PT5RC9800IEntertainment System Remote Control

RC9800i Touch Screen Remote Control User Manual Philips Innovative Applications RC9800i Touch Screen Remote Control - User Manual Guide Through the User Manual Philips Innovative Applications Page 2 of 39 User Manual RC9800i Touch Screen Remote Control Copyright 2004 Philips Innovative Applications, Interleuvenlaan 72, 3000 Leuven (Belgium). Remark: No part of this manual may be reproduced by means of printing or photocopying nor may it be translated into a different language without prior written consent of Philips Innovative Applications. Philips Innovative Applications is not liable for possible mistakes in this manual or for damages directly or indirectly resulting from the use of the RC9800i Touch Screen Remote Control. Concept and Realization of the Guide: The Human Interface Group De Regenboog 11, 2800 Mechelen (Belgium) http://www.higroup.com RC9800i Touch Screen Remote Control - User Manual Important Information Philips Innovative Applications Page 3 of 39 Important Information Please install and connect the RC9800i Touch Screen Remote Control only in the order described in this manual. This assures best installation results without technical issues. Please read this guide carefully before using the RC9800i and keep it for future reference. The most recent downloads and information on this product is are available through our website www.homecontrol.philips.com Broadband Internet access (min. 256 kbps) is required if you want to use the Internet functions of the RC9800i. Please check whether your Internet service provider charges extra additional fees for exceeding a certain limit of transferred data limit. When using Internet media services on a daily basis, you may exceed such a limit. For example: When you listen to Internet radio (at 64 kbps) for about 36 hours, 1 GB (gigabyte) of data will be transferred to your system. During set-up and installation, it may be helpful to have the original remote controls for your TV set, audio system and other wireless network components (if appropriate) at hand. Software information concerning Internet Radio will be available in the course of 2005, along with a software upgrade. Safety Precautions Before operating the system, check that the operating voltage indicated on the nameplate (or the voltage indication beside the voltage selector) of your system is identical with the voltage of your local power supply. If it is not, please consult your dealer. Radio equipment for wireless applications is not protected against disturbance from other radio services. Do not expose the product to dripping or splashing. Do not expose the product to excessive moisture, rain, sand or heat from heating equipment or direct sunlight. Do not open the product. Contact your Philips retailer if you experience technical difficulties. IFU Approbation / Safety Content RC9800i FCC Compliancy This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device should not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. RC9800i Touch Screen Remote Control - User Manual Important Information Philips Innovative Applications Page 4 of 39 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rule. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning thee equipment off and on, the user is encouraged to try to correct the interference by using one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into to an outlet on a different circuit from the receiver. Consult the dealer or an experienced radio/TV technician for help. CAUTION: User changes or modifications not expressly approved by the party responsible for compliance may void the user’s authority to operate the equipment. Regulations According to R&TTE Declaration Hereby, Philips Remote Control Systems hereby declares that this universal remote control is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC: Radio: EN 300 328 EMC: ETSI EN 301 489-1, ETSI EN 301 489-17 Safety: EN60950 Finnish Philips Consumer Electronics, Remote Control Systems vakuuttaa täten että RC9800i tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Dutch Hierbij verklaart, Philips Consumer Electronics, Remote Control Systems dat het toestel RC9800i in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. French Par la présente, Philips Consumer Electronics, Remote Control Systems, déclare que l'appareil RC9800i est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE Swedish Härmed intygar, Philips Consumer Electronics, Remote Control Systems, att denna RC9800i står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Danish Undertegnede Philips Consumer Electronics, Remote Control Systems erklærer herved, at følgende udstyr RC9800i overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF German Hiermit erklärt Philips Consumer Electronics, Remote Control Systems die Übereinstimmung des Gerätes RC9800i mit den grundlegenden Anforderungen und den anderen relevanten Festlegun…

Text truncated - open the document above for the full version.

TRP Inc. 14085 Howard Rd Dayton, MD 21036 August 4, 2004 Federal Communications Commission Authorization & Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: Philips Industrial Activities Louvain FCC ID: PT5RC9800I Gentlemen: Submitted herewith, on behalf of Philips Industrial Activities Louvain, is an application for Part 15 certification of the RF Transmitter, 802.11b, Remote Control. Attached are the authorization letter, measurement report (measurement data and test plots), FCC ID label and location, test setup photographs, internal and external photographs, block diagram, schematic diagram, operational description, parts list and the user's manual. Should you have any questions or comments concerning the above, please contact the undersigned. Phillip Inglis TRP Inc. cc: Philips Industrial Activities Louvain

12 N.V. Phil i ps Ind ust r ia I Activities Fabrieken te Leuven lnterleuvenlaan 74-76 B-3001 Leuven Tel +3216390611l811 Confidentiality Request Letter 04/08/2004 TCB CETECOM Benelux bvba Hector HENNEAULAAN ,97 BELGIUM B-1930 ZAVENTEM Request of Confidentiality Pursuant to Sections 0.457(d)(I )(ii) and 0.459 of the Commission's Rules, the Applicant hereby requests confidential treatment of information accompanying as outlined below: Schematics, Technical Description, Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule O,457(d)(l)(ii), disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Sincerely, NGeorges Blauwet Operations Manager RCS Leuven +32'(0) 16 394 605 Fax +32 (0) 16 394 601 B T W 435 787 742 H R Leuven 73 471 FACSIMILE lTCL +32 16 3906001601 Facsimile RCS +32 16 8001801 Teieyramadres PHILELEC Leuven MaatschaDpel(ke zelel de Brouck4repleln 2 (B 121 8-1000 BrYSSel G B 230-0054000-88

PHILIPS FCC ID: PT5RC9800I EUT Photographs © 2004 PCTEST Lab. Entertainment System Remote Control Model: RC9800i PHILIPS FCC ID: PT5RC9800I EUT Photographs © 2004 PCTEST Lab. Entertainment System Remote Control Model: RC9800i PHILIPS FCC ID: PT5RC9800I EUT Photographs © 2004 PCTEST Lab. Entertainment System Remote Control Model: RC9800i PHILIPS FCC ID: PT5RC9800I EUT Photographs © 2004 PCTEST Lab. Entertainment System Remote Control Model: RC9800i PHILIPS FCC ID: PT5RC9800I EUT Photographs © 2004 PCTEST Lab. Entertainment System Remote Control Model: RC9800i PHILIPS FCC ID: PT5RC9800I EUT Photographs © 2004 PCTEST Lab. Entertainment System Remote Control Model: RC9800i

3104 200 0592 Approbation sticker iBoard CLASS NO SCALE SCHAAL PROJ EUROP GENERAL ROUGHNESS ALGEMENE RUWHEID UNIT EENH. mm ITEM POST ASSEMBLY NO. SAMENSTELLINGSNR. QUANT. AANTAL NAME NAAM CHECK CONTR. DAT. SUPERS. VERV. Property of Eigendom van N.V. PHILIPS GLOEILAMPENFABRIEKEN EINDHOVEN - NEDERLAND 2822 100 02501 TOLERANCES UNLESS OTHERWISE STATED TOLERANTIES TENZIJ ANDERS VERMELD DIMENSION MAAT ANGLE HOEK MA TERIAL MA TERIAAL TREA TMENT BEHANDELING . . . . . . UN-D 28 . . R a in um , A A UN-D 603 PATTERN NO./MODELNR. ORDER NO./ORDERNR. QUANT. AANTAL PHILIPS RC9800i/17 Chrisse Wachtelaer PL2004-03-26 2004-04-16 2004-06-01 2004-04-16 01 110 0110 2 1 ENVIRONMENTAL REQUIREMENT : NO BANNED SUBSTANCES ACC. TO UAW-0480/100 A4 ALL RIGHTS ARE RESER VED, REPRODUCTION IN WHOLE OR IN P AR T IS PROHIBITED WITHOUT THE WRITTEN CONSENT OF THE COPYRIGHT OWNER. 60 +/-0.2 53 +/-0.2 39,1 +/-0.2 50,2 +/-0.2 14,2 +/-0.2 R2 +/-0.2 5 +/-0.2 55 +/-0.2 15 +/-0.2 45 +/-0.2 Thickness inclusive adhesive = 0,4 max This area free of self adhesive Front side Punching direction Rear side self adhesive FCC ID : PT5RC3500i IC: 135P-RC3500i < Outline artwork version to use for printing on the product. 3104-200-0592-2-110 (2004-06-01).eps RC3500i/17 PL1A0000 000001 SERIAL NUMBER RC3500i 3104 207 14881 PL 00 0000 000001 00 PRINTING REQUIREMENTS - Frontside : no printing - Rearside : acc. to UAN-D1235 : App30 - Clim1 -ADHESIVE REQUIREMENTS - Rearside has to be self adhesive and adhesive and protected with an easely removable layer - Adhesive specification equivalent to Mactac-Macband B1148 GENERAL REQUIREMENTS - PCB and PCT free acc. to UAN-D1675 - Cadmium free acc. to UAN-D1597 - Product must be free from scratches and damages 1/1 6NE100 Polypropylene Axprint Fine Sand. Thickness 0.3 mm. PRINTING - Print on back side acc. to OUTLINE ARTWORK version on this drawing. color text : white according to 90008 color background : Dark Grey Metallic according to sample no K032045. Color of two rectangular areas: No printing, it will be transparent. Transparent areas ! RC3500i/17 FCC ID : PT5RC3500i IC: 135P-RC3500i RC9800i/17 FCC ID : PT5RC9800i IC: 135P-RC9800i Philips Consumer Electronics NA, One Philips Drive, P. O. Box 14810, Knoxville, Tennessee 37914 - 1810 U. S. A. MADE IN B E L G IU M 3, 7 V 1A 04 06-01 - Text of printing is changed

PHILIPS FCC ID: PT5RC9800I EUT Photographs © 2004 PCTEST Lab. Entertainment System Remote Control Model: RC9800i PHILIPS FCC ID: PT5RC9800I EUT Photographs © 2004 PCTEST Lab. Entertainment System Remote Control Model: RC9800i PHILIPS FCC ID: PT5RC9800I EUT Photographs © 2004 PCTEST Lab. Entertainment System Remote Control Model: RC9800i PHILIPS FCC ID: PT5RC9800I EUT Photographs © 2004 PCTEST Lab. Entertainment System Remote Control Model: RC9800i PHILIPS FCC ID: PT5RC9800I EUT Photographs © 2004 PCTEST Lab. Entertainment System Remote Control Model: RC9800i

CETECOM ICT Services GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken, Germany Phone: +49 (0) 681 598-0 Fax: -8475 SAR-Laboratory Phone: +49 (0) 681 598-8454 . As of 2004-07-30 Page 1 of 35 Accredited testing laboratory DAR registration number: TTI-P-G 081/94-D0 Federal Motor Transport Authority (KBA) DAR registration number: KBA-P 00070-97 Test report no. : 4-1293-02-03/04 Type identification : iboard RC9800i Test specification : IEEE P1528/D1.2 FCC-ID : PT5RC9800I Test specification : CETECOM ICT Services GmbH Test report no.: 4-1293-02-03/04 As of 2004-07-30 Page 2 of 35 Table of Contents 1 General Information...................................................................................................................................................................................3 1.1 Notes......................................................................................................................................................................................................3 1.1.1 Statement of Compliance........................................................................................................................................................3 1.2 Testing laboratory................................................................................................................................................................................4 1.3 Details of applicant..............................................................................................................................................................................4 1.4 Application details...............................................................................................................................................................................4 1.5 Test item................................................................................................................................................................................................5 1.6 Test specification(s)............................................................................................................................................................................6 1.6.1 RF exposure limits....................................................................................................................................................................6 2 Technical test...............................................................................................................................................................................................7 2.1 Summary of test results......................................................................................................................................................................7 2.2 Test environment.................................................................................................................................................................................7 2.3 Measurement and test set-up.............................................................................................................................................................7 2.4 Measurement system...........................................................................................................................................................................8 2.4.1 System Description...................................................................................................................................................................8 2.4.2 Test environment......................................................................................................................................................................9 2.4.3 Probe description......................................................................................................................................................................9 2.4.4 Phantom description...............................................................................................................................................................10 2.4.5 Device holder description......................................................................................................................................................10 2.4.6 Scanning procedure................................................................................................................................................................11 2.4.7 Spatial Peak SAR Evaluation...............................................................................................................................................12 2.4.8 Data Storage and Evaluation.................................................................................................................................................13 2.4.9 Test equipment utilized..........................................................................................................................................................15 2.4.10 Tissue simulating liquids : dielectric properties................................................................................................................16 2.4.11 Tissue simulating liquids : parameters................................................................................................................................17 2.4.12 Measurement uncertainty evaluation for SAR test...........................................................................................................18 2.4.13 Measurement uncertainty evaluation for system validation............................................................................................19 2.4.14 System validation....................................................................................................................................................................20 2.4.15 Validation procedure...........................................................…

Text truncated - open the document above for the full version.

CETECOM ICT Services GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken, Germany Phone: +49 (0) 681 598-0 Fax: -8475 SAR-Laboratory Phone: +49 (0) 681 598-8454 . As of July 30, 2004 Page 1 of 27 Accredited testing laboratory DAR registration number: TTI-P-G 166/98 Federal Motor Transport Authority (KBA) DAR registration number: KBA-P 00070-97 Calibration data and Phantom information for test report no. 4-1293-02-03/04 Test specification : CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 2 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 3 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 4 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 5 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 6 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 7 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 8 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 9 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 10 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 11 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 12 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 13 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 14 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 15 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 16 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 17 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 18 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 19 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 20 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 21 of 27 CETECOM ICT Services GmbH Calibration Data and Phantom Information; Report No.: 4-1293-02-03/04 As of July 30, 2004 Page 22 of 27 Application Note System Perormance Check Purpose of validation The system performance check verifies that the system operates within its specifica-tions. System and operator errors can be detected and corrected. It is recommended that the system performance check is performed prior to any usage of the system in order to guarantee reproducible results. The measurement of the Specific Absorption Rate (SAR) is a complicated task and the result depends on the proper functioning of many components and the correct settings of many param-eters. Faulty results due to drift, failures or incorrect parameters might not be recognized, since they often look similar in distribution to the correct ones. The Dosimetric Assessment System DASY4 incorporates a system performance check procedure to test the proper functioning of the system. The system performance check uses normal SAR measurements in a simplified setup (the at section of the SAM Twin Phantom) with a well characterized source (a matched dipole at a specified distance). This setup was selected to give a high sensitivity to all parameters that might fail or vary over time (e.g., probe, liquid parameters, and software settings) and a low sensitivity to external effects inherent in the system (e.g., positioning uncertainty of the device holder). The system performance check does not replace the calibration of the components. The accuracy of the system performance check is not sufficient for calibration purposes. It is possible to calculate the field quite accurately in this simple setup; however, due to the open field situation some factors (e.g., laboratory re ections) cannot be accounted for. Calibrations in the at phantom are possible with transfer calibration methods, using either temperature probes or calibrated E-field probes. The system performance check also does not test the system performance for arbitrary field sit-uations encountered during real measurements of mobile phones. These checks are performed at SPEAG by testing the components under various conditions (e.g., spherical isotropy measurements in liquid, linearity measurements, temperature variations, etc.), the results of which are used for an error estimation of the system. The system performance check will indicate situations where the system uncertainty is exceeded due to drift or failure. System Performance check procedure Preparation The conductivity should be measured before the validation and the measured liquid parameters must be entered in the software. If the measured values differ from targeted values in the dipole document, the liquid composition should be adjusted. If the validation is performed with slightly different (measured) liquid parameters, the expected SAR will also be different. See the application note about SAR sensitivities for an estimate of poss…

Text truncated - open the document above for the full version.

© 2004 PCTEST Engineering Laboratory, Inc.

         ∑ ∑∑ ∑ !"#∑ ∑∑ ∑$  %%&'%"! (# )*+"! (#" ',,&-))...&/,%0,/1%-234&/,%0,/5 

 


   $* $   6  - 6   * -   ,%1057%0,0-83 ( "  ! %0, %&2,)-!# "9!("" 
# "#$$% &"'( %0,,%-
   * -
# (: 

 -
'&0 0,2 /,;,%0 ;  $ - %- (: <&%,$3&%-,%2,%,30,% %,%,2 +,&,
.%2-!99= 1! "9 5/,% *2%<%/3 >%- "! ? " @A *007/,->,200030,%15 * %
2,105-
2,0!# "9B  ?C"? ! %0,%;/%%2-)-#  )(*+**,(+* ((++((, -
.#/!$$%/, 01(*(&(+'/ 2
3 +/(*'+1 (4*,'/(*+',,1' 4(/(*+4(/ 51,/((+,(*1(+( (1*,(16+'*,/(,*1, (,((,),,6'(/
                           !""#$%&&&"'$&     






 
 


 






 !"
#
#$
!# "9




*  *    
  %
&'(

)  '
* +
*%%-

,- 
%0,,%0-
. '
- 
,,
$3&%-#   
' 
 / 
/ /
* -  -0,,1

>%

/2

© 2004 PCTEST Engineering Laboratory, Inc.
$ 31#3 1!
$# 4
$
 #





!" #
$
$3 #3 
! # ! 1$3
 ! #*#3 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 

!

*#!6#*#3
#$
$7#
!8# 

,
13 $6 1$3  9

#7! 6! 1$3
$#6# 9

$# 9
9
 #
#
$! 1$3  9

,
$6
13$*! 1$3  


#)61*#3
#1 1$3  

#3 $6#  
9

#*1
6#1$3
#71#:*$11! 1$3  

9,
#1 1$3
$
#  
9
$36 #
#*11$3 
9
!1! #
#*11$3 ;

,
!3 #33!
#)61#*#3   

,
#
#)61*#3
! 1"! 1$3
! ! 0

#<=1"1
!
6**!4
$
#
#6  -
#<=1"1
!
;"
"!3> 1 =
*#!6#*#3  ,?
#<=1"1
!


$6 6
$> #
*#!6#*#3  9?
#<=1"1
!
$> #
# !
#31 4 ;?-
#<=1"1
!

"!3#8#  ,
#<=1"1
!
!1! #
63!*#3 !
@
=!*$31
*#!6#*#3  ?0
#<=1"1
!
!1! #
61$6
*#!6#*#3 …

Text truncated - open the document above for the full version.

PHILIPS FCC ID: PT5RC9800I EUT Photographs © 2004 PCTEST Lab. Entertainment System Remote Control Model: RC9800i PHILIPS FCC ID: PT5RC9800I EUT Photographs © 2004 PCTEST Lab. Entertainment System Remote Control Model: RC9800i PHILIPS FCC ID: PT5RC9800I EUT Photographs © 2004 PCTEST Lab. Entertainment System Remote Co…

Text truncated - open the document above for the full version.