Q6KAT140317AAsset Tracking and Alert Device

FCC ID: Q6KAT140317A IC ID: 5043A-AT140317A EXTERNAL PHOTOGRAPHS 1. Top side view of the radio product. FCC ID: Q6KAT140317A IC ID: 5043A-AT140317A 2. Bottom side view of the radio product.

FCC ID: Q6KAT140317A IC ID: 5043A-AT140317A LABEL INFORMATION The product label is located underneath the removable battery. This radio product is intended to be used in a controlled environment, i.e. by trained commercial customers only. It is not offered to the general public. Product compliance can be easily verified by removing the battery from the holder, as shown above. FCC ID: Q6KAT140317A IC ID: 5043A-AT140317A Magnified view of the FCC / IC CC ID: Q6KAT140317A AT140317A Magnified view of the FCC / IC compliance label.

1.250 ±0.020 1.000 ±0.020 R0.031 X4 EACH CORNER NOTES: PRODUCT SIZE: 1.125" X 1.000" WITH A VERTICAL REPEAT OF 1.000" AND A FINAL CARRIER WIDTH OF 1.250" COLOR: LABEL - WHITE PRINT - BLACK MATERIAL: BRADY B-422 THERMAL TRANSFER PRINTABLE GLOSSY WHITE POLYESTER LABEL STOCK OR EQUIVALENT W/PERM ACRYLIC ADHESIVE REFERENCE PART FILE FOR FONT SIZE BARCODE - 128 SUBSET C REVISIONS ZONEREV.DESCRIPTIONDATEAPPROVED AINITIAL DWG. RELEASE4/23/2014 D C B A A B C D 1 2 3 4 5 6 7 8 8 7 6 5 4 3 2 1 THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF 3SI SECURITY SYSTEMS. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF 3SI SECURITY SYSTEMS IS PROHIBITED. PROPRIETARY AND CONFIDENTIAL NEXT ASSY USED ON APPLICATION DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL ANGULAR: MACH BEND TWO PLACE DECIMAL THREE PLACE DECIMAL INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL FINISH DRAWN CHECKED ENG APPR. MFG APPR. Q.A. COMMENTS: DATE NAME 3SI SECURITY SYSTEMS TITLE: SIZE B DWG. NO. REV WEIGHT: SCALE: 2:1 UNLESS OTHERWISE SPECIFIED: A MGB 4/21/14 FCC/IC LABEL (3XG) SHEET 1 OF 1 112300000-000050-000 DO NOT SCALE DRAWING

FCC ID: Q6KAT140317A IC ID: 5043A-AT140317A INTERNAL PHOTOGRAPHS 1. Top side view of the radio product with the battery removed and shields taken off. FCC ID: Q6KAT140317A IC ID: 5043A-AT140317A 2. Close-up view of U5 module (data modem). FCC ID: Q6KAT140317A IC ID: 5043A-AT140317A 3. Close-up view of U9 module (GPS receiver).

Proj. nr: Rel.: TECHNICAL NOTE Date: 14.06.2012 Author: Filename:30378NT11098A_r5.doc Title: Power Tune up procedure for HE910 Products Family Page 1 of 5 5 0378 Code: 30378NT11098A MOD. 59 10/06 Rev.5 CONFIDENTIAL Documentazione riservata. Questo documento non può essere riprodotto, anche parzialmente, né reso noto a terzi senza preventi va autorizzazione scritta di Telit Communications S.p.A. Tutti i diritti sono tutelati a norma di legge. Restricted document. No part of this document ca n be reproduced or copied in any format, in part or totally, nor its contents revealed in any manner to others without the express written permission of Telit Communications S.p.A. All rights reserved. Title: Power Tune up procedure for HE910 Products Family 1 INTRODUCTION ............................................................................................................................................ 2 1.1 SCOPE ..................................................................................................................................................... 2 1.2 APPLICABILITY .......................................................................................................................................... 2 2 RF POWER STRUCTURE AND FUNCTION ................................................................................................. 2 2.1 WCDMA TX TUNE UP ............................................................................................................................. 2 2.1.1 High Gain Close Loop Power Detector (PD) Adjustment (WCDMA) ................................................. 3 2.1.2 PA Bias Characterization ................................................................................................................... 3 2.1.3 Linearity over Frequency ................................................................................................................... 3 2.1.4 Range of operating RF Power for WCDMA ....................................................................................... 4 2.2 GSM/EDGE TX TUNE UP ........................................................................................................................ 5 2.2.1 Range of operating RF Power for GSM/EDGE .................................................................................. 5 Proj. nr: Rel.: TECHNICAL NOTE Date: 14.06.2012 Author: Filename:30378NT11098A_r5.doc Title: Power Tune up procedure for HE910 Products Family Page 2 of 5 5 0378 Code: 30378NT11098A MOD. 59 10/06 Rev.5 CONFIDENTIAL Documentazione riservata. Questo documento non può essere riprodotto, anche parzialmente, né reso noto a terzi senza preventi va autorizzazione scritta di Telit Communications S.p.A. Tutti i diritti sono tutelati a norma di legge. Restricted document. No part of this document ca n be reproduced or copied in any format, in part or totally, nor its contents revealed in any manner to others without the express written permission of Telit Communications S.p.A. All rights reserved. 1 Introduction The aim of this document is the description of Tune Up Procedure for the HE910 Products family. This Technical Note is related to the following products: Product Supported 2G Bands Supported 3G bands HE910 GSM 850, GSM 900, DCS1800, PCS 1900 FDD B1, B2, B4, B5, B8 HE910-D GSM 850, GSM 900, DCS1800, PCS 1900 FDD B1, B2, B4, B5, B8 HE910-G1 GSM 850, GSM 900, DCS1800, PCS 1900 FDD B1, B2, B4, B5, B8 HE910-GA GSM 850, GSM 900, DCS1800, PCS 1900 FDD B1, B2, B5, B8 HE910-EUR GSM 850, GSM 900, DCS1800, PCS 1900 FDD B1, B5, B8 HE910-EUD GSM 850, GSM 900, DCS1800, PCS 1900 FDD B1, B5, B8 HE910-EUG GSM 850, GSM 900, DCS1800, PCS 1900 FDD B1, B5, B8 HE910-NAR GSM 850, GSM 900, DCS1800, PCS 1900 FDD B2, B4, B5 HE910-NAD GSM 850, GSM 900, DCS1800, PCS 1900 FDD B2, B4, B5 HE910-NAG GSM 850, GSM 900, DCS1800, PCS 1900 FDD B2, B4, B5 2 RF power structure and function The TX path consists of a Low gain open loop mode covering the TX output power range from -56 dBm till +14 dBm and a High gain close loop mode where a PA stage amplifies and cover the range from -1 till +25 dBm. In Low gain mode a variable PA Bias is added in order to reduce the current consumption and thereby optimize battery life. The total amount of adjustments can be divided into the following tasks: • High gain close loop Power Detector adjustment • Low gain open loop adjustment in both WCDMA and HSDPA • Bias characterization • Linearity over frequency on High Proj. nr: Rel.: TECHNICAL NOTE Date: 14.06.2012 Author: Filename:30378NT11098A_r5.doc Title: Power Tune up procedure for HE910 Products Family Page 3 of 5 5 0378 Code: 30378NT11098A MOD. 59 10/06 Rev.5 CONFIDENTIAL Documentazione riservata. Questo documento non può essere riprodotto, anche parzialmente, né reso noto a terzi senza preventi va autorizzazione scritta di Telit Communications S.p.A. Tutti i diritti sono tutelati a norma di legge. Restricted document. No part of this document ca n be reproduced or copied in any format, in part or totally, nor its contents revealed in any manner to others without the express written permission of Telit Communications S.p.A. All rights reserved. 2.1.1 High Gain Close Loop Power Detector (PD) Adjustment (WCDMA) The characterization of high gain close loop should be done from -1 to 25 dBm. This is done by issuing a list of TX DAC (pa_gain) values with a constant PA Bias level (pa_bias) and measure their corresponding TX output power and Power detector value. Then do a PD calculation based on the measured PD value and measured TX Power to find the exact TX PD value giving the exact integer output Power value and store the PD value. Procedure: 1. Setup target with Frequency, Band. 2. Setup TX gain with variable pa_gain and a constant pa_bias. 3. Fetch the close loop_gain Power Detector value reported by target 4. Measure the output power from target 5. Stop the TX on target 6. Repeat 1 → 5 until the range -1 till +25 is covered by increasing th…

Text truncated - open the document above for the full version.

RF Exposure Evaluation Report FOR: Manufacturer: 3SI Security Systems Model Name: AT140317US Product Description: Asset Tracking and Alert Device FCC ID: Q6KAT140317A IC ID: 5043A-AT140317A References: 1. FCC OET Bulletin 65 Supplement 2. FCC CFR Part 1 (1.1307 &1.1310), Part 2 (2.1091) 3. RSS-102- Radio Frequency Exposure Compliance of Radio communication Apparatus Issue 4 March 2010, Ch, 2.5 and Ch. 4 Test Report #: EMC_ ETHEO_018_14001_MPE FCC ID: Q6KAT140317A Date of Report : 2014-07-07 IC ID: 5043A-AT140317A May 15 2012. Rev 2.0 Page 2 of 14 TABLE OF CONTENTS 1 Assessment _____________________________________________________________ 3 2 Administrative Data ______________________________________________________ 4 2.1 Identification of the Testing Laboratory Issuing the Test Report _______________ 4 2.2 Identification of the Client _____________________________________________ 4 2.3 Identification of the Manufacturer _______________________________________ 4 3 Equipment under Test (EUT) _______________________________________________ 5 3.1 Specification of the Equipment under Test ________________________________ 5 4 RF Exposure Evaluation Requirements _______________________________________ 6 4.1 FCC: ______________________________________________________________ 6 4.2 IC: ________________________________________________________________ 6 5 Measurement procedure: __________________________________________________ 7 5.1 Radiated power measurement- ERP/EIRP- ________________________________ 7 5.2 Radiated power Calculation- ERP/EIRP- __________________________________ 8 5.3 Measurement Equipment information: ____________________________________ 8 5.4 Measurement Summary: _______________________________________________ 9 6 Revision History _______________________________________________________ 14 Test Report #: EMC_ ETHEO_018_14001_MPE FCC ID: Q6KAT140317A Date of Report : 2014-07-07 IC ID: 5043A-AT140317A May 15 2012. Rev 2.0 Page 3 of 14 1 Assessment This report serves as the Technical Information regarding RF Exposure evaluation of the below identified device according to the rules as stipulated in the documents listed under References above. The device meets the RF exposure limits, or - for some of it's radio functions / bands - the conditions for exemption from routine evaluation as defined in the referenced FCC and IC rule parts. Company Description Model # 3SI Security Systems Asset Tracking and Alert Device AT140317US Responsible for Testing Laboratory: 2014-07-07 Compliance Josie Sabado (Test Lab Manager) Singing on Behalf of Franz Engert (Compliance Manager Date Section Name Signature Responsible for the Report: 2014-07-07 Compliance James Donnellan (Sr Emc Engineer) Date Section Name Signature Test Report #: EMC_ ETHEO_018_14001_MPE FCC ID: Q6KAT140317A Date of Report : 2014-07-07 IC ID: 5043A-AT140317A May 15 2012. Rev 2.0 Page 4 of 14 2 Administrative Data 2.1 Identification of the Testing Laboratory Issuing the Test Report Company Name: CETECOM Inc. Department: Compliance Address: 411 Dixon Landing Road Milpitas, CA 95035 U.S.A. Telephone: +1 (408) 586 6200 Fax: +1 (408) 586 6299 Test Lab Manager: Franz Engert Test Engineer: James Donnellan 2.2 Identification of the Client Applicant’s Name: 3SI Security Systems Street Address: 486 Thomas Jones Way City/Zip Code Exton, PA 19341 Country USA Contact Person: Brandon Cromer Phone No. 610-280-2043 e-mail: [email protected] 2.3 Identification of the Manufacturer Manufacturer’s Name: Same as client Manufacturer Address: City/Zip Code Country Test Report #: EMC_ ETHEO_018_14001_MPE FCC ID: Q6KAT140317A Date of Report : 2014-07-07 IC ID: 5043A-AT140317A May 15 2012. Rev 2.0 Page 5 of 14 3 Equipment under Test (EUT) 3.1 Specification of the Equipment under Test Marketing Name: Asset Recovery Device Model No: AT140317US Product Description: Asset Tracking and Alert Device FCC-ID: Q6KAT140317A IC-ID : 5043A-AT140317A Supported frequency bands of operation: GSM/GPRS: 850/900/1800/1900 MHz UMTS: FDD I, II, IV, V & VIII Beacon Transmitter: 216.475 MHz & 219.6MHz Type(s) of Modulation: GMSK/ QPSK & 16QAM Antenna Info: PCB Trace Inverted F type Rated Operating Voltage Range(DC): Internal Battery Operated V min: 3.3V – V max: 4.2V Rated Operating Temperature Range: -20 ⁰C to 60 ⁰C Test Sample status: Production Prototype / Production unit: Prototype Dates of Testing: 2014-05-05 to 2014-05-25 Test Report #: EMC_ ETHEO_018_14001_MPE FCC ID: Q6KAT140317A Date of Report : 2014-07-07 IC ID: 5043A-AT140317A May 15 2012. Rev 2.0 Page 6 of 14 4 RF Exposure Evaluation Requirements 4.1 FCC: Calculations can be made to predict RF field strength and power density levels around typical RF sources using the general equations (3) and (4) on page 19 of the following FCC document: “OET Bulletin 65, Edition 97-01 - Evaluating Compliance with FCC Guidelines for Human Exposure to Radio frequency Electromagnetic Fields”. The table below is excerpted from Table 1B of 47 CFR 1.1310 titled Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure: Frequency Range (MHz) Power density (mW/cm 2 ) Averaging time (minutes) 300 – 1500 f (MHz) /1500 30 1500 – 100.000 1.0 30 Using the equation from page 19 of OET Bulletin 65, Edition 97-01: 2 4R PG S   where: S = power density (in appropriate units, e.g. mW/cm 2 ) P = power input to the antenna (in appropriate units, e.g., mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) Note: 1. This device is used only for fixed and mobile applications. Additionally, according to § 2.1091: The limit for <1.5 GHz mobile operations where no routine evaluation is required is: 1.5W ERP The limit for >1.5 GHz mobile operations where no routine evaluation is required is: 3W ERP 4.2 IC: RSS-102 Section 2.5.2 RF exposure evaluation is required if the separati…

Text truncated - open the document above for the full version.

FCC: Accredited IC recognized # 3462B-1 CETECOM Inc. 411 Dixon Landing Road Š Milpitas, CA 95035 Š U.S.A. Phone: + 1 (408) 586 6200 Š Fax: + 1 (408) 586 6299 Š E-mail: [email protected] Š http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2905571 V1.01 2013-07-29 © Copyright by CETECOM FCC / IC Test Report FOR: 3SI Security Systems Model Name: AT140317US Product Description: Asset Tracking and Alert Device. FCC ID: Q6KAT140317A IC Certification Number: 5043A-AT140317A 47 CFR Part 22, 24, 27 RSS-132 Issue 3 RSS-133 Issue 2 RSS-139 Issue 2 TEST REPORT #: EMC_ ETHEO-018-14001_FCC_22_24_27 DATE: 2014-05-29 Test Report #: EMC_ETHEO_018_14001_FCC_22_24_27 FCC ID: Q6KAT140317A IC ID: 5043A-AT140317A Date of Report : 2014-05-01 Page 2 of 63 Table of Contents 1 Assessment ............................................................................................................................... 3 2 Administrative Data ................................................................................................................. 4 2.1 Identification of the Testing Laboratory Issuing the Test Report .................................................. 4 2.2 Identification of the Client ............................................................................................................. 4 2.3 Identification of the Manufacturer ................................................................................................. 4 2.4 Dates of Testing: ............................................................................................................................ 4 3 Equipment under Test (EUT) ................................................................................................... 5 3.1 Specification of the Equipment under Test .................................................................................... 5 3.2 Identification of the Equipment under Test (EUT) ........................................................................ 6 3.3 Identification of Accessory equipment........................................................................................... 6 4 Summary of Measurement Results .......................................................................................... 7 5 Measurements........................................................................................................................... 9 5.1 Measurement Uncertainty .............................................................................................................. 9 5.7 RF Power Output ..................................................................................................................... 10 5.7.1 References ............................................................................................................................ 10 5.7.2 Limits: .................................................................................................................................. 10 5.7.3 RF Power Output ................................................................................................................. 12 5.7.4 Test Results ........................................................................................................................... 13 5.7.5 ERP /EIRP Plots: ................................................................................................................. 14 5.8 Spurious Emissions Radiated ............................................................................................. 35 5.8.1 References ............................................................................................................................ 35 5.8.2 Limits: .................................................................................................................................. 35 5.8.3 Radiated out of band measurement procedure: ................................................................... 37 5.8.4 Sample Calculations for Radiated Measurements ............................................................... 38 5.8.5 Spectrum Analyzer Settings .................................................................................................. 38 5.8.6 Test Results ........................................................................................................................... 39 5.8.7 Radiates Emission Plots: ...................................................................................................... 42 6 Test Equipment and ancillaries used for tests. ....................................................................... 60 7 Block Diagrams ...................................................................................................................... 61 8 Revision History ..................................................................................................................... 63 Test Report #: EMC_ETHEO_018_14001_FCC_22_24_27 FCC ID: Q6KAT140317A IC ID: 5043A-AT140317A Date of Report : 2014-05-01 Page 3 of 63 1 Assessment The following equipment as further described in section 3 of this test report was evaluated against the applicable criteria specified in FCC CFR47 Parts 22, 24 and 27 & Industry Canada Radio Standard Specifications RSS-GEN Issue 3, RSS-132 Issue 3, RSS-133 Issue 2 and RSS-139 Issue 2. No deviations were ascertained during the course of the tests performed. Company Description Model # 3SI Security Systems Asset tracking and alert devices . AT140317US Report reviewed by: 2014-05-01 Compliance Franz Engert (Compliance Manager) Date Section Name Signature Responsible for the Report: 2014-05-01 Compliance James Donnellan (EMC Engineer) Date Section Name Signature The test results of this test report relate exclusively to the test item specified in Section3. CETECOM Inc. USA does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples of the type of the equ…

Text truncated - open the document above for the full version.

Bluetooth Qualification Test Facility (BQTF) FCC listed: A2LA Accredited IC recognized # 3462B-1 CETECOM Inc. 411 Dixon Landing Road Š Milpitas, CA 95035 Š U.S.A. Phone: + 1 (408) 586 6200 Š Fax: + 1 (408) 586 6299 Š E-mail: [email protected] Š http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2113686 Board of Directors: Dr. Harald Ansorge, Dr. Klaus Matkey, Hans Peter May V2.0 2009-10-30 The BLUETOOTH trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to CETECOM Inc. © Copyright by CETECOM FCC Test Report FOR: 3SI Security Systems Model Name: AT140317US FCC ID: Q6KAT140317A IC ID: 5043A-AT140317A 47 CFR Part 90 47 CFR Part 95 RSS-119 Issue 11 TEST REPORT #: EMC-ETHEO-018-14001_FCC_90_95 DATE: 2014-05-10 Report #: EMC-ETHEO-018-14001_FCC_90_95 FCC ID: Q6KAT140317A Date : 2014-06-23 IC ID: 5043A-AT140317A TABLE OF CONTENTS 1 Assessment _____________________________________________________________________ 4 2 Administrative Data _____________________________________________________________ 5 2.1 Identification of the Testing Laboratory Issuing the EMC Test Report _____________________ 5 2.2 Identification of the Client __________________________________________________________ 5 2.3 Identification of the Manufacturer ___________________________________________________ 5 3 Equipment under Test (EUT) ______________________________________________________ 6 3.1 Specification of the Equipment under Test_____________________________________________ 6 3.2 Identification of the Equipment Under Test (EUT) ______________________________________ 7 3.3 Identification of Accessory equipment ________________________________________________ 7 4 Subject Of Investigation __________________________________________________________ 8 5 Measurements __________________________________________________________________ 9 5.1 Radiated Measurement Procedure ___________________________________________________ 9 5.2 Maximum Peak Output Power _____________________________________________________ 10 5.2.1 References: ____________________________________________________________________________ 10 5.2.2 Limits ________________________________________________________________________________ 10 5.2.3 Test Result: ____________________________________________________________________________ 10 5.2.4 Test Plot ______________________________________________________________________________ 11 5.3 Occupied Bandwidth ______________________________________________________________ 13 5.3.1 References: ____________________________________________________________________________ 13 5.3.2 Limits: ________________________________________________________________________________ 13 5.3.3 Test Result: ____________________________________________________________________________ 13 5.3.4 Test Data/plots: _________________________________________________________________________ 14 5.4 Modulation Characteristics ________________________________________________________ 16 5.5 Transmit Spectrum Mask __________________________________________________________ 16 5.5.1 Transmit Spectrum Mask FCC Part 90 _______________________________________________________ 16 5.5.2 Transmit Spectrum Mask IC RSS-119 _______________________________________________________ 18 5.5.3 Transmit Spectrum Mask FCC Part 95 _______________________________________________________ 19 5.6 Frequency Tolerance _____________________________________________________________ 21 5.6.1 219.6 MHz Beacon ______________________________________________________________________ 21 5.6.2 References: ____________________________________________________________________________ 21 5.6.3 Limits: ________________________________________________________________________________ 21 5.6.4 Results: _______________________________________________________________________________ 21 5.6.5 216.475 MHz Beacon ____________________________________________________________________ 22 5.6.6 References: ____________________________________________________________________________ 22 5.6.7 Limits: ________________________________________________________________________________ 22 5.6.8 Results: _______________________________________________________________________________ 22 5.7 Transmitter Spurious Emissions- Radiated ___________________________________________ 23 5.7.1 219.6 MHz Beacon ______________________________________________________________________ 23 5.7.2 216.475 MHz Beacon ___________________________________________________________________ 26 5.8 Receiver Spurious Emissions _______________________________________________________ 29 5.8.1 References _____________________________________________________________________________ 29 5.8.2 Test Result: ____________________________________________________________________________ 29 Report #: EMC-ETHEO-018-14001_FCC_90_95 FCC ID: Q6KAT140317A Date : 2014-06-23 IC ID: 5043A-AT140317A 6 BLOCK DIAGRAMS ___________________________________________________________ 32 7 Revision History _______________________________________________________________ 34 Report #: EMC-ETHEO-018-14001_FCC_90_95 FCC ID: Q6KAT140317A Date : 2014-06-23 IC ID: 5043A-AT140317A 1 Assessment The following device was evaluated against the applicable criteria specified in FCC rules Parts 90 and 95 of Title 47 of the Code of Federal Regulations and Industry Canada Standards RSS 119 Issue 11 and no deviations were ascertained during the course of the tests performed. Company Description Model # 3SI Security Systems Asset tracking and alert devices AT140317US This report is reviewed by: 2014-06-23 Compliance Franz Engert (Manager Compliance) Date Section Name Signature Responsible for the Report: 2014-05-23 Compliance James Donnellan (Senior EMC Test Engineer) Date Section Name Signature The test results of this test report relate exclusively to the test item specified in Section3. CETECOM Inc. USA does not assume responsibility for any conclus…

Text truncated - open the document above for the full version.

FCC 47 CFR PART 22H and 24E Product Type ： 2G/3G Module Applicant ： Telit Communications S.p.A. Address ： Via Stazione di Prosecco, 5/B, Sgonico, TS 34010, Italy Trade Name ： Telit Model Number ： HE910 Test Specification ： FCC 47 CFR PART 22H: Oct, 2009 FCC 47 CFR PART 24E: Oct, 2009 CANADA RSS-132 ISSUE 2: Sep., 2005 CANADA RSS-133 ISSUE 5: Feb., 2009 Canada RSS-Gen ISSUE 3: Dec., 2010 ANSI/TIA-603-C-2004 Receive Date ： Nov. 30, 2011 Issue Date ： Feb. 03, 2012 Issue by A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 Note: This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. This document may be altered or revised by A Test Lab Techno Corp. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, or any government agencies. The test results in the report only apply to the tested sample. A Test Lab Techno Corp. Report Number: 1112FR12-02 1/115 Revision History Rev. Issue Date Revisions Revised By 00 Dec. 20, 2011 Initial Issue 01 Jan. 30, 2012 Revised software version. Joyce Liao 02 Feb. 03, 2012 Add IC standard and RX of field strength of spurious radiation test data Linda Su A Test Lab Techno Corp. Report Number: 1112FR12-02 2/115 Verification of Compliance Issued Date: 02/03/2012 Product Type : 2G/3G Module Applicant : Telit Communications S.p.A. Address : Via Stazione di Prosecco, 5/B, Sgonico, TS 34010, Italy Trade Name : Telit Model Number : HE910 FCC ID : RI7HE910 IC : 5131A-HE910 EUT Rated Voltage : DC 3.8V Test Voltage : DC 3.4 / 3.8 / 4.2V Applicable Standard : FCC 47 CFR PART 22H: Oct, 2009 FCC 47 CFR PART 24E: Oct, 2009 CANADA RSS-132 ISSUE 2: Sep., 2005 CANADA RSS-133 ISSUE 5: Feb., 2009 Canada RSS-Gen ISSUE 3: Dec., 2010 ANSI/TIA-603-C-2004 Test Result : Complied Performing Lab. : A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 http://www.atl-lab.com.tw/e-index.htm The above equipment was tested by A Test Lab Techno Corp. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2009 and the energy emitted by the sample tested as described in this report is in compliance with the requirements of FCC Rules Part 22H, Part 24E. The test results of this report relate only to the tested sample identified in this report. Approved By ： Reviewed By ： (Manager) (Murphy Wang) (Testing Engineer) (Fly Lu) A Test Lab Techno Corp. Report Number: 1112FR12-02 3/115 TABLE OF CONTENTS 1 General Information ....................................................................................................................... 6 1.1. EUT Description ............................................................................................................................ 6 1.2. Mode of Operation ........................................................................................................................ 7 1.3. EUT Exercise Software................................................................................................................. 7 1.4. Configuration of Test System Details ............................................................................................ 8 1.5. Test Site Environment ................................................................................................................... 9 1.6. Summary of Test Result ....................................................…

Text truncated - open the document above for the full version.