PX9M101QRugged Tablet PC

Date: 19 March 2026 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii) (KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) Winmate Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The software to be loaded prior to marketing of the equipment identified below is not "covered" software manufactured by any entity including predecessors, successors, parents, subsidiaries, or affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the "Covered List" DA 24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Winmate Inc. (“the applicant”) further certifies that no Cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software is installed in the equipment being certified. Section 2.911(d)(5)(ii) Winmate Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Type of Equipment subject to FCC Certification: FCC ID: PX9M101Q If you have any questions, please feel free to contact me Contact Person: Lindon Lin Position in the Company: Winmate Inc. Date of Signature: ___________________________ Signatory (signature of the applicant)

Date: March 19, 2026 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The Winmate Inc., the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen BALUN Technology Co., Ltd., to act on the behalf of the Winmate Inc. solely in matters relating to the application for an FCC equipment authorization for FCC ID: PX9M101Q including the signing of documents in connection with this Application. Necessary acts carried out by Shenzhen BALUN Technology Co., Ltd. in connection with the Application shall have the same effect as acts of the Winmate Inc. The Winmate Inc. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. Section 862. Yours Sincerely, Print name: Lindon Lin Title: Manager Signature:

Date: March 19, 2026 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 RE: FCC ID: PX9M101Q FCC Certification Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. Winmate Inc. requests that the following documents regarding this submission for FCC ID: PX9- G900ADbe kept Long-Term confidential: Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Schematics.pdf Operational Description Operational Description.pdf And below exhibit kept short-term confidential (180 days): Exhibit Type File Name External Photos External Photo.pdf Internal Photos Internal Photo.pdf Test Setup Photos Test Setup Photos.pdf Users Manuals Users Manual.pdf Those documents contain detailed system and equipment description and related information about the product which Winmate Inc. considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, Winmate Inc. considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Thank you for your attention to this matter. Print name: Lindon Lin Title: Manager Signature:

Modeldifferencedeclaration components. Differenceinbelow， 1.Allmodelsaresamewithelectricalparametersandinternalcircuitstructure,butonly differinmodelname We( Winmate Inc.) Hereby declare that the following products: Product Name: Rugged Tablet PC Model:M101Q9 Model:M101Q9-LA,M101Q9-LE,M101Q9-BH,M101Q9-HP,M101Q9-SC . Thisdeclarationisissuedto:ShanghaiTejetCommunicationsTechnologyCo.,Ltd., Ltd.Personresponsibleformakingthisstatement. Signature:

Report No.: Ti-CC26010331-701 Tel: 86-21-58180736 E-mail: [email protected] Page No. 1 / 39 Web: www.titcgroup.com Template No.: TRP7-EC-05 V2.0 Add: 1-2/F., Building 1, No.222, Xuanlan Road, Xuanqiao, Pudong New District, Shanghai, China TEST REPORT Applicant: Winmate Inc. Address: 9F,No.111-6, Shing-De Rd., San-Chung District, New Taipei City Taiwan Equipment Type: Rugged Tablet PC Model Name: M101Q9 (Refer to section 2.3) Brand Name: Winmate FCC ID: PX9M101Q Test Standard: FCC 47 CFR Part 2.1093 (refer section 3.1) Maximum SAR: Body (1g @ 0mm): 0.35 W/kg Sample Arrival Date: Mar. 03, 2026 Test Date: Mar. 11, 2026 Date of Issue: Mar. 24, 2026 ISSUED BY: Shanghai Tejet Communications Technology Co., Ltd. Testing Center Prepared by: Huang Xiaoqin Reviewed by: Cai Xueguo Approved by: Zhang Yanqing (Laboratory Manager) _______________ _______________ _______________ Report No.: Ti-CC26010331-701 Tel: 86-21-58180736 E-mail: [email protected] Page No. 2 / 39 Web: www.titcgroup.com Template No.: TRP7-EC-05 V2.0 Add: 1-2/F., Building 1, No.222, Xuanlan Road, Xuanqiao, Pudong New District, Shanghai, China Revision History Version Issue Date Revisions Content Rev. 01 Mar. 24, 2026 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ....................................................................................................... 4 1.1 Test Laboratory .......................................................................................................... 4 1.2 Test Location .............................................................................................................. 4 1.3 Test Environment Condition ...................................................................................... 4 2 PRODUCT INFORMATION ....................................................................................................... 5 2.1 Applicant Information ................................................................................................. 5 2.2 Manufacturer Information .......................................................................................... 5 2.3 General Description for Equipment under Test (EUT) ............................................. 5 2.4 Ancillary Equipment ................................................................................................... 5 2.5 Technical Information ................................................................................................ 6 3 SUMMARY OF TEST RESULT ................................................................................................. 7 3.1 Test Standards ............................................................................................................ 7 3.2 Device Category and SAR Limit ................................................................................ 8 3.3 Test Result Summary ................................................................................................. 9 3.4 Test Uncertainty ....................................................................................................... 10 4 MEASUREMENT SYSTEM ..................................................................................................... 13 4.1 Specific Absorption Rate (SAR) Definition ............................................................. 13 4.2 DASY SAR System ................................................................................................... 14 5 SYSTEM VERIFICATION ........................................................................................................ 21 5.1 Purpose of System Check ........................................................................................ 21 5.2 System Check Setup ................................................................................................ 21 6 TEST POSITION CONFIGURATIONS .................................................................................... 22 6.1 Body-worn Position Conditions .............................................................................. 22 6.2 Hotspot Mode Exposure Position Conditions ........................................................ 23 Report No.: Ti-CC26010331-701 Tel: 86-21-58180736 E-mail: [email protected] Page No. 3 / 39 Web: www.titcgroup.com Template No.: TRP7-EC-05 V2.0 Add: 1-2/F., Building 1, No.222, Xuanlan Road, Xuanqiao, Pudong New District, Shanghai, China 6.3 Product Specific 10g Exposure Consideration ...................................................... 23 7 MEASUREMENT PROCEDURE ............................................................................................. 24 7.1 Measurement Process Diagram............................................................................... 24 7.2 SAR Scan General Requirement .............................................................................. 25 7.3 Measurement Procedure .......................................................................................... 26 7.4 Area & Zoom Scan Procedure ................................................................................. 26 8 CONDUCTED RF OUPUT POWER ........................................................................................ 27 8.1 Bluetooth ................................................................................................................... 27 8.2 WIFI ............................................................................................................................ 29 9 Antenna Location .................................................................................................................. 31 10 TEST RESULT ........................................................................................................................ 32 10.1 Bluetooth ................................................................................................................... 32 10.2 WIFI 2.4GHz ..........................................................................................…

Text truncated - open the document above for the full version.

Report No.: Ti-CC26010331-AC 1 / 32 CALIBRATION REPORT F.1 E-Field Probe (EX3DV4 - SN:3748) Report No.: Ti-CC26010331-AC 2 / 32 Report No.: Ti-CC26010331-AC 3 / 32 Report No.: Ti-CC26010331-AC 4 / 32 Report No.: Ti-CC26010331-AC 5 / 32 Report No.: Ti-CC26010331-AC 6 / 32 Report No.: Ti-CC26010331-AC 7 / 32 Report No.: Ti-CC26010331-AC 8 / 32 Report No.: Ti-CC26010331-AC 9 / 32 Report No.: Ti-CC26010331-AC 10 / 32 Report No.: Ti-CC26010331-AC 11 / 32 Report No.: Ti-CC26010331-AC 12 / 32 Report No.: Ti-CC26010331-AC 13 / 32 Report No.: Ti-CC26010331-AC 14 / 32 Report No.: Ti-CC26010331-AC 15 / 32 Report No.: Ti-CC26010331-AC 16 / 32 Report No.: Ti-CC26010331-AC 17 / 32 Report No.: Ti-CC26010331-AC 18 / 32 Report No.: Ti-CC26010331-AC 19 / 32 Report No.: Ti-CC26010331-AC 20 / 32 Report No.: Ti-CC26010331-AC 21 / 32 Report No.: Ti-CC26010331-AC 22 / 32 Report No.: Ti-CC26010331-AC 23 / 32 F.2 Data Acquisition Electronics (DAE4 - SN:540) Report No.: Ti-CC26010331-AC 24 / 32 Report No.: Ti-CC26010331-AC 25 / 32 Report No.: Ti-CC26010331-AC 26 / 32 F.3 2450 MHz Dipole Report No.: Ti-CC26010331-AC 27 / 32 Report No.: Ti-CC26010331-AC 28 / 32 Report No.: Ti-CC26010331-AC 29 / 32 Report No.: Ti-CC26010331-AC 30 / 32 Report No.: Ti-CC26010331-AC 31 / 32 Report No.: Ti-CC26010331-AC 32 / 32 D2450V2 Dipole impedance and return loss Validation Meas. Results Current Meas. Previous Meas. Max. Deviation Meas. Data 2025.09.02 2024.09.05 / Return Loss(dB) -25.168 -27.362 -8.02% Impedance 46.046 Ω – 0.531 jΩ 48.091 Ω + 3.748 jΩ -4.279Ω (Imaginary part) --BLANK BELOW--

ReportNo.:Ti-CC26010331-ATD 1 / 5 Meas1.BodyLeftside0mmBTCh78Ant.MAIN Date:2026/3/11 CommunicationSystemBand:Bluetooth;Frequency:2480MHz;DutyCycle:1:1.31 Mediumparametersused:f=2480MHz;σ=1.875S/m;ε r =38.777;ρ=1000kg/m 3 Phantomsection:FlatSection AmbientTemperature:22.4°CLiquidTemperature:21.3°C DASY5Configuration: Probe:EX3DV4-SN3748;ConvF(6.9,6.9,6.9);Calibrated:2025/4/24 Sensor-Surface:1.4mm(MechanicalSurfaceDetection) Electronics:DAE4Sn540;Calibrated:2025/4/21 Phantom:Twin-SAMRightV5.0(20degprobetilt);Type:QD000P40CD;Serial:1857 MeasurementSW:DASY52,Version52.10(4);SEMCADXVersion14.6.14(7501) Ch78/AreaScan(61x171x1):Interpolatedgrid:dx=1.200mm,dy=1.200mm MaximumvalueofSAR(interpolated)=0.390W/kg Ch78/ZoomScan(7x7x7)/Cube0:Measurementgrid:dx=5mm,dy=5mm,dz=5mm ReferenceValue=2.646V/m;PowerDrift=-0.03dB PeakSAR(extrapolated)=0.520W/kg SAR(1g)=0.120W/kg;SAR(10g)=0.065W/kg Smallestdistancefrompeakstoallpoints3dBbelow=8.1mm RatioofSARatM2toSARatM1=54.6% MaximumvalueofSAR(measured)=0.434W/kg 0dB=0.434W/kg ReportNo.:Ti-CC26010331-ATD 2 / 5 Meas2.BodyRightside0mmBTCh39Ant.AUX Date:2026/3/11 CommunicationSystemBand:Bluetooth;Frequency:2441MHz;DutyCycle:1:1.31 Mediumparametersused:f=2441MHz;σ=1.851S/m;ε r =38.752;ρ=1000kg/m 3 Phantomsection:FlatSection AmbientTemperature:22.4 °C LiquidTemperature:21.3 °C DASY5Configuration: Probe:EX3DV4-SN3748;ConvF(6.9,6.9,6.9);Calibrated:2025/4/24 Sensor-Surface:1.4mm(MechanicalSurfaceDetection) Electronics:DAE4Sn540;Calibrated:2025/4/21 Phantom:Twin-SAMRightV5.0(20degprobetilt);Type:QD000P40CD;Serial:1857 MeasurementSW:DASY52,Version52.10(4);SEMCADXVersion14.6.14(7501) Ch39/AreaScan(51x161x1):Interpolatedgrid:dx=1.200mm,dy=1.200mm MaximumvalueofSAR(interpolated)=0.388W/kg Ch39/ZoomScan(7x7x7)/Cube0:Measurementgrid:dx=5mm,dy=5mm,dz=5mm ReferenceValue=3.151V/m;PowerDrift=0.07dB PeakSAR(extrapolated)=0.453W/kg SAR(1g)=0.213W/kg;SAR(10g)=0.093W/kg Smallestdistancefrompeakstoallpoints3dBbelow=7.8mm RatioofSARatM2toSARatM1=51% MaximumvalueofSAR(measured)=0.361W/kg 0dB=0.361W/kg ReportNo.:Ti-CC26010331-ATD 3 / 5 Meas3.BodyLeftside0mmWLAN2.4GCh1Ant.MAIN Date:2026/3/11 CommunicationSystemBand:WLAN(g);Frequency:2412MHz;DutyCycle:1:1.01 Mediumparametersused:f=2412MHz;σ=1.813S/m;ε r =38.722;ρ=1000kg/m 3 Phantomsection:FlatSection AmbientTemperature:22.4 °C LiquidTemperature:21.3 °C DASY5Configuration: Probe:EX3DV4-SN3748;ConvF(6.9,6.9,6.9);Calibrated:2025/4/24 Sensor-Surface:1.4mm(MechanicalSurfaceDetection) Electronics:DAE4Sn540;Calibrated:2025/4/21 Phantom:Twin-SAMRightV5.0(20degprobetilt);Type:QD000P40CD;Serial:1857 MeasurementSW:DASY52,Version52.10(4);SEMCADXVersion14.6.14(7501) Ch1/AreaScan(51x161x1):Interpolatedgrid:dx=1.200mm,dy=1.200mm MaximumvalueofSAR(interpolated)=0.113W/kg Ch1/ZoomScan(7x7x7)/Cube0:Measurementgrid:dx=5mm,dy=5mm,dz=5mm ReferenceValue=0.4620V/m;PowerDrift=0.16dB PeakSAR(extrapolated)=0.158W/kg SAR(1g)=0.032W/kg;SAR(10g)=0.019W/kg Smallestdistancefrompeakstoallpoints3dBbelow=7.6mm RatioofSARatM2toSARatM1=45.8% MaximumvalueofSAR(measured)=0.084W/kg 0dB=0.084W/kg ReportNo.:Ti-CC26010331-ATD 4 / 5 Meas4.BodyRightside0mmWLAN2.4GCh1Ant.AUX Date:2026/3/11 CommunicationSystemBand:WLAN(g);Frequency:2412MHz;DutyCycle:1:1.01 Mediumparametersused:f=2412MHz;σ=1.813S/m;ε r =38.722;ρ=1000kg/m 3 Phantomsection:FlatSection AmbientTemperature:22.4 °C LiquidTemperature:21.3 °C DASY5Configuration: Probe:EX3DV4-SN3748;ConvF(6.9,6.9,6.9);Calibrated:2025/4/24 Sensor-Surface:1.4mm(MechanicalSurfaceDetection) Electronics:DAE4Sn540;Calibrated:2025/4/21 Phantom:Twin-SAMRightV5.0(20degprobetilt);Type:QD000P40CD;Serial:1857 MeasurementSW:DASY52,Version52.10(4);SEMCADXVersion14.6.14(7501) Ch1/AreaScan(51x161x1):Interpolatedgrid:dx=1.200mm,dy=1.200mm MaximumvalueofSAR(interpolated)=0.0991W/kg Ch1/ZoomScan(7x7x7)/Cube0:Measurementgrid:dx=5mm,dy=5mm,dz=5mm ReferenceValue=0V/m;PowerDrift=0.03dB PeakSAR(extrapolated)=0.131W/kg SAR(1g)=0.052W/kg;SAR(10g)=0.022W/kg Smallestdistancefrompeakstoallpoints3dBbelow=6mm RatioofSARatM2toSARatM1=41.3% MaximumvalueofSAR(measured)=0.0982W/kg 0dB=0.0982W/kg ReportNo.:Ti-CC26010331-ATD 5 / 5 Meas5.BodyRightside0mmWLAN2.4GCh1Ant.MIMO Date:2026/3/11 CommunicationSystemBand:WLAN(g);Frequency:2412MHz;DutyCycle:1:1.01 Mediumparametersused:f=2412MHz;σ=1.813S/m;ε r =38.722;ρ=1000kg/m 3 Phantomsection:FlatSection AmbientTemperature:22.4 °C LiquidTemperature:21.3 °C DASY5Configuration: Probe:EX3DV4-SN3748;ConvF(6.9,6.9,6.9);Calibrated:2025/4/24 Sensor-Surface:1.4mm(MechanicalSurfaceDetection) Electronics:DAE4Sn540;Calibrated:2025/4/21 Phantom:Twin-SAMRightV5.0(20degprobetilt);Type:QD000P40CD;Serial:1857 MeasurementSW:DASY52,Version52.10(4);SEMCADXVersion14.6.14(7501) Ch1/AreaScan(51x161x1):Interpolatedgrid:dx=1.200mm,dy=1.200mm MaximumvalueofSAR(interpolated)=0.0891W/kg Ch1/ZoomScan(7x7x7)/Cube0:Measurementgrid:dx=5mm,dy=5mm,dz=5mm ReferenceValue=0V/m;PowerDrift=0.05dB PeakSAR(extrapolated)=0.125W/kg SAR(1g)=0.050W/kg;SAR(10g)=0.021W/kg Smallestdistancefrompeakstoallpoints3dBbelow=9mm RatioofSARatM2toSARatM1=42.7% MaximumvalueofSAR(measured)=0.0906W/kg 0dB=0.0906W/kg

InternalSpecification - 1 – WinmateInc. AntennaSpecification Project:M101Q9 Version:20260204 IssueDate:2026/02/04 InternalSpecification - 2 – Contents 1.ANTENNAPLACEMENT...................................................................................................................................................3 2.WI-FIMAINANTENNASPECIFICATION......................................................................................................................4 2.1.ELECTRICALCHARACTERISTICS..................................................................................................................................4 2.2.MECHANICALCHARACTERISTICS................................................................................................................................4 2.3.ENVIRONMENTALCHARACTERISTICS........................................................................................................................4 2.4.RFPERFORMANCECHARACTERISTICS......................................................................................................................5 2.4.1.SWR........................................................................................................................................................................................5 2.4.2.RETURNLOSS.....................................................................................................................................................................6 2.4.3.GAIN/EFFICIENCY...........................................................................................................................................................7 2.5.DRAWING................................................................................................................................................................................8 3.WIFIAUXANTENNASPECIFICATION..........................................................................................................................9 3.1.ELECTRICALCHARACTERISTICS..................................................................................................................................9 3.2.MECHANICALCHARACTERISTICS................................................................................................................................9 3.3.ENVIRONMENTALCHARACTERISTICS........................................................................................................................9 3.4.RFPERFORMANCECHARACTERISTICS....................................................................................................................10 3.4.1SWR.......................................................................................................................................................................................10 3.4.2RETURNLOSS....................................................................................................................................................................11 3.4.3.GAIN/EFFICIENCY.........................................................................................................................................................12 3.5.DRAWING..............................................................................................................................................................................13 InternalSpecification - 3 – 1.AntennaPlacement InternalSpecification - 4 – 2.Wi-FiMainAntennaSpecification WinmatePartNumber:90RF09000021 2.1.ElectricalCharacteristics Frequency(MHz):2400-2500 SWR:≤1.62@2400-2500MHz ReturnLoss:≤-13.1dB@2400-2500MHz PeakGain:2.29dBi@2400-2500MHz Impedance:50ohm Polarization:Linear 2.2.MechanicalCharacteristics Cable:50Ωφ0.81RFcable Connector:MHF4 PCB:FPCB/Thickness0.2mm Type:PIFA 2.3.EnvironmentalCharacteristics OperatingTemperature:-30 °C to80 °C InternalSpecification - 5 – 2.4.RFPerformanceCharacteristics 2.4.1.SWR InternalSpecification - 6 – 2.4.2.ReturnLoss InternalSpecification - 7 – 2.4.3.Gain/Efficiency Frequency2400245024842500 Directivity(dBi) 5.115.115.305.47 Efficiency(dB) -2.82-3.12-3.18-3.23 Efficiency(%) 52.2748.7548.1047.50 PeakGain(dBi) 2.291.992.132.24 InternalSpecification - 8 – 2.5.Drawing AntennaLayoutDrawing RFcableDrawing AntennaAssembly InternalSpecification - 9 – 3.WiFiAuxAntennaSpecification WinmatePartNumber:90RF0600002D 3.1.ElectricalCharacteristics Frequency(MHz):2400-2500SWR:≤2.02@2400-2500MHz ReturnLoss:≤-9.47dB@2400-2500MHz PeakGain:1.14dBi@2400-2500MHz Impedance:50ohm Polarization:Linear 3.2.MechanicalCharacteristics Cable:50Ωφ0.81RFcable Connector:MHF4 PCB:FPCB/Thickness0.2mm Type:Monopole 3.3.EnvironmentalCharacteristics OperatingTemperature:-30 °C to80 °C InternalSpecification - 10 – 3.4.RFPerformanceCharacteristics 3.4.1SWR InternalSpecification - 11 – 3.4.2ReturnLoss InternalSpecification - 12 – 3.4.3.Gain/Efficiency Frequency2400245024842500 Directivity(dBi) 4.725.546.076.01 Efficiency(dB) -5.12-5.09-4.92-5.11 Efficiency(%) 30.7930.9532.1930.80 PeakGain(dBi) -0.390.441.140.89 InternalSpecification - 13 – 3.5.Drawing AntennaDrawing RFCableDrawing AntennaAssembly

Report No.: Ti-CC26010331-602 Tel: 86-21-58180736 E-mail: [email protected] Page No. 1 / 84 Web: www.titcgroup.com Template No.: TRP6-EC-08 V3.0 Add: 1st to 2nd floors, Building 1, No. 222 Xuanlan Road, Xuanqiao Town, Pudong New District, Shanghai TEST REPORT Applicant: Winmate Inc. Address: 9F,No.111-6, Shing-De Rd., San-Chung District, New Taipei City Taiwan Equipment Type: Rugged Tablet PC Model Name: M101Q9(refer to section 2.3) Brand Name: Winmate FCC ID: PX9M101Q Test Standard: 47 CFR Part 15 Subpart C (refer to section 3.1) Sample Arrival Date: Mar. 02, 2026 Test Date： Mar. 04, 2026 - Mar. 17, 2026 Date of Issue: Mar. 25, 2026 ISSUED BY: Shanghai Tejet Communications Technology Co., Ltd. Testing Center Tested by: Zhang Rujie Checked by: Hai Su Approved by: Zhang Yanqing (Laboratory Manager) _______________ _______________ ______________ Report No.: Ti-CC26010331-602 Tel: 86-21-58180736 E-mail: [email protected] Page No. 2 / 84 Web: www.titcgroup.com Template No.: TRP6-EC-08 V3.0 Add: 1st to 2nd floors, Building 1, No. 222 Xuanlan Road, Xuanqiao Town, Pudong New District, Shanghai Revision History Version Issue Date Revisions Rev. 01 Mar. 25, 2026 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 4 1.1 Test Laboratory ............................................................................................................ 4 1.2 Test Location ................................................................................................................ 4 2 PRODUCT INFORMATION ....................................................................................................... 5 2.1 Applicant Information .................................................................................................... 5 2.2 Manufacturer Information .............................................................................................. 5 2.3 General Description for Equipment under Test (EUT) ................................................... 5 2.4 Technical Information ................................................................................................... 6 3 SUMMARY OF TEST RESULTS ............................................................................................... 8 3.1 Test Standards ............................................................................................................. 8 3.2 Test Verdict .................................................................................................................. 9 4 GENERAL TEST CONFIGURATIONS .................................................................................... 10 4.1 Test Environments ...................................................................................................... 10 4.2 Test Equipment List .................................................................................................... 10 4.3 Test Software List ....................................................................................................... 10 4.4 Measurement Uncertainty ........................................................................................... 11 4.5 Decision Rule ............................................................................................................. 12 4.6 Description of Test Setup ........................................................................................... 12 4.7 Measurement Results Explanation Example ............................................................... 15 5 TEST ITEMS ........................................................................................................................... 16 5.1 Antenna Requirements ............................................................................................... 16 5.2 Frequency Hopping Systems ...................................................................................... 17 5.3 Number of Hopping Frequencies ................................................................................ 19 5.4 Peak Output Power .................................................................................................... 20 5.5 Occupied Bandwidth ................................................................................................... 21 Report No.: Ti-CC26010331-602 Tel: 86-21-58180736 E-mail: [email protected] Page No. 3 / 84 Web: www.titcgroup.com Template No.: TRP6-EC-08 V3.0 Add: 1st to 2nd floors, Building 1, No. 222 Xuanlan Road, Xuanqiao Town, Pudong New District, Shanghai 5.6 Carrier Frequency Separation ..................................................................................... 22 5.7 Time of Occupancy (Dwell time) ................................................................................. 23 5.8 Conducted Spurious Emission & Authorized-band band-edge .................................... 25 5.9 Conducted Emission ................................................................................................... 26 5.10 Radiated Spurious Emission ....................................................................................... 27 5.11 Band Edge (Restricted-band band-edge) .................................................................... 29 ANNEX A TEST RESULT ........................................................................................................... 30 A.1 Number of Hopping frequencies ................................................................................. 30 A.2 Peak Output Power .................................................................................................... 32 A.3 Occupied Bandwidth ................................................................................................... 37 A.4 Carrier Frequency Separation ..................................................................................... 42 A.5 Time of Occupancy (Dwell time) ..............................…

Text truncated - open the document above for the full version.

Report No.: Ti-CC26010331-602 Tel: 86-21-58180736 E-mail: [email protected] Page No. 46 / 84 Web: www.titcgroup.com Template No.: TRP6-EC-08 V3.0 Add: 1st to 2nd floors, Building 1, No. 222 Xuanlan Road, Xuanqiao Town, Pudong New District, Shanghai 8-DPSK DH5 AFH Mode DH1 AFH Mode DH3 AFH Mode DH5 Report No.: Ti-CC26010331-602 Tel: 86-21-58180736 E-mail: [email protected] Page No. 47 / 84 Web: www.titcgroup.com Template No.: TRP6-EC-08 V3.0 Add: 1st to 2nd floors, Building 1, No. 222 Xuanlan Road, Xuanqiao Town, Pudong New District, Shanghai Aux. Antenna Test Plots GFSK DH1 GFSK DH3 GFSK DH5 8-DPSK DH1 8-DPSK DH3 Report No.: Ti-CC26010331-602 Tel: 86-21-58180736 E-mail: [email protected] Page No. 48 / 84 Web: www.titcgroup.com Template No.: TRP6-EC-08 V3.0 Add: 1st to 2nd floors, Building 1, No. 222 Xuanlan Road, Xuanqiao Town, Pudong New District, Shanghai 8-DPSK DH5 AFH Mode DH1 AFH Mode DH3 AFH Mode DH5 Report No.: Ti-CC26010331-602 Tel: 86-21-58180736 E-mail: [email protected] Page No. 49 / 84 Web: www.titcgroup.com Template No.: TRP6-EC-08 V3.0 Add: 1st to 2nd floors, Building 1, No. 222 Xuanlan Road, Xuanqiao Town, Pudong New District, Shanghai A.6 Conducted Spurious Emissions & Authorized-band band-edge Test Data Main Antenna GFSK Channel Measured Max. Out of Band Emission (dBm) Limit (dBm) Verdict Carrier Level Calculated 20 dBc Limit Low -37.14 15.70 -4.30 Pass Middle -36.68 15.93 -4.07 Pass High -37.09 16.10 -3.90 Pass 8-DPSK Channel Measured Max. Out of Band Emission (dBm) Limit (dBm) Verdict Carrier Level Calculated 20 dBc Limit Low -36.73 14.29 -5.71 Pass Middle -37.57 14.11 -5.89 Pass High -…

Text truncated - open the document above for the full version.