.C. Tel:886-2-2603-5321 Fax:886-2-2603-5325 Accredited Lab. Of BSMI, DNV, NEMKO, NVLAP. Page 3 of 4 Rev. 1 Listed Lab. of AUSTEL, Commerce, FCC, VCCI. NVLAP Lab Code:200085-0 1.3. TEST RESULT OF RF EXPOSURE EVALUATION Date of Test June 23, 2004 Temperature 23 deg/C EUT Wireless Lan 11g mini PCI adapterHumidity 56 %RH Working Cond. 802.11b Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 5dBi or 3.16 in linear scale. Output Power Into Antenna & RF Exposure Evaluation Distance: Channel No. Frequency (MHz) Output Power to Antenna (mW) Power Density at R = 20 cm (mW/cm 2 ) 1 2412.00 66.9885 0.0421 6 2437.00 70.1455 0.0441 11 2462.00 63.5331 0.0400 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm 2 . GESTEK Lab Report #: 0406089 N0 3, Pau-Tou-Tsuo Valley, Chia-Pau Tsuen, Lin Kou Hsiang, Taipei County, Taiwan, R.O.C. Tel:886-2-2603-5321 Fax:886-2-2603-5325 Accredited Lab. Of BSMI, DNV, NEMKO, NVLAP. Page 4 of 4 Rev. 1 Listed Lab. of AUSTEL, Commerce, FCC, VCCI. NVLAP Lab Code:200085-0 Date of Test June 23, 2004 Temperature 23 deg/C EUT Wireless Lan 11g mini PCI adapterHumidity 56 %RH Working Cond. 802.11g Antenna Gain Antenna Gain: The maximum Gain measured in fully anechoic chamber is 5dBi or 3.16 in linear scale. Output Power Into Antenna & RF Exposure Evaluation Distance: Channel No. Frequency (MHz) Output Power to Antenna (mW) Power Density at R = 20 cm (mW/cm 2 ) 1 2412.00 81.2831 0.0511 6 2437.00 85.9014 0.0540 11 2462.00 76.2079 0.0479 The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm 2 .

RF Exposure Info

SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.01 of 37 Part No.: E421C-5000G1 Product Description: ANTENNA 2.4G 5dBi(GAT2) Customer : Customer Part No.: Sample Qty. FRE Issued ByChecked BYQA Inspection Warren Chung Dec-15-2003 Sales&Marketing GroupR&D GroupQA Group Customer Customer Approval:ApprovedConcessionaryRejected Issued ByChecked BYApproved By Comments: SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.02 of 37 CATALOGUE OF E421C-5000G1 APPROVAL SHEETS ITEM/CONTENTPAGE 1.Coverage1 2.Index2 3.Product Drawing3 4.Specification & Performance4~7 5.Electrical Properties8~16 6.Mechanical Performance17~19 7.Environmental Performance20~21 8.Material Identification22~35 9.SGS Test Report36 10. ISO 9001:2000 Certification37 λ λ SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.04 of 37 Approved Checked Written By 2002122 2002/12/02 Rev.:1 ANTENNA APPROVAL SHEET Elvis Liang Warren Chung Jet Lee 1. (Generation) 1.1 FREE42 Series ISM Band Application Field: This approval sheet only use for FRE development E42 Series Wireless LAN antenna of ISM Band. 1.2 -20 ~ 65 Operation : -20 ~ 65 1.3 -30 ~ 75 Storage : -30 ~ 75 1.4 5 ~ 35 45 ~ 85%860 ~ 1060 hpa 20 2 65 5%860 ~ 1060hpa Test Condition: T=5 ~ 35 , Humidity=45 ~ 85%. If any doubt and you could test under the following standard T= 20 2 , Humidity = 655% , Atmosphere=860 ~ 1060hpa 2. (Appearance , Construction , Dimension) 2.1 Appearance : Good manufacture of each parts and without rusting,cracking,defect...etc to damage product. 2.2 Construction, Dimension: According to each product drawing 3. Mechanical Performance ITEMTEST CONDITIONSPECIFICATION 3.1 Twist Life 9012 500 To rotate 90 of left & right as a cycle and totally need to test 500 cycles via 12 cycle/minute The housing after test shall be no functional damage. 3.2 Tensile-Housing 5 kgfcm To obey the rotary arrow direction to wrench with 5Kgf.cm within 3sec No loosen of the Housing. SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.05 of 37 3.3 Vibration 10 ~ 55 ~ 10 Hz/ 1.5 mm XYZ26 Ratio: 10-50-10 Hz/minute. Vibration amplitude:1.5 mm To vibrate 2 hrs on X,Y,Z direction(Totally 6 hrs) 4.1& 4.2 No abnormal of appearance, construction, mechanical. Meet electrical request(Item 4.1&4.2) 3.4 Tensile of Coaxial Cable 1 kgf To load 1Kgf weight within 1 minute. No fall of Coaxial cable. Remarks: This test only for pigtail type. 4. Electrical Properties ITEMTEST CONDITIONSPECIFICATION 4.1 VSWR 2.02.0 Max. (2.4 GHz ~ 2.5 GHz) 4.2 Return Loss -10 dB -10 dB Max. (2.4 GHz ~ 2.5 GHz) 4.3 Impedance 50 4.4 Certain direction Uncertain direction 4.5 Max GAIN (VSWR & Return Loss To detect on any space. (VSWR & Return Loss testing to read next figure for ref.) 5 dBi 5 dBi Min. SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.06 of 37 5. Environmental Performance ITEMTEST CONDITIONSPECIFICATION 5.1 Temperature Life 60 296 1 To put antenna at 602 within 96 hrs then take it out to put at normal environment within 1 hour later to detect. 5.2 Cold -10 296 1 To keep in -102 within 96hrs and take out to put at normal environment within 1 hour later to detect. 5.3 Humidity ( Stable ) +40 290 ~ 95%96 1 To keep in +402 , damp=90~95% within 96 hrs and take it out to put at normal environment within 1 hour later to detect. 5.4 Thermal Shock -20+6011 101 To put antenna at -20 & +60 and each degree for 1 hour as a cycle , totally need to repeat 10 cycles then put at normal environment within 1 hour later to detect. 4.1& 4.2 No abnormal of appearance, construction, mechanical. Meet electrical request( Item 4.1& 4.2) SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.07 of 37 ( (Remarks) Testing equipments (equipment)Agilent Network Analyzer HP-8753ES (Manufacturer)(FRE) FULL RISE ELECTRONIC CO.,LTD. (Ping Chen, Taoyung , Taiwan) FULL RISE ELECTRONIC CO.,LTD.(Baoan District, Shenzhen City, China) SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.08 of 37 Electrical Properties: 1. Frequency Range: 2.4 ~ 2.5 GHz 2. Impedance: 50 Ohms nominal 3. VSWR: 2.0 max. IN BAND 4. Gain :>5 dBi,Vertical direction Test Result: 1.V.S.W.R(For Specification 4.1): 2.0 Frequency2.4 GHz2.45 GHz2. 5 GHz Sample 11.6311.2281.574 Sample 21.6231.3021.667 Sample 31.5391.3241.737 Sample 41.4291.2941.797 Sample 51.6141.2831.584 V.S.W.R Profiles SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.09 of 37 2.Return Loss(For Specification 4.2): -10 dB Frequency2.4 GHz2.45 GHz2. 5 GHz Sample 1-12.47 dB-20.36 dB-13.06 dB Sample 2-12.52 dB-17.81 dB-12.08 dB Sample 3-13.31 dB-17.02 dB-11.29 dB Sample 4-12.49 dB-17.96 dB-12.82 dB Sample 5-11.67 dB-17.38 dB-12.53 dB Return Loss Profiles SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.010 of 37 3. Gain (For Specification 4.5): >5 dBi 2.4 GHz H-Plain Field Pattern SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.011 of 37 2.45 GHz H-Plain Field Pattern SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.012 of 37 2.5 GHz H-Plain Field Pattern SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.013 of 37 2.4 GHz E-Plain Field Pattern SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.014 of 37 2.45GHz E-Plain Field Pattern SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.015 of 37 2.5GHz E-Plain Field Pattern

RF Exposure Info

SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.016 of 37 l Mechanical Performance: 1. Twist Life(For Specification 3.1): STD: 500 cycles min. The housing after test shall be not functional damage. InitialAfter Twist life Sample 1OKOK Sample 2OKOK Sample 3OKOK Sample 4OKOK Sample 5OKOK 2. Tensile of Coaxial Cable(For Specification 3.4): STD: load 1Kgf / 1 minute. No fall of Coaxial cable. InitialAfter Twist life Sample 1OKOK Sample 2OKOK Sample 3OKOK Sample 4OKOK Sample 5 OKOK 3. Tensile-Housing (For Specification 3.2): STD: 5 kgfcm / 3 second No loosen of resin tube. InitialAfter Twist life OVER 10 kgf Sample 1OKOKOK Sample 2OKOKOK Sample 3OKOKOK Sample 4OKOKOK Sample 5OKOKOK SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.017 of 37 4.Vibration (For Specification 3.3): (Frequency:10-55-10HZ/min) (Amplitude:1.52mm) (Period:2 hours for each XY and Z axis directions ; in total:6 hours) Test Result: (V.S.W.R: 2.0) Frequency 2.4 GHz2.45 GHz2.5 GHz Before Vibration Test 1.6311.2281.574 1 After Vibration Test1.6621.2161.582 Before Vibration Test 1.6231.3021.667 2 After Vibration Test1.6111.3441.647 Before Vibration Test 1.5391.3241.737 3 After Vibration Test1.5111.3941.762 Before Vibration Test 1.4291.2941.797 4 After Vibration Test1.4651.3681.728 Before Vibration Test 1.6141.2831.584 5 After Vibration Test1.6451.3861.600 Test Result: Return Loss: -10 dB Frequency 2.4 GHz2.45 GHz2. 5 GHz Before Vibration Test -12.47 dB-20.36 dB-13.06 dB 1 After Vibration Test-11.71 dB-20.02 dB-12.62 dB Before Vibration Test -12.52 dB-17.81 dB-12.08 dB 2 After Vibration Test-12.42 dB-16.01 dB-12.11 dB Before Vibration Test -13.31 dB-17.02 dB-11.29 dB 3 After Vibration Test-13.06 dB-16.07 dB-11.02 dB Before Vibration Test -12.49 dB-17.96 dB-12.82 dB 4 After Vibration Test-12.21 dB-16.11 dB-12.64 dB Before Vibration Test -11.67 dB-17.38 dB-12.53 dB 5 After Vibration Test-11.06 dB-17.26 dB-12.03 dB SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.018 of 37 Environmental Performance: 1.Temperature Life(For Specification 5.1): 96 hours at 60±2 Test Result: (V.S.W.R: 2.0) Frequency2.4 GHz2.45 GHz2. 5 GHz Before Temperature Life Test 1.6321.2251.576 1 After Temperature Life Test1.6911.2331.589 Before Temperature Life Test 1.6251.3001.661 2 After Temperature Life Test1.6621.3411.681 Before Temperature Life Test 1.5381.3241.732 3 After Temperature Life Test1.5251.3661.766 Before Temperature Life Test 1.4261.2981.796 4 After Temperature Life Test1.4521.2811.781 Before Temperature Life Test 1.6131.2871.581 5 After Temperature Life Test1.6911.2861.627 Test Result: Return Loss: -10 dB Frequency2.4 GHz2.45 GHz2. 5 GHz Before Temperature Life Test -12.49 dB-20.32 dB-13.02 dB 1 After Temperature Life Test-11.76 dB-20.29 dB-13.29 dB Before Temperature Life Test -12.53 dB-17.86 dB-12.09 dB 2 After Temperature Life Test-11.61 dB-17.51 dB-11.24 dB Before Temperature Life Test -13.30 dB-17.05 dB-11.27 dB 3 After Temperature Life Test-13.09 dB-16.75 dB-11.31 dB Before Temperature Life Test -12.44 dB-17.94 dB-12.86 dB 4 After Temperature Life Test-12.40 dB-17.20 dB-12.60 dB Before Temperature Life Test -11.65 dB-17.36 dB-12.55 dB 5 After Temperature Life Test-11.16 dB-17.11 dB-12.16 dB SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.019 of 37 2.(For Specification 5.2)± 2 Test Result: (V.S.W.R: 2.0) Frequency2.4 GHz2.45 GHz2.5 GHz Before Cold Test1.6301.2221.573 1 After Cold Test 1.6961.2341.580 Before Cold Test1.6221.3051.661 2 After Cold Test 1.6201.3521.689 Before Cold Test1.5371.3281.739 3 After Cold Test 1.5901.3721.785 Before Cold Test1.4281.2991.798 4 After Cold Test 1.4591.3511.721 Before Cold Test1.6131.2851.585 5 After Cold Test 1.6771.2891.516 Test Result: Return Loss: -10 dB Frequency2.4 GHz2.45 GHz2. 5 GHz Before Cold Test-12.48 dB-20.35 dB-13.05 dB 1 After Cold Test -12.70 dB-20.36 dB-16.02 dB Before Cold Test-12.53 dB-17.82 dB-12.07 dB 2 After Cold Test -11.61 dB-17.94 dB-12.18 dB Before Cold Test-13.30 dB-17.03 dB-11.27 dB 3 After Cold Test -13.01 dB-17.66 dB-11.28 dB Before Cold Test-12.48 dB-17.97 dB-12.84 dB 4 After Cold Test -11.92 dB-16.01 dB-11.57 dB Before Cold Test-16.72 dB-18.08 dB-15.32 dB 5 After Cold Test-15.67 dB-17.38 dB-15.53 dB SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.020 of 37 3.Humidity(For Specification 5.3): 96 hours at 40 ± 2, 90 ~ 95RH Test Result: (V.S.W.R: 2.0) Frequency2.4 GHz2.45 GHz2. 5 GHz Before Humidity Test1.6611.2381.564 1 After Humidity Test 1.6651.2471.580 Before Humidity Test1.6331.3221.657 2 After Humidity Test 1.6311.3541.646 Before Humidity Test1.5491.3141.757 3 After Humidity Test 1.5561.3541.794 Before Humidity Test1.4191.2841.787 4 After Humidity Test 1.4491.3481.718 Before Humidity Test1.6041.2631.574 5 After Humidity Test 1.6701.2971.608 Test Result: Return Loss: -10 dB Frequency2.4 GHz2.45 GHz2. 5 GHz Before Humidity Test-12.57 dB-20.26 dB-13.16 dB 1 After Humidity Test -11.71 dB-20.39 dB-13.25 dB Before Humidity Test-12.62 dB-17.91 dB-12.18 dB 2 After Humidity Test -11.61 dB-17.56 dB-12.20 dB Before Humidity Test-13.21 dB-17.22 dB-11.39 dB 3 After Humidity Test -13.03 dB-16.62 dB-11.05 dB Before Humidity Test-12.69 dB-17.86 dB-12.92 dB 4 After Humidity Test -11.82 dB-17.08 dB-12.51 dB Before Humidity Test-11.57 dB-17.28 dB-12.23 dB 5 After Humidity Test -11.23 dB-17.11 dB-12.17 dB SPECIFICATION AND PERFORMANCE FOR APPROVAL P/N: E421C-5000G12003/12/15REV.021 of 37 4. Thermal Shock(For Specification 5.4): The following conditions for 10cycles. A. -20± 2...... 1hours B. +60±2...... 1hours (Transit time shall be within 3minutes.) Test Result: (V.S.W.R: 2.0) Frequency2.4 GHz2.45 GHz2. 5 GHz Before Thermal Shock Test1.6411.2181.554 1 After Thermal Shock Test 1.6891.2371.588 Before Thermal Shock Test1.6331.3121.617 2 After Thermal Shock Test 1.7211.3461.632 Before Thermal Shock Test1.5591.3441.727 3 After Thermal Shock Test 1.6021.3681.778 Before T…

Text truncated - open the document above for the full version.

RF Exposure Info

SPECIFICATION FOR APPROVAL CUSTOMER DATE DESCRIPTION CUSTOMER P/N WANSHIH ELECTRONIC CO., LTD. 723 3F 72 WU KONG 6TH RD., WU KU INDUSTRIAL DISTRICT TAIPEI HSIEN, TAIWAN,R.O.C. TEL(02) 22988066 (5 LINE) FAX(02)22981102 920917 Swivel Type1/4λ Monopole Antenna (Gray) Reverse SMA Connector 1 Table of Contents Table of Contents ......... 1 Specification ......... 2 Antenna Drawing ......... 3 Connector Drawing ......... 4 Electrical Properties Return Loss ......... 5 V. S . W. R ......... 6 Radiation Pattern ......... 7-8 Material Data Sheet Coaxial Cable ......... 9-11 Housing ......... 12 Hinge ......... 13 2 SPECIFICATION 1. Description The antenna is a Swivel Type Antenna 2. Customer 3. Model No. WSS002 4. Part No. SHW0001A 5. Standard IEEE 802.11b 11Mbps Wireless LAN 6. Antenna Profile 108 mm length (see Drawing) 7. Color Gray 8. Electrical Characteristics Operating Frequency 2.4~2.5Ghz Antenna Type 1/4λ Dipole Sleeve Polarization Type Linear Type of Radiation Toroidal Peak Gain 2.0 dBi Typical Impedance 50 Ohm nominal V.S.W.R. 2.0:1 Max. 9. Mechanical Characteristics Action Swivel Type Connector SMA Reverse Connector Core N/A 10. Raw Material Coaxial Cable MIL-C-17 RG-178 B/U Housing TPU Hinge Polycarbonate 3 4 5 Electrical Properties Return Loss 6 Electrical Properties V. S . W. R 7 Electrical Properties Radiation Pattern – H Plane 8 Electrical Properties Radiation Pattern – E Plane 9 Coaxial Cable Data Sheet RG-178 SPECIFICATION FOR APPROVAL A30178B001 200 30V RG-178B/U SIZE: 7/0.102 SCCS RECOGNIZED: WONDERFUL HI-TECH CO.,LTD OFFICE72WU KONG 6TH ROAD, WU KU IND. DISTRICT TAIPEI HSIEN,TAIWAN TEL(02)22988033 FAX(02)22988031-2 FAC TO RY17 PEI YU…

Text truncated - open the document above for the full version.

Contact Information

Applicant

willian Chiang Hsieh(R&D Engineer)

[email protected]886-3-461-5000Fax: 886-3-461-4000

Technical Contact

Global EMC Standdard Tech. Corp.Joanna Chen

[email protected]+886 2 2603 5321

No. 3, Pau-Tou-Tsuo Valley · Lin Kou Hsiang, Taipei County · Taiwan

Test Firm

Global EMC Standard Tech. Corp.Tony Tsai

[email protected]886-2-2603-5321Fax: 886-2-2603-5325

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
1	15C	2.41 GHz - 2.46 GHz	86.00 mW

Modular Type

Single Modular Approval

Grant Notes

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user�s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.