PUU-CSWFSBLBWF1Ceiling Fan Smart Switch

™ Ceiling Fan Smart Switch Installation Guide WARN ING: R ISK OF E LECTRIC SHOCK This product installation requires handling 120 volt wiring. Follow each step carefully. If any concerns handling wiring, hire a qualified electrician. Ensure all work meets local and federal regulations. WARNING: This control must be installed with an external Isolating Wall Control/Switch in series with the ungrounded conductor, providing an air gap as per ANSI/NFPA 70 article 404 Download the C by GE a pp Install your Smart Sw itch Ad d your Smart S witch t o the C by GE a pp Simple DIY Setup Rating 120 V AC 60 Hz Neutral wire is required (wire is usually white or grey) Ground wire is required (Wire is usually green, green with a yellow stripe, or copper) Wi-Fi 802.11 b/g/n @ 2.4 GHZ is required Works with compatible ceiling fans. Visit cbyge.com/compatibility Com pa tibilit y Requirements Let’s Do It INCLUDED YOU’LL NEED Switch Wire Labels LineLoadNeutral Wall Plate4 Wire Nuts 4 Phillips Mounting Screws Ground Phillips Screwdriver Needle Nose Pliers (recommended) Approximately 30 minutes of your day to install and setup the switch 12 6 39 Voltage Tester (recommended) You Got This! And we're here to help. For in-depth instructional videos and a guided tour through the installation, go to cbyge.com/switch-support. NOTE: Please make sure your system is up-to-date and you update the firmware when prompted for the best experience. ONOFF BEFORE Y OU DO ANYTHIN G: Step 1 Turn Off The P ower! 1. Turn off the power for the switch location at the circ uit breaker box. 2. Test existing switch by togglin g switch on/off, ensuring lights do not turn on. 3. Now, follow these setup steps for a single gang switch. 1. Remove the existing wall plate and switch fro m the wall. 2. Use voltage tester on the black wires to confirm power to the swit ch is off (recommended). 3. Before disconnecting the wires fro m the wall, label each with the pro vided wire labels. Neutral and ground wires are required. If you don’t have eit her wire, the C by GE Fan Control Switch is not compatibl e. 4. Disconnect wires and remove existing switch. STEP 2 Remove Your Old Switch Wire Labels LineLoadNeutral Ground Ground Line Load Neutral STEP 3 Connect The Wires 1. Connect the neutral (white) wire on the switch to the neutral (white label) wire from the wall. 2. Connect the line (black) wire on the switch to the line (black label) wire from the wall. 3. Connect the load (black) wire on the switch with the load (black label) wire from the wall. 4. Connect the ground (green) wire on the switch with the ground (green label) wire from the wall. 5. Cap the 3-way/mu lti-way traveler wire (if applicable). For 3-way switch setup, visit cbyge.com/switch-support Attention: Incorrectly connecting the Neutral or Ground wire from the wall to the Line or Load wire on the switch will damage the product. USING WIRE NUTS 1. Insert wires into wire nut. 2. Turn wire nut clockwise. 3. Pull gently on wires to test connection. 3/4 inch Neutral Ground Load Line Neatly push the wires back into the box, rotating the switch so it’s oriented according to the image. STEP 4 Fit Wires Into Wall Box Load Ground Line Neutral 1. Using a Phillips screwdriver and the screws provided, secure the switch to the wall until level and flush. 2. Screw on the faceplate bracket, then snap the faceplate cover onto the bracket. STEP 5 Secure The Switch After the switch is secured and faceplate mounted, turn the power back on at the circ uit breaker box. At the switch, the LED indicator will flash blue indicating the device is wired correctly and the device is in set up mode. STEP 6 Turn The Power Back On ONOFF LED indicator light or light ring will flash blue until the switch is added to the C by GE app. LED indicator light or light ring will not illuminate if wired incorrectly. TROUBLESHOOTING IF FAN DOESN’T TURN ON: 1. Check that power to the switch is on at the breaker. 2. Turn power off at the breaker, return to the switch to confirm the wires are securely and properly wired according to the installation guide. 3. Go to cbyge.com/switch-support for more troubleshooting. You’ve completed t he S mart S witch i nstallation. Next... Download the C by GE a pp Setup your A lexa or Google v oic e assistant ( optional) Ad d your Smart S witch t o the C by GE a pp Congratulations! Amazon Alexa To setup, open the Alexa app, search for the C by GE ski ll, follow the setup instructions. Try this... Alexa, turn off the living room. Alexa, turn on the bedroom. Alexa, set fan to speed 3. Google Assistant To setup, open the Google Assistant or Google Home app, search for the C by GE action, follow the setup instructions. Try this... Okay Google, turn off the fan. Okay Google, I'm leaving. Okay Google, turn fan up. Enable Your Voice Assistant Additional Information and Warnings FCC Compliance Statement Compliance Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information: This …

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (obsolete) 4.0 5.0 Sep-16-2014 Updated company name & logo (current) 5.0 6.0 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0 Consumer Lighting (U.S.) LLC dba GE Lighting, a Savant Company 2020/9/9 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _____ Consumer Lighting (U.S.) LLC dba GE Lighting, a Savant Company _____ hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: PUU-CSWFSBLBWF1 Product Description: Ceiling Fan Smart Switch Model: CSWFSBLBWF1 Sincerely, Client’s signature Client’s name / title : Paul Smith / Systems Engineer – Safety & Regulatory Contact information / address : 1975 Noble Road, Cleveland, Ohio 44112, United States.

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (obsolete) 4.0 5.0 Nov-19-2015 Updated company logo (current) 5.0 6.0 Jun-26-2019 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 6.0 Consumer Lighting (U.S.) LLC dba GE Lighting, a Savant Company 2020/9/9 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: PUU-CSWFSBLBWF1 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature: Client’s name & title: Paul Smith/ Systems Engineer – Safety & Regulatory Contact information / address: 1975 Noble Road, Cleveland, Ohio 44112, United States.

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (obsolete) 4.0 5.0 Nov-19-2015 Updated company logo (current) 5.0 6.0 Jun-26-2019 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 6.0 Consumer Lighting (U.S.) LLC dba GE Lighting, a Savant Company 2020/9/9 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: PUU-CSWFSBLBWF1 To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days; or for a specified date of / / not to exceed 180 days from the Grant Date. See KDB 726920. - User Manual - Internal Photos - Test Setup photos - External Photos - The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Client’s signature: Client’s name & title: Paul Smith/ Systems Engineer – Safety & Regulatory Contact information / address: 1975 Noble Road, Cleveland, Ohio 44112, United States

SCS-F190 WiFi Channel 12&13 Declaration Letter Page 1 of 2 Rev.2.0 Created by William Graff Approved by Bao-Thuong Nguyen WIFI Channel 12 and 13 Declaration Letter Reason for Amendment Revision History Approved Date From To Initial Release (obsolete) Initial 1.0 December 22, 2015 Modify the select options (current) 1.0 2.0 September 23, 2016 SCS-F190 WiFi Channel 12&13 Declaration Letter Page 2 of 2 Rev.2.0 Created by William Graff Approved by Bao-Thuong Nguyen Consumer Lighting (U.S.) LLC dba GE Lighting, a Savant Company WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: PUU-CSWFSBLBWF1 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels can’t be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note: 1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following: Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Paul Smith/ Systems Engineer – Safety & Regulatory Signature: Phone: (216) 266-2189 Email: [email protected] Date: 2020.9.9

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 4 Report Version 1 Reference No.: 200623N006 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 4 Report Version 1 Reference No.: 200623N006 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 4 Report Version 1 Reference No.: 200623N006 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 4 Report Version 1 Reference No.: 200623N006

物料名称： 物料编号： 流水号： 页数： 版本： 比例： 图纸： 表面处理： 材料： 机型号：制图： 审核： 核准： 单位：MM 第三视角 公差值 角度尺寸范围 公差值 线性尺寸范围 数量 修 改 标记 更改说明 签名 日期 0.3 < X ≤ 3.0 ±0.06 0.3 < X ≤ 3.0 3.0 < X ≤ 6.0 6.0 < X ≤ 30 30 < X ≤ 120 120 < X ≤ 400 400 < X ≤ 1000 3.0 < X ≤ 6.0 6.0 < X ≤ 30 30 < X ≤ 120 120 < X ≤ 360 ±1° ±0.10 ±0.20 ±0.40 ±0.80 ±1.20 A3 1:1 V1.0 1/1 A B CD E F G H I J A B CD E F G H I J 1 2 3 4 5 6 7 1 2 3 4 5 6 7 必须符合TCL《公司环境管理物质标准》。 TONLY ELECTRONICS HOLDINGS LIMITED 通力电子控股有限公司 此文件属公司机密文件，版权属通力电子控股有限 公司所有，任何人未经允许不得复制、抄袭。任何部门 如有需求，须向通力电子研发申请。 This file is a confidential document in company，The copyright totally belongs to Tonly electronic holdings Limited，Anybody who are unauthorized is forbidden to copy and plagiarize the file。Any Department must get permission from the Tonly R&D if they need to use one。 fan switch GROUNDNEUTRALLOAD/LINE 1.8mm 9mm 1.8mm 5.8mm5.8mm 镭雕，左右居中 字体：Arial, 6pt 镭雕 字体：Arial, 4.5pt 技术要求： 1.镭雕位置要准确； 2.内容正确，不允许出现漏雕、烧焦、白点、边沿模糊等不良现象； 3.YYDDDTL:YY为年，DDD为日，YYDDD需按订单要求时间变化；TL表示TONLY,不变 4.公差+/-0.5mm PC面盖，铝合金底盖 面盖，底盖 陈 兰 镭雕 镭雕 字体：Arial, 4.5pt 镭雕WIFI MAC地址 镭雕,上下居中 镭雕 4mm 3mm 2.5mm 2.1mm 4.6mm 15.5mm 5mm 2.6mm 4.7mm 6.6mm 3.4mm XXXXXXXXXXXX 120V AC 60Hz Max FLA 1.5A, LRA 9A Up YYDDDTL E514900 FCC ID: PUU-CSWFSBLBWF1 IC: 10798A-CSWFSBLBWF1 Designed in U.S.A. Made in China CSWFSBLBWF1 Ceiling Fan Smart Switch cbyge.com 5.5mm 变量： YY:年份 DDD:天数,一年的第几天 TL:Tonly 镭雕,上下居中 字体：Arial, 4.5pt

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 3 Report Version 1 Reference No.: 200623N006 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 3 Report Version 1 Reference No.: 200623N006 WIFI ANT BT ANT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 3 Report Version 1 Reference No.: 200623N006

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 7 Report Version 1 Test Report No.: FM200623N006 RF EXPOSURE REPORT Applicant Consumer Lighting (U.S.) LLC dba GE Lighting, a Savant Company Address 1975 Noble Road, Cleveland, Ohio 44112, United States. Manufacturer or Supplier Consumer Lighting (U.S.) LLC dba GE Lighting, a Savant Company Address 1975 Noble Road, Cleveland, Ohio 44112, United States. Product Ceiling Fan Smart Switch Brand Name GE Model CSWFSBLBWF1 Additional Model & Model Difference N/A Date of tests Jun. 23, 2020 ~ Sep. 09, 2020 FCC Part 2 (Section 2.1091) KDB 447498 D01 IEEE C95.1 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Tom Chen Project Engineer / EMC Department Approved by Glyn He Assistant Manager / EMC Department Date: Sep. 09, 2020 This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 7 Report Version 1 Test Report No.: FM200623N006 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................ 3 1. CERTIFICATION .............................................................................................. 4 2. RF EXPOSURE LIMIT ..................................................................................... 5 3. MPE CALCULATION FORMULA ..................................................................... 5 4. CLASSIFICATION ........................................................................................... 5 5. ANTENNA GAIN .............................................................................................. 6 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ................... 6 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 7 Report Version 1 Test Report No.: FM200623N006 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED FM200623N006 Original release Sep 09, 2020 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 7 Report Version 1 Test Report No.: FM200623N006 1. CERTIFICATION PRODUCT: Ceiling Fan Smart Switch BRAND NAME: GE MODEL NO.: CSWFSBLBWF1 ADDITIONAL MODEL: N/A FCC ID: PUU-CSWFSBLBWF1 TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: Consumer Lighting (U.S.) LLC dba GE Lighting, a Savant Company STANDARDS: FCC Part 2 (Section 2.1091) KDB 447498 D01 IEEE C95.1 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 5 of 7 Report Version 1 Test Report No.: FM200623N006 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 6 of 7 Report Version 1 Test Report No.:…

Text truncated - open the document above for the full version.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 41 Report Version 1 Test Report No.: RF200623N006-1 TEST REPORT Applicant Consumer Lighting (U.S.) LLC dba GE Lighting, a Savant Company Address 1975 Noble Road, Cleveland, Ohio 44112, United States. Manufacturer or Supplier Consumer Lighting (U.S.) LLC dba GE Lighting, a Savant Company Address 1975 Noble Road, Cleveland, Ohio 44112, United States. Product Ceiling Fan Smart Switch Brand Name GE Model CSWFSBLBWF1 Additional Model & Model Difference N/A Date of tests Jun. 23, 2020 ~ Sep. 09, 2020 the tests have been carried out according to the requirements of the following standard: FCC Part 15, Subpart C, Section 15.247 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Tom Chen Project Engineer / EMC Department Approved by Glyn He Assistant Manager / EMC Department Date: Sep. 09, 2020 This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 41 Report Version 1 Test Report No.: RF200623N006-1 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 4 1 SUMMARY OF TEST RESULTS .................................................................................................... 5 2 MEASUREMENT UNCERTAINTY ................................................................................................. 5 3 GENERAL INFORMATION ............................................................................................................ 6 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................. 6 3.2 DESCRIPTION OF TEST MODES ............................................................................................... 7 3.2.1. CONFIGURATION OF SYSTEM UNDER TEST ............................................................... 7 3.2.2. TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .................................... 7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................ 10 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................................... 10 4 TEST TYPES AND RESULTS .......................................................................................................11 4.1 CONDUCTED EMISSION MEASUREMENT .............................................................................. 11 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ................................................ 11 4.1.2 TEST INSTRUMENTS ...................................................................................................... 11 4.1.3 TEST PROCEDURES ..................................................................................................... 12 4.1.4 DEVIATION FROM TEST STANDARD ........................................................................... 12 4.1.5 TEST SETUP ................................................................................................................... 13 4.1.6 EUT OPERATING CONDITIONS .................................................................................... 13 4.1.7 TEST RESULTS .............................................................................................................. 14 4.2 RADIATED EMISSION MEASUREMENT .................................................................................. 16 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT .................................................... 16 4.2.2 TEST INSTRUMENTS ..................................................................................................... 17 4.2.3 TEST PROCEDURES ..................................................................................................... 18 4.2.4 DEVIATION FROM TEST STANDARD ........................................................................... 19 4.2.5 TEST SETUP ................................................................................................................... 19 4.2.6 EUT OPERATING CONDITIONS ...................…

Text truncated - open the document above for the full version.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 52 Report Version 1 Test Report No.: RF200623N006-2 TEST REPORT Applicant Consumer Lighting (U.S.) LLC dba GE Lighting, a Savant Company Address 1975 Noble Road, Cleveland, Ohio 44112, United States. Manufacturer or Supplier Consumer Lighting (U.S.) LLC dba GE Lighting, a Savant Company Address 1975 Noble Road, Cleveland, Ohio 44112, United States. Product Ceiling Fan Smart Switch Brand Name GE Model CSWFSBLBWF1 Additional Model & Model Difference N/A Date of tests Jun. 23, 2020 ~ Sep. 09, 2020 The tests have been carried out a…

Text truncated - open the document above for the full version.