QD8RW2601PRFRoad Weighter

USER’S MANUAL ATTACHMENT F Road Weigher ----------------------------------------------- RW-2601PRF ----------------------------------------------- Owner's Manual FederalCommunications CommissionRequirements Warning : Changes or modifications not expressly approved by the party responsible for compliance with the FCC’S rules could void the user's authority to operate the equipment . NOTE : This equipme nt has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipme nt generates, uses and ca n ra diate radio fre que ncy e ne rgy a nd, if not i nstalle d a nd use d i n acco rda nce wit h the instruction, may cause harmful interference to radio communication. However, there is no guarantee that inte rfe re nce will not occur in a pa rtic ula r installatio n. If this e quipme nt dose cause harmf ul i nte rfe re nce to radio o r te le vision re ce ptio n. Whic h ca n be de te rmi ne d by t urni ng the e qui pme nt off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver - Connect the equipme nt into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help * * * Contents * * * 1. Preface We greatly appreciate for your purchase of the CAS RW- 2601PRF . 1. Preface ••••••••••••• 1 2. Features ••••••••••• 2 3. Specifications •••••••••••• 6 ∅ Dimensions ∅ Specifications 4. Front Panel ••••• 7 5. Test Mode ••••••• 8 6. Calibration Mode ••••••••• 11 7. Set Mode ••••••• 13 8. Weighing Mode ••• 16 9. Error Message and Trouble ••• 18 These goods have hold excellent performance and splendid properties through strike tests as well as devoting ourselves under severe quality management. Before using RW-2601PRF , it is recommended to read this manual carefully and to apply the function application fully.  Cautions ! Do not press the keys hardly, for the keys are in operation with soft touch. ! Keep away RW-2601PRF from the rain. ! Avoid sudden temperature change. ! Do not install RW-2601PRF in a place with high voltage and excessive electrical ! noises. ! Keep it in dry place. ! Do not use under direct rays. ! Do not use at the place with excessive electrical noises and vibration. 2. Features ∅ Up to 6 axle(P/F) scales ∅ Ωιρελεσσ δατα χομμυνιχατιον ωιτη ΡΩ−10ΠΡΦ ∅ Εασψ το σετυπ τηε Ινστρυμεντ ∅ Compact size & light weight Box type ∅ Built in Battery Charger & Large capacity Battery ∅ Back-Light Function ∅ Optional Printer 3. Specifications ∅ Dimensions  Specifications Frequency 903.000Mhz < 918.500Mhz Communication method FSK (Frequency Shift Keying fsk) Comm. speed 9600bps Comm. distance Max. 100M Display below zero “-” display Battery life time Approx. 20 hours Battery charging time Approx. 12 hours Power consumption 12 W Temperature range -10<+40 ITEM Description Operating Power Inner Battery Operation.(DC6V) Power Source AC 120V, 60 Hz (For Battery Charger) Display LCD 6 Digit (25 mm) Sub display Stable, Zero, Net Product Weight 9.2 kg Option Built -in Printer 4. Front Panel (1) Display Lamp STABLE : Ωειγητ ισ σταβλε NET : ΟΝ (νετ ωειγητ), ΟΦΦ (γροσσ ωειγητ) ZERO : “0” κγ POWER : Supply AC POWER SOURCE. CHARGE : Green Lamp -> Charging is completed. Red Lamp -> It is charging. (2) Key Functions Υ Numeric keys - TEST, CAL, SET Mode :Used to enter numerical data. - Normal Mode : (1, 2, 3, 4, 5, 6 key) Used to select platform that you wish to display weight Υ CLEAR key : Used to clear erroneous entries in CAL, SET, and TEST mode. Υ ′′ , א key - Used to enter minimum division in CAL mode. Υ ZERO key : Used to remove small variations in the scale's zero. Υ PRINT key : Used to print transactions. Υ SUM key : Used to print total weight. Υ Truck no. key : Used to enter truck number. Υ ENTER key : No. TRUCK ENTER SUMPRINT Static Motion kg lb ZERO TARE - Used as an ENTER key. (3) How to go to TEST mode Υ Press the Truck no. key and ON/OFF key. (4) How to go to SET mode Υ Press the ENTER key and ON/OFF. (5) How to go to CAL mode Υ Turn on the power while pressing the ZERO key and then press the TARE key within 1 second. 5.TEST MODE (1) How to go to Test mode Press the Truck no. key and ON/OFF key. (2) Key Functions Numeric key : Used to enter numerical data. ENTER key : Used to go to next menu. (3) Test Menu(TEST 1 - TEST 4) TEST 1 : Key Test TEST 2 : LCD Display Test TEST 3 : Load Cell and A/D conversion Test TEST 4 : Serial interface and Printer Test (RS-232) T T E E S S T T   T T E E S S T T   REF 1. You will go to TEST 3 automatically after completing TEST 2. T T E E S S T T   REF 1. Check whether digital value is changing.If the digital value is fixed or zero is displayed, please check the connection of the load cell. T T E E S S T T 4 4 Sample Print out : Key Test Key Display Descriptions ENTER key : Next menu Other key : Perform test tESt1 1 Press any key to test then code of the key is displayed. Display Test Key Display Descriptions ENTER key: Next menu tESt2 88888 Test 2 is performed automati ally A/D Conversion Test (Load Cell Test) Key Display Descriptions ENTER key: Next menu tESt 3 5500 Display shows digital value of current weight. This value means Serial Interface and Printer Test Key Display Descriptions LIGHT key : Exit test mode Other key : Perform tESt4 GOOD ERR06 No error in printer Check printer connector TEST OK 6. CALIBRATION MODE (1) How to go to Calibration Mode Turn on the power while pressing the ZERO key and then press the TARE key within 1 second. (2) Key Functions Numeric key : Used to enter numerical data. ENTER key : Used to go to next menu. (3) Calibration Menu(CAL 1 - CAL 5) CAL 1 : Set Up Maximum Capacity CAL 2 : Set Up Minimum Division C…

Text truncated - open the document above for the full version.

ATTACHMENT D. FCC ID : QD8RW2601PRF RW-2601PRF CIRCUIT

REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 ATTACHMENT B. - EXTERNAL PHOTOS REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525

REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr ATTACHMENT A. - ID LABEL INFORMATION AND LOCATION PHOTOS REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr 1.1 Label Location Photos The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase.(Labeling requirements per 2.925) (SEE NEXT PAGE) REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr CAS Model NO : RW-2601PRF POWER : AC 120~240 AC FCC ID : QD8RW2601PRF Serial No : This device complies with part 15 of the FCC Rules Operation is subject the following two conditions : (1) This device may not cause harmful interference , and (2) This device must accept any interference received, Including interference that may cause undesired operation. MANUFACTURED BY CAS Corporation MADE IN KOREA

REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 ATTACHMENT G. - INTERNAL PHOTOS REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525

HYUNDAI CALIBRATION & CERTIFICATION TECH. CO., LTD. PRODUCT COMPLIANCE TEAM SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI, KYOUNKI-DO, 467-701, KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr CERTIFICATION FCC Rule Part(s): Part 15 & 2; ET Docket 95-19 Equipment Class:Communications Receiver used w/ Pt 15 Tx (CYY) Frequency Range: 20 ch, 903.000Mhz  918.500Mhz Standard(s):FCC Class B: 2001 Equipment(EUT) Type:Road weigher Model(s): RW-2601PRF Port/ Connector(s): Power cable 1.5m The device bearing the trade name and model specified above, has been shown to comply with the applicable technical standards as indicated in the measure ment report and was tested in accordance with the measurement procedures specified in ANSI C63.4-1992.(See Test Report if any modifications were made for compliance) I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measure ments and vouch for the qualifications of all persons taking them. HYUNDAI C-Tech. certifies that no party to application has been denied the FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse of 1988,21 U.S.C.853(a). Report prepared by : Ki-Soo Kim Manager of EMC Tech. Part  HYUNDAI CALIBRATION & CERTIFICATION TECH. CO., LTD. EMC LAB.  QD8RW2601PRF CAS Corporation Manufacture; CAS Corporation #19 Ganap-ri Gwangjuk-Myoun angju-gun Gyeounggi-do, Seoul Korea CAS FRN : 0007-1276-16 Date of Issue: MAY 21, 2002 Test Report No.: HCT-F02-0505 Test Site: HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. HCT FRN : 0005-8664-21 FCC ID : APPLICANT : REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr TABLE OF CONTENTS PAGE 1. GENERAL INFORMATION........................................................................................ 1.1 Product Description........................................................................................... 1.2 Related submittal(s)/Grant(s).......................................................................... . 1.3 Tested System Details........................................................................................ 1.4 Test Methodology.............................................................................................. 1.5 Test Facility..................................................................................................... 2. SYSTEM TEST CONFIGURATION............................................................................. 2.1 Justification...................................................................................................... 2.2 EUT Exercise Software..................................................................................... 2.3 Cable Description............................................................................................. 2.4 Noise Suppression Parts on Cable..................................................................... 2.5 Equipment Modifications................................................................................. 2.6 Configuration of Tested System......................................................................... 3. FINAL CONDUTED AND RADIATED EMISSION TESTS SUMMARY........................ 3.1 Conducted Emission Tests.................................................................................. 3.2 Conducted Power Tests........................................................................... 3.3 Radiated Emission Tests......................................................................... 4. FIELD STRENGTH CALCULATION........................................................................... 5. LIST OF TEST EQUIPMENT ..................................................................................... ATTACHMENT A ......................................................ID Label / Location Info. ATTACHMENT B ...................................................... External Photos. ATTACHMENT C ...................................................... Block ATTACHMENT D ...................................................... Circuit Diagram. ATTACHMENT E ......................................................Test Setup Photos. ATTACHMENT F ......................................................User’s Manual. ATTACHMENT G ......................................................Internal Photos. ATTACHMENT H......................................................Part List. 2 3 3 3 4 4 4 5 5 5 6 6 7 8 8 9 10 11 12 13 REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr 1. GENERAL INFORMATION 1.1 Product Description These goods have hold excellent performance and splendid properties through strike tests as well as devoting ourselves under severe quality management. Product specification information described herein was obtained from product data sheet or user's manual. CHASSIS TYPEMETAL LIST OF EACH OSC. OR XTAL. FREQ.(FREQ. 1MHz) 11.0592MHz(2ea), 4.9152MHz Display LCD 6 Digit (25 mm) CHIPSET BRAND AND PART NO. HM6264LP-70 : HMC 4082351 : OKI W27C512-45 : WINBAND 74HC54IN : PHILIPS HD74HC240P : HITACHI HD74HC00P : HITACH HD74HCI75P : HITACHI HD74HC544P MC14066BCP : MOTROLA AT89C55 : ATMEL D722FG: NEC M82C51A : OKI HEF4040BP : PHILIPS GMS97C54 : HYNIX NUMBER OF LAYER RF BOARD 4 LAYER MAIN BOARD 4LAYE R PRINT BOARD 4LAYE R POWER BOARD 2 LAYER Channel20 channels Operation temperature-10 to +40 FREQUENCY RANGE903.000Mhz  918.500Mhz Product Weight9.2 kg 1.2 Related Submittal(s) / Grant(s) ORIGINAL SUBMITTAL ONLY…

Text truncated - open the document above for the full version.

REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr ATTACHMENT E. - TEST SETUP PHOTOS REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr CONDUCTED AND RADIATED MEASUREMENT PHOTOS [CONDUCTED MEASUREMENT PHOTO] REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr [ANTENNA CONDUCTED POWER MEASUREMENT PHOTO] REPORT NO : HCT-F02-0505 FCC ID : QD8RW2601PRF DATE : MAY 21, 2002 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr [RADIATED MEASUREMENT PHOTO]