PQY-4710874201170Bluetooth Charging Dongle

1 Bluetooth Mini Mouse BTM-5963 2 Introduction The 2.4GHz Bluetooth Wireless Optical Mouse and Bluetooth USB charging adapter can create a flexible, convenient and wireless working environment. The optical mouse with ergonomic design offers high frequency penetration, low interference, and omni-directional signal transmission. Employing reliable 2.4GHz Bluetooth wireless technology, the Bluetooth Optical Mouse can be positioned up to 10 meters away from the PC in all directions, even with objects placed between the mouse and the adapter. For example, a Bluetooth-enabled printer in the radio range can receive documents from the computer wirelessly and print the documents. Bluetooth USB charging Adapter is a 2-in-one multifunctional adapter which acts as a Bluetooth enabler and power charger. It enables your desktop or laptop to connect wirelessly to any other Bluetooth enabled computers and devices and never worry about batteries run out. It allows a working range up to 10 meters (33 feet) with a 723 Kbps data rate transmission, and complies with Bluetooth 1.1 and USB 1.1 specifications. This package is an ideal solution for home and mobile networking needs and provides an easy-to-operate users’ interface connecting wirelessly to any Bluetooth enabled cellular phones, PDAs, printers, computers, keyboards, mice etc. 3 Content Package Contents Overview System Requirements Software Installation Hardware Installation Install Bluetooth USB charging Adapter Install battery for mouse Pairing for mouse Technical Support Specification FCC Safety Statements Regulatory Information Warranty Package Contents o Bluetooth USB Charging Adapter o Bluetooth Mouse o Installation CD o User’s Guide Bluetooth Installation CD contains: o Widcomm v1.4 driver for Bluetooth USB Charging Adapter o BTW User’s Guide 4 Overview Bluetooth is a low-power-consumption wireless networking standard, which uses short radio links to allow electronic devices to communicate with each other without cables. The following services are supported by Bluetooth technology: o Synchronize your Bluetooth PDA with your computer. o Send your business cad to anyone who has a Bluetooth enabled device. o Send or receive files to or from anyone who has a Bluetooth enabled device. o Send an e-mail without being wired to the network. o Dial up to internet on your computer over your Bluetooth cellular phone. o Send a fax from your computer over your Bluetooth cellular phone. o Chat with anyone who has a Bluetooth enable computer. o Play a one-on-one serial game without a cable. Most Bluetooth enabled devices may act as: o A Bluetooth host – can provide one or more services, such as access to the Internet or to other Bluetooth devices. o A Bluetooth client – can use the service provided by Bluetooth servers. o Bluetooth devices can act as both host and client, and do both at the same time. 5 System Requirements o CPU: Intel Pentium III 500MHz or above. o System Memory: 256MB or more. o Hard disk space: at least 50MB. o OS: Windows 98SE/Me/2000/XP o MAC OS 10.1.4 or later o A free USB port, USB 1.1 compliant. o CD-ROM Drive. 6 Software Installation Note: Do not plug your Bluetooth USB Charging Adapter into USB port until you have completed the software installation as the following: 1. Insert the driver CD into a CD-ROM drive. The setup program will start automatically. 2. In case the drive doesn’t support auto-run function, please find “setup.exe” file at the root of driver CD. Double click it to start installation process. (Note: the following pictures will be a little bit different if you are installing on Windows XP) (d01.jpg) 7 3. The license Agreement will appear. Please read and agree with the agreement by checking “I accept the terms in the license agreement” and click “Next”. (d02.jpg) 4. Click “Next” to install the default directory, or click “Change” to install in a different directory. (d03.jpg) 8 5. Click “Install” to start the installation. (d04.jpg) 6. The installation process may take a few minutes. (d05.jpg) 9 7. A notice of Driver Signature from Windows system may appear. Please click “OK” to continue the installation. (d08.jpg) 8. Installation program will ask you to plug in Bluetooth Adapter. Please click “Cancel” to skip it. (d09.jpg) 10 9. Once the installation has completed, click “Finish”. (d06.jpg) 10. You will be asked to restart system. Click “Yes” to restart. (d07.jpg) 11 11. You will see a shortcut on Windows desk and a Bluetooth Logo icon on the task bar after system re-started. (10.jpg) 12 Hardware Installation Plug-in the Bluetooth USB charging adapter 1. Make sure you complete the software installation before you plug in Bluetooth USB charging adapter. 2. Plug the Bluetooth USB charging adapter into a free USB port of PC. System will detect the Adapter and start to install driver automatically. The Bluetooth logo on task bar will change color from red to white. (09.jpg) 3. To enable the Bluetooth USB charging Adapter by double clicking the short cut on the desk or the icon on the task bar. System will initiate a Bluetooth configuration wizard. Follow the on screen procedures to complete configuration setup. Click “next”. (01.jpg) 13 4. Give a name of your computer and select type of your computer. (02.jpg) 5. Click “Next” (03.jpg) 14 6. Choose the services that your computer will offer. Uncheck the items you don’t want to offer. Click “Next”. (05.jpg) 7. Click “Skip” to skip adding other Bluetooth devices on this step. (06.jpg) 15 8. Now, your Adapter is enabled and ready to use. Click “Finish” to complete the setup process. (07.jpg) CONGRATULATIONS! Now your computer is Bluetooth Enabled. 16 Install batteries for Mouse 1. Remove the cap by pressing inward the tenon of battery cap gently. 2. Insert 2 rechargable1.2-V AAA Ni-Mh batteries in proper polarity. 3. To save battery power, always switch off the mouse while traveling or when you’re not using it. The power saving switch locates on the mouse bottom. Charging t…

Text truncated - open the document above for the full version.

BTM-5963 RX Block Diagram

16MHz Bluetooth Mini Mouse Model No: BTM-5963 Battery Optical Sensor Bluetooth Baseband / RF Filter ANT Scrolling wheel Right/Middle/left Keys Flash memory

Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 1 of 1 PHOTOS OF EUT (Model No.: BTM-5963)

Sample of FCC ID Label The device is so small that the 2 parts warning statement does not have to go on the device. It will be really hard to read. We remove the 2 parts statement from the device since we already have it in the manual. FCC ID :PQY-4710874201170

Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 1 of 3 PHOTOS OF EUT (Model No.: BTM-5963) Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 2 of 3 PHOTOS OF EUT (Model No.: BTM-5963) Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan, R.O.C. Photo Page: 3 of 3 PHOTOS OF EUT (Model No.: BTM-5963)

FCC ID: PQY-4710874201170 Operational Description of the equipment This is a Bluetooth Charging Dongle. The detailed circuit functions are described as below: PRODUCT Bluetooth Charging Dongle MODEL NO. BTM-5963 POWER SUPPLY DC 5.0V, 0.2A FREQUENCY BAND 2400~2483.5MHz NUMBER OF CHANNEL 79 CHANNEL SPACING 1MHz RATED RF OUTPUT POWER 12 dBm MODULATION TYPE GFSK MODE OF OPERATION duplex DUTY CYCLE 50% BIT RATE OF TRANSMISSION 723Kbps ANTENNA TYPE PCB antenna

1 2 3 4 56 ABCD 6 5 4 3 2 1 D CBA Title Number Revision Size B Date: 25-May-2004 Sheet of File: C:\My Documents\Design\Dongle_CSR\CLK-107\CLK-107.DDB Drawn By: 12 ANT PIO9 1 PIO10 2 PIO11 3 AIO0 4 AIO1 5 RESET 6 SPI_IO 7 SPI_CSB 8 SPI_MOSI 10 UART_CTS 11 UART_TX 12 UART_RTS 13 UART_RX 14 1V8 15 3V3 16 GND 17 SPI_CLK 9 PCM_OUT 18 PCM_SYN 19 PCM_IN 20 PCM_CLK 21 USB_DP 22 USB_DN 23 PIO7 24 PIO6 25 PIO5 26 PIO4 27 PIO3 28 PIO2 29 PIO1 30 PIO0 31 GND 32 RF 33 GND 34 U1BC02 3V3 D+D- 1234 USB_CON CON4 GND VIN 2 VOUT 3 GND 1 U3 RT9161-33CX R3330R C1 47UF L2 棠紩 L1 棠紩 HID Dongle & charger CLK-107B-03 GND VCC CLK ISOOSI CSB JP2PIN6 3V3 S1 DNF 3V3 C2 47UF REF 1 TIMER 2 MODE 3 GND 4 LED 5 ICON 6 VBT 7 VCC 8 U4AIC1783A Q1STD1766 D6 LL4148 R10100KR12100K R13470K R9100K R11270K R14560R R61R5 R839K C5 4.7UF C6 104 D5LL4148 D4LL4148 BT1 BATTERY R510K R7560R C447UF VCC L3 3N9 C7DNF R11.5K R4100RR210K C3104 3V3 1234 JP14 HEADER 3V3 R15DNF C8104 D3GREEN LED D1BLUE LED 3V3 D2RED LED 1 1 2 2 D7 LGL34-20 D_VCC VIN 2 VOUT 3 GND 1 U5 9161-50

Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan TEST REPORT Reference No.:A04072001 Report No.:FCCA04072001 FCC ID:PQY-4710874201170 Page:2 of 52 Date: Oct. 28, 2004 TABLE OF CONTENTS 1. DOCUMENT POLICY AND TEST STATEMENT...................................................4 1.1 DOCUMENT POLICY.........................................................................................4 1.2 TEST STATEMENT.............................................................................................4 2. DESCRIPTION OF EUT AND TEST MODE.......................................................5 2.1 GENERAL DESCRIPTION OF EUT...................................................................5 2.2 DESCRIPTION OF SUPPORT UNIT..................................................................6 2.3 DESCRIPTION OF TEST MODE........................................................................6 3. DESCRIPTION OF APPLIED STANDARDS.......................................................6 4 TECHNICAL CHARACTERISTICS TEST..............................................................7 4.1 CHANNEL SEPARATION TEST.........................................................................7 4.1.1 LIMIT..................................................................................................................7 4.1.2 TEST EQUIPMENT..........................................................................................7 4.1.3 TEST SET-UP..................................................................................................7 4.1.4 TEST PROCEDURE........................................................................................7 4.1.5 EUT OPERATING CONDITION.......................................................................7 4.1.6 TEST RESULT.................................................................................................8 4.3 20DB BANDWIDTH..........................................................................................11 4.3.1 LIMIT..............................................................................................................11 4.3.2 TEST EQUIPMENT........................................................................................11 4.3.3 TEST SET-UP................................................................................................11 4.3.4 TEST PROCEDURE......................................................................................11 4.3.5 EUT OPERATING CONDITION.....................................................................11 4.3.6 TEST RESULT...............................................................................................12 4.4 QUANTITY OF HOPPING CHANNEL TEST....................................................15 4.4.1 LIMIT................................................................................................................15 4.4.2 TEST EQUIPMENT........................................................................................15 4.4.3 TEST SET-UP................................................................................................15 4.4.4 TEST PROCEDURE......................................................................................15 4.4.5 EUT OPERATING CONDITION.....................................................................15 4.4.6 TEST RESULT...............................................................................................16 4.5 TIME OF OCCUPANCY (DWELL TIME)...........................................................17 4.5.1 LIMIT................................................................................................................17 4.5.2 TEST EQUIPMENT........................................................................................17 4.5.3 TEST SET-UP................................................................................................17 4.5.4 TEST PROCEDURE......................................................................................17 4.5.5 EUT OPERATING CONDITION.....................................................................17 4.5.6 TEST RESULT...............................................................................................18 4.6 PEAK POWER TEST.........................................................................................22 4.6.1 LIMIT................................................................................................................22 4.6.2 TEST EQUIPMENT........................................................................................22 Spectrum Research & Testing Lab., Inc. No. 101-10, Ling 8, Shan-Tong Li, Chung-Li City, Taoyuan, Taiwan TEST REPORT Reference No.:A04072001 Report No.:FCCA04072001 FCC ID:PQY-4710874201170 Page:3 of 52 Date: Oct. 28, 2004 4.6.3 TEST SET-UP................................................................................................23 4.6.4 TEST PROCEDURE......................................................................................23 4.6.5 EUT OPERATING CONDITION.....................................................................23 4.6.6 TEST RESULT...............................................................................................23 4.7 BAND EDGE TEST............................................................................................26 4.7.1 LIMIT................................................................................................................26 4.7.2 TEST EQUIPMENT........................................................................................27 4.7.3 TEST SET-UP................................................................................................28 4.7.4 TEST PROCEDURE......................................................................................29 4.7.5 EUT OPERATING CONDITION.....................................................................29 4.7.6 TEST RESULT...............................................…

Text truncated - open the document above for the full version.

PHOTOS OF TESTING - Radiated test(RX-Link) - Radiated test(RX-Charge) - Radiated test(TX) - Conducted test (Link) - Conducted test (Charge)