PX9M133WK001Rugged Tablet PC

Please read the instructions carefully before using this product, and save this manual for future use. M133WK Series Ultra-Rugged Tablet Intel® Core™ i5-8265U (6M Cache, up to 3.90 GHz) Windows® 10 IoT Enterprise LTSC User Guide Document Part No.91521110105Q Version 1.0 1 13.3" Ultra-Rugged Tablet M133WK Series User Guide Contents CONTENTS ..............................................................................................................................................................1 CHAPTER 1: READ ME FIRST ....................................................................................................................................2 1.1 ADVISORY CONVENTIONS ...........................................................................................................................................2 1.2 SAFETY INFORMATION ...............................................................................................................................................3 1.3 HANDLING AND MAINTENANCE ...................................................................................................................................5 1.4 DECLARATION OF CONFORMITY (DOC) .........................................................................................................................6 1.5 ABOUT THIS USER MANUAL .......................................................................................................................................7 CHAPTER 2: GETTING STARTED ...............................................................................................................................8 2.1 UNPACKING ............................................................................................................................................................8 2.2 DESCRIPTION OF PARTS .............................................................................................................................................9 2.3 KEY FUNCTION FOR POST (BEFORE BOOT UP) ..............................................................................................................11 CHAPTER 3: FIRST-TIME OPERATION .................................................................................................................... 12 3.1 INSERTING BATTERY PACK ........................................................................................................................................12 3.2 CHARGE YOUR TABLET ............................................................................................................................................13 3.3 BATTERY COLD SWAP ..............................................................................................................................................13 3.4 ADJUSTING KICKSTAND POSITION ..............................................................................................................................14 3.5 TURNING ON AND OFF ............................................................................................................................................14 CHAPTER 4: SETTING UP WINDOWS FOR THE FIRST TIME .................................................................................... 15 4.1 INTRODUCTION ......................................................................................................................................................15 4.2 SETTING UP WINDOWS 10 IOT ENTERPRISE ................................................................................................................15 CHAPTER 5: OPERATING THE DEVICE .................................................................................................................... 18 5.1 HOTTAB INTRODUCTION ..........................................................................................................................................18 5.2 USING PHYSICAL MEMBRANE KEYS ............................................................................................................................19 5.3 USING THE WIRELESS LAN (WI-FI) ...........................................................................................................................20 5.4 USING THE BLUETOOTH FEATURE ...............................................................................................................................20 5.5 TURNING ON/OFF THE LED INDICATORS ......................................................................................................................21 CHAPTER 6: FREQUENTLY USED SETTINGS ............................................................................................................ 22 6.1 SCREEN RESOLUTION SCALING AND SETTING ................................................................................................................22 6.2 ACCESSING THE DEVICE INFORMATION (HOTTAB SETTING).............................................................................................25 6.3 USING RECOVERY WIZARD TO RESTORE COMPUTER ......................................................................................................26 6.4 PAIRING WITH A WIRELESS BLUETOOTH DEVICE ...........................................................................................................28 CHAPTER 7: BIOS SETUP ....................................................................................................................................... 34 7.1 HOW AND WHEN TO USE BIOS SETUP .......................................................................................................................34 7.2 BIOS FUNCTIONS ...................................................................................................................................................36 APPENDIX ............................................................................................................................................................. 41 APPENDIX A: HARDWARE SPECIFICATIONS ..............…

Text truncated - open the document above for the full version.

FCC Software Configuration Control Declaration Rev1.1 Winmate Inc. FCC Software Configuration Control Declaration Date: 2020-05-13 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: Winmate Inc. Product Name: Rugged Tablet PC Model Number(s): M133WK, M133WK-DW, M133XXXXXXXXXXX(Where X can be A-Z,a-z ,0-9, “-”, Blank or Slash) Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Chini Liao Date: 2020-05-13 Title: R&D Manager Signatureof applicant

Winmate Inc. Agent Authorization Company: Winmate Inc. Address: 9F, No.111-6, Shing-De Rd., San-Chung Dist., New Taipei City, 24158, Taiwan, R.O.C Product Name: Rugged Tablet PC Model Number(s): M133WK, M133WK-DW, M133XXXXXXXXXXX(Where X can be A-Z,a-z ,0-9, “-”, Blank or Slash) Product Description: Rugged Tablet PC We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2020-05-13 Name: Chini Liao Title: R&D Manager Company: Winmate Inc.

Winmate Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-05-13 Subject; Request for Confidentiality FCC ID: PX9M133WK001 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Tune-up Procedure SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Winmate Inc. Title: R&D Manager

Page 1 of 5 Report No.: STS2002171 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: M133WK Photo 1 Photo 2 Page 2 of 5 Report No.: STS2002171 Photo 3 Photo 4 Page 3 of 5 Report No.: STS2002171 Photo 5 Photo 6 Page 4 of 5 Report No.: STS2002171 Photo 7 Photo 8 Page 5 of 5 Report No.: STS2002171 Photo 9 Photo 10

FCC&IC Label Sticker: 4 * 6 cm

Page 1 of 12 Report No.: STS2002171 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: M133WK Photo 1 Photo 2 WIFI Main Antenna A (Realtek) WIFI Main Antenna B(Intel) WIFI Aux Antenna B(Realtek) BT/WIFI Aux Antenna A(Intel) Page 2 of 12 Report No.: STS2002171 Photo 3 Photo 4 Page 3 of 12 Report No.: STS2002171 Photo 5 Photo 6 Page 4 of 12 Report No.: STS2002171 Photo 7 Photo 8 Page 5 of 12 Report No.: STS2002171 Photo 9 Photo 10 Page 6 of 12 Report No.: STS2002171 Photo 11 Photo 12 Page 7 of 12 Report No.: STS2002171 Photo 13 Photo 14 Page 8 of 12 Report No.: STS2002171 Photo 15 Photo 16 Page 9 of 12 Report No.: STS2002171 Photo 17 Photo 18 Page 10 of 12 Report No.: STS2002171 Photo 19 Photo 20 Page 11 of 12 Report No.: STS2002171 Photo 21 Photo 22 Page 12 of 12 Report No.: STS2002171 Photo 23 Photo 24

Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from STS, All Test Data Presented in this report is only applicable to presented Test sample. ShenZhen STS Test Services Co.,Ltd. A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China TEL: +86-755 3688 6288 FAX: +86-755 3688 6277 E-mail:[email protected] S T L A B S Testing Engineer : (Aaron Bu) Technical Manager : (Jason Lu) Authorized Signatory : (Vita Li) SAR Dipole Performance Measurement Report EUT Type： SAR Validation Dipole and Waveguide Model Name： DIP 2G450-335, WAG32 Brand Name: SATIMO Test Conclusion： Pass Test Date： 16 Aug. 2019 Date of Issue： 17 Aug. 2019 ISSUED BY Shenzhen STS Test Services Co., Ltd. 1. Equipment List Kind of Equipment Manufacturer Type No. Serial No. Last Calibration Calibrated Until PC Acer N/A N/A N/A N/A E-Field Probe MVG SSE5 SN 14/16 EP309 2018.12.13 2019.12.12 Dielectric Probe Kit MVG SCLMP SN 32/14 OCPG67 2018.12.01 2019.11.30 Phantom1 MVG SAM SN 32/14 SAM115 N/A N/A Phantom2 MVG SAM SN 32/14 SAM116 N/A N/A Attenuator Agilent 99899 DC-18GHz N/A N/A Directional coupler Narda 4226-20 3305 N/A N/A Network Analyzer Agilent 8753ES US38432810 2019.03.02 2020.03.01 Multi Meter Keithley Multi Meter 2000 4050073 2018.10.13 2019.10.12 Signal Generator Agilent N5182A MY50140530 2018.10.16 2019.10.15 Power Amplifier DESAY ZHL-42W 9638 2018.10.13 2019.10.12 Power Meter R&S NRP 100510 2018.10.26 2019.10.25 Power Sensor R&S NRP-Z11 101919 2018.10.13 2019.10.12 Power Sensor Agilent E9301A MY41497725 2018.10.13 2019.10.12 hygrothermograph MiEO HH660 N/A 2018.10.11 2019.10.10 Thermograph Elitech RC-4 S/N EF7176501537 2018.10.15 2019.10.14 ISSUED BY Shenzhen STS Test Services Co., Ltd. 2.<Justification of the extended calibration> Referring to KDB 865664 D01, if dipoles are verified in return loss<-20dB, (within 20% of prior calibration),and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. Body 2450 MHz Date of Measurement Return Loss (dB) Delta (%) Impedance Delta(ohm) 2017.08.15 -32.75 - 48.8 - 2018.08.16 -31.06 -5.16 45.61 -3.19 2019.08.16 -30.52 -1.74 46.33 0.72 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. <Dipole Verification Data> Body 2450 MHz ISSUED BY Shenzhen STS Test Services Co., Ltd. Body 5000 MHz Date of Measurement Return Loss (dB) Delta (%) Impedance Delta(ohm) 2017.08.15 < -13.94 - - - 2018.08.16 -14.41 - - - 2019.08.16 -14.61 - - - The return loss is <-8dB, within 20% of prior calibration; Therefore the verification result should support extended calibration. <Dipole Verification Data> Body 5000MHz

Ref : ACR.345.3.19.SATU.A SHENZHEN STS TEST SERVICES CO., LTD. 1/F, BUILDING 2, ZHUOKE SCIENCE PARK, CHONGQING ROAD FUYONG, BAO’ AN DISTRICT, SHENZHEN,CHINA MVG COMOSAR DOSIMETRIC E-FIELD PROBE SERIAL NO.: SN 41/18 EPGO334 Calibrated at MVG US 2105 Barrett Park Dr. - Kennesaw, GA 30144 Calibration Date: 06/04/2019 Summary: This document presents the method and results from an accredited COMOSAR Dosimetric E-Field Probe calibration performed in MVG USA using the CALISAR / CALIBAIR test bench, for use with a COMOSAR system only. All calibration results are traceable to national metrology institutions. COMOSAR E-Field Probe Calibration Report COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.345.3.19.SATU.A Page: 2/10 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. Name Function Date Signature Prepared by : Jérôme LUC Product Manager 12/11/2019 Checked by : Jérôme LUC Product Manager 12/11/2019 Approved by : Kim RUTKOWSKI Quality Manager 12/11/2019 Customer Name Distribution : Shenzhen STS Test Services Co., Ltd. Issue Date Modifications A 12/11/2019 Initial release COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.345.3.19.SATU.A Page: 3/10 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. TABLE OF CONTENTS 1 Device Under Test ..................................................................................................... 4 2 Product Description ................................................................................................... 4 2.1 General Information _______________________________________________________ 4 3 Measurement Method ................................................................................................ 4 3.1 Linearity ________________________________________________________________ 4 3.2 Sensitivity _______________________________________________________________ 5 3.3 Lower Detection Limit _____________________________________________________ 5 3.4 Isotropy _________________________________________________________________ 5 3.5 Boundary Effect __________________________________________________________ 5 4 Measurement Uncertainty .......................................................................................... 5 5 Calibration Measurement Results .............................................................................. 6 5.1 Sensitivity in air __________________________________________________________ 6 5.2 Linearity ________________________________________________________________ 7 5.3 Sensitivity in liquid ________________________________________________________ 7 5.4 Isotropy _________________________________________________________________ 8 6 List of Equipment .................................................................................................... 10 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.345.3.19.SATU.A Page: 4/10 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 1 DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE2 Serial Number SN 41/18 EPGO334 Product Condition (new / used) New Frequency Range of Probe 0.45 GHz-6GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.191 M Dipole 2: R2=0.216 M Dipole 3: R3=0.197 M A yearly calibration interval is recommended. 2 PRODUCT DESCRIPTION 2.1 GENERAL INFORMATION MVG’s COMOSAR E field Probes are built in accordance to the IEEE 1528 and CEI/IEC 62209 standards. Figure 1 – MVG COMOSAR Dosimetric E field Dipole Probe Length 330 mm Length of Individual Dipoles 2 mm Maximum external diameter 8 mm Probe Tip External Diameter 2.5 mm Distance between dipoles / probe extremity 1 mm 3 MEASUREMENT METHOD The IEEE 1528 and CEI/IEC 62209 standards provide recommended practices for the probe calibrations, including the performance characteristics of interest and methods by which to assess their affect. All calibrations / measurements performed meet the fore mentioned standards. 3.1 LINEARITY The evaluation of the linearity was done in free space using the waveguide, performing a power sweep to cover the SAR range 0.01W/kg to 100W/kg. COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.345.3.19.SATU.A Page: 5/10 This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 3.2 SENSITIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards. 3.3 LOWER DETECTION LIMIT The lower detection limit was assessed using the same measurement set up as used for the linearity measurement. The required lower detection limit is 10 mW/kg. 3.4 ISOTROPY The axial isotropy was evaluated by exposing the probe to a reference wave from a standard dipole with the dipole mounted under the flat phantom in the test configuration suggested for system validations and checks. The probe was rotated along its main axis from 0 - 360 degrees in 15 degree steps. The hemispherical isotropy is determined by inserting the probe in a thin plastic box filled with tissue-equivalent liquid, with the plastic box illuminated with the fields from a half wave dipole. The…

Text truncated - open the document above for the full version.

Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from STS, All Test Data Presented in this report is only applicable to presented Test sample. ShenZhen STS Test Services Co.,Ltd. A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China TEL: +86-755 3688 6288 FAX: +86-755 3688 6277 E-mail:[email protected] FCC SAR TEST REPORT Report No.: STS2002171H01 Issued for Winmate Inc. 9F, No.111-6, Shing-De Rd., San-Chung Dist., New Taipei City, 24158, Taiwan, R.O.C Product Name: Rugged Tablet PC Brand Name: Winmate Model Name: M133WK Series Model: M133WK-DW, M133XXXXXXXXXXX (Where X can be A-Z,a-z ,0-9, “-”, Blank or Slash) FCC ID: PX9M133WK001 Test Standard: ANSI/IEEE Std. C95.1 FCC 47 CFR Part 2 ( 2.1093) IEEE 1528: 2013 Max. Report SAR (1g): Body:0.840 W/kg S T L A B S Page 2 of 80 Report No.: STS2002171H01 Test Report Certification Applicant’s name ................. : Winmate Inc. Address ................................. : 9F, No.111-6, Shing-De Rd., San-Chung Dist., New Taipei City, 24158, Taiwan, R.O.C Manufacture's Name ............ : Winmate Inc. Address ................................. : 9F, No.111-6, Shing-De Rd., San-Chung Dist., New Taipei City, 24158, Taiwan, R.O.C Product description Product name ........................ : Rugged Tablet PC Brand name ......................... : Winmate Model name ......................... : M133WK Series Model .......................... : M133WK-DW, M133XXXXXXXXXXX (Where X can be A-Z,a-z ,0-9, “-”, Blank or Slash) Standards ............................. : ANSI/IEEE Std. C95.1-1992 FCC 47 CFR Part 2 ( 2.1093) IEEE 1528: 2013 The device was tested by Shenzhen STS Test Services Co., Ltd. in accordance with the measurement methods and procedures specified in KDB 865664 The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Date of Test ........................................... : Date (s) of performance of tests ............. : 13 Apr. 2020~20 Apr. 2020 Date of Issue .......................................... : 21 Apr. 2020 Test Result.............................................. : Pass Testing Engineer : ( Aaron Bu) Technical Manager : (Jason Lu) Authorized Signatory : (Vita Li) Page 3 of 80 Report No.: STS2002171H01 Table of Contents 1.General Information 5 1.1 EUT Description 5 1.2 Test Environment 7 1.3 Test Factory 7 2. Test Standards and Limits 8 3. SAR Measurement System 9 3.1 Definition Of Specific Absorption Rate (SAR) 9 3.2 SAR System 9 4. Tissue Simulating Liquids 12 4.1 Simulating Liquids Parameter Check 12 5. SAR System Validation 14 5.1 Validation System 14 5.2 Validation Result 14 6. SAR Evaluation Procedures 15 7. EUT Antenna Location Sketch 16 7.1 SAR test exclusion consider table 17 8. EUT Test Position 20 8.1 Define Two Imaginary Lines On The Handset 20 9. Uncertainty 21 9.1 Measurement Uncertainty 21 9.2 System validation Uncertainty 22 10. Conducted Power Measurement 23 10.1 Test Result (Intel Module) 23 10.2 Test Result (Realtek Module) 27 11. EUT And Test Setup Photo 30 11.1 EUT Photo 30 11.2 Setup Photo 33 12. SAR Result Summary 35 12.1 Body SAR 35 12.2 repeated SAR measurement 40 13. Equipment List 44 Appendix A. System Validation Plots 45 Appendix B. SAR Test Plots 55 Appendix C. Probe Calibration And Dipole Calibration Report 80 Page 4 of 80 Report No.: STS2002171H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 21 Apr. 2020 STS2002171H01 ALL Initial Issue Note: Format version of the report -V01 Page 5 of 80 Report No.: STS2002171H01 1. General Information Environmental evaluation measurements of specific absorption rate (SAR) distributions in emulated human head and body tissues exposed to radio frequency (RF) radiation from wireless portable devices for compliance with the rules and regulations of the U.S. Federal Communications Commission (FCC). 1.1 EUT Description Product Name Rugged Tablet PC Brand Name Winmate Model Name M133WK Series Model M133WK-DW, M133XXXXXXXXXXX (Where X can be A-Z,a-z ,0-9, “-”, Blank or Slash) Model Difference Only for marketing purpose Battery Rated Voltage: 15.4V Charge Limit: 17.6V Capacity: 5900mAh Device Category Portable Product stage Production unit RF Exposure Environment General Population / Uncontrolled Hardware Version M133DA-100 Software Version 20.90.0 Frequency Range 2.4GHz WLAN IEEE 802.11b/g/n(HT20/40): 2412MHz to 2462MHz 5GHz WLAN IEEE 802.11a/n/ac (20MHz): 5180MHz to 5825MHz 5GHz WLAN IEEE 802.11n/ac (40MHz):5190MHz to 5795MHz 5GHz WLAN IEEE 802.11ac (80MHz): 5210MHz, 5290MHz, 5530MHz to 5610MHz, 5775MHz Bluetooth: 2402MHz to 2480MHz Max. Reported SAR(1g): (Limit:1.6W/kg) Intel Module Band Mode Body (W/kg) DTS 2.4G WLAN ANT A 0.210 DTS 2.4G WLAN ANT B 0.333 DTS 2.4G WLAN ANT A+B 0.271 NII 5.2G WLAN ANT A 0.816 NII 5.2G WLAN ANT B 0.227 NII 5.2G WLAN ANT A+B 0.582 NII 5.3G WLAN ANT A 0.652 NII 5.3G WLAN ANT B 0.516 NII 5.3G WLAN ANT A+B 0.685 NII 5.6G WLAN ANT A 0.766 NII 5.6G WLAN ANT B 0.286 NII 5.6G WLAN ANT A+B 0.840 NII 5.8G WLAN ANT A 0.663 NII 5.8G WLAN ANT B 0.437 NII 5.8G WLAN ANT A+B 0.465 DTS Bluetooth Note 0.167 Realtek Module DTS 2.4G WLAN 0.344 NII 5.2G WLAN 0.385 NII 5.3G WLAN 0.479 NII 5.6G WLAN 0.340 NII 5.8G WLAN 0.205 1-g Sum SAR 1.486 Page 6 of 80 Report No.: STS2002171H01 FCC Equipment Class Digital Transmission System (DTS) Unlicensed National Information Infrastructure TX (NII) Operating Mode: 802.11a(OFDM): BPSK,QPSK,16-QAM,64-QAM 802.11n(OFDM): BPSK,QPSK,16-QAM,64-QAM 802.11ac(OFDM): BPSK,QPSK,16-QAM,64-QAM,256-QAM Bluetooth: 5.0+EDR (GFSK +π/4DQPSK+8DPSK) BLE Antenna Specification: BT,WLAN: PIFA Antenna Hotspot Mode: Not Support DTM Mode: Not Support Note: 1. Bluetooth SAR was estimated 2. The EUT bat…

Text truncated - open the document above for the full version.

Page 1 of 20 Report No.: STS2002171W24 Conducted Spurious&Band edge WLAN_Band-1 WLAN_Band-1 W52_11a20_Lower_Conducted Spurious W52_11a20_Middle_Conducted Spurious W52_11a20_Higher_Conducted Spurious W52_11a20_Lower_Band edge W52_11a20_Higher_Band edge W52_11n20_Lower_Conducted Spurious Page 2 of 20 Report No.: STS2002171W24 WLAN_Band-1 WLAN_Band-1 W52_11n20_Middle_Conducted Spurious W52_11n20_Higher_Conducted Spurious W52_11n20_Lower_Band edge W52_11n20_Higher_Band edge W52_11n40_Lower_Conducted Spurious W52_11n40_Higher_Conducted Spurious Page 3 of 20 Report No.: STS2002171W24 WLAN_Band-1 WLAN_Band-1 W52_11n40_Lower_Band edge W52_11n40_Higher_Band edge W52_11ac20_Lower_Conducted Spurious W52_11ac20_Middle_Conducted Spurious W52_11ac20_Higher_Conducted Spurious W52_11ac20_Lower_Band edge Page 4 of 20 Report No.: STS2002171W24 WLAN_Band-1 WLAN_Band-1 W52_11ac20_Higher_Band edge W52_11ac40_Higher_Conducted Spurious W52_11ac40_Lower_Band edge W52_11ac40_Higher_Band edge W52_11ac80_CH42(5210MHz)_Conducted Spurious W52_11ac80_CH42(5210MHz)_Band edge_left Page 5 of 20 Report No.: STS2002171W24 WLAN_Band-1 WLAN_Band-1 W52_11ac80_CH42(5210MHz)_Band edge_Right Page 6 of 20 Report No.: STS2002171W24 WLAN_Band-2 WLAN_Band-2 W53_11a20_Lower_Conducted Spurious W53_11a20_Middle_Conducted Spurious W53_11a20_Higher_Conducted Spurious W53_11a20_Lower_Band edge W53_11a20_Higher_Band edge W53_11n20_Lower_Conducted Spurious Page 7 of 20 Report No.: STS2002171W24 WLAN_Band-2 WLAN_Band-2 W53_11n20_Middle_Conducted Spurious W53_11n20_Higher_Conducted Spurious W53_11n20_Lower_Band edge W53_11n20_Higher_Band edge W53_11n40_Lower_Conducted Spurious W53_11n40_Higher_Conducted Spurious Page 8 of 20 Report No.: STS2002171W24 WLAN_Band-2 WLAN_Band-2 W53_11n40_Lower_Band edge W53_11n40_Higher_Band edge W53_11ac20_Lower_Conducted Spurious W53_11ac20_Middle_Conducted Spurious W53_11ac20_Higher_Conducted Spurious W53_11ac20_Lower_Band edge Page 9 of 20 Report No.: STS2002171W24 WLAN_Band-2 WLAN_Band-2 W53_11ac20_Higher_Band edge W53_11ac40_Lower_Conducted Spurious W53_11ac40_Higher_Conducted Spurious W53_11ac40_Lower_Band edge W53_11ac40_Higher_Band edge W53_11ac80_CH58(5290MHz)_Conducted Spurious Page 10 of 20 Report No.: STS2002171W24 WLAN_Band-2 WLAN_Band-2 W53_11ac80_CH58(5290MHz)_Band edge_left W53_11ac80_CH58(5290MHz)_Band edge_Right Page 11 of 20 Report No.: STS2002171W24 WLAN_Band-3 WLAN_Band-3 W56_11a20_Lower_Conducted Spurious W56_11a20_Middle_Conducted Spurious W56_11a20_Higher_Conducted Spurious W56_11a20_Lower_Band edge W56_11a20_Higher_Band edge W56_11n20_Lower_Conducted Spurious Page 12 of 20 Report No.: STS2002171W24 WLAN_Band-3 WLAN_Band-3 W56_11n20_Middle_Conducted Spurious W56_11n20_Higher_Conducted Spurious W56_11n20_Lower_Band edge W56_11n20_Higher_Band edge W56_11n40_Lower_Conducted Spurious W56_11n40_Middle_Conducted Spurious Page 13 of 20 Report No.: STS2002171W24 WLAN_Band-3 WLAN_Band-3 W56_11n40_Higher_Conducted Spurious W56_11n40_Lower_Band edge W56_11n40_Higher_Band edge W56_11ac20_Lower_Conducted Spurious W56_11ac20_Middle_Conducted Spurious W56_11ac20_Higher_Conducted Spurious Page 14 of 20 Report No.: STS2002171W24 WLAN_Band-3 WLAN_Band-3 W56_11ac20_Lower_Band edge W56_11ac20_Higher_Band edge W56_11ac40_Lower_Conducted Spurious W56_11ac40_Middle_Conducted Spurious W56_11ac40_Higher_Conducted Spurious W56_11ac40_Lower_Band edge Page 15 of 20 Report No.: STS2002171W24 WLAN_Band-3 WLAN_Band-3 W56_11ac40_Higher_Band edge W56_11ac80_Lower_Conducted Spurious W56_11ac80_Higher_Conducted Spurious W56_11ac80_Lower_Band edge W56_11ac80_Higher_Band edge Page 16 of 20 Report No.: STS2002171W24 WLAN_Band-4 WLAN_Band-4 W58_11a20_Lower_Conducted Spurious W58_11a20_Middle_Conducted Spurious W58_11a20_Higher_Conducted Spurious W58_11a20_Lower_Band edge W58_11a20_Higher_Band edge W58_11n20_Lower_Conducted Spurious Page 17 of 20 Report No.: STS2002171W24 WLAN_Band-4 WLAN_Band-4 W58_11n20_Middle_Conducted Spurious W58_11n20_Higher_Conducted Spurious W58_11n20_Lower_Band edge W58_11n20_Higher_Band edge W58_11n40_Lower_Conducted Spurious W58_11n40_Higher_Conducted Spurious Page 18 of 20 Report No.: STS2002171W24 WLAN_Band-4 WLAN_Band-4 W58_11n40_Lower_Band edge W58_11n…

Text truncated - open the document above for the full version.