PROWCS-232V50Serial to Bluetooth Converter

User’s Manual WCS-232 v5.0 User’s Manual WCS-232 v5.0 User’s Manual WCS-232 v5.0 User’s Manual WCS-232 v5.0 R R A W A N T Y 5 YEAR SystemBase Co., Ltd. warrants that the product(s) shall be free from manufacturing defects in materials and workmanship for a period of five (5) years from the date of delivery provided that the product was properly installed and used. Defects, malfunctions or failures of the warranted product caused by damage resulting from acts of God (such as floods, fire, etc.), environmental and atmospheric disturbances, other external forces such as powerline disturbances, host computer malfunction, plugging the board in under power, or incorrect cabling and damage caused by misuse, abuse and unauthorized alteration or repair are not warranted. The warranty is limited to the r epair and/or replacement, at SystemBase's option, of the defective product during its warranty period. Customer must obtain a Return Material Authorization (RMA) number prior to returning the defective product to SystemBase for service. Customer agrees to insure the product or assume the risk of loss or damage in transit, to prepay shipping charges and to use the original shipping container or equivalent. Contact SystemBase Customer Support at [email protected] for further information. Product replaced shall be warranted for a period of ninety (90) days or the duration of the initial product warranty period, whichever is longer. THE PROVISIONS OF THE WARRANTY ARE IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESSED OR IMPLIED, WRITTEN OR ORAL, AND SYSTEMBASE'S LIABLITY ARISING OUT OF THE MANUFACTURE, SALE OR SUPPLYING OF THE PRODUCT AND ITS USE, WHETHER BASED ON WARRANTY, CONTRACT, NEGLIGENCE, PRODUCT LIABILITY OR OTHER WISE, SHALL NOT EXCEED THE ORIGINAL COST OF THE PRODUCT. IN NO EVENT SHALL SYSTEMBASE BE L IABLE FOR UNINTENDED OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LTMITED TO, LOSS OF PROFITS OR USE DAMAGES ARISING OUT OF THE MANUFACTURE, SALE OR SUPPLYING OF THE PRODUCT. Help Hotline : Technical supports are available to all our customers for assistance in installation and operation. [+82-2-855-0501] e-mail: [email protected] 5-Year Warranty WCS-232 v5.0 16F Daerung Post Tower-1, 212-8, Guro-dong, Seoul, Korea / Tel. 82-2-855-0501 / Fax. 82-2-855-0580 www.sysbas.com / www.solvline.com / [email protected] User’s Manual Version 1.0 RS232 to Bluetooth Converter 1 2 3 4 5 6 1. Preface Thank you for purchasing product by SystemBase. This product has passed thorough quality control and during the 5 year warranty period, the customers can get free repair services from the day the purchase was made. If you have any questions or difficulties with this product please contact our Technical Support at http://www.solv- line.com. 2. Introduction ● This is a converter which changes RS232 signal to Bluetooth signal or vice versa. ● The following is the contents in the package. · WCS-232 v5.0 2EA · 1dB antenna 2EA · User manual · USB power cable 2EA 3. Specification 3.1 Serial Communication Communication InterfaceRS232 Communication SpeedMax. 230.4kbps Communication DistanceMax. 15m ConnectorDB9 Female 3.2 Bluetooth Communication Specification Bluetooth Specification V2.1 + EDR class 1 Frequency 2402 ~ 2480 MHz Wireless method Frequency Hopping Spread Spectrum Maximum Communication Distance 100m 3.3 Hardware Power Supply 5V from USB port on the PC Can be used with 5~12V DC adapter Dimension36.8(W) x 19.0(D) x 74.2(H) Weight35g 4. Structure 4.1 External Form 4.2 Hardware SETUP ACTIVE : Active Mode SETUP ACTIVE : Setup Mode 4.2 Switch Mode - LINK: When the power is supplied, red LED starts blinking. When connected with the target wirelessly, green is on. - TXD: When a data is transmitted LED is on. (When it is in linked status LED is dimmed.) - RXD: When a data is received LED is on. 5. Connector RS232 DB9 Female 6. Installation 6.1 Connect Connect WCS-232 to a serial port on a PC or a communication device and supply power. LINK TXD RXD RS-232 Side (DB9) Female Connector Antenna ACTIVE MODE Mode Switch SETUP MODE WCS-232 can get the power from USB cable connected to the USB port on the PC. When both WCS-232 is powered up, they will be connected using Bluetooth. This is when you can start using the serial port. 6.2 Environment Setting Since WCS-232 is connected to the serial port, serial related settings (baud rate, data bit, parity bit, stop bit, and flow control) and RF related configurations (name of the device, operation mode, target address) are required to be set. Regarding RF connection settings, if WCS-232 is not trying to connect to other WCS-232 but Bluetooth device from other companies or when trying to reset the settings to the factory default, it is required. 6.3 WCS-232 Setup Utility Installation Run WCS-232 Setup Utility. You can download the file from our homepage or find it from the CD included in the product package. When the User Account Control window pops up, click the Yes button. After installing WCS-232 v5.0 Setup Utility, Microsoft .NET Framework version 2.0 and Microsoft Visual C++ 2005 SP1 Redistributable Package will be ready to be installed. Proceed with Microsoft Visual C++ 2005 SP1 Redistributable Package installation. After WCS-232 Setup Utility installation is complete, click WCS-232 v5.0 Setup Utility v5 from the Start button → SystemBase → WCS-232. 6.4 Remove WCS-232 Setup Utility Click WCS-232 Uninstall from Start button → SystemBase → WCS-232 Proceed with uninstallation by clicking on the Remove selection. User’s Manual WCS-232 v5.0 User’s Manual WCS-232 v5.0 User’s Manual WCS-232 v5.0 User’s Manual WCS-232 v5.0 9 7 10 8 11 12 13 14 7. Operation Environment Configuration 7.1 How to configure Dedicated WCS-232 v5.0 configuration utility can be used to modify communication speed, parity, stop bit, device name, and operation mode. ■ Retrieve settings ① Connect WCS-232 to COM port and supply power to the unit. ② Set switch in WCS-232 to Setup Mode. ③ Run WCS-232 v5.0 Setup Utility…

Text truncated - open the document above for the full version.

MCU With Bluetooth Core RF Power Amplifier Filter & Switch RS-232 Tranceiver Bluetooth Power & Regulator + 5 ~ 9 VDC + 3.3 V RS-232 Status LED LINK, TXD, RXD

16F Daerung Post Tower-1 , 212-8, Guro-dong, Seoul, Korea Serial to Bluetooth Converter WCS-232 Ver5.0 2013-07-08 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material. SystemBase Co., Ltd. would like the following documents regarding this submission for FCC ID: PROWCS-232V50 to be kept confidential. 1. Schematics 2. Part List The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, ( Kyu-Yeon, Won / project manager) (SystemBase Co., Ltd. )

16F Daerung Post Tower-1, 212-8, Guro-dong, Seoul, Korea Serial to Bluetooth Converter WCS-232 Ver5.0 Pursuant to 47 CFR Part 0, section 0.459, we herewith submit a request for non- disclosure of the following exhibits, related to this application for FCC ID : PROWCS- 232V50 The contents of the exhibits as listed below under 1-4 may not be disclosed to any other party than company name and must be temporary with held from public inspection under 5 U.S.C552 (b)(4) and must be temporary kept confidential. 1. Internal Photo The short-term confidentiality is scheduled to terminate on 11. 30. 2013. The reason for this request for short-term confidentiality is that the information contained in the exhibits as listed above has been classified as being temporary company confidential (with reference to 47 CFR Part 0, section 0.457(d)). Disclosure of any portion of this information to other parties prior to the date of the actual marketing of the device would cause substantial competitive harm. I, as the applicant, understand and have taken notice of the following. (a) The maximum period for short-term confidentiality is 180 days, counting from the date of issue of the Grant (b) The applicant shall inform the TCB about the date on which the device will be actually marketed. Such a notification must be received by the TCB before the date of actual marketing. The short-term confidentiality will then terminate before or on the date of the actual marketing of the device. (c) If no request from the applicant is received by the TCB for releasing the short- term confidentiality, it will terminate automatically after 180 days, counting from the date of issue of the Grant Your sincerely, (Kyu-Yeon,Won / project manager) (SystemBase Co., Ltd. )

안테나 특성 확인 결과 항 목 결과 공중선의 종류 및 형태 Mini Omni Antenna 공중선의 이득 및 지향특성 1.5 dBi 공중선의 편파특성 선형편파 송신장치와의 접속형태 커넥터형 공중선의 제작자 및 모델명 AUSTONE 이득 측정기관명 AUSTONE :LUHOHVV6LJQDO6ROY &DOLIRUQLD86$ %UDQFK   352'8&7$33529$/6+((7   &86720(5 Κ  &86720(531 Κ 1RQH  0$18)$&785(5Κ   02'(/31Κ   $''5(66Κ 7(/Κ  )$;Κ 5(9,6,21Κ $               0$18)$&785(5 6,*1$785( &86720(5 6,*1$785( $33529('%<Κ  '$7(Κ      :LUHOHVV6LJQDO6ROYHU 70 &DOLIRUQLD86$ %UDQFK  &RQWHQWV   6SHFLILFDWLRQ«««««««««««««««««««««««««««««««   3URGXFW'UDZLQJ«««««««««««««««««««««««««««««   7HVW5HSRUW««««««««««««««««««««««««««««««««   3DFNLQJ'HVFULSWLRQ««««««««««««««««««««««««««««   0DWHULDO3URSHUWLHV«««««««««««««««««««««««««««««   6*65HSRUW««««««««««««««««««««««««««««««                2.4~2.5GHz Mini Omni Antenna, 1.5d 2.4~2.5GHz Mini Omni Antenna, 1.5d Bi Gain, Bi Gain, WiFi WiFi 802.11b/g/n 802.11b/g/n Band, SMA Plug (male) Band, SMA Plug (male) Features & Applications •WiFi 802.11b/g/n band 2400~2500MHz complacent. •High throughput results on indoor AP. •1.5dBi gain value for outdoor/indoor device available. •Suit for Access Point, Router, Wireless XDSL modem, media adapter of extended wireless coverage. •Cover WiFi 2.4GHz proprietary wireless indoor projects. •1x1/2x2/3x3 MIMO technologies enabled. SMA Plug (male)Connector: 10 WMax. Power Input: N/AFront to Back Ratio: 70̓BW/Elevation: 360̓BW/Azimuth: Linear, VerticalPolarization: 50ӨImpedance: 2.0:1 max.VSWR: 1.5 dBi typ.Peak Gain: 2.4~2.5GHzFrequency Range: Electrical Specifications 1 YearWarranty: TPERadome Material: N/AWaterproof: -30к~ +80кTemperature: N/AWind Speed Load: N/AAccessories: Direct mountMounting: BlackColor: 3.5gWeight: ӽ9xL30 mm Dimensions: Mechanical Specifications Made in Taiwan   Page 1/3 Wireless Signal Solver TM          G%L2PQL$QWHQQD   7(675(3257            3URGXFW 'HVFULSWLRQ  G%L2PQL$QWHQQDIRUa0+] 5HYLVLRQ  9 'DWH   5HSRUW E\ $OH[       Page 2/3 Wireless Signal Solver TM 96:50($685(0(175(68/7     5$',$7,210($685(0(1725,(17$7,21       = < ; ш ш  Page 3/3 Wireless Signal Solver TM 5$',$7,213$77(510($685(0(175(68/7  $=,087+ ;<3ODQH  (/(9$7,21 ;=3ODQH   Name Quantity Carton 2000 pcs. 3.5g/pcs ij 9*L30mm APPROVEDCHECKEDDRAWING Hank 2011/10/26 DATE N.W. G.W. Dimension Total Q'ty Weight 2000pcs. 7.4KG7.9KG Customer DESCRIPTION A New issue REV Customer P/N A 3DFNLQJ'HVFULSWLRQ Spec 290x230x330 mm Date Version Packing Description 2011/10/26 Chipsen C/NO: 'HVFULSWLRQ 0P; JUFN!OP;! RUZ;!!!!!!!!QDT OX;!!!!!!!!!LHT HX;!!!!!!!!!LHT 2000 PCSKGSKGS ITEM NO.:Q'TY.:N.W.:G.W.: P 80pcs/tray 80pcsx25trays=2000pcs 

WCS-232 V1. 0 Operating Descriptions 1. Feature WCS-232 is a Serial-to-Bluetooth Converter which allows Bluetooth communication in Serial (RS-232) environment with providing coordinator, router, and end device features. 2. Specification RF Section Standard Bluetooth 2.1 +EDR Modulation GFSK(Gaussian frequency-shift keying) Antenna 1.5 dB Stub Antenna provided Serial Section Interface RS-232 Signal used TXD, RXD, CTS, RTS, DTR, DSR Speed Max. 230.4kbps Hardware & Operating Environment Operation Voltage +5 VDC Power Consumption Max. 0.5W LED Information Link, TXD, RXD Operation Temperature 0°C ~ +55°C Operation Humidity 5 ~ 95%, non-condensing 3. WCS-232 Operation Environment Configuration Dedicated WCS-232 v5.0 configuration utility can be used to modify communication speed, parity, stop bit, device name, and operation mode. ■ Retrieve settings 1. Connect WCS-232 to COM port and supply power to the unit 2. Set switch in WCS-232 to Setup Mode. 3. Run WCS-232 v5.0 Setup Utility 4. From the utility, click Connection then COM Port at the top of the menu to select the port to connect. 5. When successfully completed, “Read from flash is success” message will appear. ■ Save settings 1. Click Apply button to save the settings in the device memory. 2. After it is saved, “Write to flash is success” message will appear. 3. Click on the OK button to save the settings in the device memory and close the windows. ■ Serial Port Set serial communication configuration for SPP (Serial Port Profile). ■ Pairing Role Select Master/Slave mode ■ Bluetooth Address Current Bluetooth address can be checked. The target Bluetooth address can be checked and set. ■ Pin Number When connecting to the Bluetooth device, this pin is required. Up to ASCII 16 characters can be set for a pin number. ■ Connection Mode WCS-232 v5.0 supports “1:1 connection” and “connection waiting” modes. In 1:1 connection mode, connection is established when the address of the Bluetooth device is entered manually. In connection waiting mode, when target device is not specified, it will look for new devices automatically. ■ Device Name A device name can be given here with up to 16 ASCII characters. ■ Connection Timeout Set a given period of time until the Bluetooth device search and connects.

IST Co., Ltd EMC LABORATORY TEST REPORT NO. : 13-IST-0511 1 of 32 CERTIFICATION TEST REPORT FCC CFR47 Part 15 Subpart C Test Report File No. 13-IST-0511 ■ Basic □ Alternate Date of Receipt May 30, 2013 Begin of test date June 03, 2013 Date of Issue July 05, 2013 End of test date June 07, 2013 Kind of Product Serial to Bluetooth Converter Model(s) WCS-232 Ver5.0 FCC ID PROWCS-232V50 Applicant SYSTEMBASE CO.,LTD. Address 16F, Daerung Post Tower-1, 212-8, Guro-dong, Seoul, Korea Manufacturer SYSTEMBASE CO.,LTD. Address 16F, Daerung Post Tower-1, 212-8, Guro-dong, Seoul, Korea Test Result ■ Positive □ Negative Tested By Reviewed By B.O. KO. S.J.CHO Comment(s) - Investigations requested : Measurement to the relevant clauses of FCC rules and regulations Part 15 Subpart C. - The test report is consists of 32 pages. - The test result only responds to the tested sample. - It is not allowed to copy this report even partly without the allowance of IST Co., Ltd. - This equipment as for has been shown to be capable of continued compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4 I assume full responsibility for accuracy and completeness of these data. IST Co., Ltd EMC LABORATORY TEST REPORT NO. : 13-IST-0511 2 of 32 TABLE OF CONTENTS Table of contents 2 Information of test laboratory, Product information 3 Measurement Uncertainty, Summary 4 Descriptions of Test 5 - Conducted Emission * note : Conducted Emission refer EMC report. - - Radiated Emission 7~12 - Radiated Emission, 9KHz to 30MHz(Magnetic Field Test) 7 - Peak power output 13~15 - Conducted Spurious Emission & Band edge 16~20 - Frequency Separation & Occupied Bandwidth/20dB Bandwidth 21~27 - Number of hopping frequency 28~29 - Time of occupancy(Dwell time) 30~31 - Antenna requirements 32 Note: IST Co., Ltd EMC LABORATORY TEST REPORT NO. : 13-IST-0511 3 of 32 INFORMATIONS OF TEST LABORATORY EMC LABORATORY of IST Co., Ltd. 400-19, Singal-dong, Giheung-gu, Yongin-si, Gyeonggi-Do, 446-599, Korea TEL: +82 31 326 6700 FAX: +82 31 326 6797 PRODUCT INFORMATION WCS-232 Serial Communication Bluetooth Communication Hard Ware Test Mode : Mode 1: Transmit(DH5) Mode 2: Transmit(3DH5) 1. DH5 is for GFSK modulation, and 3DH5 is for 8DPSK 2. Regards to the frequency band operation; the highest that was included the lowest, middle and highest frequency of channel were selected to perform the test, and then shown on this report. - Please refer to user’s manual. VCCI Registration No. : 1739 FCC Registration No. : 400603 KCC Registration No. : KR0018 KOLAS Registration No. : KT118 Power Supply 5V from USB port on the PC Dimension 36.8(W) x 19.0(D) x 74.2(H) Weight 35g IST Co., Ltd EMC LABORATORY TEST REPORT NO. : 13-IST-0511 4 of 32 Measurement Uncertainty Conducted Emissions U = 2.98 [dB] (Confidence level approximately 95 %, k = 2) Radiated Emissions (Antenna - Horizontal) U = 3.83 [dB] (Confidence level approximately 95 %, k = 2 ) Radiated Emissions (Antenna - Verical) U = 4.50 [dB] (Confidence level approximately 95 %, k = 2 ) SUMMARY Bluetooth Mode(2402MHz ~2480MHz) Applied Standard : FCC CRF Part 15 Subpart C Description of Test FCC Rule Parts Results Carrier Frequency Separation 15.247(a)(1) Compliant 20 dB Bandwidth 15.247(a)(1)(ii) or (iii) Compliant Time of Occupancy 15.247(a)(1)(ii) or (iii) Compliant Number of Hopping Frequencies 15.247(a)(1)(ii) or (iii) Compliant Conducted Maximum Peak Output Power 15.247(b)(1) Compliant Spurious RF Conducted Emission 15.247(d) Compliant Spurious Radiated Emission 15.247(d), 15.209 Compliant Receiver Spurious Emission Compliant Out-of- Band Emission 15.247(d) Compliant Occupied Bandwidth Compliant IST Co., Ltd EMC LABORATORY TEST REPORT NO. : 13-IST-0511 5 of 32 Descriptions of Test Radiated Emissions: The measurement was performed over the frequency range of 30MHz to 1GHz using antenna as the input transducer to a Spectrum analyzer or a Field Intensity Meter. The measurement was made with the detector set for "quasi-peak" within a bandwidth of 120kHz. Procedure of Test Preliminary measurements were made at 3 meter using bi-log antennas, and spectrum analyzer to determine the frequency producing the max. emission in anechoic chamber. Appropriate precaution was taken to ensure that all emission from the EUT were maximized and investigated. The system configuration, mode of operation, turn-table azimuth and height with respect to the antenna were noted for each frequency found. The spectrum was scanned from 30MHz to 1000MHz using bi-log antenna. Above 1GHz, linearly polarized double ridge horn antennas were used. Final measurements were made at open site with 3- meters test distance using bi-log antenna or horn antenna. The OATS have been verified in regular for its normalized site attenuation. The test equipment was placed on a wooden table. Sufficient time for the EUT, peripheral equipment, and test equipment was allowed in order for them to warm up to their normal operating condition. Each frequency found during pre-scan measurements was re-examined by manual. The detector function was set to CISPR quasi-peak mode and the bandwidth of the receiver was set to 120kHz or 1MHz depending on the frequency of type of signal. The EUT, peripheral equipment and interconnecting cables were re-configured to the set-up producing the max. emission for the frequency and were placed on top of a 0.8-meter high nonmetallic 1 x 1.5 meter table. The EUT, peripheral equipment, and interconnecting cables were re-arranged and manipulated to maximize each emission. The turntable containing the system was rotated; the antenna height was varied 1 to 4 meters and stopped at the azimuth or height producing the maximum emission. Each emission was maximized by: varying the mode of operation to the EUT and/or peripheral equipment and changing the polarity of the antenna, whichever determined the worst-case emission.(The ban…

Text truncated - open the document above for the full version.