Q6G-AP230WWireless Access Point

Covered list Attestation Statement To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046, USA Date:March 1, 2024 Subject:Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID:Q6G-AP230W WatchGuard Technologies, Inc.certifies that the equipment for which authorization is sought is not“covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, ----------------------------------- Jay Lindenauer/Vice President of Product Delivery Operations WatchGuard Technologies, Inc. Covered list Attestation Statement Date:March 1, 2024 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046, USA Subject:Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID:Q6G-AP230W WatchGuard Technologies, Inc.certifies that, as of the date of the filing of the application, the applicantis notidentified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, ----------------------------------- Jay Lindenauer/Vice President of Product Delivery Operations WatchGuard Technologies, Inc.

U.S. Agent Designation for Service of Process Date:March 1, 2024 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046, USA ATTENTION:FCC Certification–Section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketingand importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant: Company name:WatchGuard Technologies Grantee Code:Q6G FRN:0008960791 Address:255 S. King St. Suite 1100, Seattle, WA, United States 98104 Contact name:Jay Lindenauer Title:Vice President of Product Delivery Operations Telephone number:(206)876-8103 Email:[email protected] Signature:

Confidential Request Letter Date: January 29, 2024 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046, USA Subject: Request for confidentiality FCC ID: Q6G-AP230W Long-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Schematics Block Diagrams Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Short-Term Confidentiality (STC) Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Internal Photos User’s Manual External Photos Test Set-up Photos Justification: Due to market confidential, we ask for the short-term confidentiality. Planned Release Date STC: If no date is given, 180 days from grant date will be used. Sincerely, ------------------------------------------------------ Jay Lindenauer / Vice President of Product Delivery Operations WatchGuard Technologies, Inc.

Declaration of Authorization We Name: WatchGuard Technologies, Inc. Address: 255 S. King St. Suite 1100, City: Seattle State: Washington 98104 Country: United States Declare that: Name Representative of agent: Stanley Wu (1) Agent Company name: DEKRA Testing and Certification Co., Ltd. Address: No. 26, Huaya 1st Rd., Guishan Dist. City: Taoyuan City 33341 Country Taiwan is authorized to apply for FCC/ISED/JP Certification of the following product(s): Product description: Wireless Access Point FCC ID: Q6G-AP230W IC: 4657A-AP230W Model: AP230W Trademark: WatchGuard Validity/expiry date: Dec. 01, 2024 on our behalf. Date: January 29, 2024 City: Washington Name: Jay Lindenauer (2) Function: Vice President of Product Delivery Operations Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent

Report No.: 2380869R-RFUSV17S-A Page: 1 of 8 Test report No.: 2380869R-RFUSV17S-A RF Exposure Report Product Name Wireless Access Point Trademark WatchGuard Model and /or type reference AP230W FCC ID Q6G-AP230W Applicant ́s name / address WatchGuard Technologies, Inc. 255 S. King St. Suite 1100, Seattle, WA, United States 98104 Manufacturer ́s name WatchGuard Technologies, Inc. Test method requested, standard KDB 447498 D01 v06 Minimum test separation distance ≥ 20 cm For low power devices Verdict Summary IN COMPLIANCE Documented By (Senior Project Specialist / Ida Tung) Tested By (Senior Engineer / Jack Hsu) Approved By (Manager / Tim Sung) Date of Receipt 2023/08/29 Date of Issue 2024/03/05 Report Version V1.0 Report No.: 2380869R-RFUSV17S-A Page: 2 of 8 Competences and Guarantees DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. General conditions 1. The test results relate only to the samples tested. 2. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. 3. This report must not be used to claim product endorsement by TAF or any agency of the government. 4. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. 5. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for each testing system, but are based on the results of the compliance measurement. Report No.: 2380869R-RFUSV17S-A Page: 3 of 8 Revision History Report No. Version Description Issued Date 2380869R-RFUSV17S-A V1.0 Initial issue of report. 2024/03/05 Report No.: 2380869R-RFUSV17S-A Page: 4 of 8 1. General Information 1.1. EUT Description Product Name Wireless Access Point Trademark WatchGuard Model and /or type reference AP230W Note: For more detailed information please refer to report No.: 2380869R-RFNAV02S-C, 2380869R- RFNAV02S-D and 2380869R-RFUSV03S-A. Report No.: 2380869R-RFUSV17S-A Page: 5 of 8 2. Test Facility USA FCC Registration Number: TW0033 Site Description Accredited by TAF Accredited Number: 3023 Test Laboratory DEKRA Testing and Certification Co., Ltd. Linkou Laboratory Address No.5-22, Ruishukeng Linkou District, New Taipei City, 24451, Taiwan, R.O.C Performed Location No. 26, Huaya 1st Rd., Guishan Dist.,Taoyuan City 333411, Taiwan, R.O.C. Phone Number +886-3-275-7255 Fax Number +886-3-327-8031 Report No.: 2380869R-RFUSV17S-A Page: 6 of 8 3. RF Exposure Evaluation 3.1. Standard Applicable According to KDB 447498 D01 (7.1), A minimum test separation distance ≥ 20 cm is required between the antenna and radiating structures of the device and nearby persons to apply mobile device exposure limits. 3.2. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 0.3-3.0 614 1.63 *(100) 6 3.0-30 1842/f 4.89/f *(900/f2) 6 30-300 61.4 0.163 1.0 6 300-1,500 f/300 6 1,500-100,000 5 6 (B) Limits for General Population/ Uncontrolled Exposures 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f2) 30 30-300 27.5 0.073 0.2 30 300-1,500 f/1500 30 1,500-100,000 1.0 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneously transmitting antennas incorporated in a host device is ≤ 1.0 Report No.: 2380869R-RFUSV17S-A Page: 7 of 8 3.3. Test Result of RF Exposure Evaluation Product : Wireless Access Point Test Item : RF Exposure Evaluation Radio-1 Band conducted output power (dBm) Antenna Gain (dBi) E.I.R.P (dBm) E.I.R.P (mW) Power Density at R = 20 cm (mW/cm2) Limit (mW/cm2) 2.4 GHz 24.74 3.39 28.130 650.130 0.1293 1 Note: The conducted output power is refer to report No.: 2380869R-RFNAV02S-C from the DEKRA. Radio-2 Band conducted output power (dBm) Antenna Gain (dBi) E.I.R.P (dBm) E.I.R.P (mW) Power Density at R = 20 cm (mW/cm2) Limit (mW/cm2) 5 GHz (U-NII-1) 22.09 2.31 24.400 275.423 0.0548 1 5 GHz (U-NII-2A) 22.41 2.31 24.720 296.483 0.0590 1 5 GHz (U-NII-2C) 22.43 3.71 26.140 411.150 0.0818 1 5 GHz (U-NII-3) 22.40 3.77 26.170 414.000 0.0824 1 Note: The conducted output power is refer to report No.: 2380869R-RFNAV02S-D (U-NII-1 and U-NII-3) and 2380869R-RFUSV03S-A (U-NII-2A and U-NII-2C) from the DEKRA. Radio-3 …

Text truncated - open the document above for the full version.

AP230W Antenna Test Report CustomerWatchGuard ProjectAP230W Project Description 2.4/5G antenna *2 Scan antenna *1 Date2023/08/25 Prepared byKenny CheckedTony Report VersionA02 Wireless Access Point Executive Summary •Purpose Antenna verification for AP230Wdevice, result as following. •Agenda –Placement and Specification –S-Parameter& Isolation –Radiation Pattern –Combine Pattern –Efficiency and Gain Placement and specification Ant No.Operating BandGain (dBi)Efficiency (%)Ant TypeMaterial Feeding DL1 2400MHz ~ 2500 MHz 5150MHz ~ 5850 MHz 2.65~3.39 2.28~3.19 52.3~55.5 44.7~46.9 PIFAPCBCable DL2 2400MHz ~ 2500 MHz 5150MHz ~ 5850 MHz 1.59~2.99 2.31~3.77 50.5~52.3 42.7~43.3 PIFAPCBTrace Scan 2400MHz ~ 2500 MHz 5150MHz ~ 5850 MHz 2.65~3.94 1.31~3.40 41.8~46.0 28.6~31.3 MonopolePCBTrace Scan DL2 DL1 S11 Freq. (MHz)DL1DL2Scan 2400 -25.64 -10.11 -10.72 2450 -16.10 -11.75 -15.85 2500 -16.41 -18.78 -19.11 5150 -11.88 -17.95 -10.37 5500 -14.32 -14.32 -10.69 5850 -12.26 -19.65 -8.32 S-Parameter Isolation Isolation Freq. (MHz)DL1-DL2DL1-ScanDL2-Scan 2400 -15.46-24.29-18.36 2450 -16.20-27.63-19.54 2500 -17.16-40.45-20.79 5150 -36.99-33.55-19.42 5500 -24.28-37.95-16.88 5850 -24.57-39.12-20.11 2D Radiation Pattern –DL1 @ 2.45GHz Front side I/O port DL1 Top X Z Y Top I/O port LED Front side Top I/O port LED 2D Radiation Pattern –DL1 @ 5.55GHz DL1 X Z Y DL1 Front side Top I/O port LED Front side I/O portTopTop I/O port LED 2D Radiation Pattern –DL2 @ 2.45GHz DL2 X Z Y Front side Top I/O port LED Front side I/O portTopTop I/O port LED 2D Radiation Pattern –DL2 @ 5.55GHz DL2 X Z Y Front side Top I/O port LED Front side I/O portTopTop I/O port LED 2D Radiation Pattern –Scan @ 2.45GHz Scan X Z Y Front side Top I/O port LED 2D Radiation Pattern –Scan @ 5.55GHz Scan X Z Y Front side Top I/O port LED Front side I/O portTopTop I/O port LED Combine pattern –2G1+2G2 @2.45 GHz +Y +X +X +Z +Y +Z Front side Top I/O port LED Front side I/O portTop Top I/O port LED Combine pattern –5G1+5G2 @5.55 GHz +Y +X +X +Z +Y +Z Front side Top I/O port LED Top I/O port Front side LED I/O portTop Antenna Efficiency and Gain Antenna Performance Freq. (MHz) DL1DL2Scan Efficiency (%) Peak Gain (dBi) Efficiency (%) Peak Gain (dBi) Efficiency (%) Peak Gain (dBi) 240052.32.65 50.5 1.59 41.8 2.65 245055.52.88 50.6 2.07 46.0 3.94 250055.13.39 52.3 2.99 44.33.62 5150 44.72.28 42.7 2.31 29.8 1.31 550044.82.96 43.3 3.71 31.3 3.40 585046.93.19 42.7 3.77 28.6 1.37

Report No.: 2380869R-RFUSV19S-A Page: 1 of 76 Test report No.: 2380869R-RFUSV19S-A TEST REPORT Product Name Wireless Access Point Trademark WatchGuard Model and /or type reference AP230W FCC ID Q6G-AP230W Applicant ́s name / address WatchGuard Technologies, Inc. 255 S. King St. Suite 1100, Seattle, WA, United States 98104 Manufacturer ́s name WatchGuard Technologies, Inc. Test method requested, standard FCC CFR Title 47 Part 15 Subpart E 15.407 (h) KDB 905462 Verdict Summary IN COMPLIANCE Documented By (Senior Project Specialist / Ida Tung) Tested By (Senior Engineer / Benjamin Pan) Approved By (Senior Engineer / Jack Hsu) Date of Receipt 2023/08/29 Date of Issue 2024/03/05 Report Version V1.0 Report No.: 2380869R-RFUSV19S-A Page: 2 of 76 INDEX Page 1. General Information ..................................................................................................................... 6 1.1. Standard Requirement ............................................................................................................................. 6 1.2. EUT Description ...................................................................................................................................... 7 1.3. UNII Device Description ......................................................................................................................... 9 1.4. Test Facility ........................................................................................................................................... 10 1.5. Test Equipment ...................................................................................................................................... 11 1.6. Uncertainty ............................................................................................................................................ 12 1.7. Summary of Test Results ....................................................................................................................... 13 2. Test Setup ..................................................................................................................................... 14 2.1. DFS Detection Thresholds ..................................................................................................................... 14 2.2. Radar Test Waveforms ........................................................................................................................... 16 2.3. Radar Waveform Calibration ................................................................................................................. 19 2.4. Radar Waveform Calibration Result ...................................................................................................... 20 2.5. Master Data Traffic Plot Result ............................................................................................................. 36 3. UNII Detection Bandwidth ......................................................................................................... 39 3.1. Test Procedure ....................................................................................................................................... 39 3.2. Test Requirement ................................................................................................................................... 39 3.3. Test Result of UNII Detection Bandwidth ............................................................................................. 42 4. Initial Channel Availability Check Time .................................................................................. 48 4.1. Test Procedure ....................................................................................................................................... 48 4.2. Test Requirement ................................................................................................................................... 48 4.3. Test Result of Initial Channel Availability Check Time ........................................................................ 49 5. Radar Burst at the Beginning of the Channel Availability Check Time ................................ 50 5.1. Test Procedure ....................................................................................................................................... 50 5.2. Test Requirement ................................................................................................................................... 50 5.3. Test Result of Radar Burst at the Beginning of the Channel Availability Check Time ......................... 51 6. Radar Burst at the End of the Channel Availability Check Time .......................................... 52 6.1. Test Procedure ....................................................................................................................................... 52 6.2. Test Requirement ................................................................................................................................... 52 6.3. Test Result of Radar Burst at the End of the Channel Availability Check Time ................................... 53 7. In-Service Monitoring for Channel Move Time and Channel Closing Transmission Time and Non-Occupancy Period ................................................................................................................. 54 7.1. Test Procedure ....................................................................................................................................... 54 Report No.: 2380869R-RFUSV19S-A Page: 3 of 76 7.2. Test Requirement ................................................................................................................................... 54 7.3. Test Result of Channel Move Time and Channel Closing Transmission Time and Non-Occupancy Period 55 8. Statistical Performance Check ................................................................................................... 57 8.1. Te…

Text truncated - open the document above for the full version.

Report No.: 2380869R-R F N AV 0 2 S-D Page: 1 of 133 Test report No.: 2380869R-RFNAV02S-D TEST REPORT Product Name Wireless Access Point Trademark WatchGuard Model and /or type reference AP230W FCC ID Q6G-AP230W Applicant ́s name / address WatchGuard Technologies, Inc. 255 S. King St. Suite 1100, Seattle, WA, United States 98104 Manufacturer ́s name WatchGuard Technologies, Inc. Test method requested, standard FCC CFR Title 47 Part 15 Subpart E ANSI C63.4: 2014, ANSI C63.10: 2013 KDB Publication 789033 Verdict Summary IN COMPLIANCE Documented By (Senior Project Specialist / Ida Tung) Tested By (Senior Engineer / Ivan Chuang) Approved By (Senior Engineer / Jack Hsu) Date of Receipt 2023/08/18 Date of Issue 2024/03/11 Report Version V1.0 Report No.: 2380869R-R F N AV 0 2 S-D Page: 2 of 133 INDEX Page 1. General Information ........................................................................................................................ 6 1.1. EUT Description ...................................................................................................................................... 6 1.2. Tested System Datails .............................................................................................................................. 8 1.3. Configuration of tested System ............................................................................................................... 8 1.4. EUT Exercise Software ........................................................................................................................... 8 1.5. Test Facility ............................................................................................................................................. 9 1.6. List of Test Equipment ........................................................................................................................... 10 1.7. Uncertainty ............................................................................................................................................ 11 2. Conducted Emission ...................................................................................................................... 12 2.1. Test Setup .............................................................................................................................................. 12 2.2. Limits ..................................................................................................................................................... 12 2.3. Test Procedure ....................................................................................................................................... 12 2.4. Test Result of Conducted Emission ....................................................................................................... 13 3. Maximun conducted output power .............................................................................................. 14 3.1. Test Setup .............................................................................................................................................. 14 3.2. Limits ..................................................................................................................................................... 15 3.3. Test Procedure ....................................................................................................................................... 16 3.4. Test Result of Maximum conducted output power ................................................................................ 17 4. Peak Power Spectral Density ........................................................................................................ 25 4.1. Test Setup .............................................................................................................................................. 25 4.2. Limits ..................................................................................................................................................... 25 4.3. Test Procedure ....................................................................................................................................... 26 4.4. Test Result of Peak Power Spectral Density .......................................................................................... 27 5. Radiated Emission ......................................................................................................................... 43 5.1. Test Setup .............................................................................................................................................. 43 5.2. Limits ..................................................................................................................................................... 44 5.3. Test Procedure ....................................................................................................................................... 45 5.4. Test Result of Radiated Emission .......................................................................................................... 47 6. Band Edge ...................................................................................................................................... 68 6.1. Test Setup .............................................................................................................................................. 68 6.2. Limits ..................................................................................................................................................... 69 6.3. Test Procedure ....................................................................................................................................... 70 Report No.: 2380869R-R F N AV 0 2 S-D Page: 3 of 133 6.4. Test Result of Band Edge ...................................................................................................................... 71 7. 6 dB Bandwidth ............…

Text truncated - open the document above for the full version.

Report No.: 2380869R-R F N AV 0 2 S-D Page: 57 of 133 Radio-3 Report No.: 2380869R-R F N AV 0 2 S-D Page: 58 of 133 Report No.: 2380869R-R F N AV 0 2 S-D Page: 59 of 133 Report No.: 2380869R-R F N AV 0 2 S-D Page: 60 of 133 Report No.: 2380869R-R F N AV 0 2 S-D Page: 61 of 133 Report No.: 2380869R-R F N AV 0 2 S-D Page: 62 of 133 Report No.: 2380869R-R F N AV 0 2 S-D Page: 63 of 133 Report No.: 2380869R-R F N AV 0 2 S-D Page: 64 of 133 Report No.: 2380869R-R F N AV 0 2 S-D Page: 65 of 133 Report No.: 2380869R-R F N AV 0 2 S-D Page: 66 of 133 Report No.: 2380869R-R F N AV 0 2 S-D Page: 67 of 133 Co-location Report No.: 2380869R-R F N AV 0 2 S-D Page: 68 of 133 6. Band Edge 6.1. Test Setup RF Conducted Measurement: RF Radiated Measurement: SMA Connector EUT Spectrum Analyzer RF Cable RF absorber material on the ground plane. EUT The height of broadband or Dipole Antenna was scanned from 1M to 4M. The distance between antenna and turn table was 3M regards to the standard adopted. 3m 150cm To Receiver Pre- Amplifier Report No.: 2380869R-R F N AV 0 2 S-D Page: 69 of 133 6.2. Limits The provisions of Section 15.205 of this part apply to intentional radiators operating under this section. Radiated emissions which fall in the restricted bands, as defined in Section 15.205, must also comply with the radiated emission limits specified in Section 15.209: FCC Part 15 Subpart C Paragraph 15.209 Limits Frequency MHz μV/m @3m dBμV/m@3m 30-88 100 40 88-216 150 43.5 216-960 200 46 Above 960 500 54 Remarks : 1. RF Voltage (dBμV) = 20 log RF Voltage (μV) 2. In the Above Table, the tighter limit applies at the band edges. 3. Distance refers to the distance in meters between the measuring instrument antenna and the closed point of any part of the device or system.  For transmitters operating in the 5.15-5.25 GHz band: All emissions outside of the 5.15-5.35 GHz band shall not exceed an e.i.r.p. of −27 dBm/MHz.  For transmitters operating in the 5.25-5.35 GHz band: All emissions outside of the 5.15-5.35 GHz band shall not exceed an e.i.r.p. of −27 dBm/MHz.  For transmitters operating in the 5.47-5.725 GHz band: All emissions outside of the 5.47-5.725 GHz band shall not exceed an e.i.r.p. of −27 dBm/MHz.  For transmitters operating in the 5.725-5.85 GHz band: All emissions shall be limited to a level of −27 dBm/MHz at 75 MHz or more above or below the band edge increasing linearly to 10 dBm/MHz at 25 MHz above or below the band edge, and from 25 MHz above or below the band edge increasing linearly to a level of 15.6 dBm/MHz at 5 MHz above or below the band edge, and from 5 MHz above or below the band edge increasing linearly to a level of 27 dBm/MHz at the band edge.  For transmitters operating within the 5.925-7.125 GHz band: Any emissions outside of the 5.925-7.125 GHz band must not exceed an e.i.r.p. of −27 dBm/MHz. Based on ANSI C63.10-2013 Section 12.7.3 d) provides the conversion formula between field strength and EIRP, if distance is 3m, -27dBm is equivalent to 68.22dBuV/m. Report No.: 2380869R-R F N AV 0 2 S-D Page: 70 of 133 6.3. Test Procedure The EUT is placed on a turn table which is 1.5 meter above ground. The turn table can rotate 360 degrees to determine the position of the maximum emission level. The EUT was positioned such that the distance from antenna to the EUT was 3 meters. The antenna can move up and down between 1 meter and 4 meters to find out the maximum emission level. Both horizontal and vertical polarization of the antenna are set on measurement. In order to find the maximum emission, all of the interface cables must be manipulated according to ANSI C63.10:2013 on radiated measurement. The bandwidth below 1 GHz setting on the field strength meter is 120 kHz, above 1 GHz are 1 MHz. The EUT was setup to ANSI C63.10, 2013; tested to UNII test procedure of FCC KDB-789033 for compliance to FCC 47CFR Subpart E requirements. RBW and VBW Parameter setting: According to KDB 789033 section II.G.5 Procedure for Unwanted Maximum Emissions Measurements above 1000 MHz. RBW = 1 MHz. VBW ≥ 3 MHz. According to KDB 789033 section II.G.6 Procedures for Average Unwanted Emissions Measurements above 1000 MHz. RBW = 1 MHz. VBW = 10 Hz, when duty cycle ≥ 98 % VBW ≥ 1/T, when duty cycle < 98 % (T refers to the minimum transmission duration over which the transmitter is on and is transmitting at its maximum power control level for the tested mode of operation.) Radio-2 5 GHz band Duty Cycle (%) T (ms) 1/T (Hz) VBW (Hz) 802.11a 91.43 1.4400 694 1000 802.11ax-20 MHz 95.04 5.4600 183 200 802.11ax-40 MHz 95.54 5.4600 183 200 802.11ax-80 MHz 93.79 5.4400 184 200 Note: Duty Cycle Refer to Section 8. Radio-3 5 GHz band Duty Cycle (%) T (ms) 1/T (Hz) VBW (Hz) 802.11a 96.44 4.0600 246 300 802.11ac-20 MHz 96.19 3.7900 264 300 802.11ac-40 MHz 92.35 1.8700 535 1000 802.11ac-80 MHz 84.92 0.9120 1096 2000 Note: Duty Cycle Refer to Section 8. Report No.: 2380869R-R F N AV 0 2 S-D Page: 71 of 133 6.4. Test Result of Band Edge Radio-2 Report No.: 2380869R-R F …

Text truncated - open the document above for the full version.