QC8-RDL3000RMDBroadband wireless infrastructure product

RDL-3000 M2M Solutions 70-00184-06-00a Proprietary Redline Communications © 2013 Page 1 of 20 December 9, 2013 RDL-3000 Family Broadband Wireless Systems RDL-3000-RMD Radio Module Product Manual 1 Product Overview ................................................................... 5 2 Conditions of Use ................................................................... 6 3 Module Installation and Service ............................................ 8 4 Final Product Requirements ................................................ 10 RDL-3000 FAMILY RDL-3000-RMD PRODUCT MANUAL 70-00184-06-00a Proprietary Redline Communications © 2013 Page 2 of 20 December 9, 2013 Copyright Information All rights reserved December 9, 2013. The information in this document is proprietary to Redline Communications Inc. This document may not in whole or in part be copied, reproduced, or reduced to any medium without prior consent, in writing, from Redline Communications Incorporated. Contact Information: Redline Communications Inc. 302 Town Centre Blvd. Markham, ON Canada L3R 0E8 Web site: http://www.rdlcom.com Email: Inquiries: [email protected] Support: [email protected] Training: [email protected] Document Control: 70-00184-06-00-RDL-3000-RMD_Product_Manual-20131209b.doc Disclaimer The statements, configurations, technical data, and recommendations in this document are believed to be accurate and reliable, but are presented without express or implied warranty. Additionally, Redline makes no representations or warranties, either expressed or implied, regarding the contents of this product. Redline Communications shall not be liable for any misuse regarding this product. The information in this document is subject to change without notice. No part of this document shall be deemed to be part of any warranty or contract unless specifically referenced to be part of such warranty or contract within this document. RDL-3000 FAMILY RDL-3000-RMD PRODUCT MANUAL 70-00184-06-00a Proprietary Redline Communications © 2013 Page 3 of 20 December 9, 2013 TABLE OF CONTENTS 1 Product Overview ................................................................... 5 2 Conditions of Use ................................................................... 6 2.1 General Conditions ............................................................................................ 6 2.2 Country of Use ................................................................................................... 6 2.3 Product Labeling ................................................................................................ 7 2.3.1 Module Label .................................................................................................... 7 2.3.2 External Label ................................................................................................... 7 3 Module Installation and Service ............................................ 8 3.1 Installation into a Final Product ........................................................................ 8 3.2 Module Servicing ............................................................................................... 8 3.3 Professional Installation .................................................................................... 8 3.4 Safety Precautions ............................................................................................. 9 3.5 Radio Frequency Safety .................................................................................... 9 4 Final Product Requirements ................................................ 10 4.1 Deployment in the United States .................................................................... 10 4.1.1 Frequency Bands ............................................................................................ 10 4.1.2 Antenna Use and Transmit Power ................................................................... 10 4.1.3 Certified Antennas .......................................................................................... 10 4.1.4 Operation in the 3675-3700 MHz Band ........................................................... 11 4.1.5 FCC Notices ................................................................................................... 15 4.2 Deployment in Canada .................................................................................... 17 4.2.1 Frequency Bands ............................................................................................ 17 4.2.2 Antenna Use and Transmit Power ................................................................... 17 4.2.3 Power and EIRP Results (MIMO Operation) ................................................... 17 Operation in the 3450-3650 MHz Band ........................................................ 17 Operation in the 3650-3675 MHz Band ........................................................ 17 4.3 Industry Canada Notices: Deployment in Canada: ........................................ 18 RDL-3000 FAMILY RDL-3000-RMD PRODUCT MANUAL 70-00184-06-00a Proprietary Redline Communications © 2013 Page 4 of 20 December 9, 2013 LIST OF TABLES Table 1: FCC - Approved Antennas ............................................................................... 10 Table 2: FCC - RDL-3000-RMD EIRP Measurement Results for 5 MHz ........................ 11 Table 3: FCC - RDL-3000-RMD EIRP PSD Measurement Results for 5 MHz ................ 12 Table 4: FCC - RDL-3000-RMD EIRP Measurement Results for 10 MHz ...................... 13 Table 5: FCC - RDL-3000-RMD EIRP PSD Measurement Results for 10 MHz .............. ......................... 17 Table 8: IC - Recommended Safe Distances ................................................................. 18 Table 9: IC - Avis RF Distances de séparation sécuritaire recommandées .................... 18 15 Table 7: IC - RDL-3000-RMD Power & EIRP Results: 3650-3675 MHz 14 Table 6: FCC - RDL-3000-RMD Recommended Safe Distances .........................…

Text truncated - open the document above for the full version.

December 5, 2013 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Applicant: Redline Communications Inc. FCC ID: QC8-RDL3000RMD RE: Limited Modular Transmitter Approval for RDL-3000-RMD To whom it may concern: Pursuant to the FCC Rules, Part 15 Section 15.212 Modular transmitters and 996369 D01 Module Equip Auth Guide v01r04, Redline Communications, Inc. hereby requests Limited Modular Transmitter Approval for the above listed FCC submittal. This letter affirms that Redline Communications Inc. shall retain complete control over the final installation of the module and will ensure compliance of the end product to all applicable FCC regulations. The module will not be distributed, marketed or sold to the general public and Redline will not make this module available as standalone product. It will be installed in the devices produced by Redline Communications Inc. and its authorized partners. According to the requirements of section 15.212 of FCC rules please note the following statements: 1. Limited Modular Transmitter Approval is being requested since the modular transmitter doesn’t have its own RF shielding. The module has been tested in a stand- alone configuration and complies with all of the FCC requirements at the module level. 2. The input to the module is an Ethernet interface. All modulation and protocol elements are contained within module. There are no other modulation or data inputs to the module that may result in non-compliant operation. 3. The modular transmitter has its own power supply regulation and filtering. 4. The modular transmitter complies with the antenna requirements of Section 15.203 and 15.204(c). The module does not incorporate an integrated antenna, however uses unique MCX RF connectors for antenna connection. The module has been tested with the intended antenna. Approval for additional antenna will be obtained through a Class II permissive change. The modular transmitter will be installed by professional installers trained by Redline Communications. Redline Communications will retain complete control over the final installation of the module ensuring that only approved antenna type will be used with this module. The list of approved antennas is included in the user manual. 5. The modular transmitter has been tested in a stand-alone configuration. It complies with Part 90 Subpart Z regardless of the device / enclosure into which it will be installed. 6. The modular transmitter will be labeled with its own FCC ID: QC8-RDL3000RMD, and the chassis of the device / enclosure into which the module is installed will display a label referring to the enclosed module “Contains FCC ID: QC8-RDL3000RMD”. 7. The modular transmitter operates under Part 90 Subpart Z to which it has been tested. Users do not have access to controls that may cause the module to operate outside its normal mode of operation. 8. The modular transmitter has been evaluated with the intended antenna and complies with all applicable RF exposure requirements. RF exposure warnings and separation distances are included in the user manual. Sincerely, Rod Cronin Director, Product Line Management Ph: 905.479.8344 x2377 [email protected]

Page 1 of 1 December 5, 2013 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Subject: Justification for requesting internal & external photos confidentiality Applicant: Redline Communications Inc. Model: RDL-3000-RMD FCC ID: QC8-RDL3000RMD Dear Sir / Madam, Redline Communications Inc. would like to request that internal and external photos are held confidential and not available to public viewing. This submission is for limited modular approval therefore the external and internal photos are the same. The RDL-3000-RMD is limited modular transmitter that will not be distributed, marketed or sold to the general public and Redline will not make this module available as standalone product. It will be installed in the devices produced by Redline Communications Inc. and its authorized partners. It is only serviceable by Redline Communications or its designated technicians. The final product containing RDL-3000-RMD module will be sold to customers for highly confidential and secure industrial, military and public safety applications. We feel that this information is considered as sensitive and creates a vulnerability to customers deploying this product. This request for confidentiality is made under the provisions of Section 0.457(d) of the Commission's Rules, and Section 552(b)(4) of the Freedom of Information Act. These sections authorize withholding from public inspection materials which would be privileged as a matter of law if retained by the person submitting them, and materials which would not customarily be released to the public by that person. Sincerely, Rod Cronin Director, Product Line Management Ph: 905.479.8344 x2377 [email protected]

Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent FCC On our behalf, I appoint Jenny Gibbs of Nemko Canada, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti- Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides Redline Communications, 302 Town Center Blvd, Markham, Ontario, L3R 0E8 Dated this 5 Day of December 20 13 Agency agreement expiration date: December 31, 2014 By: Rod Cronin Signature Printed Title: Director, Product Management On behalf of : Redline Communications Inc. Telephone: 905.479.8344 x2377

Page 1 of 1 December 5, 2013 Applicant: Redline Communications Inc. FCC ID: QC8-RDL3000RMD Model: RDL-3000-RMD MIMO Mode Declaration We, Redline Communications Inc, declare that RDL-3000-RMD Advanced Broadband Wireless Infrastructure Solutions, Model: RDL-3000-RMD, FCC ID: QC8-RDL3000RMD, when operates in MIMO A (STBC/STC) mode or MIMO B (spatial multiplexing) modes, the only modes in which it transmits from both antennas, the transmitter output signals are completely uncorrelated. Sincerely, Rod Cronin Director, Product Line Management Ph: 905.479.8344 x2377 [email protected]

December 5, 2013 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: QC8-RDL3000RMD Product Name: RDL-3000-RMD Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions’ rules, we hereby request that the following documents be held confidential: Block diagrams Schematic diagrams Parts List System overview Internal & External photos These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. If you have any queries, please do not hesitate to contact Sincerely, Dated this 5 Day of December 2013 By: Rod Cronin Signature Printed Title: Director, Product Management Telephone: 905-479-8344x2377 Applicant: Redline Communications Inc

This submission is for limited modular approval therefore the external and internal photos are the same. See internal photos.

50-01033-40 rev01 – Label, PCB, 3.xGHz R4, 1.0" x 0.5" POD 1) Paper: White Polyester, 1.0"W x 0.5"H, Texit# TXT-107-WP10S or equivalent. 0.5 inch 1.0 inch 2) Location: To be placed at ‘A’ or ‘B’ on the back of the board as marked below or other redline approved location. A B

Page 1 of 1 December 5, 2013 Applicant: Redline Communications Inc. FCC ID: QC8-RDL3000RMD Model: RDL-3000-RMD To Whom It May Concern This is to certify that our RDL-3000-RMD system does not need any Tune-up procedure over the power range, or at specific operating power levels when operating in the band 3675 – 3700MHz If you have any questions, please contact the undersigned. Dated this 5 Day of December 2013 By: Rod Cronin Signature Printed Title: Director, Product Management Telephone: 905-479-8344x2377 Applicant: Redline Communications Inc

Prediction of MPE limit at a given distance P = power G = antenna gain R = distance Conducted output power:40.00(dBm)EIRP Tune up tolerance1.00(dB) Number of carriers2(N) 25179(mW) 25(W) Antenna gain:0.0(dBi) Maximum antenna gain:1.0(numeric) EIRP25.2(W) ERP15.4(W) Distance:50(cm) Duty Cycle:100(%) Frequency:3675(MHz) MPE Limit:1.0(mW/cm^2) Power density:0.80(mW/cm^2) 8.01(W/m^2) Margin0.96(dB) S = power density 2 4R PG S p =

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation FCC 90 Z.docx; Date: Nov 2013 SCC Accredited LAB LAB Accrédité CCN TM ONE WORLDOURAPPROVAL Test report 249235-1TRFWL Date of issue: December 19, 2013 Applicant: Redline Communications Inc. Product: Broadband Wireless Infrastructure Product Model: RDL-3000-RMD FCC ID: QC8-RDL3000RMD Specification: FCC Part 90, Subpart Z Private land mobile radio services. Wireless broadband services in the 3650–3700 MHz band Report reference ID: 249235-1TRFWL Page 2 of 47 Test location Company name: Nemko Canada Inc. Address: 303 River Road City: Ottawa Province: Ontario Postal code: K1V 1H2 Country: Canada Telephone: +1 613 737 9680 Facsimile: +1 613 737 9691 Toll free: +1 800 563 6336 Website: www.nemko.com Site number: 176392 (3 m semi anechoic chamber) Tested by: Kevin Rose, Wireless/EMC Specialist Reviewed by: Andrey Adelberg, Senior Wireless/EMC Specialist Date: December 19, 2013 Signature: Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 249235-1TRFWL Page 3 of 47 Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Applicant and Manufacturer .................................................................................................................................................................................... 4 1.2 Test specifications .................................................................................................................................................................................................... 4 1.3 Statement of compliance ......................................................................................................................................................................................... 4 1.4 Exclusions ................................................................................................................................................................................................................. 4 1.5 Test report revision history ...................................................................................................................................................................................... 4 Section 2. Summary of test results ....................................................................................................................................................................... 5 2.1 FCC Part 90, tests results .......................................................................................................................................................................................... 5 Section 3. Equipment under test (EUT) details ..................................................................................................................................................... 6 3.1 Sample information .................................................................................................................................................................................................. 6 3.2 EUT information ....................................................................................................................................................................................................... 6 3.3 Technical information .............................................................................................................................................................................................. 6 3.4 Product description and theory of operation ........................................................................................................................................................... 6 3.5 EUT exercise details .................................................................................................................................................................................................. 6 3.6 EUT setup diagram ................................................................................................................................................................................................... 7 3.7 EUT sub assemblies .................................................................................................................................................................................................. 7 Section 4. Engineering considerations .................................................................................................................................................................. 8 4.1 Modifications incorporated in the EUT...............................…

Text truncated - open the document above for the full version.