PWVW202ERADSL Modem

VisionNet VisionNetVisionNet VisionNet 202ER ADSL Ethernet Router User’s Manual Revision 1.1 February 27, 2003 VisionNet 202ER ADSL Ethernet Router User’s Guide iii Table of Contents 1 Introduction .......................................................... 9 Features.................................................................................. 9 System Requirements ........................................................... 9 Using this Document............................................................ 10 Notational conventions................................................. 10 Typographical conventions .......................................... 10 Special messages......................................................... 10 2 Getting to Know the VisionNet 202ER ............. 11 Parts Check .......................................................................... 11 Front Panel ........................................................................... 12 Rear Panel............................................................................ 13 3 Quick Start ......................................................... 15 Part 1 — Connecting the Hardware.................................... 15 Step 1. Connect the ADSL cable and optional telephone. .................................................................. 16 Step 2. Connect the Ethernet cable............................. 17 Step 3. Attach the power connector. ........................... 17 Step 4. Turn on the VisionNet 202ER and power up your systems. ............................................ 17 Part 2 — Configuring Your Computers .............................. 18 Before you begin ........................................................... 18 Windows 95, 98 PCs: ................................................ 18 Windows NT 4.0 workstations: .................................... 19 Windows 2000 PCs: ..................................................... 20 Windows Me PCs ......................................................... 21 Assigning static Internet information to your PCs ............................................................................. 22 Part 3 — Configuring the VisionNet 202ER ..................23 Logging in to the VisionNet 202ER Quick Setup .......................................................................... 23 Operation Mode ............................................................ 24 VisionNet 202ER ADSL Ethernet Router User’s Guide iv DNS Settings................................................................. 24 PPP Settings ................................................................. 24 Default Router Settings ................................................ 25 Testing Your Installation ...................................................... 26 Using VisionNet’s Diagnostic Utilities ................................. 27 4 Getting Started with the Configuration Manager.......................................................... 29 Accessing the Configuration Manager ............................... 29 Functional Layout................................................................. 31 Commonly used buttons .............................................. 31 The Home Tab and System View Table ............................ 32 Changing the System Date and Time ................................ 34 Changing the System Date and Time ................................ 34 Changing Your Login Password ......................................... 35 Committing Your Changes and Rebooting the Device................................................................................ 36 Committing your changes ............................................ 36 Rebooting the device using Configuration Manager ..................................................................... 37 5 Setting the LAN IP Address .............................. 39 Configuring the LAN IP Address ......................................... 39 6 Viewing System IP Information and Performance Statistics ................................... 43 Viewing the VisionNet 202ER’s IP addresses ................... 43 Viewing IP Global Statistics................................................. 44 7 Configuring Dynamic Host Configuration Protocol........................................................... 45 Overview of DHCP............................................................... 45 What is DHCP? ............................................................. 45 Why use DHCP?........................................................... 45 VisionNet 202ER DHCP modes .................................. 46 VisionNet 202ER ADSL Ethernet Router User’s Guide v Configuring DHCP Server ................................................... 47 Viewing, modifying, and deleting address pools, and excluding IP addresses from a pool ............................................................................. 50 Viewing current DHCP address assignments ............ 50 Configuring DHCP Relay..................................................... 52 Setting the DHCP Mode ...................................................... 53 8 Configuring Network Address Translation........ 55 Overview of NAT .................................................................. 55 Your Default NAT Setup ...................................................... 56 Viewing NAT Global Settings and Statistics ..................... 57 Viewing NAT Rules and Rule Statistics.............................. 60 Viewing Current NAT Translations ..................................... 61 Adding NAT Rules ............................................................... 63 The napt rule: Translating between private and public IP addresses ................................................... 63 The rdr rule: Allowing external access to a LAN computer............................................................ 65 The basic rule: Performing 1:1 translations ................ 68 The filter rule: Configuring a basic rule …

Text truncated - open the document above for the full version.

ADSL line LEDs GS8120 ADSL/Network Processor 144 TQFP SDRAM Serial Flash 16_bit SDRAM Interface SPI Diagnostic unit JTAG Titanium DSL Core RISC Μprocessor Core ADSL AFE Interface GS3780 ADSL AFE W/Integrated Line driver 64 LQFP MIC UART Ethernet MAC GPIO RS-RAM 10/100 Ethernet PHY Configuration port BLOCK DIAGRAM Tel line RJ-11 25.000 17.280

E E M M C C T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0308 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 14 of 14 EUT Front Rear E E M M C C T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0308 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 15 of 15 Inside AC/DC adapter

E E M M C C T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0308 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 18 of 18 Appendix – Sample Label TM DC5V 1.2A Made in Korea FCC ID : PWVW202ERFCC Registration Number : US : DQ1DL02B202ER REN : 0.2B Tested To Comply With FCC standards For Home or Office Use E221608 I.T.E2EW5 Bar-cord and S/N DQ Technology, Inc. ADSL W202ER Modem This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. M/N : W202ER & W202ES & W202 W708EUR & W708EU & W708 TM DC5V 1.2A Made in Korea FCC ID : PWVW202ERFCC Registration Number : US : DQ1DL02B202ER REN : 0.2B Tested To Comply With FCC standards For Home or Office Use E221608 I.T.E2EW5 Bar-cord and S/N DQ Technology, Inc. ADSL W202ER Modem This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. M/N : W202ER & W202ES & W202 W708EUR & W708EU & W708

TM DC5V 1.2A Made in Korea FCC ID : PWVW202ER FCC Registration Number : US : DQ1DL02B202ER REN : 0.2B Tested To Comply With FCC standards For Home or Office Use E221608 I.T.E 2EW5 Bar-cord and S/N DQ Technology, Inc. ADSL W202ER Modem This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. M/N : W202ER & W202ES & W202 W708EUR & W708EU & W708

E E M M C C T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0308 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 16 of 16 Mainboard(ADSL Modem) (Front) Mainboard(ADSL Modem) (Rear) E E M M C C T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0308 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 17 of 17 I/O Port veiw none

VisionNet 202ER ADSL Ethernet Router User’s Guide 9 1Introduction Congratulations on becoming the owner of the VisionNet 202ER ADSL Ethernet bridge/router. Your LAN (local area network) will now be able to access the Internet using your high-speed ADSL connection. This User Guide will show you how to install and set up the VisionNet 202ER ADSL Bridge/Router, and how to customize its configuration to get the most out of your new product. Features
Internal ADSL modem for high-speed Internet access
10/100Base-T Ethernet router to provide Internet connectivity to all computers on your LAN
Network address translation (NAT), Firewall, and IP filtering functions to provide security for your LAN
Network configuration through DHCP Server and DHCP Relay
Services including IP route and DNS configuration, RIP, and IP and DSL performance monitoring
Configuration program you access via an HTML browser System Requirements In order to use the VisionNet 202ER ADSL/Ethernet router, you must have the following:
ADSL service up and running on your telephone line, with at least one public Internet address for your LAN
One or more computers each containing an Ethernet 10Base-T/100Base-T network interface card (NIC)
An Ethernet hub/switch, if you are connecting the device to more than one computer on an Ethernet network.
For system configuration using the supplied web-based program: a web browser such as Internet Explorer v5.0 or later, or Netscape v6.2 or later VisionNet 202ER ADSL Ethernet Router User’s Guide 10 Using this Document Notational conventions
Acronyms are defined the first time they appear in text and in the glossary (Appendix D).
For brevity, the VisionNet 202ER is referred to as “the router.”
The terms LAN and network are used interchangeably to refer to a group of Ethernet-connected computers at one site. Typographical conventions
Italics are used to identify terms that are defined in the glossary (Appendix D).
Bolded text is used for items you select from menus and drop-down lists, and to identify field labels you view on- screen. Special messages This document uses the following icons to call your attention to specific instructions or explanations. Note Provides clarifying or non-essential information on the current topic. Definition Explains terms or acronyms that may be unfamiliar to many readers. These terms are also included in the Glossary. WARNING Provides messages of high importance, including messages relating to personal safety or system integrity. VisionNet 202ER ADSL Ethernet Router User’s Guide 11 2Getting to Know the VisionNet 202ER Parts Check In addition to this document, your VisionNet 202ER should arrive with the following (in picture, clockwise from upper left):
VisionNet 202ER ADSL Ethernet Router
Power adapter and power cord
CD with Manual
Quick Start Guide
Ethernet cable (“straight-through” type)
Standard phone/DSL line cable Figure 1. VisionNet 202ER ADSL/Ethernet Router Package Contents VisionNet 202ER ADSL Ethernet Router User’s Guide 12 Front Panel The front panel contains lights called LEDs that indicate the status of the unit. Figure 2. Front Panel and LEDs LabelWhen On PPP Solid green when using PPPoE or PPPoA, if the user has authenticated to the ISP’s server. LAN On: LAN link established and active. Off: No LAN link SYNC On: ADSL link established and active Blinking: DSL signal found Off: No ADSL link Tx/Rx Flashes when ADSL data activity occurs. May appear solid when data traffic is heavy. ACT On: Device passed self test Blinking: Device failed self test POWER On: Unit is powered on Off: Unit is powered off VisionNet 202ER ADSL Ethernet Router User’s Guid 13 Rear Panel The rear panel contains the ports for the unit's data and power connections. Figure 3. Rear Panel Connections LabelFunction POWER Switches the unit on and off DC INPUT Connects to the supplied power converter cable EthernetConnects the device to your PC's Ethernet port, or to the uplink port on your LAN's hub, using the cable provided PHONE Provides an in-line filter connection to your telephone LINE Connects the device to a telephone jack for DSL communication RESET Resets the device to the DQ’s default configuration (must be pressed 3 times to reset). VisionNet 202ER ADSL Ethernet Router User’s Guide 15 3Quick Start This Quick Start provides basic instructions for connecting the VisionNet 202ER to a computer or LAN and to the Internet.
Part 1 describes setting up the hardware.
Part 2 shows you how to configure basic settings on the VisionNet 202ER to get your LAN connected to the Internet. This Quick Start assumes that you have already established ADSL service with your Internet service provider (ISP). These instructions provide a basic configuration that should be compatible with your home or small office network setup. Refer to the subsequent chapters for additional configuration instructions. Part 1 — Connecting the Hardware In Part 1, you connect the device to the phone jack, the power outlet, and your computer or network. WARNING Before you begin, turn the power off for all devices. These include your computer(s), your LAN hub/switch (if applicable), and the VisionNet 202ER. Figure 4 illustrates the hardware connections. The layout of the ports on your device may vary from the layout shown. Refer to the steps that follow for specific instructions. VisionNet 202ER ADSL Ethernet Router User’s Guide 16 Figure 4. Overview of Hardware Connections Step 1. Connect the ADSL cable and optional telephone. Connect one end of the provided phone cable to the port labeled ADSL on the rear panel of the device. Connect the other end to your wall phone jack. You can attach a telephone line to the device. This is helpful when the ADSL line uses the only convenient wall phone jack. If desired, connect the telephone cable to the port labeled PHONE. WARNING Although you use the same type of cable, The ADSL and PHONE ports are not interchangeable. Do not route the A…

Text truncated - open the document above for the full version.

1/7 DRWN CHKD APRD Sheet 2003-07-28 Rev. Code 1.0 순번 SHOP Design Name Unit Q'ty Maker 1 SMD C42,43 EA 2 2 SMD C37,38 EA 2 3 SMD C92 EA 1 4 SMD C102 EA 1 5 SMD C88,90 EA 2 6 SMD C23,C25,C32,C33,C35,C22,C30,C20,C31,C26,C34, C36,C29,C19,C24,C21,C3,C6,C4,C2,C1,C7,C5 EA 23 7 SMD C98,C101 EA 2 8 SMD C41,C77,C85,C71,C76,C80,C79,C78,C44,C45,C48,C49,C46,C47,C62,C63,C64,C65,C66,C50,C52,C51, C12, C81,C11,C14,C82,C13,C10,C9,C28 EA 31 9 SMD C70,16,17 EA 3 10 C39 EA 1 11 SMD C83,C84 EA 2 12 SMD C67,C68,C69 EA 3 13 SMD C86 EA 1 14 SMD C104 EA 1 15 SMD C27,C40,C8,C53,C54,C58,C59,C60,C61, C55,C56,C15,C94,C96,C87 EA 0 16 DIP C106,107 EA 2 17 DIP C57 EA 1 - 18 DIP C109,110,111,112 EA 0 - 19 DIP TC8,TC9,TC3,TC10,TC6,TC12 EA 6 20 DIP TC13 EA 1 Rev Data PRO. Name ADSL 모뎀 Component Name DOC. Name DOC. NO. 202ER (Annex-A) #REF! Item Code Chip CapacitorChip CapacitorChip CapacitorChip Capacitor Film Capacitor 680pF,5%,50V,NPO,0805 1.5nF,5%,50V,film,0805 0.01uF,5%,50V,film,0805 0.01uF,10%,50V,NPO,0603 전해 CAPACITOR Chip CapacitorChip CapacitorChip Capacitor CERAMIC CAP Chip Capacitor Chip Capacitor CERAMIC CAP CERAMIC CAP 전해 CAPACITOR 10uF , 25V, 20%, DIP B O M L I S T Film CapacitorFilm Capacitor Chip CapacitorChip Capacitor Change History List 10uF,10%,50V,X5R,121022uF,10%,50V,X5R,1210 DNE 150pF, 1.5KV, 20% 20pF,5%,50V,NPO,060327pF,5%,50V,NPO,0603 0.027uF,5%,50V,film,1210 0.1uF,10%,50V,NPO,06030.1uF,10%,50V,NPO,0805 1uF,10%,50V,NPO,06031uF,10%,50V,NPO,0805 10nF, 2KV, 20% DNE 22uF , 25V, 20%, DIP NOTE C C Chip Capacitor 0.22uF,10%,50V,NPO,0603 Net-RD-014(Rev.0) 네투스테크놀로지(주) 2/7 DRWN CHKD APRD Sheet 2003-07-28 Rev. Code 1.0 순번 SHOP Design Name Unit Q'ty Maker Rev Data PRO. Name ADSL 모뎀 Component Name DOC. Name DOC. NO. 202ER (Annex-A) #REF! Item Code B O M L I S T Change History List NOTE 21 DIP TC11,4,1 EA 3 22 DIP TC2 EA 1 23 DIP TC5 EA 1 24 DIP TC7 EA 0 - 25 DIP C105 EA 1 26 DIP C108 EA 1 27 DIP RV1, 3 EA 2 AVX 28 SMD D9 EA 1 ACM 29 SMD U14 EA 0 ACM 30 SMD R6,R127 EA 2 31 SMD R5 EA 0 32 SMD R86,R92,R94,R96,L12 EA 5 33 SMD R34,R29,R20,R36,R40, R79 EA 6 34 SMD R100,R103,R104,R106 EA 4 35 SMD R88,R90 EA 2 36 SMD R80,R82,R108,R112 EA 4 37 SMD R41,R30,R19,R24R58,R59,R60,R61,R68,R69,R74,R75 EA 4 38 SMD R64,R65,R66,R67 EA 4 39 SMD R45 EA 1 40 SMD R1 EA 1 41 SMD R2 EA 1 42 SMD R12,R13,R14,R15,R16,R17,R18 EA 7 43 SMD R98 EA 1 DNE Chip Resister 전해 CAPACITOR전해 CAPACITOR전해 CAPACITOR Chip Resister VIRISTOR JUMPER RESISTOR 333J, BMM, 400VDC,0.033uF, 5% 47uF , 25V, 20%, DIP Chip Resister 75R0F-T, 75R, 1%, 1/16W, 0603 1000F-T, 100R, 1%, 1/16W, 0603 Chip ResisterChip Resister 2430F-T, 243R, 1%, 1/16W, 0603 1070F-T, 107R, 1%, 1/16W, 0603 Chip Resister 3320F-T, 332R, 1%, 1/16W, 0603 4020J-T, 402R, 5%, 0805 Chip ResisterChip ResisterChip Resister GAS Tube Chip Resister JUMPER RESISTOR POLYESTER CAPACITORPOLYESTER CAPACITOR Chip ResisterChip Resister GAS Tube 49R9F-T, 49.9R, 1%, 0805 223J, BMM, 400VDC,0.022uF, 5% VF07M10471K 49R9F-T, 49.9R,1%, 1/16W, 0603 SL1002A350SM 0Ω, 1206 0RF-T, 0R, 1%, 0603 5R6J-T, 5.6R, 1%, 0805 34R8F-T, 34.8R, 1%, 0805 470uF, 16V, 20% 2200uF, 16V, 20% 0RJ-T, 0R, 1%, 0805 CCC DNE C 전해 CAPACITOR DNE A Net-RD-014(Rev.0) 네투스테크놀로지(주) 3/7 DRWN CHKD APRD Sheet 2003-07-28 Rev. Code 1.0 순번 SHOP Design Name Unit Q'ty Maker Rev Data PRO. Name ADSL 모뎀 Component Name DOC. Name DOC. NO. 202ER (Annex-A) #REF! Item Code B O M L I S T Change History List NOTE 44 SMD R63 EA 1 45 SMD R39 EA 1 46 SMD R47,R48,R49,R56,R57,R53,R54,R52 EA 8 47 SMD R62 EA 1 48 SMD R31,R32,R42,R43,R44,R46,R22,R23,R25,R28 EA 9 49 SMD R76 EA 1 50 SMD R37 EA 1 51 SMD R38 EA 1 52 SMD R78 EA 1 53 SMD DNE EA 0 54 SMD R26 EA 1 55 SMD R33,R27 EA 2 56 SMD R21,R126,R70,R71,R72,R73,R3,R4,R7,R8, R9,R10,R11,R84,R110,R118,R114, R116, R120 EA 0 57 SMD RA5,11 EA 2 58 SMD RA3 EA 1 59 SMD RA4 EA 1 60 SMD L5,L8,L3 EA 3 61 SMD L9 EA 1 62 SMD L1,2,6,10 EA 4 63 SMD L11 EA 0 64 SMD T2 EA 1 SUMIDA / HYPHI EP13- SMD4:2:1 700uH / HP1317 Chip Resister 3321F-T, 3.32KR,1%, 1/16W, 0603 1501F-T, 1.5KR, 1%, 1/16W, 06035101F-T, 5.1KR, 1%, 1/16W, 0603 Chip Resister 5901F-T, 5.9KR, 1%, 1/16W, 0603 1002F-T, 10KR, 1%, 1/16W, 0603 Chip ResisterChip Resister 1003F-T, 100KR, 1%, 1/16W, 0603 1004F-T, 1MR, 1%, 1/16W, 0603 Chip Resister Chip Resister Chip Resister 1500, 8P4R, 150R, 5%, 1206 Chip Resister DNE EBM2012A600, 100Mhz, 2A 100ohm/100Mhz 5101, 8P4R, 5.1KR, 5%, 1206 1002, 8P4R, 10KR, 5%, 1206 Option C MULTYLAYER CHIP BEAD CHIP BEAD MULTYLAYER CHIP BEAD Array Resister Chip Resister MULTYLAYER CHIP BEAD Chip ResisterChip Resister Array ResisterArray Resister Chip ResisterChip Resister 2432F-T, 24.3KR, 1%, 1/16W, 06033322F-T, 33.2KR, 1%, 1/16W, 0603 DNE Transfomer (H/P Filter) EBM2012A151, 2A DNE 4753F-T, 475KR, 1%, 1/16W, 0603 1002F-T, 10KR, 1%, 1/16W, 0805 Net-RD-014(Rev.0) 네투스테크놀로지(주) 4/7 DRWN CHKD APRD Sheet 2003-07-28 Rev. Code 1.0 순번 SHOP Design Name Unit Q'ty Maker Rev Data PRO. Name ADSL 모뎀 Component Name DOC. Name DOC. NO. 202ER (Annex-A) #REF! Item Code B O M L I S T Change History List NOTE 65 SMD T1 EA 1 HYPHI 67 SMD L11 EA 0 68 SMD PS1,3 EA 2 SERATECH 69 SMD PS4 EA 1 SERATECH 70 SMD D5,D6,D7,D8 EA 4 Motorola 71 DIP D1 EA 1 72 SMD ZD1 EA 0 73 SMD U11 EA 0 74 SMD D2 EA 1 PJ NIKO 76 SMD U2 EA 1 SEMTECH/NIKO 77 SMD Q1 EA 0 78 SMD U15 EA 1 79 SMD U9 EA 1 80 SMD LD1,2,3,4,5 EA 5 81 SMD LD6 EA 1 83 DIP Y10 EA 1 84 SMD U3 EA 1 GSV 85 SMD U8 EA 1 GSV Transfomer (L/P Filter) INDUCTOR U6 TVS Diode Rectifier DIODE FOURCOM/ HYPHI CRYSTAL HP1316 PR-MS-160-T 1 MMBT 3904 LIST-C155GEKT, Dual, G/Y HC-49/S, 17.28Mhz, 25ppm 25Mhz, 25ppm, ATU-49U, 17.28Mhz, 25ppm DUAL DIODE PR-MS-075-T MMBD7000LT1 SOT-23 A POLY SWITCHPOLY SWITCH 1N4001 DNE Option Zener Diode DNE Schottky Rectifier IC (DSP) IC (AFE) GS8120-174-008D GS3780-174-001Z LIST-C150GKT, Single Green A IRLML6401 EA 1 L1117, 3.3V, SOT-223 SMD Option 75 Regulator (3.3V)66 INDUCTOR SMD L4 EA 82 CRYSTAL LED Regulator (1.8V) Regulator LED MOS FET TRANSISTOR SC, EZ1117A,-ADJ SOT-223 DNE MBRS140 PJ1117, 3.3V, SOT-223 DIP X2 EA 1 DNE SD5845-103, 10…

Text truncated - open the document above for the full version.

DQ_V1.2 Circuit Diagram CLOSE BY PLACE SEQUENCING, PWR J.W.Hwang Netus MBRS140 FLASH PROGRAMMING V1.2(DS0307070) 2003 07 31 Technologies 0.01uF 0.01uFC33 45 C2 C23 0.01uF 0.01uF SO VCC 6 WPN 3 C340.01uF C24 11 CSN 7 GND 1 RDY_BSYN 2 RSTNSCK 1213 SI 14 C250.01uF 27 8 C40.01uF 2 1 136 0.01uFC31 C70.01uF C10.01uF 10uFTC8 12 0.01uFC22 0.01uFC20 0.01uF C210.01uF C35 C32 0.01uF C190.01uF C290.01uF C30.01uF C60.01uF C300.01uF D G S C360.01uF TC910uF 12 C50.01uF 2 31 C260.01uF DR_CLK Technologies V1.2(DS0307070) 2003 07 31 150pF J.W.Hwang 3 DQ_V1.2 Circuit Diagram PR-MS-110-T PR-MS-110-T 30 29 44 24 14 8 40 42 Netus R96 0/2012_1608 C112 U14 SMP-100LC-270 1 2 PS3 1 2 5.6/2012_1608 R103 49.9/2012_1608 R112 1 2 F 5.6/2012_1608 R104 0.1uFC71 R106 5.6/2012_1608 0.022uF/polycap C108 J3 RJ11 1 2 3 45 6 7 8 F 1 2 3 49.9/2012_1608 R80 150pFC110 C98 34.8/2012_1608 R90 C770.1uF PS1 12 0.027uF/3225/2012 10 6 15 C101 0.027uF/3225/2012 1 2 3 C111 150pF 0.1uFC80 1uFC83 C94 R88 34.8/2012_1608 12 22uFC104 402/2012_1608R98 0.082uF/3225/2012 0/2012_1608 R86 47uFTC11 1 2 3 R108 49.9/2012_1608 150pFC109 0.01uF/2012_1608 C88 R84 DNE/2012_1608 F R118 DNE/2012_1608 C92 680pF/2012_1608 R100 DNE/2012_1608 R110 1 2 3 0.1uFC85 0.1uFC78 5.6/2012_1608 DNE/2012_1608 0/2012_1608 R94 1uFC84 1500pF/2012_1608 C102 R116 11 14 16 23 45 67 8 9 C790.1uF R92 0/2012_1608 DNE/2012_1608 R114 1 C760.1uF 0.082uF/3225/2012 C96 0R120 J.W.Hwang Netus Technologies V1.2(DS0307070) 2003 07 31 DQ_V1.2 Circuit Diagram DEBUG PORT OPTION 36 C64 0.1uFC65 0.1uF F C57 0.01uF/2KV F 45 36 27 36 18 27 F 3.3VD_DSP 1845 12 27 F 18 45 RESET_N PR-MS-110-T V1.2(DS0307070) Netus DQ_V1.2 Circuit Diagram 2003 07 31 J.W.Hwang 1N4OO1 USB +5V GND Technologies 2 1 12 12 12 12 12 21 1 GND 4 OUT 2 VCC 3 VIN 12 ADJ 1 3 IN 2 OUT TAB 4 2 1 2 1 F 3 12 POWER_JACK J1 1 2 1 ADJ 1 3 IN 2 OUT TAB 4 12 2 324561 1 23 4 F 2 1 USB_DATA_NUSB_DATA_P CONST_CK

E E M M C C T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0308 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 12 of 12 8.PHOTOGRAPHS Conducted emission ( Front ) Conducted emission ( Rear ) E E M M C C T T E E S S T T R R E E P P O O R R T T Report reference No: KST-FCC0308 KOSTEC Co.,Ltd. 180-254,Annyung-Ri, Taean-Yup, Hwasung-shi, Kyunggi-do, Korea Tel : +82-31-222-4251 Fax: +82-31-222-4252 http://www.kosteclab.com Page : 13 of 13 Radiated Emission ( Front ) Radiated Emission ( Rear )