Q9SAWR2000V1TWO-WAY RADIO

TWO-WAY RADIO Model Name: AWR-ID Brand Name: ADVANCED WIRELESS COMMUNICATIONS FCC ID: Q9SAWR2000V1 SAFETY TRAINING INFORMATION Your Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications radio generators RF electromagnetic energy during transmit mode. This radio is designed for and classified as ͞KĐĐƵƉĂƚŝŽŶĂů Use KŶůLJ͕͟ meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the ͞'ĞŶĞƌĂů WŽƉƵůĂƚŝŽŶ͟ in an uncontrolled environment. This radio has been tested and complies with the FCC RF exposure limits for ͞KĐĐƵƉĂƚŝŽŶĂů Use KŶůLJ͘͟ Inaddition , your Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications radio complies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans: ᪽ FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. ᪽ American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. ᪽ American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields± RF and Microwave. ᪽ The following accessories are authorized for use with this product. Use of accessories other than those (listed in the instruction) specified may result in RF exposure levels exceed the FCC requirements for wireless RF exposure. To ensure LJŽƵ͛ƌĞLJŽƵƌexpose to RF electromagnetic energy is within the FCC allowable limits for occupational use, always adhere to the following guidelines: ᪽ DO NOT operate the radio without a proper antenna attached, as this may damaged the radio and may also cause you to exceed FCC RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or antenna specifically authorized by the manufacturer for use with this radio. ᪽ DO NOT WUDQVPLWVIRUPRUHWKDQRIWRWDOUDGLRXVHWLPH ³GXW\F\FOH ́ 7UDQVPLWWLQJPRUHWKDQRIWKH time can cause FCC RF exposure compliance requLUHPHQWVWREHH[FHHGHG7KHUDGLRLVWUDQVPLWWLQJZKHQWKH³7;LQGLFDWRU ́OLJKWVUHG <RXFDQFDXVHWKHUDGLRWRWUDQVPLWE\SUHVVLQJWKH³377 ́VZLWFK ᪽ ALWAYS keep the antenna at least 2.5 cm (1 inch) away from the body when transmitting and only use the belt-clip which is listed in instructions when attaching the radio to your belt, etc., to ensure FCC RF exposure compliance requirement s are not exceeded. To provide the recipients of your transmission the best sound quality, hold the antenna at least 5 cm (2 inches) from your mouth, and slightly off to one side. T he information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to asͲsure that this radio operates with the FCC RF exposure limits of this radio. Electromagnetic Interference/Compatibility During transmissions, your Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites. Occupational/Controlled Use The radio transmitter is used in situations in which persons are exposed as consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure.

Dec. 09, 2013 Federal Communication Commission Authorization and Evaluation Division FCC ID: Q9SAWR2000V1 Re: Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1: Block Diagram 2: Circuit Diagram 3: Operational Description 4: Parts List 5: Turn Up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rules 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications Contact person: Peter Blakeley Title: Vice President

Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications 20809 KENSINGTON BOULEVARD, LAKEVILLE, MN 55044-8353, USA Date: Dec. 09, 2013 Statement We, Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications states that our device, FCC ID: Q9SAWR2000V1, has no space to put the label except the battery compartment of this device. It is visible to the users as they purchase the products and install the battery. Regards Company: Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications Contact Person: Peter Blakeley Title: Vice President

External Photos WHOLE VIEW OF EUT TOP VIEW OF EUT BOTTOM VIEW OF EUT FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT

FCC ID Label Location FCC RF Warning Label TWO-WAY RADIO FCC ID: Q9SAWR2000V1 Model : AWR-ID Brand Name: ADVANCED WIRELESS COMMUNICATIONS Frequency Range: 450MHz to 470MHz HD-2000

Internal Photos OPEN VIEW‐1 OF EUT OPEN VIEW‐2 OF EUT INTERNAL VIEW‐1 OF EUT INTERNAL VIEW‐2 OF EUT INTERNAL VIEW‐3 OF EUT

Report No.:AGC00245130401FH01 Page 1 of 64 SAR Test Report Report No.: AGC00245130401FH01 FCC ID : Q9SAWR2000V1 IC : 4651A-AWRID Product Designation : TWO-WAY RADIO Brand Name : ADVANCED WIRELESS COMMUNICATIONS Model Name : AWR-ID, HD-2000 Client : Northfield Telecommunications Inc. d/b/a Advanced Wireless Communications Date of Issue : May 28, 2013 STANDARD(S) : FCC OET65 Supplement C June 2001 47CFR§2.1093 RSS102:2010 IEEE Std.1528-2013 REPORT VERSION : V1.0 Attestation of Global Compliance(Shenzhen) Co., Ltd. CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.:AGC00245130401FH01 Page 2 of 64 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / May 28, 2013 Valid Original Report Report No.:AGC00245130401FH01 Page 3 of 64 Test Report Certification Applicant Name Northfield Telecommunications Inc. d/b/a Advanced Wireless Communications Applicant Address 20809 KENSINGTON BOULEVARD, LAKEVILLE, MN 55044-8353, USA Manufacturer Name CHINA NEW CENTURY (QUANZHOU) COMMUNICATION ELECTRONICSCO., LTD. Manufacturer Address No. 1 Fengshou Road, Quanzhou City, Fujian Province, China Product Name TWO-WAY RADIO Brand Name ADVANCED WIRELESS COMMUNICATIONS Model Name AWR-ID, HD-2000 Difference Description All the models are the same, only different in model names. The test model is AWR-ID. EUT Voltage DC3.7V by battery Applicable Standard FCC OET65 Supplement C June 2001 47CFR§2.1093 RSS102:2010 IEEE Std.1528-2013 Test Date May 28, 2013 Test Results MAX SAR MEASUREMENT(1g) (with 50% duty cycle) Head: 0.219 W/Kg Body: 0.720 W/Kg (Maximum Scaling SAR=0.722 W/Kg) Performed Location Attestation of Global Compliance (Shenzhen)Co., Ltd. 2F, Building 2, No.1-No.4, Chaxi Sanwei Technical Industrial Park, Gushu, Xixiang Street, Bao'an District, Shenzhen, China Report Template AGCRT-EC-PPT2/SAR (2013-03-01) Documented By Vivi Zeng May 28, 2013 Checked By Angela Li May 28, 2013 Authorized By Solger Zhang May 28, 2013 Report No.:AGC00245130401FH01 Page 4 of 64 TABLE OF CONTENTS 1. GENERAL INFORMATION ............................................................................................................................................... 5 1.1. EUT Description .................................................................................................................................................... 5 1.2. Test Procedure ...................................................................................................................................................... 6 1.3. Test Environment ................................................................................................................................................. 6 2. SAR MEASUREMENT SYSTEM ........................................................................................................................................ 7 2.1. COMOSAR System Description ........................................................................................................................ 7 2.2. COMOSAR E-Field Probe ................................................................................................................................... 9 2.3 Robot ........................................................................................................................................................................ 9 2.4. Video Positioning System ................................................................................................................................ 10 2.5. Device Holder ...................................................................................................................................................... 10 2.6. Elliptic Phantom .................................................................................................................................................. 11 3. TISSUE SIMULATING LIQUID ........................................................................................................................................ 12 3.1. The composition of the tissue simulating liquid ......................................................................................... 12 3.2. Tissue Calibration Result ................................................................................................................................. 13 3.3. Tissue Dielectric Parameters for Head and Body Phantoms ................................................................... 14 4. SAR MEASUREMENT PROCEDURE ........................................................................................................................... 15 4.1. SAR System Validation ..................................................................................................................................... 15 4.2. SAR Measurement Procedure ......................................................................................................................... 17 5. SAR EXPOSURE LIMITS ................................................................................................................................................ 18 6. TEST EQUIPMENT LIST ................................................................................................................................................. 19 7. MEASUREMENT UNCERTAINTY .................................................................................................................................. 20 8. CONDUCTED POWER MEASUREMENT ...................................................................................................................... 21 9. TEST RESULTS .............................................................................................................................................................. 22 APPENDIX A. SAR SYSTEM VALIDATION DATA .........................................................…

Text truncated - open the document above for the full version.

Report No.: AGC00245130401F2 Page 1 of 45 FCC Part 90 & RSS-119 Test Report Report No.: AGC00245130401F2 FCC ID : Q9SAWR2000V1 IC 4651A-AWRID PRODUCT DESIGNATION : TWO-WAY RADIO BRAND NAME : ADVANCED WIRELESS COMMUNICATIONS MODEL NAME : AWR-ID, HD-2000 CLIENT : Northfield Telecommunications Inc. d/b/a Advanced Wireless Communications DATE OF ISSUE : Apr.23, 2013 STANDARD(S) : FCC Part 90 Rules RSS-119 Rules, RSS GEN REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd. CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC00245130401F2 Page 1 of 47 VERIFICATION OF COMPLIANCE Applicant: Northfield Telecommunications Inc. d/b/a Advanced Wireless Communications 20809 KENSINGTON BOULEVARD, LAKEVILLE, MN 55044-8353, USA Manufacturer: CHINA NEW CENTURY (QUANZHOU) COMMUNICATION ELECTRONICSCO., LTD. No. 1 Fengshou Road, Quanzhou City, Fujian Province, China Product Description: TWO-WAY RADIO Brand Name: ADVANCED WIRELESS COMMUNICATIONS Model Name: AWR-ID, HD-2000 Model Difference: All the same except for the appearance and the main test model is AWR-ID. File Number: AGC00245130401F2 Date of Test: Apr.17 to Apr.22, 2013 WE HEREBY CERTIFY THAT: The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C 63.4:2003. The sample tested as described in this report is in compliance with the FCC Rules Part 90 and RSS-119 requirements The test results of this report relate only to the tested sample identified in this report. Tested by Wall Huang Apr.23, 2013 Checked By Forrest Lei Apr.23, 2013 Authorized By Solger Zhang Apr.23, 2013 Report No.: AGC00245130401F2 Page 2 of 47 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................................... 4 1.1 PRODUCT DESCRIPTION ............................................................................................................ 4 1.2 RELATED SUBMITTAL(S) / GRANT (S) ........................................................................................ 5 1.3 TEST METHODOLOGY ................................................................................................................ 5 1.4 TEST FACILITY ............................................................................................................................. 5 1.5 SPECIAL ACCESSORIES ............................................................................................................. 5 1.6 EQUIPMENT MODIFICATIONS .................................................................................................... 5 2. SYSTEM TEST CONFIGURATION ....................................................................................................... 6 2.1 EUT CONFIGURATION ................................................................................................................. 6 2.2 EUT EXERCISE ............................................................................................................................. 6 2.3 GENERAL TECHNICAL REQUIREMENTS .................................................................................. 6 2.4 CONFIGURATION OF TESTED SYSTEM .................................................................................. 6 3. SUMMARY OF TEST RESULTS ........................................................................................................... 7 4. DESCRIPTION OF TEST MODES ........................................................................................................ 8 5. FREQUENCY TOLERANCE.................................................................................................................. 9 5.1 PROVISIONS APPLICABLE .......................................................................................................... 9 5.2 MEASUREMENT PROCEDURE ................................................................................................... 9 5.3 TEST SETUP BLOCK DIAGRAM ................................................................................................ 10 5.4 TEST EQUIPMENT USED: ......................................................................................................... 10 5.5 TEST RESULT ............................................................................................................................. 10 6. EMISSION BANDWIDTH ..................................................................................................................... 14 6.1 PROVISIONS APPLICABLE ........................................................................................................ 14 6.2 MEASUREMENT PROCEDURE ................................................................................................. 14 6.3 TEST SETUP BLOCK DIAGRAM ................................................................................................ 14 6.4 MEASUREMENT EQUIPMENT USED: ...................................................................................... 14 6.5 MEASUREMENT RESULT: .......................................................................................................... 15 7. UNWANTED RADIATION .................................................................................................................... 16 7.1 PROVISIONS APPLICABLE ........................................................................................................ 16 7.2 MEASUREMENT PROCEDURE ................................................................................................. 16 7.3 TEST SETUP BLOCK DIAGRAM ................................................................................................ 17 7.5 MEASUREMENT RESULTS:.............................................…

Text truncated - open the document above for the full version.

Te s t Setup Photos RADIATED TEST SETUP CONDUCTED EMISSION TEST SETUP