Q2O-N100WSMPWireless Streaming Music Player

NODE N100 Owner’s manual Bluesound International 2012 Bluesound International – A Division of Lenbrook Inc. 2 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS FOR LATER USE FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE AUDIO EQUIPMENT. 1. Read instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with dry cloth. 6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7. Water and Moisture - Do not use this product near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. 8. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. 9. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 10. Ventilation - Slots and openings in the cabinet are provided for ventilation an to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. 11. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. The primary method of isolating the amplifier from the mains supply is to disconnect the mains plug. Ensure that the mains plug remains accessible at all times. Unplug the AC power cord from the AC outlet if the unit will not be used for several months or more. The socket-outlet shall be installed near the equipment and shall be easily accessible. La prise du secteur est utilisé pour déconnecter le système. La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation. Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du secteur. Débrancher le cordon d’alimentation secteur de la prise murale si l’appareil ne doit pas être utilisé pendant une longue période de temps (plusieurs mois et plus). Le socle de prise de courant doit être installé àproximité du matériel et doit être aisément accessible. 12. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 3 IMPORTANT SAFETY INSTRUCTIONS 13. Power Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 14. Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built- up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. 15. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power line surges. 16. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 17. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 18. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. WARNING: THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING, AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THE APPARATUS. AS WITH ANY ELECTRONIC PRODUCTS, USE CARE NOT TO S…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model : NODE N100 (External) INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model : NODE N100 (External) INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model : NODE N100 (External)

Bluesound International 633 Granite Court, Pickering, ON Canada L1W 3K1 Model : NODE N100 WIRELESS STREAMING MUSIC PLAYER POWER RATING : 100-240V 50/60Hz 0.15A Letter size1mm Label 1 Label size30mm X 40mm Bluesound International is a division of Lenbrook Industries Limited. 2012Bluesound, All Rights Reserved THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003. CET APPAREIL NUMERIQUE DE LA CLASSE B EST CONFORMEA LA NORME NMB-003 DU CANADA The and aretrademarks of Bluesound International.All other trademarks are the property of their respective owners. Letter size 1.2mm T rad e name is BLUESOUNDLetter size 1mm Label 2 Label size 30mm X 40mm K22N100B00001 MAC Address Stick-On labelnumber ONLY SN Label Size : 30 x 10mmQTY : 4pcs (Unit, Gift Box, Shipping Box and 1 spare. Designed and Engineered in Canada, Custom Manufactured in China DC5V 500mA IC : 152B-N100WSMP FCC ID : Q2O-N100WSMP Letter size 1mm Label 4 Label size 30mm X 120mm

INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model: NODE N100 (Internal) INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model: NODE N100 (Internal) INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model: NODE N100 (Internal) INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model: NODE N100 (Internal) INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model: NODE N100 (Internal) INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model: NODE N100 (Internal) INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model: NODE N100 (Internal) INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model: NODE N100 (Internal) INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model: NODE N100 (Internal) INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model: NODE N100 (Internal) INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model: NODE N100 (Internal) INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model: NODE N100 (Internal) INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model: NODE N100 (Internal) INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model: NODE N100 (Internal) INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model: NODE N100 (Internal) INTERTEK TESTING SERVICE Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Equipment Photographs Model: NODE N100 (Internal)

INTERTEK TESTING SERVICES Report No.: HK12061673-1 Sample No.: 1/1 Code: FCC15C_f / Effective Date: 24 Jun 2011 ( of ) Bandwidth / Bandedge Plot – Pursuant to FCC Part 15 Section 15. 249 Requirement (Pass/Fail) 802.11b (DSSS, 11Mbps) Lower bandedge = 105.0 – 41.1 = 63.9 dBμV/m @3m < 74dBuV/m @3m (Peak spurious limit) Lower bandedge = 85.0 – 41.1 = 43.9 dBμV/m @3m < 54dBuV/m @3m (Average spurious limit) 802.11b (DSSS, 11Mbps) Upper bandedge = 108.0 – 55.2 = 52.8 dBμV/m @3m < 74dBuV/m @3m (Peak spurious limit) Upper bandedge = 88.1 – 55.2 = 32.9 dBμV/m @3m < 54dBuV/m @3m (Average spurious limit) INTERTEK TESTING SERVICES Report No.: HK12061673-1 Sample No.: 1/1 Code: FCC15C_f / Effective Date: 24 Jun 2011 ( of ) Bandwidth / Bandedge Plot – Pursuant to FCC Part 15 Section 15. 249 Requirement (Pass/Fail) 802.11g (OFDM, 54Mbps) Lower bandedge = 101.0 – 35.3 = 65.7 dBμV/m @3m < 74dBuV/m @3m (Peak spurious limit) Lower bandedge = 63.3 – 35.3 = 28.0 dBμV/m @3m < 54dBuV/m @3m (Average spurious limit) 802.11g (OFDM, 54Mbps) Upper bandedge = 104.0 – 33.4 = 70.6 dBμV/m @3m < 74dBuV/m @3m (Peak spurious limit) Upper bandedge = 65.3 – 33.4 = 31.9 dBμV/m @3m < 54dBuV/m @3m (Average spurious limit) INTERTEK TESTING SERVICES Report No.: HK12061673-1 Sample No.: 1/1 Code: FCC15C_f / Effective Date: 24 Jun 2011 ( of ) Bandwidth / Bandedge Plot – Pursuant to FCC Part 15 Section 15. 249 Requirement (Pass/Fail) 802.11n (OFDM, 65Mbps, 20MHz) Lower bandedge = 97.6 – 35.0 = 62.6 dBμV/m @3m < 74dBuV/m @3m (Peak spurious limit) Lower bandedge = 65.0 – 35.0 = 30.0 dBμV/m @3m < 54dBuV/m @3m (Average spurious limit) 802.11n (OFDM, 65Mbps, 20MHz) Upper bandedge = 102.0 – 38.0 = 64.0 dBμV/m @3m < 74dBuV/m @3m (Peak spurious limit) Upper bandedge = 70.0 – 38.0 = 32.0 dBμV/m @3m < 54dBuV/m @3m (Average spurious limit)

INTERTEK TESTING SERVICES Report No.: HK12061673-1 Sample No.: 1/1 Code: FCC15C_f / Effective Date: 24 Jun 2011 ( of ) EDIT PEAK LIST (Final Measurement Results) Trace1: CF15MQP Trace2: CF15MAV Trace3: --- TRACE FREQUENCY LEVEL dBμV DELTA LIMIT dB 1 Quasi Peak 154.5 kHz 47.61 N -18.14 1 Quasi Peak 240 kHz 41.26 L1 -20.83 1 Quasi Peak 294 kHz 38.12 L1 -22.29 1 Quasi Peak 1.9815 MHz 28.63 L1 -27.36 1 Quasi Peak 2.634 MHz 34.64 L1 -21.35 2 CISPR Average2.9535 MHz 27.13 N -18.86 1 Quasi Peak 3.084 MHz 34.94 L1 -21.05 2 CISPR Average3.21 MHz 28.26 N -17.73 1 Quasi Peak 4.875 MHz 32.67 L1 -23.32 2 CISPR Average4.893 MHz 25.81 N -20.18 2 CISPR Average7.971 MHz 36.03 N -13.96 1 Quasi Peak 7.9755 MHz 41.53 N -18.46 1 Quasi Peak 8.205 MHz 43.13 N -16.86 2 CISPR Average8.3715 MHz 38.09 N -11.90 1 Quasi Peak 15.1935 MHz 41.74 N -18.25 2 CISPR Average15.468 MHz 36.16 N -13.83 1 Quasi Peak 21.1155 MHz 48.29 L1 -11.70 2 CISPR Average21.534 MHz 42.96 N -7.04 1 Quasi Peak 23.1315 MHz 50.78 L1 -9.21 2 CISPR Average23.1315 MHz 45.31 L1 -4.69 150 kHz30 MHz 1 PK CLRWR 2 AV CLRWR SGL TDS 6DB dBμV dBμV AC RBW 9 kHz MT 1 s PREAMP OFFAtt 10 dB AUTO 1 MHz10 MHz 0 10 20 30 40 50 60 70 80 90 100 CF15MAV CF15MQP Conducted Plot – Pursuant to FCC Part 15 Requirement (Pass/Fail)

- The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com TEST REPORT Report No.: HK12061673-1 Lenbrook Industries Limited Application For Certification (Original Grant) (FCC ID: Q2O-N100WSMP) (IC: 152B-N100WSMP) Transceiver Prepared and Checked by: Approved by: Signed On File Wong Cheuk Ho, Herbert Engineer Wong Kwok Yeung, Kenneth Lead Engineer Date: October 22, 2012 INTERTEK TESTING SERVICES Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP i GENERAL INFORMATION Lenbrook Industries Limited BRAND NAME: Bluesound, MODEL: NODE N100 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Grantee: Lenbrook Industries Limited Grantee Address: Room D, 11 th Floor, Wing Cheong Commercial Building, 19-25 Jervois Street, Central, Hong Kong. Contact Person: Jes Arcenal Tel: 852-2517 8292 Fax: 852-2517 4404 e-mail: [email protected] Manufacturer: Dongguan Kwan Hong Electronics Co., Ltd. Manufacturer Address: KwanHong Building, Xiao Bian 2 nd Industrial Zone, ChangAn, DongGuan, China. Brand Name: Bluesound Model: NODE N100 Type of EUT: Transceiver Description of EUT: Wireless Streaming Music Player Serial Number: N/A FCC ID / IC: Q2O-N100WSMP / 152B-N100WSMP Date of Sample Submitted: June 29, 2012 Date of Test: August 24, 2012 Report No.: HK12061673-1 Report Date: October 22, 2012 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% INTERTEK TESTING SERVICES Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP ii SUMMARY OF TEST RESULT Lenbrook Industries Limited BRAND NAME: Bluesound, MODEL: NODE N100 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP TEST SPECIFICATION REFERENCE RESULTS Maximum Peak Output Power 15.247(b), (c) / RSS-210 A8.4 N/A Hopping Channel Carrier Frequencies Separation 15.247(e) / RSS-210 A8.1 N/A 20dB Bandwidth of the Hopping Channel 15.247(a) / RSS-210 A8.1 N/A Number of Hopping Frequencies 15.247(e) / RSS-210 A8.1 N/A Average Time of Occupancy of Hopping Frequency 15.247(e) / RSS-210 A8.1 N/A Antenna Conducted Spurious Emissions 15.247(d) / RSS-210 A8.5 N/A Radiated Spurious Emissions 15.247(d) / RSS-210 A8.5 N/A RF Exposure Compliance 15.247(i) / RSS-Gen 5.6 N/A Transmitter Power Line Conducted Emissions 15.207 / RSS-Gen 7.2.4 Pass Transmitter Field Strength 15.227 / RSS-310 3.8 N/A Transmitter Field Strength 15.229 / RSS-210 A2.7 N/A Transmitter Field Strength, Bandwidth and Timing Requirement 15.231(a) / RSS-210 A1.1.1 N/A Transmitter Field Strength, Bandwidth and Timing Requirement 15.231(e) / RSS-210 A1.1.5 N/A Transmitter Field Strength and Bandwidth Requirement 15.239 / RSS-210 A2.8 N/A Transmitter Field Strength and Bandwidth Requirement 15.249 / RSS-210 A2.9 Pass Transmitter Field Strength and Bandwidth Requirement 15.235 / RSS-310 3.9 N/A Receiver / Digital Device Radiated Emissions 15.109 / RSS-210 2.5 N/A Digital Device Conducted Emissions 15.107 / ICES-003 N/A Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. INTERTEK TESTING SERVICES Report No.: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP iii Table of Contents 1.0 General Description....................................................................................... 1 1.1 Product Description ...................................................................................... 1 1.2 Related Submittal(s) Grants .......................................................................... 2 1.3 Test Methodology ......................................................................................... 2 1.4 Test Facility .................................................................................................. 2 2.0 System Test Configuration ............................................................................ 2 2.1 Justification................................................................................................... 2 2.2 EUT Exercising Software .............................................................................. 2 2.3 Special Accessories...................................................................................... 3 2.4 Equipment Modification................................................................................. 3 2.5 Measurement Uncertainty ............................................................................. 3 2.6 Support Equipment List and Description.........................................…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICE Report No: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Configuration Photographs Worst-Case Radiated Emissions (Front View) Model: NODE N100 HK12061673-1 NODE N100 Side A INTERTEK TESTING SERVICE Report No: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP Configuration Photographs Worst-Case Radiated Emissions (Rear View) Model: NODE N100 HK12061673-1 NODE N100 Side B

INTERTEK TESTING SERVICE Report No: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP i Configuration Photographs Worst-Case Line-Conducted Emissions (Front View) Model: NODE N100 INTERTEK TESTING SERVICE Report No: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP ii Configuration Photographs Worst-Case Line-Conducted Emissions (Rear View) Model: NODE N100 INTERTEK TESTING SERVICE Report No: HK12061673-1 FCC ID: Q2O-N100WSMP IC: 152B-N100WSMP iii Configuration Photographs Worst-Case Line-Conducted Emissions (Side View) Model: NODE N100