Q6KAT140720AAsset Tracking and Alert Device

Quick Reference Guide 3SI Security Systems Innovation That Protects 3sitracking.com Direction of Travel/ Speed or Stationary # of GPS Satellites Current Voltage - Red Text Indicates Low Battery Group Device is Assigned To Time and Date of Data Device # & Settings Ping/Reset/Chirp Option Max. 10 Fences per Device Click for a List of Track Data Points How Long Device has Been On Time Since Last Data Point Was Received Device Name Current Firmware Version How Long Device has Been Tracking Lat/Long Location ON if Charging How Often Device will Send New Data During Live Tracking Is Device Emitting Beacon Signal? Device Name & Track List Device Closest Address Blue highlight indicates device showing on map Devices Set to Option B or C Hibernate Option LOCATION MAP [email protected] ESP® Hotline: 888.3SI.TRACK (888.374.8722) 01/15 66-0100-101 ESO® Electronic Stake Out® Active Devices 3SI Security Systems 101 Lindenwood Drive, Suite 200, Malvern, PA 19355 [email protected] | 3sisecurity.com THE INFORMATION CONTAINED WITHIN IS FOR EDUCATION/IDENTIFICATION PURPOSES ONLY. 3SI Security Systems is the rightful owner of the information and materials, and nothing herein shall grant a license to the information and materials provided. Any downloading, reproduction or further distribution without prior written permission of 3SI Security Systems is strictly prohibited. Choosing your Device Settings is very important. Consider how you plan to deploy the Device, who will be assigned to view information about the Device and receive Alert Messages, how often you want to receive information on the Device’s location, whether it triggers on Motion or Ping, and how long the battery needs to last. Quick Reference Guide for ESO® GPS Products Motion Sensitivity The Device can be set to trigger on a variety of continuous motion durations depending on how it’s being used. No Motion Reset The Device can be set to stop activation and reset after it has been motionless for various periods of time. (Geo) Fencing A fence is a perimeter around an address. Once the fence perimeter is broken by a Device entering or leaving the perimeter, a text or email alert will be generated. Real-time Ping If Real-time Ping is selected, the Device will respond within moments of the Ping command being sent. Note that Real-time ping will reduce battery life. Ping Reset Users may Reset the Device via the Reset button on the Map Page. If the Device is not manually Reset after being pinged, it will continue tracking until the battery is depleted. A The Active/Status Device Pane OR B The Device List/Last Location Fix Login to access and change Device information or to track Device at 3sitracking.com. Device Settings Select the Device you wish to view/edit either via Chirp Users may send a command to an active device causing it to emit a chirp sound. Chirping will end after 10 minutes or upon the device receiving a cancel command when the Cancel Chirp button is clicked. Beacon The default setting for the Beacon is ON. If the Hand Held Beacon Receiver is not required, the Beacon can be turned off by selecting the Turn Beacon Off button. Hibernate The Hibernate functionality allows the User to place the Device into a non-responsive mode. While in Hibernate mode, the Device will not track on motion, report in for an interval setting, respond to a ping command, trigger, or report battery status alerts. Hibernate may be delayed by scheduling to start at a future date and time. Device Charging The Device battery is charged using the charger shipped with the Device. It takes approximately two to three hours to fully charge the battery. Low Battery Alert The Device will send a low battery text or email alert to the User designated to receive Device alerts when the battery is 3.7V or lower. Please reference the complete ESO User Manual for detailed instructions. Motion The Device can be set to track on Motion. When Motion is selected, the Device will automatically begin tracking when continuous motion is detected.

FCC ID: Q6KAT140720A Model: AT140720US a) NOTICE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. b) NOTICE: Changes or modifications made to this equipment not expressly approved by 3SI Security System, Inc may void the FCC authorization to operate this equipment. INDUSTRY CANADA ID: 5043A-AT140720A Model: AT140720US a.) NOTICE: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : •l'appareil ne doit pas produire de brouillage Important Safety Information Warning: Use of a non-3SI supplied battery may present a risk of fire, explosion, leakage, or other hazard. • Don’t disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery. • Don’t use tools, sharp objects, or excessive force to insert or remove the battery as this can damage the battery. • Don’t let the device or battery come in contact with liquids. Liquids can get into the device’s circuits, leading to corrosion • Use with an already tested/certified micro-USB wall charger. Regulatory Notices equipment. c) Radiofrequency radiation exposure Information: This equipment complies with FCC radiation exposure limitsset forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other (than provided by 3SI) antenna or transmitter. d)NOTICE: This transmitter is authorized by rule under the Low Power Radio Service (47 CFR part 95) and must not cause harmful interference to TV reception or United States Navy SPASUR installations. You do not need an FCC license to operate this transmitter. This transmitter may only be usedto provide: auditory assistance to persons with disabilities, personswho require language translation, or persons in educational settings; health care services to the ill; law enforcement tracking services under agreement with a law enforcement agency; or automated maritime telecommunications system (AMTS) network control communications. Two-way voice communications andall other types of uses not mentioned above are expressly prohibited. e) NOTICE: This device may not interfere with TV reception or Federal Government radar. •l'appareil ne doit pas produire de brouillage et •l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. b.) NOTICE: Changes or modifications made to this equipment not expressly approved by 3SI Security System, Inc may void the IC authorization to operate this equipment. Toute modification non autorisée par 3SI Security Systems,Inc apportée à cet équipement pourrait entrainer l'annulation de l'autorisation de la IC d'opérer cet équipement. c.) Radio frequency radiation exposure Information: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet équipement est conforme aux exigences d’exposition aux radiofréquences de la IC pour un environnement non contrôlé. Il devrait être installé et opéré d'une distance minimum de 20 cm entre le radiateur et votre corps. Le transmetteur ne doit pas être situé ou opéré en conjonction avec une autre antenne ou transmetteur. d.) Antenna Statement Under Industry Canada regulations, this radio transmittermay only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosenthat the equivalent isotropically radiated power (e.i.r.p.) is notmore than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada.Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Normas Oficiales Mexicanas Model: AT140720US NOTICE: This device complies with the NOM safety standards: •NOM-001-SCFI-1993 •NOM-003-SCFI-2000 •NOM-016-SCFI-1993 •NOM-019-SCFI-2000 2015-01-09 AT140720REG

To Whom It May Concern: Subject: Model Equality Attestation We, 3SI SECURITY SYSTEMS INC, 101 Lindenwood Drive Suite 200 Malvern, PA 19355 USA hereby attest that the RF board termed 3XGRT_US can be used interchangeably in two of our products, identified below. RF parametric performance of model AT140704US and AT140720US is determined by the 3XGRT_US sub-assembly component. As summarized below, model AT140704US includes the 3XGRT_US and the 3XGAEB *) boards. Model AT140720US contains 3XRT_US board only. The two models have different housings. 3SI Model: AT1400704US 3SI Model: AT1400720US FCC ID: Q6KAT140704A FCC ID: Q6KAT140720A IC ID: 5043A-AT140704A IC ID: 5043A-AT140720A 3XGRT_US + 3XGAEB *) 3XGRT_US only Housing: 4.5” x 4.5” x 0.75” Housing: 4.2” x 2.5” x 0.7” Identical Firmware Identical Internal Antennas Identical PCB layout and component placement Identical Schematic and component values *) 3XGAEB = Accessory Expansion Board (digital I/O and charger board) Signature: _________________________ BRANDON CROMER 3SI Security Engineering Manager Dated: 2015-01-28

To Whom It May Concern: Subject: Validity of Test Results from Testing / Certification of the integrated Module WE, 3SI SECURITY SYSTEMS INC, 101 Lindenwood Drive Suite 200 Malvern, PA 19355 USA This is to confirm that that the results from conducted tests applied for modular FCC and IC approval for the radio module Telit FCC ID: RI7UE910NA and IC ID: 5131A-UE910NA which is incorporated into our host equipment Asset Tracking and Alert Device, FCC-ID: Q6KAT140720A, IC-ID: 5043A-AT140720A model no. AT140720US and as reported in the module test report #130225W02-RP, issued on 2013-03-25, by Compliance Certification Services Inc., USA accurately represent the test results under the new conditions when the identified radio module is integrated in the identified host equipment. By integration of the said radio module into the identified host equipment no changes were made to it or by external adaptation circuitry that impacts the validity of the results of the original module’s test reports. Name: BRANDON CROMER Signature:_________________________ Dated: 2015-01-12

Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 January 12, 2015 Dear FCC Examiner, Pursuant to Paragraphs §0.457 and §0.459 of the Commission’s Rules (47 C.F.R.) and Section §522(b)(4) of the Freedom of Information Act, 3SI Security Systems Inc. requests permanent confidentiality granted for the following product: FCC ID IC ID Title/Model Q6KAT140720A 5043A-AT140720A AT140720US For the product stated above, we request that the following information be held confidential: 1) Block diagram and operational description 2) Schematics 3) Parts list The items listed above contain 3SI Security Systems trade secrets and proprietary information that is otherwise not available to the public. Should you have any questions, please contact me at the address below. Regards, __________________________ ___________________ Brandon Cromer Date 3SI Security Systems 101 Lindenwood Drive Suite 200 Malvern, PA 19355 January 13, 2015

Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 January 26, 2015 Dear FCC Examiner, Pursuant to Paragraphs §0.457 and §0.459 of the Commission’s Rules (47 C.F.R.) and Section §522(b)(4) of the Freedom of Information Act, 3SI Security Systems Inc. requests 180 day confidentiality granted for the following product: FCC ID IC ID Title/Model Q6KAT140720A 5043A-AT140720A AT140720US For the product stated above, we request that the following information be held confidential: 1) Quick Reference Guide This radio product is intended to be used by law enforcement agencies. Disclosure of the above document to the public could impair the agencies effectiveness, as well as compromise 3SI Security Systems trade secrets. Should you have any questions, please contact me at the address below. Regards, __________________________ ___________________ Brandon Cromer Date 3SI Security Systems 101 Lindenwood Drive Suite 200 Malvern, PA 19355 January 27, 2015

FCC ID: Q6KAT140920A IC ID: 5043A-AT140920A EXTERNAL PHOTOGRAPHS 1. Top side view of the radio product. FCC ID: Q6KAT140920A IC ID: 5043A-AT140920A 2. Bottom side view of the radio product. 3. Side views of the radio product FCC ID: Q6KAT140920A IC ID: 5043A-AT140920A 4. Top view of the radio product 5. Bottom view of the radio product FCC ID: Q6KAT140920A IC ID: 5043A-AT140920A 6. Radio product mounted in charging adapter Micro USB FCC compliant charger FCC ID: Q6KAT140920A IC ID: 5043A-AT140920A 7. Detailed views of charging adapter

FCC ID IC ID: 1. P : Q6KAT 5043A‐A T Product lab 140720A T140720A PRO bel is locat PRODU LABE L A A ODUCT L ted on the CT L LABEL LO housing, a OCATION as represen N nted beloww. FCC ID IC ID: 2. D : Q6KAT 5043A‐A T Detailed vie 140720A T140720A ew of the r A A radio product label.

FCC ID IC ID: 5 INTERN 1. To : Q6KAT1 5043A‐AT NAL PHO op side view 140720A T140720A TOGRAP of the radio p A HS product with the top coverr and battery For deta FCC ID: y removed. ailedinternal view RI7UE910NA IC I JF2 module w w of the module, se D: 5131A‐UE910N with the shield rem ee: NA moved FCC ID: Q6KAT140720A IC ID: 5043A‐AT140720A 2. Top side view of the radio product with the battery installed. FCC ID: Q6KAT140720A IC ID: 5043A‐AT140720A 3. Bottom side view of the radio product with the battery removed.

TECHNICAL MANUAL Telit UE910-NAR Data Terminal Module Rev.0 2013/03/14 ANNEX 2 UE910-NAR MODULE PHOTOS Pag.6 of 28 TECHNICAL MANUAL Telit UE910-NAR Data Terminal Module Rev.0 2013/03/14 Pag.7 of 28 TECHNICAL MANUAL Telit UE910-NAD Data Terminal Module Rev.0 2013/03/26 ANNEX 2 UE910-NAD MODULE PHOTOS Pag.6 of 28 TECHNICAL MANUAL Telit UE910-NAD Data Terminal Module Rev.0 2013/03/26 Pag.7 of 28

Radio Frequency Exposure Evaluation Report for 3SI Security Systems Model: AT140720US Asset Tracking and Alert Device FCC ID: Q6KAT140720A IC Certification Number: 5043A-AT140720A Applied Rules and Standards CFR Part Part 1 (1.1307 &1.1310), Part 2 (2.1091), FCC KDB 447498 D01 General 24 RF Exposure Guidance v05r02 Industry Canada RSS-102, Issue 4 of March 2010 Report number: EMC-3SISE-039-14001_MPE DATE: 2015-01-20 Test Report #: EMC-3SISE-039-14001-RT_MPE FCC ID: Q6KAT140720A Date of Report: 2015-01-20 IC Cert. No.: 5043A-AT140720A Page 2 of 7 1 Administrative Data 1.1 Identification of the Testing Laboratory Issuing the Test Report Company Name: CETECOM Inc. Department: Compliance Address: 411 Dixon Landing Road Milpitas, CA 95035 U.S.A. Telephone: +1 (408) 586 6200 Fax: +1 (408) 586 6299 Acting Test Lab Manager Franz Engert 1.2 Identification of the Client / Manufacturer Applicant’s Name: 3SI Security Systems Street Address: 2055 N Brown Road, ste 225, Lawrenceville City/Zip Code GA 30043 Country USA Contact Person: Waldemar Sierocinski Phone No. 954-214-5398 Fax: 954-214-5398 e-mail: [email protected] Test Report #: EMC-3SISE-039-14001-RT_MPE FCC ID: Q6KAT140720A Date of Report: 2015-01-20 IC Cert. No.: 5043A-AT140720A Page 3 of 7 2 Equipment under Assessment Marketing Name / Description: Asset Tracking and Alert Device Model Number: AT140720US FCC-ID : Q6KAT140720A IC Cert Number: 5043A-AT140720A Product Description: Asset Tracking and Alert Device equipped with 3G cellular radio module, beacon radio and GPS Transmitter information: 1. 3G cellular radio module: Telit, model UE910-NAD, FCC-ID: RI7UE910NA, IC ID: 5131A-UE910NA, GSM 850/1900MHz, GPRS / EDGE multi-slot class 12/33 operation WCDMA / HSPA+ 850/1900/ MHz; 2. 216.475 MHz / 219.6 MHz* / Beacon (*US only), pulsed CW at 20% duty cycle; 3. GPS 1575.42 MHz; Co-located Transmitters/ Antennas?  Yes (Cellular and Beacon)  No Device Category:  Fixed Installation  Mobile  Portable and Portable Exposure Category:  Occupational/ Controlled  General Population/ Uncontrolled Antenna info: cellular: internal: inverted F Antenna, 850MHz: -6.8 dBi, 1900MHz: -1.9 dBi beacon (pcb loop): less than minus 10 dBi; Rated Operating Voltage Range: Vmin: 3.4V - Vmax: 4.2V Rated Operating Temperature Range: Tmin: -20°C/ Tmax: 60°C Test Sample Status: Prototype Test Report #: EMC-3SISE-039-14001-RT_MPE FCC ID: Q6KAT140720A Date of Report: 2015-01-20 IC Cert. No.: 5043A-AT140720A Page 4 of 7 3 Assessment This RF Exposure evaluation report provides information about compliance of the below identified device with the RF Exposure limits for mobile or fixed devices as defined in FCC CFR Part 1 (1.1307 &1.1310), Part 2 (2.1091) and IC standard RSS-102 under given conditions (measured or rated RF output power, antenna gain, distance towards human body, multiple transmitter information as presented by the applicant). In addition, maximum antenna gain or minimum distance towards the human body is calculated, respectively, where relevant. The device meets the limits as stipulated by the above given FCC and IC rule parts based on available specifications. Company Description Model # 3SI Security Systems Asset Tracking and Alert Devices AT140720US Report reviewed by: 2015-1-20 Compliance Franz Engert (EMC Test Lab Manager) Date Section Name Signature Responsible for the Report: 2015-1-20 Compliance James Donnellan (Sr. EMC Engineer) Date Section Name Signature Test Report #: EMC-3SISE-039-14001-RT_MPE FCC ID: Q6KAT140720A Date of Report: 2015-01-20 IC Cert. No.: 5043A-AT140720A Page 5 of 7 4 RF Exposure Limits and FCC and IC Basic Rules For the specific described radio apparatus the following basic limits and rules apply for both, FCC and IC where not indicated differently. 4.1 Maximum Permissible Exposure (MPE) Limits acc. to FCC 1.1310(e) / RSS-102, cl. 4.2: Frequency Range (MHz) Power density (mW/cm 2 ) Averaging time (minutes) 300 – 1500 f (MHz) /1500 30 (IC:6) 1500 – 100.000 (IC:1500 – 150000) 1.0 30 (IC:6) 4.2 Routine Environmental Evaluation Categorical Exclusion Limits acc. to FCC 2.109(c) / RSS-102, cl. 2.5 (rounded to 1 decimal point): Operating frequency < 1.5GHz: excluded if ERP < 1.5W / 31.8dBm (IC: 2.5W / 34.0dBm EIRP); Operating frequency > 1.5GHz: excluded if ERP < 3.0W / 34.8dBm (IC: 5.0W / 37.0dBm EIRP); 4.3 EMC Output Power Limits (ERP/EIRP) acc. to FCC part 22/24/27 / IC RSS-132, RSS- 133, RSS-139 (to be additionally taken into account for maximum antenna gain considerations) part 22: 7W ERP / 38.5dBm (IC: 11.5W / 40.6dBm EIRP) part 24: 2W EIRP / 33.0dBm part 27: 1W EIRP / 30.0dBm Per KDB 447498 D01 FCC allows calculative estimation of RF exposure for mobile applications when routine environmental evaluation categorical exclusion applies and also for fixed applications. When categorical exclusion can not be claimed for mobile applications MPE measurement is required for TCB approval. RSS-102 of Industry Canada does generally not require RF exposure evaluation for fixed or mobile applications which stay below the given exclusion limits. 4.4 RF Exposure Estimation (MPE Estimation) Having available the source based average output power and peak antenna gain or the ERP/EIRP of the specified device and for a known minimum distance of it’s radiating structures from the body of persons according to it’s use cases (at least 20cm) the power density at that distance can be estimated by the following formula for plane-wave equivalent conditions (far-field conditions), when ground reflection is neglected. 2 4R PG S   where: S = power density (mW/cm 2 or W/m 2 ) P = power input to the antenna (mW or W) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (cm or m) Test Report #: EMC-3SISE-039-14001-RT_MPE FCC ID: Q6KAT140720A Date of Report: 2015-01-20 IC Cert. No.: 5043A-AT140720A Page 6 of 7 5 Evaluations The following calculations a…

Text truncated - open the document above for the full version.

FCC: Accredited IC recognized # 3462B-1 CETECOM Inc. 411 Dixon Landing Road  Milpitas, CA 95035  U.S.A. Phone: + 1 (408) 586 6200  Fax: + 1 (408) 586 6299  E-mail: [email protected]  http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2905571 V1.01 2013-07-29 © Copyright by CETECOM FCC / IC Test Report FOR: 3SI Security Systems Model Name: AT140720US Product Description: Asset Tracking and Alert Device. FCC ID: Q6KAT140720A IC Certification Number: 5043A-AT140720A 47 CFR Part 22, 24 RSS-132 Issue 3 RSS-133 Issue 2 TEST REPORT #: EMC-3SISE-039-14001_RT _FCC_22_24_Rev1 DATE: 2015-1-27 EMC-3SISE-039-14001_RT_FCC _22_24_Rev1 FCC ID: Q6KAT140720A IC ID: 5043A-AT140720A Date of Report : 2015-1-27 Page 2 of 39 Table of Contents 1 Assessment ............................................................................................................................... 3 2 Administrative Data ................................................................................................................. 4 2.1 Identification of the Testing Laboratory Issuing the Test Report .................................................. 4 2.2 Identification of the Client ............................................................................................................. 4 2.3 Identification of the Manufacturer ................................................................................................. 4 2.4 Dates of Testing: ............................................................................................................................ 4 3 Equipment under Test (EUT) ................................................................................................... 5 3.1 Specification of the Equipment under Test .................................................................................... 5 3.2 Identification of the Equipment under Test (EUT) ........................................................................ 6 3.3 Identification of Accessory equipment........................................................................................... 6 4 Summary of Measurement Results .......................................................................................... 7 5 Measurements........................................................................................................................... 9 5.1 Measurement Uncertainty .............................................................................................................. 9 5.2 Nominal Environmental Conditions .............................................................................................. 9 5.3 Nominal Environmental Test Conditions ....................................................................................... 9 5.4 Inheriting Test Results from Incorporated Module Certification: .................................................. 9 5.5 Nominal Cellular Test Conditions .................................................................................................. 9 5.6 Additional Test Information. ......................................................................................................... 9 5.7 RF Power Output .......................................................................................................................... 10 References ............................................................................................................................ 10 5.7.1 Limits: .................................................................................................................................. 10 5.7.2 RF Power Output ................................................................................................................. 11 5.7.4 Conducted output power Measurement procedure .............................................................. 11 5.7.5 Measured RMS Power comparison with Tune up Procedure ............................................. 11 5.7.6 Measured Peak power comparison with Module Test Report .............................................. 12 5.7.7 ERP / EIRP Calculations ..................................................................................................... 13 5.7.8 5.8 Spurious Emissions Radiated ....................................................................................................... 14 References ............................................................................................................................ 14 5.8.1 Limits: .................................................................................................................................. 14 5.8.2 Sample Calculations for Radiated Measurements ............................................................... 17 5.8.3 Spectrum Analyzer Settings .................................................................................................. 17 5.8.4 Test Results ........................................................................................................................... 18 5.8.5 Radiated Emission Plots: ..................................................................................................... 20 5.8.6 6 Test Equipment and Ancillaries used for tests. ...................................................................... 36 7 Block Diagrams ...................................................................................................................... 37 8 Revision History ..................................................................................................................... 39 EMC-3SISE-039-14001_RT_FCC _22_24_Rev1 FCC ID: Q6KAT140720A IC ID: 5043A-AT140720A Date of Report : 2015-1-27 Page 3 of 39 1 Assessment The following equipment as further described in section 3 of this test report was evaluated against the applicable criteria specified in FCC CFR47 Parts 22 and 24 and Industry Canada Radio Standard Specifications RSS-132 Issue 3 and RSS…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. FCC ID: RI7UE910NA IC: 5131A-UE910NA Report No.: T130225W02-RP Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 / 109 Rev.00 FCC 47 CFR PART 22 SUBPART H AND PART 24 SUBPART E & INDUSTRY CANADA RSS-132 & RSS-133 TEST REPORT For 2G,3G wireless module Model: UE910-NAR, UE910-NAD Trade Name: Telit Issued to TELIT COMMUNICATIONS S.P.A. Via Stazione di Prosecco 5/b, 34010 SGONICO, TRIESTE - ITALY Issued by Compliance Certification Services Inc. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) http://www.ccsrf.com [email protected] Issued Date: March 25, 2013 Compliance Certification Services Inc. FCC ID: RI7UE910NA IC: 5131A-UE910NA Report No.: T130225W02-RP Page 2 Rev.00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 March 25, 2013 Initial Issue ALL Angel Cheng Compliance Certification Services Inc. FCC ID: RI7UE910NA IC: 5131A-UE910NA Report No.: T130225W02-RP Page 3 Rev.00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION............................................................................................. 4 2. EUT DESCRIPTION .................................................................................................................... 5 3. TEST METHODOLOGY ............................................................................................................. 6 3.1 EUT CONFIGURATION.............................................................................................................. 6 3.2 EUT EXERCISE......................................................................................................................... 6 3.3 GENERAL TEST PROCEDURES.................................................................................................. 6 3.4 DESCRIPTION OF TEST MODES................................................................................................. 7 4. INSTRUMENT CALIBRATION................................................................................................. 8 4.1 MEASURING INSTRUMENT CALIBRATION........................................................................... 8 4.2 MEASUREMENT EQUIPMENT USED .............................................................................. 9 4.3 MEASUREMENT UNCERTAINTY .................................................................................. 10 5. FACILITIES AND ACCREDITATIONS ................................................................................. 11 5.1 FACILITIES................................................…

Text truncated - open the document above for the full version.