Q9SAWR4002DUTwo-way radio

AWR4002/AWR4000DU User manual Advanced wireless Communication THANK YOU! Thank you for your purchase of Advanced Wireless Communications’ AWR4002DU two-way radio. This portable two-way radio is a business grade device. Treat it with care, and you will enjoy years of reliable operation. MODEL(S) COVERED IN THIS MANUAL AWR4002DU /AWR400DU Two-way Radio Frequency: Model: AWR4002DU Part Number: ******(radio & battery cover only) AWR4000 Six-Unit Gang Charger Model: AWGC4000 Part Number: ****** Product Safety and RF Exposure for Portable Two-Way Radios Compliance with RF Energy Exposure Standards NOTICE: This radio is intended for use in occupational/controlled applications where users have been made aware of the potential for exposure and can exercise control over their exposure. This radio device is NOT authorized for general population, consumer or similar use. BEFORE USING THIS RADIO, READ THE TRAINING MATERIAL BELOW WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL INFORMATION FOR COMPLIANCE WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL STANDARDS. Federal Communication Commission (FCC) Regulations The FCC has established limits for safe exposure to radio frequency (RF) emissions from portable two-way radios. The FCC requires manufacturers to demonstrate compliance with RF exposure limits before portable two-way radios can be marketed in the U.S. When two-way radios are approved for occupational/controlled environment exposure limits, the FCC requires users to be fully aware of, and exercise control over, their exposure. Awareness and control of RF exposure can be accomplished by the use of labels, or by education and training through appropriate means such as information and instructions in user manuals or safety booklets. Your Advanced Wireless Commu- nications’ two-way radio has an RF exposure information label in the battery compartment. The training material below includes useful information about RF exposure and helpful instructions on how to control your RF exposure. Your Advanced Wireless Communications two-way radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to RF electromagnetic energy. In terms of measuring RF energy for compliance with FCC exposure guidelines, your radio radiates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. Compliance and Control Guidelines and Operating Instructions for Portable Two-Way Radios To control your exposure and ensure compliance with the occupational/con- trolled environment exposure limits, always adhere to the following procedures: *Transmit no more than 50% of the time. To transmit (talk), push the PushTo-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50% of the time or less is important since the radio generates measurable RF energy exposure only when transmitting (in terms of measuring standards compliance). *For body-worn operation, always place the radio in an AWC approved belt-clip or similar accessory that contains no metallic components and provides a minimum separation distance of 0 cm between the back of the radio and the user’s body. AWC approved accessories, antennas, and device combinations comply with the occupational/controlled environment RF exposure limits. Using non-AWC approved accessories may result in exposure levels which exceed the FCC’s occupational/controlled environment RF exposure limits. AWC-approved accessories have been tested and comply with FCC RF exposure requirements. *If you are not using a body-worn accessory and are not using the radio held in front of the face, ensure the radio is kept at a minimum of 2.5 cm from the body when transmitting. Keeping the radio at a proper distance is important since RF exposure decreases with increasing distance from the antenna. * Use only FCC-approved, supplied or replacement headsets, batteries, and accessories intended for use with this radio. Use of non-FCC approved headsets, batteries and accessories may exceed FCC RF exposure guidelines. FCC License Information Your Advanced Wireless Communications radio operates on communications frequencies which are subject to FCC (Federal Communications Commission) Rules & Regulations. FCC Rules require that all operators using Private Land Mobile radio frequencies obtain a radio license before operating their equipment. Application for license must be made on FCC form 601, and schedules D, E, and G. FAX: Forms can be obtained by fax from the FCC Fax-On-Demand system. Call 1-202- 418-0177 from your fax machine and request document number 000600 for the form, schedules, and instructions. MAIL: Forms can be ordered by telephone, and will be sent to you by first class mail. Call the FCC Forms Hotline at 1-800-418-FORM (1-800-418-3676). INTERNET: Form 601 and instructions can be downloaded from the FCC Forms website at: http://www.fcc.gov/Forms/Form601/601.html Before filling out your Form 601 application Technical Data section, you must decide which frequency (or frequencies) you will operate on. Questions? Call the FCC for license application questions at 1-888-CALL-FCC (1-888- 225-5322). If you have any questions, call Advanced Wireless Communications at 1-800475-5852 Notices to The User This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. One or more of the following statements may be applicable: FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the auth…

Text truncated - open the document above for the full version.

Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications 20809 Kensington Blvd. Lakeville MN 55044 United States Of America Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jan. 09, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: Q9SAWR4002DU [Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) Name: Kenneth J Coons Title: President

Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications 20809 Kensington Blvd. Lakeville MN 55044 United States Of America Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jan. 09, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: Q9SAWR4002DU [Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) Name: Kenneth J Coons Title: President

Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications 20809 Kensington Blvd. Lakeville MN 55044 United States Of America 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process FCC ID: Q9SAWR4002DU 2.911(d)(7) USA Designated Agent for Service of Process We, [Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications] (“the applicant”) designate [Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent & Applicant Company name: Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications Address: 20809 Kensington Blvd. Lakeville MN 55044 United States Of America Contact Name: Kenneth J Coons Telephone No: 952-469-0122 Email: [email protected] FRN: 0008725376 Signature: Date: Jan. 09, 2024 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-comm unications-supply-chain-through-the

Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications 20809 Kensington Blvd. Lakeville MN 55044 United States Of America Agent Authorization Company: Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications Address: 20809 Kensington Blvd. Lakeville MN 55044 United States Of America Product Name: Two-way radio Model Number(s): AWR4002DU, AWR4000DU Product Description: Two-way radio We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jan. 09, 2024 Name: Kenneth J Coons Title: President Company: Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications

Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications 20809 Kensington Blvd. Lakeville MN 55044 United States Of America Jan. 09, 2024 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : Q9SAWR4002DU Model Number: AWR4000DU, AWR4002DU To Whom It May Concern: We, The Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications hereby declare that the models are identical except the appearance of the color and model name. Except for the different above, no other modification is performed. Sincerely, Signature: Contact person: Kenneth J Coons

Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications 20809 Kensington Blvd. Lakeville MN 55044 United States Of America Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jan. 09, 2024 Subject; Request for Confidentiality FCC ID: Q9SAWR4002DU To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Kenneth J Coons Title: President

Report No.: AGC09626231201AP02 Page 1 of 8 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC09626231201AP02 Page 2 of 8 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC09626231201AP02 Page 3 of 8 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC09626231201AP02 Page 4 of 8 RIGHT VIEW OF EUT THE MODEL NAME OF AWR4002DU TOP VIEW OF EUT Report No.: AGC09626231201AP02 Page 5 of 8 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC09626231201AP02 Page 6 of 8 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC09626231201AP02 Page 7 of 8 RIGHT VIEW OF EUT CHARGER OF EUT Report No.: AGC09626231201AP02 Page 8 of 8 ADAPTER OF EUT ****************************************End of Report*************************************

FCC ID Label Location 30mm*30mm FCC ID: Q9SAWR4002DU

Report No.: AGC09626231201AP02 Page 1 of 18 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC09626231201AP02 Page 2 of 18 OPEN VIEW OF EUT (FIGURE 3) OPEN VIEW OF EUT (FIGURE 4) Report No.: AGC09626231201AP02 Page 3 of 18 OPEN VIEW OF EUT (FIGURE 5) INTERNAL VIEW OF EUT (FIGURE 1) Antenna Report No.: AGC09626231201AP02 Page 4 of 18 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC09626231201AP02 Page 5 of 18 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) Report No.: AGC09626231201AP02 Page 6 of 18 INTERNAL VIEW OF EUT (FIGURE 6) INTERNAL VIEW OF EUT (FIGURE 7) Report No.: AGC09626231201AP02 Page 7 of 18 INTERNAL VIEW OF EUT (FIGURE 8) INTERNAL VIEW OF EUT (FIGURE 9) BT Antenna Report No.: AGC09626231201AP02 Page 8 of 18 INTERNAL VIEW OF EUT (FIGURE 10) INTERNAL VIEW OF EUT (FIGURE 11) Report No.: AGC09626231201AP02 Page 9 of 18 INTERNAL VIEW OF EUT (FIGURE 12) INTERNAL VIEW OF EUT (FIGURE 13) Report No.: AGC09626231201AP02 Page 10 of 18 THE MODEL NAME OF AWR4002DU OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC09626231201AP02 Page 11 of 18 OPEN VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 1) Antenna Report No.: AGC09626231201AP02 Page 12 of 18 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC09626231201AP02 Page 13 of 18 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) Report No.: AGC09626231201AP02 Page 14 of 18 INTERNAL VIEW OF EUT (FIGURE 6) INTERNAL VIEW OF EUT (FIGURE 7) BT Antenna Report No.: AGC09626231201AP02 Page 15 of 18 INTERNAL VIEW OF EUT (FIGURE 8) INTERNAL VIEW OF EUT (FIGURE 9) Report No.: AGC09626231201AP02 Page 16 of 18 INTERNAL VIEW OF EUT (FIGURE 10) INTERNAL VIEW OF EUT (FIGURE 11) Report No.: AGC09626231201AP02 Page 17 of 18 INTERNAL VIEW OF EUT (FIGURE 12) INTERNAL VIEW OF EUT (FIGURE 13) Report No.: AGC09626231201AP02 Page 18 of 18 BATTERY OF EUT ****************************************End of Report*************************************

Page 1 of 22 FCC Test Report Report No.: AGC09626231201FE01 FCC ID : Q9SAWR4002DU APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Two-way radio BRAND NAME : AWC MODEL NAME : AWR4000DU, AWR4002DU APPLICANT : Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications DATE OF ISSUE : Jan. 09, 2024 STANDARD(S) : FCC Part 15 Subpart B REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC09626231201FE01 Page 2 of 22 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jan. 09, 2024 Valid Initial Release Report No.: AGC09626231201FE01 Page 3 of 22 TABLE OF CONTENTS 1. GENERAL INFORMATION .............................................................................................................................. 4 2. PRODUCT INFORMATION .............................................................................................................................. 5 2.1 PRODUCT TECHNICAL DESCRIPTION ................................................................................................ 5 2.2 AUXILIARY SURROUNDING DESCRIPTION ........................................................................................ 5 2.3 TEST METHODOLOGY .......................................................................................................................... 6 2.4 DEFINITION OF DEVICE CLASSIFICATION ......................................................................................... 6 2.5 DESCRIPTION OF TEST MODES .......................................................................................................... 6 3. TEST ENVIRONMENT ..................................................................................................................................... 7 3.1 ADDRESS OF THE TEST LABORATORY .............................................................................................. 7 3.2 TEST FACILITY ....................................................................................................................................... 7 3.3 ENVIRONMENTAL CONDITIONS........................................................................................................... 8 3.4 MEASUREMENT UNCERTAINTY .......................................................................................................... 8 3.5 LIST OF EQUIPMENTS USED ............................................................................................................... 9 4. SUMMARY OF TEST RESULTS .................................................................................................................... 10 5. RADIATED EMISSION MEASUREMENTS ................................................................................................... 11 5.1 PROVISIONS APPLICABLE .................................................................................................................. 11 5.2 MEASUREMENT SETUP ...................................................................................................................... 11 5.3 MEASUREMENT PROCEDURE ........................................................................................................... 12 5.4 MEASUREMENT RESULT .................................................................................................................... 14 6. CONDUCTED EMISSION MEASUREMENTS ............................................................................................... 18 6.1 PROVISIONS APPLICABLE .................................................................................................................. 18 6.2 MEASUREMENT SETUP ...................................................................................................................... 18 6.3 MEASUREMENT PROCEDURE ........................................................................................................... 19 6.4 MEASUREMENT RESULT .................................................................................................................... 20 APPENDIX I: PHOTOGRAPHS OF TEST SETUP ............................................................................................ 22 APPENDIX II: PHOTOGRAPHS OF TEST EUT ............................................................................................... 22 Report No.: AGC09626231201FE01 Page 4 of 22 1. GENERAL INFORMATION Applicant Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications Address 20809 Kensington Blvd. Lakeville MN 55044 United States Of America Manufacturer Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications Address 20809 Kensington Blvd. Lakeville MN 55044 United States Of America Factory Shenzhen Surwave Technologies Co., LTD Address Huolibao Building West, No31, Gaoxinbei Rd.6, Hi-Tech Industral Park, Nanshan District, Shenzhen, China Product Designation Two-way radio Brand Name AWC Test Model AWR4000DU Series Model(s) AWR4002DU Difference Description Different colors and model names Date of receipt of test item Dec. 14, 2023 Date of Test Dec. 14, 2023~Jan. 09, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCTR-ER-FCC-SDOC V1.0 The above equipment was tested by Attestation Of Global Compliance (Shenzhen) Co., Ltd. for compliance with the requirements set forth in the FCC Rules and Regulations Part 15, the measurement procedure according to ANSI C63.4:2014. This said equipment in the configuration described in this report shows the maximum emission levels emanating from equipment are within the compliance requirements. The test results of this report relate only to the tested sample identified in this report. Prepared By Bibo Zhang (Project Engineer) Jan. 09, 2024 Reviewed By Calvin Liu (Reviewer) Jan. 09, 2024 Approved By Max Zhang Authorized Officer Jan. 09, 2024 Report No.: AGC09626231201FE01 Page 5 of 22 2. PRODUCT INFORMATION 2.1 PRODU…

Text truncated - open the document above for the full version.

Report No.: AGC09626231201AP03 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC09626231201AP03 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP ****************************************End of Report*************************************