QAM007Interactive Whiteboard with Radio Link

ACTIVboard Quick Start Guide PC and Mac™ US Edition TP-1469-US Issue 6 ACTIVboard Quick Start Guide PC and Mac™ US Edition TP-1469-US Issue 6 All rights reserved All information contained in this document is subject to change without notice. Any use of the contents of this User Manual other than for the purpose intended requires ex press written pe rmission of Promethean Technologies Group Ltd. All trademarks noted with the ™ mark are the properties of their respective companies. NOTE: All utility and driver software provided to operate ACTIV products is the property of Promethean. Use of this software is granted for the purpose of insta llation, set up and operation of ACTIV products and the standard feature set outlined in this guide. Promethean does not en courage or authorize any other use. Additional application software is provided from time to time as a service to our customers. This soft ware is licensed to the end user by the supplier. Use, posse ssion and upgrades are the responsibility of that supplier. Registered owners of Promethean product should contact those su ppliers directly for support. ATTRIBUTION: The Bluetooth ® word, mark and logos are owned by the Bluetooth SIG, Inc. an d any use of such marks by Promethean Technologies Grou p Ltd is under license. Other trademarks and trade names are th ose of their respective owners. © Copyright Promethean Technologies Group Ltd 2006 All rights reserved All information contained in this document is subject to change without notice. Any use of the contents of this User Manual other than for the purpose intended requires ex press written pe rmission of Promethean Technologies Group Ltd. All trademarks noted with the ™ mark are the properties of their respective companies. NOTE: All utility and driver software provided to operate ACTIV products is the property of Promethean. Use of this software is granted for the purpose of insta llation, set up and operation of ACTIV products and the standard feature set outlined in this guide. Promethean does not en courage or authorize any other use. Additional application software is provided from time to time as a service to our customers. This soft ware is licensed to the end user by the supplier. Use, posse ssion and upgrades are the responsibility of that supplier. Registered owners of Promethean product should contact those su ppliers directly for support. ATTRIBUTION: The Bluetooth ® word, mark and logos are owned by the Bluetooth SIG, Inc. an d any use of such marks by Promethean Technologies Group Ltd is under license. Other trademarks and trade names are th ose of their respective owners. © Copyright Promethean Technologies Group Ltd 2006 ACTIVboard Quick Start Guide 1 Table of Contents Safety Inst ructions................................................................ 2 Safety No tices ................................................................. 2 Compliance.......................................................................... 4 For More Info rmation ............................................................ 5 Technical Support ............................................................ 5 User Fo rum..................................................................... 5 Updates.......................................................................... 5 1. Installing the Software ..................................................... 6 On a Windows Ba sed Comp uter ......................................... 6 On a Macintos h Computer ................................................. 6 2. Prepare the AC TIVboard ................................................... 7 Serial Connection............................................................. 7 USB Connection............................................................... 8 Connection enabled via Bluetooth Wireless Technology............ 9 Note about the latc hing conne ctor .....................................10 3. Prepare the ACTIVboard for Bluetooth Connectivity .............11 On a Windows Ba sed Computer ........................................11 Establish Bluetoot h Connection..................................11 Connect to the ACTIVboard.......................................13 Start the ACTI Vdriver...............................................14 Name the ACTI Vboard..............................................15 On a Macintos h Computer ................................................16 Set up the device ....................................................16 Name the AC TIVboard..............................................17 4. Calibrate the ACTIVboard ................................................18 5. Launch the So ftware.......................................................19 On a Windows Ba sed Computer ........................................19 On a Macintos h Computer ................................................19 ACTIVboard Quick Start Guide 1 Table of Contents Safety Inst ructions................................................................ 2 Safety No tices ................................................................. 2 Compliance.......................................................................... 4 For More Info rmation ............................................................ 5 Technical Support ............................................................ 5 User Fo rum..................................................................... 5 Updates.......................................................................... 5 1. Installing the Software ..................................................... 6 On a Windows Ba sed Comp uter ......................................... 6 On a Macintos h Computer ................................................. 6 2. Prepare the AC TIVboard ................................................... 7 Serial Connection............................................................. 7 USB Connection.........................................................…

Text truncated - open the document above for the full version.

PC and Mac™ US Edition TP-1484-US Issue 3 proACTIV board User Guide All rights reserved All information contained in this document is subject to change without notice. Any use of the contents of this User Manual other than for the purpose intended requires express written permission of Promethean Technologies Group Ltd. All trademarks noted with the ™ mark are the properties of their respective companies. NOTE: All utility and driver software provided to operate ACTIV products is the property of Promethean. Use of this software is granted for the purpose of installation, set up and operation of ACTIV products and the standard feature set outlined in this guide. Promethean does not encourage or authorize any other use. Additional application software is provided from time to time as a service to our customers. This software is licensed to the end user by the supplier. Use, possession and upgrades are the responsibility of that supplier. Registered owners of Promethean product should contact those suppliers directly for support. © Copyright Promethean Technologies Group Ltd 2005 proACTIV board User Guide iii Table of Contents Introduction ......................................................................................1 About this guide..........................................................................1 For More Information ...................................................................1 User Group Forum ................................................................1 Online Help .........................................................................1 Support and Information .......................................................2 Updates ..............................................................................2 Compliance .......................................................................................2 Health and Safety Precautions..............................................................3 Hazardous Material ......................................................................3 Power Supply..............................................................................3 Environmental Considerations ..............................................................3 Mains Electrical Supply........................................................................3 Installation ........................................................................................4 Safety Notices ............................................................................4 proACTIV board Installation Options...............................................5 Wall Mounting......................................................................5 Portable Stand .....................................................................6 Software Installation....................................................................7 Electrical Connections ..................................................................7 Extending the Interface Cable .......................................................7 Serial .................................................................................7 USB ...................................................................................7 Operation..........................................................................................8 Safety Notices ............................................................................8 Projector ....................................................................................9 Recommendations ................................................................9 Preparation .........................................................................9 Framing the Screen Image ....................................................9 Additional LCD Projector Adjustment .......................................9 ACTIVpen................................................................................. 10 Changing the ACTIVpen tip .................................................. 10 Calibrating the proACTIV board .......................................................... 11 Maintenance & Cleaning .................................................................... 12 proACTIV board User Guide iv proACTIV board User Guide 1 Introduction About this guide This user guide will help you install, set up and operate your proACTIV board system. Should you require information about installing your software or making electrical connections, refer to the Quick Start Guide supplied with your product. Other documentation and text files relating to your system are included on your installation CD in PDF format. In order to view this documentation you must install the Adobe Acrobat reader, which is also available on the installation CD. For More Information User Group Forum http://www.prometheanworld.com/common/html/vb_forum/index.php The User Group forum allows you to post discussion topics and share information surrounding the use of the proACTIV board with other users. You will be asked to register your details to become a member when you visit the forum. You are encouraged to join and visit the forum regularly for news about updates to the ACTIV range of products, software and resources. Online Help The software application includes complete documentation in an accessible online help system. This includes information on all of the tools and features. Accessing Online Help Do one of the following: • Click the Help... button from the Did You Know window, which is displayed when the software opens. • In ACTIVstudio2, access the menu and select Help...> then select one of the Help items. In ACTIVprimary2, click on Teacher Tools Menu button > Menu... > Help.... The online help will open in a new window. The format is designed to allow easy navigation so you can view each topic using the contents list, or find information about a specific topic by using the index or search options. proACTIV board User Guide 2 Support and Information Telephone: …

Text truncated - open the document above for the full version.

FCC ID QAM007 IC: 5459A-007 © Not to be reproduced without the permission of TÜV Product Service Limited. Page 1 of 3 PHOTOGRAPHS OF EQUIPMENT FOR PROMETHEAN WIDESCREEN ACTIVBOARD PHOTOGRAPHS OF EQUIPMENT Widescreen ActivBoard – Front View FCC ID QAM007 IC: 5459A-007 © Not to be reproduced without the permission of TÜV Product Service Limited. Page 2 of 3 PHOTOGRAPHS OF EQUIPMENT Widescreen ActivBoard – Rear View FCC ID QAM007 IC: 5459A-007 © Not to be reproduced without the permission of TÜV Product Service Limited. Page 3 of 3 PHOTOGRAPHS OF EQUIPMENT Widescreen ActivBoard – External View Radio Section

Photographs of Bluetooth Module Component View Component view (modified for test With antenna connector) Rear view Rear view

72 CHIP ANTENNAS 244ST01AHD1403  Part number system  Part number list 13.5 3.0 3.0 AHD1403-244ST t=0.8 AHD1403-191ST t=0.8 AHD1403-158ST t=1.6 AHD1103-244ST t=0.8 1.00.32.01.0 AHD1403 Series  Characteristics (Reference)  Dimensions T T : Taping B : Bulk 10.5 1.00.32.01.0 AHD1103 Series Surface mountable dielectric chip antennas AHD series is a result of harmon- izing our long experience in ceramic material & process technologies for high frequency applications together with cutting-edge RF design technologies. It is very small with low profile, but has a wide range of frequency band. It is suitable for compact mobile equipment and communication modules. · Very small and thin, omni-directional antenna. · Due to its compact size, suitable for equipment like cellular phone with a limited mounting space. · Suitable for card shaped equipment due to its low profile. · Wide frequency band allows a big margin to cover the required range even in case of center frequency shift with mounting condition and other environ- mental factors. · Wireless LAN, BluetoothÔ etc. · PHS, DECT · GPS Center Frequency OptionSeries1GHz100MHz10MHzControl Code  Features  Applications Operating Temperature 25 85 °C24002484MHz13.530.8mm AHD1403 244ST01 Linear 25 85°C15651585MHz13.531.6mm AHD1403 158ST01 Linear 25 85°C24002484MHz10.530.8mm AHD1103 244ST01 Linear 25 85°C18801920MHz13.530.8mm AHD1403 191ST01 Linear PolarizationOperating Frequency RangeSizesPart Number Average GainPeak GainBandwidth in VSWR3 3.8dBd 0.5dBd230MHzAHD1403 244ST01 4.7dBd 1.3dBd 130MHzAHD1403 191ST01 5.3dBd 1.9dBd 90MHzAHD1403 158ST01 4.8dBd 1.0dBd 200MHzAHD1103 244ST01 Part Number Packing form Unit : mm tol : 0.2mm Unit : mm tol : 0.2mm NEW NEW 73 CHIP ANTENNAS  Characteristics of AHD1403-158ST01  Characteristics of AHD1103-244ST01 In case of surface mount antennas, the center frequency is dependent on the PCB size or other surrounding components and materials, and therefore can be different from what is measured with our standard test board. For the AHD series , we have therefore prepared series of items having different center fre- quencies with a certain frequency step, in order to cancel the above men- tioned frequency shift by the environmental factors. So with our AHD series, you can easily and quickly find the most suitable an- tenna for your own mounting conditions. Series of center Frequencies  Characteristics of AHD1403-244ST01  Characteristics of AHD1403-191ST01  Packing form Unit : mm Packing form Packing code Related series Packing Qty. AHD1403 AHD1103 MZA1603 4,000 A E D B W2 W1 P1 B W F E A P0 A 33080 RRM08B B 21 2.0 24.2 2 0 30.4 R1 DEW 1W2r Rectangular hole Outfeeding direction Circular feed hole Rectangular hole for part loading Code A 3.3 0.1 13.8 0.1 AHD1403 B 1.75 0.1 11.5 0.1 4.0 0.1 8.0 0.1 24 0.3 Rectangular hole 3.3 0.1 10.8 0.1 AHD1103 1.75 0.1 11.5 0.1 4.0 0.1 8.0 0.1 24 0.3 Rectangular hole 3.4 0.1 16.4 0.1 MZA1603 1.75 0.1 11.5 0.1 4.0 0.1 8.0 0.1 24 0.3 EFP0P1W Loading hole T r 0 0 [ dBd ] -10 -20 -30 -40 180 33030 30060 27090 240120 210150 0 -5 -10 -15 -20 -25 -30 22.12.22.32.42.52.62.72.8 0 0 [ dBd ] -10 -20 -30 -40 180 33030 30060 27090 240120 210150 0 -5 -10 -15 -20 -25 -30 22.12.22.32.42.52.62.72.8 0 0 [ dBd ] -10 -20 -30 -40 180 33030 30060 27090 240120 210150 0 -5 -10 -15 -20 -25 -30 22.12.22.32.42.52.62.72.8 0 0 [ dBd ] -10 -20 -30 -40 180 33030 30060 27090 240120 210150 0 -5 -10 -15 -20 -25 -30 22.12.22.32.42.52.62.72.8 ReturnLoss(dB) Frequency(GHz) ReturnLoss(dB) Frequency(GHz) ReturnLoss(dB) Frequency(GHz) ReturnLoss(dB) Frequency(GHz) NEW 74 DISC TYPE CERAMIC CAPACITOR 300500MHZ more than 3%less than 1.2 Part numberOperating Frequency Range Bandwidth in VSWR2.5 VSWR at fc MZA 1603 Option Packing form Termination P : Ni/Sn Barriar Size  Characteristics Top viewBottom view 16.0 1.5 3.0 The MZA 1603 is targeted at applications in the frequency range of 300- 500MH Z. This antenna is designed by merging our ceramic and high frequen- cy wireless circuitry technologies. High gain is realized with a ceramic chip antenna whose dimensions are only 16.03.01.5mm in a frequency range in which corresponding wave length is 600-1000mm. · Compact, omni-directional antenna. · By using an external impedance matching circuit, it is possible to optimize the antenna properties in the frequency spectrum of 300-500MHZ. · TOKUSHO Regulations, BIJAKU Regulations (japan) · FCC Part.15 (America) · EN300 200-1 (Europe) Series  Radiation Pattern of MZA1603  VSWR Characteristic of MZA1603  Dimensions(mm)  Features  Regulations Telemeter (Industrial &medical use), Telecontroller, Data communications, Keyless entry systems, Car security systems and Voice communication terminals.  Applications MZA1603PT  Part number system Frequency. [MHz] 180 ° 0 ° 210 ° 150 ° 330 ° 30 ° 240 ° 120 ° 414424434444454 300 ° 60 ° Max= 0.40 dBi Ave= -2.91 dBi Min= -37.93 dBi Max= -0.22 dBi Ave= -0.53 dBi Min= -1.05 dBi 90 ° 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 270 ° VSWR T : Taping B : Bulk 1010 00 -10-10 -20-20 -30-30 -40-40 -50-50 424.6794MHZ424.6794MHZ447.7037MHZ447.7037MHZ 23.02MHZ23.02MHZ

FCC ID: QAM007 IC: 5459A-007 © Not to be reproduced without the permission of TÜV Product Service Limited. Page 1 of 1 ANTENNA PHOTOGRAPH OF EQUIPMENT FOR PROMETHEAN ACTIVBOARD PHOTOGRAPHS OF EQUIPMENT ActivBoard PCB – Front Internal View Antenna Locations Antenna Tracks

REPORT ON Limited FCC CFR 47: Part 15 and Industry Canada RSS-210 and RSS-Gen Testing of a Promethean Widescreen ACTIVBoard with Bluetooth Radio FCC ID: QAM007 IC: 5459A-007 COMMERCIAL-IN-CONFIDENCE Report No OO200364/01 Issue 2 July 2006 Competence. Certainty. Quality COMMERCIAL-IN-CONFIDENCE TUV Product Service Ltd, Octagon House, Concorde Way, Segensworth North, Fareham, Hampshire, United Kingdom, PO15 5RL Tel: +44 (0) 1489 558100. Website: www.tuvps.co.uk ; www.babt.com Report Number OO200364/01 Issue 2 Page 1 of 69 COMMERCIAL-IN-CONFIDENCE REPORT ON Limited FCC CFR 47: Part 15 and Industry Canada RSS-210 and RSS-Gen Testing of a Promethean Widescreen ACTIVBoard with Bluetooth Radio Report No OO200364/01 Issue 2 July 2006 FCC ID QAM007 IC ID IC: 5459A-007 PREPARED FOR Promethean Technologies Group Limited Promethean House Lower Philips House Blackburn BB1 5TH PREPARED BY J Plummer APPROVED BY K Adsetts M Jenkins Authorised Signatory Authorised Signatory DATED 20 th July 2006 This report has been re-issued as Issue 2 to correct the specification date. The Test Results are unaffected. ENGINEERING STATEMENT The measurements shown in this report were made in accordance with the procedures described on test pages. All reported testing was carried out on a sample equipment to demonstrate limited compliance with FCC CFR 47: Part 15. The sample tested was found to comply with the requirements defined in the applied rules. Test Engineers; S Hartley A Guy G Lawler M Hardy FCC ID: QAM007 IC ID: 5459A-007 COMMERCIAL-IN-CONFIDENCE Report Number OO200364/01 Issue 2 Page 2 of 69 COMMERCIAL-IN-CONFIDENCE CONTENTS Section Page No 1 REPORT SUMMARY 1.1 Status .................................................................................................................................. 4 1.2 Introduction.......................................................................................................................... 5 1.3 Brief Summary of Results ................................................................................................... 7 1.4 Product Information............................................................................................................. 8 1.5 Test Conditions ................................................................................................................... 9 1.6 Deviations from the Standard............................................................................................. 9 1.7 Modification Record ............................................................................................................ 9 2 TEST DETAILS FCC Part 15 C, Industry Canada RSS-210 2.1 Measurement at the Band Edge ......................................................................................... 11 2.2 Conducted Emissions on Power Port ................................................................................. 13 2.3 20dB Bandwidth................................................................................................................... 20 2.4 Channel Dwell Time (DH1) .................................................................................................. 31 2.5 Channel Dwell Time (DH3) .................................................................................................. 33 2.6 Channel Dwell Time (DH5) .................................................................................................. 36 2.7 Channel Separation ............................................................................................................. 39 2.8 Number of Hopping Channels............................................................................................. 41 2.9 Maximum Peak Output Power ............................................................................................. 46 2.10 Spurious Conducted Emissions........................................................................................... 48 2.11 Spurious Radiated Emissions (Enclosure Port).................................................................... 58 2.12 Maximum and Peak Output Power (Radiated) EIRP............................................................ 62 3 TEST EQUIPMENT 3.1 Test Equipment ................................................................................................................... 65 3.2 Measurement Uncertainty ................................................................................................... 67 4 ACCREDITATION, DISCLAIMERS AND COPYRIGHT 4.1 Accreditation, Disclaimers and Copyright ........................................................................... 69 FCC ID: QAM007 IC: 5459A-007 COMMERCIAL-IN-CONFIDENCE Report Number OO200364/01 Issue 2 Page 3 of 69 COMMERCIAL-IN-CONFIDENCE SECTION 1 REPORT SUMMARY Limited FCC CFR 47: Part 15 and Industry Canada RSS-210 and RSS-Gen Testing of a Promethean Widescreen ACTIVBoard with Bluetooth Radio FCC ID: QAM007 IC: 5459A-007 COMMERCIAL-IN-CONFIDENCE Report Number OO200364/01 Issue 2 Page 4 of 69 COMMERCIAL-IN-CONFIDENCE 1.1 STATUS Equipment Under Test Widescreen ACTIVBoard with Bluetooth Radio Objective To undertake measurements to determine the Equipment Under Test's (EUT's) compliance with the specification. Applicant Promethean Technologies Group Limited Promethean House Lower Philips House Blackburn BB1 5TH Manufacturers Type Number PRM-AB295B-06 Manufacturers Part Number PRM-AB295B-06 Serial Number N/A Engineering Sample (with Production Electronics) Hardware Version 1.0 Software Version ACTIVboard Firmware Version 3.60 Declared Variants None Test Specification/Issue/Date FCC CFR 47: Part 15, Subpart C: 2006 RSS-210: Issue 6: 2005 RSS-Gen: Issue 2: 2005 Number of Items Tested One Security Classification of EUT Commercial-in-Confidence Incoming Release Declaration of Build Status Date 19 th June 2006 Disposal Held pending disposal Order Number P16457 Date 1 st June 2006 Start of Test 24 th June 2006 Finish of Test 3 rd July 2006 Rela…

Text truncated - open the document above for the full version.

FCC ID QAM007 IC: 5459A-007 © Not to be reproduced without the permission of TÜV Product Service Limited. Page 1 of 5 TEST SET-UP PHOTOGRAPHS FOR PROMETHEAN WIDESCREEN ACTIVBOARD TEST SET-UP PHOTOGRAPHS EUT Electronics FCC ID QAM007 IC: 5459A-007 © Not to be reproduced without the permission of TÜV Product Service Limited. Page 2 of 5 TEST SET-UP PHOTOGRAPHS EUT Electronics In-Situ FCC ID QAM007 IC: 5459A-007 © Not to be reproduced without the permission of TÜV Product Service Limited. Page 3 of 5 PHOTOGRAPHS OF EQUIPMENT Radiated Emissions FCC ID QAM007 IC: 5459A-007 © Not to be reproduced without the permission of TÜV Product Service Limited. Page 4 of 5 PHOTOGRAPHS OF EQUIPMENT Radiated Emissions FCC ID QAM007 IC: 5459A-007 © Not to be reproduced without the permission of TÜV Product Service Limited. Page 5 of 5 PHOTOGRAPHS OF EQUIPMENT Conducted Emissions