QHC-OPENWAY1XCellular/ PCS CDMA Power Meter with Zigbee Transmitter

   2006 SmartSynch™ SmartMeter™ System SSI OPENWAY 1X SmartMeter User Guide SMR45-4601B SSI OPENWAY 1X SmartMeter User Guide SMR45-4601B 2 Copyrights Copyright 2006 SmartSynch ® , Inc. All rights reserved. No part of this documentation may be reproduced transmitted, processed, or recorded by any means or form, or be released to any third party without the express written consent of SmartSynch, Inc. Trademarks SmartSynch ® , SmartSynch logo, TMS™, and SmartMeter™ are trademarks or registered trademarks of SmartSynch, Inc. All other companies, brands, and product names listed herein are trademarks or registered trademarks of their respective holders. Document Revisions The SSI OPENWAY 1X SmartMeter User Guide can be referred to by its document number: SMR45- 4601A. Each revision of this document is designated with a letter, beginning with “A”. SmartSynch, Inc. reserves the right to revise this publication and to make any modifications to its content, at any time, without obligation to notify any party, person, or entity of such revisions or changes. Occasionally, changes or variations exist in the products that are not reflected in the documentation. Generally, if such changes or variations are known to exist and affect the product significantly, release notes will accompany the documentation. The information in this guide should not be considered as all-inclusive or covering all cases for events that may occur. If further information is required, consult your technical support representative. See the License Agreement contained in the product for complete license information. Contact your technical support representative for more information on any of our products. SSI OPENWAY 1X SmartMeter User Guide SMR45-4601B 3 Table of Contents 1 INTRODUCTION ...............................................................................................................................................5 1.1 ABOUT THIS GUIDE........................................................................................................................................5 1.2 REFERENCE MATERIALS.................................................................................................................................5 1.3 CONTACTING SMARTSYNCH...........................................................................................................................5 1.3.1 Technical Support ..................................................................................................................................5 1.3.2 Documentation Feedback ......................................................................................................................6 1.3.3 SmartSynch Headquarters .....................................................................................................................6 2 GETTING STARTED.........................................................................................................................................7 2.1 OPERATIONS...................................................................................................................................................7 2.2 SAFETY PRECAUTIONS....................................................................................................................................7 2.2.1 Interference with Medical Equipment....................................................................................................7 2.2.2 Fire or Explosion Hazards ....................................................................................................................7 2.2.3 Interference with Other Devices ............................................................................................................8 2.3 PREREQUISITES...............................................................................................................................................8 3 INSTALLING THE CENTRON SMARTMETER ..........................................................................................9 3.1 PRELIMINARY INSPECTIONS............................................................................................................................9 3.2 INSTALLATION PROCESS.................................................................................................................................9 3.2.1 Option 1: Direct Field Installation ........................................................................................................9 3.2.2 Option 2: Meter Shop Test and Field Installation .................................................................................9 3.2.3 Meter Installation ..................................................................................................................................9 3.3 PROVISIONING THE SMARTMETER...............................................................................................................10 4 TROUBLESHOOTING ....................................................................................................................................11 4.1 TROUBLESHOOTING PROCESS FLOW.............................................................................................................11 4.2 TROUBLESHOOTING PROCESS DESCRIPTION.................................................................................................12 5 CENTRON DISPLAY FEATURE...................................................................................................................14 6 REQUIREMENTS AND COMPLIANCE ......................................................................................................16 SSI OPENWAY 1X SmartMeter User Guide SMR45-4601B 5 1 Introduction 1.1 About This Guide This document is a manual designed to help guide you through the testing, installation and activation of your SSI OPENWAY 1X SmartMeter. This manual provides general instructions on the support of your SmartMeter and references to supporting manufacturer …

Text truncated - open the document above for the full version.

SamrtSynch, Inc. FCC ID: QHC-OPENWAY1X Model: OPENWAY 1X External Photos EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Page 1 of 4 © 2010 PCTEST Engineering Laboratory Inc. EXTERNAL PHOTOGRAPHS SamrtSynch, Inc. FCC ID: QHC-OPENWAY1X Model: OPENWAY 1X External Photos EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Page 2 of 4 © 2010 PCTEST Engineering Laboratory Inc. SamrtSynch, Inc. FCC ID: QHC-OPENWAY1X Model: OPENWAY 1X External Photos EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Page 3 of 4 © 2010 PCTEST Engineering Laboratory Inc. SamrtSynch, Inc. FCC ID: QHC-OPENWAY1X Model: OPENWAY 1X External Photos EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Page 4 of 4 © 2010 PCTEST Engineering Laboratory Inc.

FCC ID Label – SSO OpenWay 1X FCC ID Label – SSO OpenWay 1X, Placement FCC 15 Label – SSI OpenWay 1X

SmartSynch, Inc. FCC ID: QHC-OPENWAY1X Model: OPENWAY 1X Internal Photos EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Page 1 of 11 © 2010 PCTEST Engineering Laboratory Inc. INTERNAL PHOTOGRAPHS SmartSynch, Inc. FCC ID: QHC-OPENWAY1X Model: OPENWAY 1X Internal Photos EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Page 2 of 11 © 2010 PCTEST Engineering Laboratory Inc. SmartSynch, Inc. FCC ID: QHC-OPENWAY1X Model: OPENWAY 1X Internal Photos EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Page 3 of 11 © 2010 PCTEST Engineering Laboratory Inc. SmartSynch, Inc. FCC ID: QHC-OPENWAY1X Model: OPENWAY 1X Internal Photos EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Page 4 of 11 © 2010 PCTEST Engineering Laboratory Inc. SmartSynch, Inc. FCC ID: QHC-OPENWAY1X Model: OPENWAY 1X Internal Photos EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Page 5 of 11 © 2010 PCTEST Engineering Laboratory Inc. SmartSynch, Inc. FCC ID: QHC-OPENWAY1X Model: OPENWAY 1X Internal Photos EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Page 6 of 11 © 2010 PCTEST Engineering Laboratory Inc. SmartSynch, Inc. FCC ID: QHC-OPENWAY1X Model: OPENWAY 1X Internal Photos EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Page 7 of 11 © 2010 PCTEST Engineering Laboratory Inc. SmartSynch, Inc. FCC ID: QHC-OPENWAY1X Model: OPENWAY 1X Internal Photos EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Page 8 of 11 © 2010 PCTEST Engineering Laboratory Inc. SmartSynch, Inc. FCC ID: QHC-OPENWAY1X Model: OPENWAY 1X Internal Photos EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Page 9 of 11 © 2010 PCTEST Engineering Laboratory Inc. SmartSynch, Inc. FCC ID: QHC-OPENWAY1X Model: OPENWAY 1X Internal Photos EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Page 10 of 11 © 2010 PCTEST Engineering Laboratory Inc. SmartSynch, Inc. FCC ID: QHC-OPENWAY1X Model: OPENWAY 1X Internal Photos EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Page 11 of 11 © 2010 PCTEST Engineering Laboratory Inc.

Reviewed by: FCC ID: QHC-OPENWAY1X MAXIMUM PERMISSIBLE EXPOSURE (MPE) DATA REPORT Quality Manager Test Report S/N: Test Dates: EUT Type: 0Y1010041666.QHC October 11, 2010 Smartmeter with Cellular/PCS CDMA and Zigbee Page 1 of 7 © 2010 PCTEST Engineering Laboratory, Inc. REV 3.1MPE 02/09/09 Applicant Name: Date of Testing: SmartSynch Inc. October 11, 2010 4400 Old Canton Road, Suite 300 Test Site/Location: Jackson, MS 39211 PCTEST Lab, Columbia, MD, USA USA Test Report Serial No.: 0Y1010041666.QHC FCC ID: QHC-OPENWAY1X APPLICANT: SmartSynch Inc. EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee FCC Rule Part(s): FCC Part 1 (§1.1310) and Part 2 (§2.1091) FCC Classification: PCS Licensed Transmitter (PCB) Test Procedure: OET Bulletin 65 The device bearing the FCC Identifier specified above has been shown to comply with the applicable technical standards as indicated in the measurement report and has been tested in accordance with the measurement procedures specified in FCC OET Bulletin 65 (See Test Report). These measurements were performed with no deviation from the standards. Test results reported herein relate only to the item(s) tested. I authorize and attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST certifies that no party to this application has been subject to a denial of Federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. PCTEST ENGINEERING LABORATORY, INC. 6660-B Dobbin Road, Columbia, MD 21045 USA Tel. 410.290.6652 / Fax 410.290.6554 http://www.pctestlab.com RF EXPOSURE EVALUATION (MAXIMUM PERMISSIBLE EXPOSURE) Reviewed by: FCC ID: QHC-OPENWAY1X MAXIMUM PERMISSIBLE EXPOSURE (MPE) DATA REPORT Quality Manager Test Report S/N: Test Dates: EUT Type: 0Y1010041666.QHC October 11, 2010 Smartmeter with Cellular/PCS CDMA and Zigbee Page 2 of 7 © 2010 PCTEST Engineering Laboratory, Inc. REV 3.1MPE 02/09/09 TABLE OF CONTENTS 1.0 RF EXPOSURE EVALUATION – MAXIMUM PERMISSIBLE EXPOSURE (MPE) .........................3 1.1 INTRODUCTION ................................................................................................................................... 3 1.2 EUT DESCRIPTION .............................................................................................................................. 3 1.3 MPE REQUIREMENTS OVERVIEW..................................................................................................... 4 1.4 PROCEDURE........................................................................................................................................ 5 1.5 SUMMARY OF RESULTS ..................................................................................................................... 6 2.0 CONCLUSION..................................................................................................................................7 Reviewed by: FCC ID: QHC-OPENWAY1X MAXIMUM PERMISSIBLE EXPOSURE (MPE) DATA REPORT Quality Manager Test Report S/N: Test Dates: EUT Type: 0Y1010041666.QHC October 11, 2010 Smartmeter with Cellular/PCS CDMA and Zigbee Page 3 of 7 © 2010 PCTEST Engineering Laboratory, Inc. REV 3.1MPE 02/09/09 1.0 RF EXPOSURE EVALUATION – MAXIMUM PERMISSIBLE EXPOSURE (MPE) 1.1 Introduction This document is prepared on behalf of SmartSynch Inc. to show compliance with the RF Exposure requirements as required in §1.1310 of the FCC Rules and Regulations and RSS-102 of Industry Canada. The limit for Maximum Permissible Exposure (MPE), specified in FCC §1.1310, is listed in Table 1-1. According to FCC §1.1310 and RSS-102: the criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b). Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits For Occupational / Control Exposures (f = frequency) 30-300 61.4 0.163 1.0 6 300-1500 ... ... f/300 6 1500-100,000 ... ... 5.0 6 (B) Limits For General Population / Uncontrolled Exposure (f = frequency) 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 Table 1-1. Limits for Maximum Permissible Exposure (MPE) 1.2 EUT Description The Smartsynch FCC ID: QHC-OPENWAY1X is a Smartmeter containing an Itron Zigbee module (separately certified under FCC ID: SK9AMI-4) and a CDMA module (separately certified under FCC ID: IHDP56JE1). For this MPE evaluation the device is set to transmit from the antenna of each transmitter and the RF exposure of each transmitter is evaluated individually. EUT: Model: SSI Openway 1X Grantee: SmartSynch Inc. FCC ID: QHC-OPENWAY1X Internal Antenna Gains: 1.5dBi – Cellular, 3.0dBi – PCS and 4.4dBi – 2.4GHz Zigbee Transmitter The SSI Openway 1X is standard with internal antennas for the CDMA module and Zigbee module. However there is option for the CDMA module to be fitted with with an external antenna. The maximum gain antenna is determined in this report. Reviewed by: FCC ID: QHC-OPENWAY1X MAXIMUM PERMISSIBLE EXPOSURE (MPE) DATA REPORT Quality Manager Test Report S/N: Test Dates: EUT Type: 0Y1010041666.QHC October 11, 2010 Smartmeter with Cellular/PCS CDMA and Zigbee Page 4 of 7 © 2010 PCTEST Engineering Laboratory, Inc. REV 3.1MPE 02/09/09 1.3 MPE Requirements Overview Three different categories of transmitters are defined by the FCC in OET Bulletin 65. These categories are fixed installation, mobile, and portable and are defined as follows: o Fixed Installations: fixed location means that the device, including its antenna, is physically secured at a permanent location and is not able to be easily moved to another location. Additionally, di…

Text truncated - open the document above for the full version.

Reviewed by: FCC ID: QHC-OPENWAY1X FCC Pt. 22/24 CDMA MEASUREMENT REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0Y1010041663.QHC October 01 - 06, 2010 Smartmeter with Cellular/PCS CDMA and Zigbee Page 1 of 37 © 2010 PCTEST Engineering Laboratory, Inc. REV 1.2CFI 04/19/2010 Applicant Name: Date of Testing: SmartSynch Inc. October 01 - 06, 2010 4400 Old Canton Road, Suite 300 Test Site/Location: Jackson, MS 39211 PCTEST Lab., Columbia, MD, USA USA Test Report Serial No.: 0Y1010041663.QHC FCC ID: QHC-OPENWAY1X APPLICANT: SMARTSYNCH INC. Application Type: Certification FCC Classification: PCS Licensed Transmitter (PCB) FCC Rule Part(s): §2; §22(H), §24(E) IC Specification(s): RSS-129 Issue 2; RSS-133 Issue 5 EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Model(s): SSI Openway 1X Tx Frequency Range: 824.70 - 848.31MHz (Cell. CDMA) / 1851.25 - 1908.75MHz (PCS CDMA) Max. RF Output Power: 0.072 W ERP Cell. CDMA (18.57 dBm), 0.366 W EIRP PCS CDMA (25.64 dBm) Emission Designator(s): 1M27F9W (CDMA) / 1M27F9W (PCS) Test Device Serial No.: identical prototype [S/N: 6JF060901027] This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in §2.947. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Grant Conditions: Power output listed is ERP for Part 22 and EIRP for Part 24. PCTEST certifies that no party to this application has been subject to a denial of Federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. PCTEST ENGINEERING LABORATORY, INC. 6660-B Dobbin Road, Columbia, MD 21045 USA Tel. 410.290.6652 / Fax 410.290.6554 http://www.pctestlab.com MEASUREMENT REPORT FCC Part 22 & 24 / IC RSS-129/RSS-133 Reviewed by: FCC ID: QHC-OPENWAY1X FCC Pt. 22/24 CDMA MEASUREMENT REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0Y1010041663.QHC October 01 - 06, 2010 Smartmeter with Cellular/PCS CDMA and Zigbee Page 2 of 37 © 2010 PCTEST Engineering Laboratory, Inc. REV 1.2CFI 04/19/2010 TABLE OF CONTENTS FCC PART 22 & 24 MEASUREMENT REPORT...........................................................................3 1.0 INTRODUCTION ..............................................................................................................................4 1.1 SCOPE ................................................................................................................................................ 4 1.2 TESTING FACILITY............................................................................................................................. 4 2.0 PRODUCT INFORMATION..............................................................................................................5 2.1 EQUIPMENT DESCRIPTION .............................................................................................................. 5 2.2 EMI SUPPRESSION DEVICE(S)/MODIFICATIONS ........................................................................... 5 2.3 LABELING REQUIREMENTS.............................................................................................................. 5 3.0 DESCRIPTION OF TESTS ..............................................................................................................6 3.1 MEASUREMENT PROCEDURE......................................................................................................... 6 3.2 OCCUPIED BANDWIDTH ................................................................................................................... 6 3.3 CELLULAR - BASE FREQUENCY BLOCKS....................................................................................... 6 3.4 CELLULAR - MOBILE FREQUENCY BLOCKS ................................................................................... 7 3.5 PCS - BASE FREQUENCY BLOCKS .................................................................................................. 7 3.6 PCS - MOBILE FREQUENCY BLOCKS .............................................................................................. 7 3.7 SPURIOUS AND HARMONIC EMISSIONS AT ANTENNA TERMINAL.............................................. 7 3.8 RADIATED POWER AND RADIATED SPURIOUS EMISSIONS ........................................................ 8 3.9 PEAK-AVERAGE RATIO ..................................................................................................................... 8 3.10 FREQUENCY STABILITY / TEMPERATURE VARIATION ................................................................. 8 4.0 TEST EQUIPMENT CALIBRATION DATA ......................................................................................9 5.0 SAMPLE CALCULATIONS ............................................................................................................10 6.0 TEST RESULTS .............................................................................................................................11 6.1 SUMMARY......................................................................................................................................... 11 6.2 OUTPUT POWER MEASUREMENT ................................................................................................. 12 6.3 EFFECTIVE RADIATED POWER OUTPUT DATA ........................................................................... 12 6.4 EQUIVALENT ISOTROPIC RADIATED POWER OUTPUT DATA .................................................... 13 6.5 CELLULAR CDMA RADIATED MEASUREMENTS..............................…

Text truncated - open the document above for the full version.

SmartSynch, Inc. FCC ID: QHC-OPENWAY1X Model: OPENWAY 1X Test Set-Up Photos EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Page 1 of 2 © 2010 PCTEST Engineering Laboratory Inc. TEST SETUP PHOTOGRAPHS SmartSynch, Inc. FCC ID: QHC-OPENWAY1X Model: OPENWAY 1X Test Set-Up Photos EUT Type: Smartmeter with Cellular/PCS CDMA and Zigbee Page 2 of 2 © 2010 PCTEST Engineering Laboratory Inc.