Q6KAT140704AAsset Tracking and Alert Device

Important Safety Information Warning: Use of a non‐3SI supplied battery may present a risk of fire, explosion, leakage, or other hazard. •Don’t disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery. •Don’t use tools, sharp objects, or excessive force to insert or remove thebatteryasthiscandamagethebatterythe battery as this can damage the battery. •Don’t let the device or battery come in contact with liquids. Liquids can get into the device’s circuits, leading to corrosion •Use with an already tested/certified micro‐USB wall charger. Regulatory Notices FCC ID: Q6KAT140704A Model: AT140704US INDUSTRY CANADA ID: 5043A‐AT140704A Model: AT140704US )NOTICE Approved external antenna model/Modèle d'antenne externe agréé: AU‐3S‐GSM by San Jose Technologies Inc. Gain of 1 dBi a) NOTICE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. b) NOTICE: Changes or modifications made to this equipment not expressly approved by 3SI Security System, Inc may void the FCC authorization to operatethisequipment a.) NOTICE: This device complies with RSS‐210 of Industry Canada. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : • l'appareilnedoitpasproduiredebrouillage operate this equipment. c) Radiofrequency radiation exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co‐located or operating in conjunction with any other (than provided by 3SI) antenna or transmitter. d)NOTICE: This transmitter is authorized b yrule under the Low Power Radio Service l appareil ne doit pas produire de brouillage et •l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. b.) NOTICE: Changes or modifications made to this equipment not expressly approved by 3SI Security System, Inc may void the IC authorization to operate this equipment. Toute modification non autorisée par 3SI Security Systems,Inc apportée à cet équipement pourrait entrainer l'annulation de l'autorisation y (47 CFR part 95) and must not cause harmful interference to TV reception or United States Navy SPASUR installations. You do not need an FCC license to operate this transmitter. This transmitter may only be used to provide: auditory assistance to persons with disabilities, persons who require language translation, or persons in educational settings; health care services to the ill; law enforcement tracking services under agreement with a law enforcement agency; or automated maritime telecommunications system (AMTS) network control communications. Two‐way voice communications and all other types of uses not idblhibi d de la IC d'opérer cet équipement. c.) Radio frequency radiation exposure Information: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed andoperatedwithminimumdistanceof20cmbetweentheradiatorand your body. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. Cet équipement est conforme aux exigences d’exposition aux radiofréquences de la IC pour un environnement non contrôlé. Il devrait êtreinstalléetopéréd'unedistanceminimumde20cmentreleradiateuret mentionedabove are expresslyprohibited. êtreinstalléetopéréd unedistanceminimumde20cmentreleradiateuret votrecorps.Letransmetteurnedoitpasêtresituéouopéréenconjonction avec une autre antenne ou transmetteur. d.) Antenna Statement Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessar yfor successful communication. Normas Oficiales Mexicanas Model: AT140704US NOTICE: y Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'unecommunication satisfaisante. This device complies with the NOM safety standards: •NOM‐001‐SCFI‐1993 •NOM‐003‐SCFI‐2000 •NOM‐016‐SCFI‐1993 •NOM‐019‐SCFI‐2000 2014‐12‐05 AT140704REG

To Whom It May Concern: Subject: Validity of Test Results from Testing / Certification of the integrated Module WE, 3SI SECURITY SYSTEMS INC, 2055 North Brown Road Suite 225 Lawrenceville GA 30043, USA This is to confirm that that the results from conducted tests applied for modular FCC and IC approval for the radio module Telit FCC ID: RI7UE910NA and IC ID: 5131A-UE910NA which is incorporated into our host equipment Asset Tracking and Alert Device, FCC-ID: Q6KAT140704A, IC-ID: 5043A-AT140704A model no. AT140704US and as reported in the module test report #130225W02-RP, issued on 2013-03-25, by Compliance Certification Services Inc., USA accurately represent the test results under the new conditions when the identified radio module is integrated in the identified host equipment. By integration of the said radio module into the identified host equipment no changes were made to it or by external adaptation circuitry that impacts the validity of the results of the original module’s test reports. Name: BRANDON CROMER Signature:_________________________ Dated: 2014-12-06

Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 December 6, 2014 Dear FCC Examiner, Pursuant to Paragraphs §0.457 and §0.459 of the Commission’s Rules (47 C.F.R.) and Section §522(b)(4) of the Freedom of Information Act, 3SI Security Systems Inc. requests permanent confidentiality granted for the following product: FCC ID IC ID Title/Model Q6KAT140704A 5043A-AT140704A AT140704US For the product stated above, we request that the following information be held confidential: 1) Block diagram and operational description 2) Schematics 3) Parts list The items listed above contain 3SI Security Systems trade secrets and proprietary information that is otherwise not available to the public. Should you have any questions, please contact me at the address below. Regards, __________________________ ___________________ Brandon Cromer Date 3SI Security Systems 2055 North Brown Road Suite 225 Lawrenceville GA 30043 12/7/2014

FCC ID: Q6KAT140704A IC ID: 5043A‐AT140704A PRODUCT LABEL LOCATION 1. Product label is located on the housing, as represented below. PRODUCT LABEL FCC ID: Q6KAT140704A IC ID: 5043A‐AT140704A 2. Detailed view of the radio product label.

FCC ID IC ID: 5 INTERN 1. To : Q6KAT1 5043A‐AT NAL PHO op side view 140704A T140704A TOGRAP of the radio p A HS product with the top coverr and batteryy removed. For detailed inter FCC ID: RI7UE910 JF2 module w rnal view of the m 0NA IC ID: 5131A‐ with the shield rem odule, see: ‐UE910NA moved FCC ID: Q6KAT140704A IC ID: 5043A‐AT140704A 2. Top side view of the radio product with the battery installed in the expansion board. FCC ID: Q6KAT140704A IC ID: 5043A‐AT140704A 3. Bottom side view of the radio product, removed from the housing.

TECHNICAL MANUAL Telit UE910-NAR Data Terminal Module Rev.0 2013/03/14 ANNEX 2 UE910-NAR MODULE PHOTOS Pag.6 of 28 TECHNICAL MANUAL Telit UE910-NAR Data Terminal Module Rev.0 2013/03/14 Pag.7 of 28 TECHNICAL MANUAL Telit UE910-NAD Data Terminal Module Rev.0 2013/03/26 ANNEX 2 UE910-NAD MODULE PHOTOS Pag.6 of 28 TECHNICAL MANUAL Telit UE910-NAD Data Terminal Module Rev.0 2013/03/26 Pag.7 of 28

Radio Frequency Exposure Evaluation Report for 3SI Security Systems Model: AT140704US Asset Tracking and Alert Device FCC ID: Q6KAT140704A IC Certification Number: 5043A-AT140704A Applied Rules and Standards CFR Part Part 1 (1.1307 &1.1310), Part 2 (2.1091), FCC KDB 447498 D01 General 24 RF Exposure Guidance v05r02 Industry Canada RSS-102, Issue 4 of March 2010 Report number: EMC-3SISE-038-14001-ATM_MPE_Rev0 DATE: 2014-12-03 Test Report #: EMC-3SISE-038-14001-ATM_MPE_Rev0 FCC ID: Q6KAT140704A Date of Report: 2014-11-11 IC Cert. No.: 5043A-AT140704A Page 2 of 8 1 Administrative Data 1.1 Identification of the Testing Laboratory Issuing the Test Report Company Name: CETECOM Inc. Department: Compliance Address: 411 Dixon Landing Road Milpitas, CA 95035 U.S.A. Telephone: +1 (408) 586 6200 Fax: +1 (408) 586 6299 Acting Test Lab Manager Franz Engert 1.2 Identification of the Client / Manufacturer Applicant’s Name: 3SI Security Systems Street Address: 2055 N Brown Road, ste 225, Lawrenceville City/Zip Code GA 30043 Country USA Contact Person: Waldemar Sierocinski Phone No. 954-214-5398 Fax: 954-214-5398 e-mail: [email protected] Test Report #: EMC-3SISE-038-14001-ATM_MPE_Rev0 FCC ID: Q6KAT140704A Date of Report: 2014-11-11 IC Cert. No.: 5043A-AT140704A Page 3 of 8 2 Equipment under Assessment Marketing Name / Description: Asset Tracking and Alert Device Model Number: AT140704US FCC-ID : Q6KAT140704A IC Cert Number: 5043A-AT140704A Product Description: Asset Tracking and Alert Device equipped with 3G cellular radio module, beacon radio and GPS Transmitter information: 1. 3G cellular radio module: Telit, model UE910-NAD, FCC-ID: RI7UE910NA, IC ID: 5131A-UE910NA, GSM 850/1900MHz, GPRS / EDGE multi-slot class 12/33 operation WCDMA / HSPA+ 850/1900/ MHz; 2. 216.475 MHz / 219.6 MHz* / Beacon (US only), pulsed CW at 20% duty cycle; 3. GPS 1575.42 MHz; Co-located Transmitters/ Antennas?  Yes (Cellular and Beacon)  No Device Category:  Fixed Installation  Mobile  Portable Exposure Category:  Occupational/ Controlled  General Population/ Uncontrolled Antenna info w. rated gain: cellular internal: inverted F Antenna, 850MHz: -6.8 dBi, 1900MHz: -1.9 dBi cellular external: Model: AU-3S-GSM of San Jose Technology Inc., 1 dBi, attenuation of 3m RG-174 antenna cable: ca. 3 dB; beacon (pcb loop): < - 10 dBi; Rated Operating Voltage Range: Vmin: 3.4V - Vmax: 4.2V Rated Operating Temperature Range: Tmin: -20°C/ Tmax: 60°C Test Sample Status: Prototype Test Report #: EMC-3SISE-038-14001-ATM_MPE_Rev0 FCC ID: Q6KAT140704A Date of Report: 2014-11-11 IC Cert. No.: 5043A-AT140704A Page 4 of 8 3 Assessment This RF Exposure evaluation report provides information about compliance of the below identified device with the RF Exposure limits for mobile or fixed devices as defined in FCC CFR Part 1 (1.1307 &1.1310), Part 2 (2.1091) and IC standard RSS-102 under given conditions (measured or rated RF output power, antenna gain, distance towards human body, multiple transmitter information as presented by the applicant). In addition, maximum antenna gain or minimum distance towards the human body is calculated, respectively, where relevant. The device meets the limits as stipulated by the above given FCC and IC rule parts based on available specifications. Company Description Model # 3SI Security Systems Asset Tracking and Alert Devices AT140704US Report reviewed by: 2014-12-03 Compliance Franz Engert (Compliance Manager) Date Section Name Signature Responsible for the Report: 2014-12-03 Compliance James Donnellan (Sr EMC Engineer) Date Section Name Signature Test Report #: EMC-3SISE-038-14001-ATM_MPE_Rev0 FCC ID: Q6KAT140704A Date of Report: 2014-11-11 IC Cert. No.: 5043A-AT140704A Page 5 of 8 4 RF Exposure Limits and FCC and IC Basic Rules For the specific described radio apparatus the following basic limits and rules apply for both, FCC and IC where not indicated differently. 4.1 Maximum Permissible Exposure (MPE) Limits acc. to FCC 1.1310(e) / RSS-102, cl. 4.2: Frequency Range (MHz) Power density (mW/cm 2 ) Averaging time (minutes) 300 – 1500 f (MHz) /1500 30 (IC:6) 1500 – 100.000 (IC:1500 – 150000) 1.0 30 (IC:6) 4.2 Routine Environmental Evaluation Categorical Exclusion Limits acc. to FCC 2.109(c) / RSS-102, cl. 2.5 (rounded to 1 decimal point): Operating frequency < 1.5GHz: excluded if ERP < 1.5W / 31.8dBm (IC: 2.5W / 34.0dBm EIRP); Operating frequency > 1.5GHz: excluded if ERP < 3.0W / 34.8dBm (IC: 5.0W / 37.0dBm EIRP); 4.3 EMC Output Power Limits (ERP/EIRP) acc. to FCC part 22/24/27 / IC RSS-132, RSS- 133, RSS-139 (to be additionally taken into account for maximum antenna gain considerations) part 22: 7W ERP / 38.5dBm (IC: 11.5W / 40.6dBm EIRP) part 24: 2W EIRP / 33.0dBm part 27: 1W EIRP / 30.0dBm Per KDB 447498 D01 FCC allows calculative estimation of RF exposure for mobile applications when routine environmental evaluation categorical exclusion applies and also for fixed applications. When categorical exclusion cannot be claimed for mobile applications MPE measurement is required for TCB approval. RSS-102 of Industry Canada does generally not require RF exposure evaluation for fixed or mobile applications which stay below the given exclusion limits. 4.4 RF Exposure Estimation (MPE Estimation) Having available the source based average output power and peak antenna gain or the ERP/EIRP of the specified device and for a known minimum distance of it’s radiating structures from the body of persons according to it’s use cases (at least 20cm) the power density at that distance can be estimated by the following formula for plane-wave equivalent conditions (far-field conditions), when ground reflection is neglected. 2 4R PG S   where: S = power density (mW/cm 2 or W/m 2 ) P = power input to the antenna (mW or W) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (cm or m) Test Report #: EMC-3SISE-038-14001…

Text truncated - open the document above for the full version.

FCC: Accredited IC recognized # 3462B-1 CETECOM Inc. 411 Dixon Landing Road  Milpitas, CA 95035  U.S.A. Phone: + 1 (408) 586 6200  Fax: + 1 (408) 586 6299  E-mail: [email protected]  http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2905571 V1.01 2013-07-29 © Copyright by CETECOM FCC / IC Test Report FOR: 3SI Security Systems Model Name: AT140704US Product Description: Asset Tracking and Alert Device. FCC ID: Q6KAT140704A IC Certification Number: 5043A-AT140704A 47 CFR Part 22, 24 RSS-132 Issue 3 RSS-133 Issue 2 TEST REPORT #: EMC-3SISE-038-14001-ATM_FCC_22_24 DATE: 2014-12-03 Test Report #: EMC-3SISE-038-14001-ATM_FCC _22_24 FCC ID: Q6KAT140704A IC ID: 5043A-AT140704A Date of Report : 2014-12-03 Page 2 of 37 Table of Contents 1 Assessment ............................................................................................................................... 3 2 Administrative Data ................................................................................................................. 4 2.1 Identification of the Testing Laboratory Issuing the Test Report .................................................. 4 2.2 Identification of the Client ............................................................................................................. 4 2.3 Identification of the Manufacturer ................................................................................................. 4 2.4 Dates of Testing: ............................................................................................................................ 4 3 Equipment under Test (EUT) ................................................................................................... 5 3.1 Specification of the Equipment under Test .................................................................................... 5 3.2 Identification of the Equipment under Test (EUT) ........................................................................ 6 3.3 Identification of Accessory equipment........................................................................................... 6 4 Summary of Measurement Results .......................................................................................... 7 5 Measurements........................................................................................................................... 9 5.1 Measurement Uncertainty .............................................................................................................. 9 5.2 Nominal Environmental Conditions .............................................................................................. 9 5.3 Nominal Environmental Test Conditions ....................................................................................... 9 5.4 Inheriting Test Results from Incorporated Module Certification: .................................................. 9 5.5 Nominal Cellular Test Conditions .................................................................................................. 9 5.6 Additional Test Information. .......................................................................................................... 9 5.7 RF Power Output .......................................................................................................................... 10 References ............................................................................................................................ 10 5.7.1 Limits: .................................................................................................................................. 10 5.7.2 RF Power Output ................................................................................................................. 11 5.7.4 Conducted output power Measurement procedure .............................................................. 11 5.7.5 Test Results ........................................................................................................................... 11 5.7.6 5.8 Spurious Emissions Radiated ....................................................................................................... 12 References ............................................................................................................................ 12 5.8.1 Limits: .................................................................................................................................. 12 5.8.2 Sample Calculations for Radiated Measurements ............................................................... 15 5.8.3 Spectrum Analyzer Settings .................................................................................................. 15 5.8.4 Test Results ........................................................................................................................... 16 5.8.5 Radiated Emission Plots: ..................................................................................................... 18 5.8.6 6 Test Equipment and Ancillaries used for tests. ...................................................................... 34 7 Block Diagrams ...................................................................................................................... 35 8 Revision History ..................................................................................................................... 37 Test Report #: EMC-3SISE-038-14001-ATM_FCC _22_24 FCC ID: Q6KAT140704A IC ID: 5043A-AT140704A Date of Report : 2014-12-03 Page 3 of 37 1 Assessment The following equipment as further described in section 3 of this test report was evaluated against the applicable criteria specified in FCC CFR47 Parts 22 and 24 and Industry Canada Radio Standard Specifications RSS-132 Issue 3 and RSS-133 Issue 2. No deviations were ascertained during the course of the tests performed. Company Description Model # 3SI Security Systems Asset tracking and alert devices . AT140704US Repor…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. FCC ID: RI7UE910NA IC: 5131A-UE910NA Report No.: T130225W02-RP Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 / 109 Rev.00 FCC 47 CFR PART 22 SUBPART H AND PART 24 SUBPART E & INDUSTRY CANADA RSS-132 & RSS-133 TEST REPORT For 2G,3G wireless module Model: UE910-NAR, UE910-NAD Trade Name: Telit Issued to TELIT COMMUNICATIONS S.P.A. Via Stazione di Prosecco 5/b, 34010 SGONICO, TRIESTE - ITALY Issued by Compliance Certification Services Inc. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) http://www.ccsrf.com [email protected] Issued Date: March 25, 2013 Compliance Certification Services Inc. FCC ID: RI7UE910NA IC: 5131A-UE910NA Report No.: T130225W02-RP Page 2 Rev.00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 March 25, 2013 Initial Issue ALL Angel Cheng Compliance Certification Services Inc. FCC ID: RI7UE910NA IC: 5131A-UE910NA Report No.: T130225W02-RP Page 3 Rev.00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION............................................................................................. 4 2. EUT DESCRIPTION .................................................................................................................... 5 3. TEST METHODOLOGY ............................................................................................................. 6 3.1 EUT CONFIGURATION.............................................................................................................. 6 3.2 EUT EXERCISE......................................................................................................................... 6 3.3 GENERAL TEST PROCEDURES.................................................................................................. 6 3.4 DESCRIPTION OF TEST MODES................................................................................................. 7 4. INSTRUMENT CALIBRATION................................................................................................. 8 4.1 MEASURING INSTRUMENT CALIBRATION........................................................................... 8 4.2 MEASUREMENT EQUIPMENT USED .............................................................................. 9 4.3 MEASUREMENT UNCERTAINTY .................................................................................. 10 5. FACILITIES AND ACCREDITATIONS ................................................................................. 11 5.1 FACILITIES............................................................................................................................ 11 5.2 EQUIPMENT........................................................................................................................... 11 5.3 TABLE OF ACCREDITATIONS AND LISTINGS.......................................................................... 12 6. SETUP OF EQUIPMENT UNDER TEST ................................................................................ 13 6.1 SETUP CONFIGURATION OF EUT............................................................................................ 13 6.2 SUPPORT EQUIPMENT..................................................................................................... 13 7. FCC PART 22 & 24 REQUIREMENTS ................................................................................... 14 7.1 99% BANDWIDTH ............................................................................................................. 14 7.2 PEAK POWER......................................................................................................................... 25 7.1 AVERAGE POWER............................................................................................................... 27 7.2 ERP & EIRP MEASUREMENT .......................................................................................... 29 7.3 OCCUPIED BANDWIDTH MEASUREMENT ................................................................. 33 7.4 OUT OF BAND EMISSION AT ANTENNA TERMINALS .............................................. 44 7.5 FIELD STRENGTH OF SPURIOUS RADIATION MEASUREMENT ............................. 62 7.6 FREQUENCY STABILITY V.S. TEMPERATURE MEASUREMENT.......................... 100 7.7 FREQUENCY STABILITY V.S. VOLTAGE MEASUREMENT .................................... 104 Compliance Certification Services Inc. FCC ID: RI7UE910NA IC: 5131A-UE910NA Report No.: T130225W02-RP Page 4 Rev.00 1. TEST RESULT CERTIFICATION Applicant: TELIT COMMUNICATIONS S.P.A. Via Stazione di Prosecco 5/b, 34010 SGONICO, TRIESTE - ITALY Equipment Under Test: 2G,3G wireless module Tr a d e N a m e : Telit Model Number: UE910-NAR, UE910-NAD Date of Test: March 11 ~ 23, 2013 APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR PART 22 SUBPART H AND PART 24 SUBPART E & IC RSS-132 Issue 3, January 2013 and IC RSS-133 Issue 6, January 2013 No non-compliance noted We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in TIA/EIA-603-C: 2004 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rule FCC PART 22 Subpart H and PART 24 Subpart E. The test results of this report relate only to the tested sample identified in this report. Approved by: Reviewed by: Miller Lee Gina Lo Section Manager Section Manager Compliance Certification Services Inc. Compliance Certification Services Inc. Compliance Certification Services Inc. FCC ID: RI7UE910NA IC: 5131A-UE910NA Report No.: T130225W02-RP Pag…

Text truncated - open the document above for the full version.

Bluetooth Qualification Test Facility (BQTF) FCC listed: A2LA Accredited IC recognized # 3462B-1 CETECOM Inc. 411 Dixon Landing Road  Milpitas, CA 95035  U.S.A. Phone: + 1 (408) 586 6200  Fax: + 1 (408) 586 6299  E-mail: [email protected]  http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2113686 Board of Directors: Dr. Harald Ansorge, Dr. Klaus Matkey, Hans Peter May V2.0 2009-10-30 The BLUETOOTH trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to CETECOM Inc. © Copyright by CETECOM FCC Test Report FOR: 3SI Security Systems Model Name: AT140704US Product Description: Asset Tracking and Alert Device FCC ID: Q6KAT140704A 47 CFR Part 90 TEST REPORT #: EMC-3SISE-038-14001_FCC_90 DATE: 2014-12-03 Report #: EMC-3SISE-038-14001-ATM_FCC_90 FCC ID: Q6KAT140704A Date : 2014-12-03 TABLE OF CONTENTS 1 Assessment. ____________________________________________________________________ 3 2 Administrative Data _____________________________________________________________ 4 2.1 Identification of the Testing Laboratory Issuing the EMC Test Report _____________________ 4 2.2 Identification of the Client __________________________________________________________ 4 2.3 Identification of the Manufacturer ___________________________________________________ 4 3 Equipment under Test (EUT) ______________________________________________________ 5 3.1 Specification of the Equipment under Test_____________________________________________ 5 3.2 Identification of the Equipment Under Test (EUT) ______________________________________ 6 3.3 Identification of Accessory equipment ________________________________________________ 6 4 Subject Of Investigation __________________________________________________________ 7 5 Measurements __________________________________________________________________ 8 5.1 Radiated Measurement Procedure ___________________________________________________ 8 Maximum Peak Output Power _____________________________________________________________ 9 5.1.1 References: _____________________________________________________________________________ 9 5.1.2 Limits _________________________________________________________________________________ 9 5.1.3 Test Result: _____________________________________________________________________________ 9 5.1.4 Test Plot ______________________________________________________________________________ 10 5.2 Occupied Bandwidth ______________________________________________________________ 11 5.2.1 References: ____________________________________________________________________________ 11 5.2.2 Limits: ________________________________________________________________________________ 11 5.2.3 Measurement Method. ___________________________________________________________________ 11 5.2.4 Test Result: ____________________________________________________________________________ 11 5.2.5 Test Data/plots: _________________________________________________________________________ 12 5.3 Modulation Characteristics ________________________________________________________ 13 5.4 Transmit Spectrum Mask __________________________________________________________ 13 5.4.1 Transmit Spectrum Mask FCC Part 90 _______________________________________________________ 13 5.5 Frequency Tolerance _____________________________________________________________ 15 5.5.1 219.6 MHz Be…

Text truncated - open the document above for the full version.