PT5I-PRONTOInfotainment Remote Control w/Internet Browser

1 FCC Compliancy 2 What Does the iPronto Box Contain? 3 About the iPronto Documentation 4 About the iPronto 5 Installing the Wireless LAN Adapter 8 Installing and Recharging the Battery 10 Installing 10 Recharging 13 Getting the iPronto Up and Running 14 Setting up Your iPronto 15 Setting up Your Network 20 Using the iPronto 27 The Touch Screen 27 The Status Display 27 The iPronto’s External Controls 28 The Ports 29 Navigating the iPronto 30 The Keyboard 33 The Remote Control 35 How Does the iPronto RC Work? 36 Learning IR Codes 38 Using iProntoEdit 41 The Browser 43 Setting the Home Page 44 Entering a URL 45 The Electronic Program Guide 46 Registration 49 Troubleshooting 54 Index 58 Table of Contents iPronto.qxd 06-08-2002 08:45 Pagina 1 iPronto User Guide 2 FCC Compliancy This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 ofthe FCC rule. These limits are designed to provide reasonable protection against harmful interference in residentialinstallations. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If the equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a different circuit from the receiver.  Consult the dealer or an experienced radio/TV technician for help. iPronto.qxd 06-08-2002 08:45 Pagina 2 3 What Does the iPronto Box Contain? The iPronto box contains the following items: Warranty Battery iPronto iPronto User GuideWireless LAN AdapterAC power adapterwith cable iPronto.qxd 06-08-2002 08:45 Pagina 3 iPronto User Guide 4 The iPronto documentation consists of two parts: This iPronto User Guide . This guide is meant to help you set up and start using the iPronto.  The iPronto Online Help . The iPronto Online Help contains complete information on how to use the iPronto remote control and its extra features. You can find the iPronto Online Help onhttp://www .pr onto.philips.com/pr oducts/ipr onto/help/ About the iPronto Documentation iPronto.qxd 06-08-2002 08:45 Pagina 4 5 About the iPronto Wirelessly connected to the Internet, the iPronto is a must-have for your home entertainment experience. With itsdashboard you can easily access all iPronto’s applications. The dashboard offers access to three basic applications: the remote control, the Electronic Program Guide and the Browser, however, you can add new applications to thedashboard.With iPronto’s universal remote control you can operate almost all your devices, as long as they understand IR (infrared) signals. And because of its intuitive interface, iPronto is easy to use for everybody.But iPronto is not only a remote control: it also has an Electronic Program Guide . Without any effort you always have an up-to-date and customizable Program Guide for your favorite channels. What makes this Electronic ProgramGuide so unique is its direct interaction with the iPronto’s remote control. No more wading through pages of programguides. Get the information you want fast and start watching your programs immediately by tapping one single button. You arewatching TV and would like to see sports shows? Using the EPG, you only need one button press to surf through thechannels that are broadcasting sports at this particular moment.The iPronto is also provided with easy Internet browsing functionality . With the browser application it is now possible to connect to the Internet while you sit back and relax in front of your TV. iPronto.qxd 06-08-2002 08:45 Pagina 5 iPronto User Guide 6 About the iProntoThe iPronto consists of several parts: microphone stylus power button speaker scroll wheel speaker RC buttons status display iPronto.qxd 06-08-2002 08:45 Pagina 6 7 About the iPronto This User Guide is meant to help you set up and start using your iPronto. For detailed information on using the variousiPronto applications please refer to the iPronto Online Help. If you follow the flow of the chapters in this guide, you willhave your iPronto up and running in no time. You find information about: Installing the Wireless LAN Adapter on page 8;  Installing and Recharging the Battery on page 10;  Getting the iPronto Up and Running on page 14;  Using the iPronto on page 27;  Using the iPronto’s basic applications: The Remote Control on page 35, The Browser on page 43 and The Electronic Program Guide on page 46;  Troubleshooting on page 54. IR learning eye and sending eye cover of the wireless LAN adapter reset button cover of the battery pack stand iPronto.qxd 06-08-2002 08:45 Pagina 7 iPronto User Guide 8 Installing the Wireless LAN AdapterIn a wireless network, the Wireless Access Point (WAP) is the last point that is connected to your network with wires.To communicate with your iPronto, the WAP sends out RF (radio frequency) signals, which spread in all directions. TheiPronto’s Wireless LAN Adapter (also called PCMCIA card) receives these RF signals and sends RF signals back to theWAP.The first thing you do when you take your iPronto out of the box, is installing this Wireless LAN Adapter. In thefollowing illustrations you see how the installation works: 1 Open the Wireless LAN Adapter cover by pushing in the grips and sliding off the cover in the direction indicated below (figure 1). 2 Insert the Wireless LAN Adapter in the socket, as indicated below (figure 2). Figure 1 Figure 2 iPronto.qxd 06-08-2002 08:45 Pagina 8 9 Installing the Wireless LAN Adapter 3 Put the Wireless LAN Adapter in the correct position and close th…

Text truncated - open the document above for the full version.

Release Engineer/ Quality Assurance 24/10/2002

CONFIDENTIALITY REQUEST October 24, 2002 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Att: Richard Fabina Chief, Equipment Authorization Branch Re: Certification application for FCC ID: PT5I-PRONTO Gentlemen: Pursuant to Sections 0.457 and 0.459 of the FCC Rules, Philips Industrial Activity request post grant confidentiality for the following attachments filed to support the pending certification request for the referenced FCC ID. This equipment contains a previously certified PCMCIA RF transmitter card designed according to the IEEE 802.11b standard under FCC ID:PUBWCM1003. 1. Circuit diagrams submitted as Equipment Authorization electronic filing attachment: "Schematics". 2. Block diagram submitted as Equipment Authorization electronic filing attachment: "Block Diagram". 3. Technical description submitted as Equipment Authorization electronic filing attachment: "Operational Description". Specifically, these exhibits contain information relating to circuit function and complexity that could be of benefit to competitors. The material contains trade secrets and confidential information that Phillips Industrial Activities does not customarily release to the public and which is otherwise not generally available to the public. Please contact the undersigned by telephone at 410-531-3439, by fax at 410-531-0807, by email at [email protected], or by correspondence at the address below if there are any further questions or additional information needed concerning this filing. Regards, (signed) Phillip Inglis, TRP Inc. 14085 Howard Rd. Dayton, MD. 21036

Philips Technology Campus Leuven P1/3 Memo ♦ To: TO WHOM IT MAY CONCERN Copy: From: Rein Hintzen Philips Technology Campus Leuven Tel: +32 16 394 BU Remote Control Systems Fax: +32 16 39 Interleuvenlaan 74 - 82 3001 Leuven E-mail: [email protected] Ref: Date: 2002-09-23 Subject: DECLARATION OF USEMODELS FOR iPronto The iPronto is a wireless home control touch screen panel , connected to the internet via 80211b WiFi card. The device is meant to incorporate control, navigation & infotainment in one home control panel. General use scenario of the iPronto: (Coffee) table top use: 70% Philips Technology Campus Leuven Memo Handheld use ( one hand holding, battery lid supported on lap, another hand operating): 30% ♦ Viewing angle of LCD limits usage to the 2 above cases, Device needs be held up under 30- 45 degrees for normal usage. Use modalities of the iPronto: P2/3 Philips Technology Campus Leuven Memo Control functionality: high frequency (several times/hr), short intervals (10-15 seconds for control functionality) Navigation functionality: Moderate frequency ( eg. 5 min/ hr while consumer is watching TV, listening audio etc....) Infotainment ( used of the browser on daily information eg News, Weather, Traffic etc..) 2x day 20 min. Signed in Leuven on 09/23/2002 by: Rein Hintzen Product manager iPronto Philips RCS Interleuvenlaan 74-76 3001 Leuven Belgium P3/3

Top View Bottom View

FCC ID Label and Location Bottom of unit FCC ID:PT5I-PRONTO This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

PCMCIA Card Cover with Shield installed.

Technical construction file Page 23 of 36 DRAFT . European Communications Consultancy Team Top View Bottom View

PCTEST ENGINEERING LABORATORY, INC. 6660 – B Dobbin Road • Columbia, MD 21045 • USA Telephone 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com (email: [email protected]) CERTIFICATE OF COMPLIANCE (SAR EVALUATION) PCTEST SAR TEST REPORT FCC CERTIFICATION Reviewed by: Quality Manager SAR Filename: SAR.221007523.PT5 Test Dates: Oct 24, 2002 EUT Type: Infotainment Remote Control /w Internet Browser FCC ID: PT5I-PRONTO Page 1 of 21 © 2002 PCTEST Engineering Laboratory, Inc. APPLICANT NAME & ADDRESS: DATE & LOCATION OF TESTING: PHILIPS Industrial Activities Louvain Dates of Tests: Oct 24, 2002 Interleuvenlaan 74-82 Test Report S/N: SAR.221007523.PT5 Leuven, Belgium 3001 Test Site: PCTEST Lab, Columbia MD Attn: Gert Heysse FCC ID: PT5I-PRONTO APPLICANT: PHILIPS Industrial Activities Louvain EUT Type: Infotainment Remote Control w/ Internet Browser Tx Frequency: 2412 – 2472 MHz (DSSS) Rx Frequency: 2412 – 2472 MHz (DSSS) Max. RF Output Power: 0.088W Conducted Max. SAR Measurement: 1.19 W/kg over 1 gm (Body) Trade Name/Model(s): PHILIPS I-PRONTO FCC Classification: Part 15 Spread Spectrum Transmitter (DSS) FCC Rule Part(s): §2.1093; ET Docket 96.326 Application Type: Certification Test Device Serial No.: Identical prototype This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and has been tested in accordance with the measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001) and IEEE Std. 1528-200X (Draft 6.4, July 2001). I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST certifies that no party to this application has been denied the FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. SAR.22040424182.ACJ PCTEST SAR TEST REPORT FCC CERTIFICATION Reviewed by: Quality Manager SAR Filename: SAR.221007523.PT5 Test Dates: Oct 24, 2002 EUT Type: Infotainment Remote Control /w Internet Browser FCC ID: PT5I-PRONTO Page 2 of 21 © 2002 PCTEST Engineering Laboratory, Inc. 1. INTRODUCTION............................................................................................3 SAR DEFINITION............................................................................................3 2. SAR MEASUREMENT SETUP............................................................................4 Robotic System................................................................................................4 System Hardware............................................................................................4 System Electronics...........................................................................................4 3. DASY3 E-FIELD PROBE SYSTEM.......................................................................5 Probe Measurement System..............................................................................5 Probe Specifications.........................................................................................5 4. Probe Calibration Process.................................................................................6 Dosimetric Assessment Procedure.....................................................................6 Free Space Assessment.....................................................................................6 Temperature Assessment..................................................................................6 5. PHANTOM & EQUIVALENT TISSUES...............................................................7 SAM Phantom.................................................................................................7 Brain & Muscle Simulating Mixture Characterization...........................................7 Device Holder.................................................................................................7 6. TEST SYSTEM SPECIFICATIONS........................................................................8 Automated Test System Specifications................................................................8 7. DOSIMETRIC ASSESSMENT & PHANTOM SPECS..............................................9 Measurement Procedure...................................................................................9 Specific Anthropomorphic Mannequin (SAM) Specifications................................9 8. DEFINITION OF REFERENCE POINTS.............................................................10 EAR Reference Point......................................................................................10 Handset Reference Points...............................................................................10 9. TEST CONFIGURATION POSITIONS..............................................................11 Body Holster /Belt Clip Configurations.............................................................11 10. ANSI/IEEE C95.1 - 1992 RF EXPOSURE LIMITS................................................12 Uncontrolled Environment.............................................................................12 Controlled Environment.................................................................................12 11. MEASUREMENT UNCERTAINTIES..................................................................13 12. SYSTEM VERIFICATION.................................................................................14 Tissue Verification.........................................................................................14 Test System Verification.................................................................................14 13. SAR TEST DATA SUMMARY.....................................................…

Text truncated - open the document above for the full version.

SAR Data Report 02102401 Start : 24-Oct-02 10:19:07 am End : 24-Oct-02 10:25:05 am Code Version : 4.08 Robot Version: 4.08 Product Data: Type : Dipole Frequency : 2450 MHz Transmit Pwr : 0.250 W Antenna Type : Dipole Antenna Posn. : Validation Measurement Data: Phantom Name : SAM-FLAT Phantom Type : Uniphantom Tissue Type : Brain Tissue Dielectric : 39.450 Tissue Conductivity : 1.780 Tissue Density : 1.000 Robot Name : CRS Probe Data: Probe Name : PCT25 Probe Type : E Fld Triangle Frequency : 2450 MHz Tissue Type : Brain Calibrated Dielectric : 37.100 Calibrated Conductivity : 1.840 Calibrated Density : 1.000 Probe Offset : 2.400 mm Conversion Factor : 16.400 Probe Sensitivity : 0.753 0.726 0.683 mV/(mW/cm^2) Amplifier Gains : 20.00 20.00 20.00 Sample: Rate: 6000 Samples/Sec Count: 100 Samples NIDAQ Gain: 5 Comments: 2450 MHz Validation CF=1; Amb. Temp= 22.2 'C; Liq. Temp=22.1 'C Area Scan - Max Peak SAR Value at x=2.0 y=3.0 = 11.47 W/kg Zoom Scan - Max Peak SAR Value at x=3.0 y=1.0 z=0.0 = 25.43 W/kg Max 1g SAR at x=4.0 y=3.0 z=0.0 = 13.06 W/kg Max 10g SAR at x=4.0 y=2.0 z=0.0 = 6.01 W/kg Validation Results at 0.25 W: Peak Nominal = 26.1, Error: -2.40 % 1g Nominal = 13.1, Error: -0.27 % 10g Nominal = 6.0, Error: 0.09 % 0 2 4 6 8 10 12 14 16 18 20 22 24 26 SAR (mW/g) 0102030 Z Distance (mm) SAR - Z Axis at Hotspot x:3.0 y:1.0 1g SAR Values 13.06 12.18 11.30 10.41 9.53 8.65 7.76 6.88 6.00 5.11 4.23 SAR Data Report 02102408 Start : 24-Oct-02 11:08:42 am End : 24-Oct-02 11:15:10 am Code Version : 4.08 Robot Version: 4.08 Product Data: Type : PHILIPS Model Number : i-Pronto Frequency : 2412 MHz Transmit Pwr : 0.088 W Antenna Type : Helical Antenna Posn. : Internal Measurement Data: Phantom Name : SAM FLAT2 Phantom Type : Uniphantom Tissue Type : Muscle Tissue Dielectric : 52.600 Tissue Conductivity : 1.940 Tissue Density : 1.000 Robot Name : CRS Probe Data: Probe Name : PCT25 Probe Type : E Fld Triangle Frequency : 2450 MHz Tissue Type : Muscle Calibrated Dielectric : 49.200 Calibrated Conductivity : 1.950 Calibrated Density : 1.000 Probe Offset : 2.400 mm Conversion Factor : 16.500 Probe Sensitivity : 0.753 0.726 0.683 mV/(mW/cm^2) Amplifier Gains : 20.00 20.00 20.00 Sample: Rate: 6000 Samples/Sec Count: 1000 Samples NIDAQ Gain: 5 Comments: DSSS Mode CH 01 CF=1; Amb. Temp= 22.1 'C; Liq. Temp=22.0 'C Area Scan - Max Peak SAR Value at x=-16.0 y=24.0 = 0.82 W/kg Zoom Scan - Max Peak SAR Value at x=-16.0 y=17.0 z=0.0 = 2.92 W/kg Max 1g SAR at x=-15.0 y=20.0 z=0.0 = 1.19 W/kg Max 10g SAR at x=-16.0 y=22.0 z=0.0 = 0.51 W/kg 0.0 1.0 2.0 3.0 SAR (mW/g) 0102030 Z Distance (mm) SAR - Z Axis at Hotspot x:-16.0 y:17.0 1g SAR Values 1.185 1.090 0.994 0.899 0.804 0.708 0.613 0.517 0.422 0.327 0.231 SAR Data Report 02102406 Start : 24-Oct-02 10:47:25 am End : 24-Oct-02 10:53:56 am Code Version : 4.08 Robot Version: 4.08 Product Data: Type : PHILIPS Model Number : i-Pronto Frequency : 2442 MHz Transmit Pwr : 0.088 W Antenna Type : Helical Antenna Posn. : Internal Measurement Data: Phantom Name : SAM FLAT2 Phantom Type : Uniphantom Tissue Type : Muscle Tissue Dielectric : 52.600 Tissue Conductivity : 1.940 Tissue Density : 1.000 Robot Name : CRS Probe Data: Probe Name : PCT25 Probe Type : E Fld Triangle Frequency : 2450 MHz Tissue Type : Muscle Calibrated Dielectric : 49.200 Calibrated Conductivity : 1.950 Calibrated Density : 1.000 Probe Offset : 2.400 mm Conversion Factor : 16.500 Probe Sensitivity : 0.753 0.726 0.683 mV/(mW/cm^2) Amplifier Gains : 20.00 20.00 20.00 Sample: Rate: 6000 Samples/Sec Count: 1000 Samples NIDAQ Gain: 5 Comments: DSSS Mode CH 07 CF=1; Amb. Temp= 22.1 'C; Liq. Temp=22.0 'C Area Scan - Max Peak SAR Value at x=-6.0 y=17.0 = 0.77 W/kg Zoom Scan - Max Peak SAR Value at x=-6.0 y=17.0 z=0.0 = 2.37 W/kg Max 1g SAR at x=-5.0 y=16.0 z=0.0 = 1.03 W/kg Max 10g SAR at x=-5.0 y=16.0 z=0.0 = 0.43 W/kg 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 SAR (mW/g) 0102030 Z Distance (mm) SAR - Z Axis at Hotspot x:-6.0 y:17.0 1g SAR Values 1.033 0.952 0.870 0.788 0.707 0.625 0.544 0.462 0.380 0.299 0.217 SAR Data Report 02102410 Start : 24-Oct-02 11:43:02 am End : 24-Oct-02 11:49:34 am Code Version : 4.08 Robot Version: 4.08 Product Data: Type : PHILIPS Model Number : i-- Pronto Frequency : 2472 MHz Transmit Pwr : 0.088 W Antenna Type : Helical Antenna Posn. : Internal Measurement Data: Phantom Name : SAM FLAT2 Phantom Type : Uniphantom Tissue Type : Muscle Tissue Dielectric : 52.600 Tissue Conductivity : 1.940 Tissue Density : 1.000 Robot Name : CRS Probe Data: Probe Name : PCT25 Probe Type : E Fld Triangle Frequency : 2450 MHz Tissue Type : Muscle Calibrated Dielectric : 49.200 Calibrated Conductivity : 1.950 Calibrated Density : 1.000 Probe Offset : 2.400 mm Conversion Factor : 16.500 Probe Sensitivity : 0.753 0.726 0.683 mV/(mW/cm^2) Amplifier Gains : 20.00 20.00 20.00 Sample: Rate: 6000 Samples/Sec Count: 1000 Samples NIDAQ Gain: 5 Comments: DSSS Mode CH 13 CF=1; Amb. Temp= 22.1 'C; Liq. Temp=22.0 'C Area Scan - Max Peak SAR Value at x=-10.0 y=20.0 = 0.78 W/kg Zoom Scan - Max Peak SAR Value at x=-10.0 y=25.0 z=0.0 = 2.11 W/kg Max 1g SAR at x=-10.0 y=21.0 z=0.0 = 0.90 W/kg Max 10g SAR at x=-11.0 y=20.0 z=0.0 = 0.38 W/kg 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 SAR (mW/g) 0102030 Z Distance (mm) SAR - Z Axis at Hotspot x:-10.0 y:25.0 1g SAR Values 0.902 0.831 0.760 0.689 0.618 0.547 0.476 0.404 0.333 0.262 0.191

© 2002 PCTEST Lab PHILIPS FCC ID: PT5I-PRONTO Infotainment Remote Control w/ Internet Browser © 2002 PCTEST Lab PHILIPS FCC ID: PT5I-PRONTO Infotainment Remote Control w/ Internet Browser © 2002 PCTEST Lab PHILIPS FCC ID: PT5I-PRONTO Infotainment Remote Control w/ Internet Browser

CETECOM ICT Services GmbH Radio Satellite Communication Untertürkheimer Straße 6-10 . D-66117 SaarbrückenTelefon: +49 (0)681 598-9100Telefax: -9075 RSC14issue test report consist of 54 PagesPage 1 (54) TTI-P-G 166/98-30 Accredited Bluetooth™ Test Facility (BQTF) Test report no.: 2_2592-5-A/01 FCC Part 15.247 / CANADA RSS-210 IEEE802.11b PC card WLP1100 (E020EB01) CETECOM – ICT Services GmbH Untertürkheimerstr. 6-10 66117 Saarbrücken, Germany Telephone: + 49 (0) 681 / 598-0 Fax: + 49 (0) 681 / 9075 BLUETOOTH is a trademark owned by Bluetooth SIG, Inc. and licensed to CETECOM CETECOM ICT Services GmbH Test report nr.:2_2592-5-A/01Issue date:19.09.01Page 2 (54) Table of Contents 1 General information 1.1 Notes 1.2 Testing laboratory 1.3 Details of applicant 1.4 Application details 1.5 Test item 1.6 Test standards 2 Technical test 2.1 Summary of test results 2.2 Test report 1 General information 1.1 Notes The test results of this test report relate exclusively to the test item specified in 1.5. The CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the CETECOM ICT Services GmbH. 1.2Testing laboratory CETECOM ICT Services GmbH Untertürkheimer Straße 6 - 10 66117 Saarbrücken Germany Telefone: + 49 681 598 - 9100 Telefax : + 49 681 598 - 9075 E-mail : [email protected] Internet : www.cetecom.de Accredited testing laboratory DAR-registration number : TTI-P-G 166/98-30 Accredited Bluetooth™ Test Facility (BQTF) BLUETOOTH is a trademark owned by Bluetooth SIG, Inc. and licensed to CETECOM CETECOM ICT Services GmbH Test report nr.:2_2592-5-A/01Issue date:19.09.01Page 3 (54) 1.3Details of applicant Name : Philips Components Street : 620A Lorong 1, TP3 Level 5 City : Toa Payoh 319762 Country : Singapore Telephone : +65 350 2766 Telefax : +65 252 6201 Contact : Mr M. Guruprasad Telephone : +65 350 2766 1.4Application details Date of receipt of application : 02.08.01 Date of receipt of test item : 18.09.01 Date of test : 18.09.01 1.5Test item Type of equipment : DSSS RLAN Type designation: IEEE802.11b PC card /WLP1100 (E020EB01) Manufacturer: See applicant Street: City: Country: Serial number: See photographs Additional informations: : Frequency: 2400 – 2483.5 MHz Type of modulation: 22M0P7D (DSSS) (20 dB Bandwidth) Number of channels : 13 Antenna: integral antenna / print antenna Power supply: 3,3 V DC from PC Output power: EIRP: 89.1mW Type of equipment: Temperature range : -10°C - +60°C 1.6Test standards: FCC Part 15 §15.247 CANADA RSS-210 CETECOM ICT Services GmbH Test report nr.:2_2592-5-A/01Issue date:19.09.01Page 4 (54) 2 Technical test 2.1Summary of test results The radiated measurements were performed vertical andhorizontal over the whole frequency range.We start at 1 m high with vertical receiving antenna and rotate the dish continuously. During rotation we use the antenna lift system to vary the high from 1 to 4 m. So we find maximum radiation output. At this points we do manual remeasurements. After this we do the same measurements in horizontal position of the receiving antenna. This (horizontal and vertical) is made for all the three planes of the test sample. We use the maximum received results. The detector function and selection of bandwidth are according ANSI C63.2-1996 item 8.2.1 and ANSI C63.4-1992 Item 4.2. Antennas are conform with ANSI C63.2-1996 item 15. 150 kHz - 30 MHz: Quasi Peak measurement, 9kHz Bandwidth, passive loop antenna. 30 MHz - 200 MHz: Quasi Peak measurement, 120KHz Bandwidth, biconical antenna 200MHz - 1GHz: Quasi Peak measurement, 120KHz Bandwidth, log periodic antenna 1GHz: Average, RBW 1MHz, VBW 10 MHz, waveguide horn All measurement settings are according to FCC 15.35, 15.205, 15.209, 15.247 and the „Measurement guidelines for DSSS systems“. The product fullfills also the requirements for CANACA RSS-210 No deviations from the technical specification(s) were ascertained in the course of the tests performed. Final verdict : PASS Technical responsibility for area of testing : 19.09.2001RSC 8411 Berg M. DateSectionNameSignature Technical responsibility for area of testing : 19.09.2001RSC8412Hausknecht D. DateSectionNameSignature CETECOM ICT Services GmbH Test report nr.:2_2592-5-A/01Issue date:19.09.01Page 5 (54) 2.2Testreport TEST REPORT Testreport no. : 2_2592-5-A/01 CETECOM ICT Services GmbH Test report nr.:2_2592-5-A/01Issue date:19.09.01Page 6 (54) TEST REPORT REFERENCE LIST OF MEASUREMENTS ParagraphPARAMETER TO BE MEASUREDPAGE Transmitter parameters § 15.247 (a)(2) Spectrum Bandwitdh of a DSSS System 7 § 15.247 (b)(1) Maximum peak output power11 § 15.247 (c)(1) Emission limitations 16 § 15.247 (c)Band edge compliance33 § 15.247 (d)Power Spectral Density36 § 15.247 (e)Processing Gain of DSSS System40 Receiver parameters § 15.209Spurious radiations - Radiated41 Test equipment listing47 Photographs of the equipment49 CETECOM ICT Services GmbH Test report nr..:2_2592-5-A/01Issue Date:19.09.01Page 7 (54) Equipment under test : IEEE802.11b PC card WLP1100 (E020EB01) Ambient temperature : 24° °° °C Relative humidity : 34% REFERENCE NUMBER(S) OF TEST EQUIPMENT USED (for reference numbers see test equipment listing) 64 SPECTRUM BANDWITH OF DSSS-SYSTEMSUBCLAUSE § 15.247 (a)(2) TEST CONDITIONS6 dB BANDWIDTH ( kHz ) Frequency (MHz)241224422472 T nom ( 24 )° °° °C V nom ( 3.3 )V111721122211222 Measurement uncertainty±3dB RBW = 100 KHz, Span >> RBW, here 25 MHz LIMIT SUBCLAUSE §15.247(a) (2) The minimum 6dB bandwith shall shall be at least 500 KHz CETECOM ICT Services GmbH Test report nr..:2_2592-5-A/01Issue Date:19.09.01Page 8 (54) Equipment under test : IEEE802.11b PC card WLP1100 (E020EB01) Ambient temperature : 24° °° °C Relative humi…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Test report nr..:2_2592-5-A/01Issue Date:19.09.01Page 49 (54) Test site RADIATED EMISSIONS Picture 1: CETECOM ICT Services GmbH Test report nr..:2_2592-5-A/01Issue Date:19.09.01Page 50 (54) Photographs of the equipment