QIC-MSE04WorldPenScan BT

WorldPenScan Series User Manual Release: November, 2012 Version: v3.6 Win Penpower Technology Ltd. Software User License Agreement You are licensed to legally use this software program (“the Software”) by Penpower Technology Ltd (“Penpower”) under this license agreement (“The Agreement”). If you do not agree with any of the provisions in this Agreement, please do not install, copy or use the Software. By using the Software, you are deemed to fully understand and accept the provi- sions of this Agreement. 1. Intellectual Property All intellectual property rights in the Software, together with all information and docu- ments included in the packaging for the Software (including but not limited to copy- rights), are property of Penpower or have been licensed to Penpower, and are protected by relevant laws and regulations. 2. License to Use You are authorized to use the Software on one (1) single computer only. You may not use the Software on any other machines other than the said single computer. 3. Authority to Copy The Software and all documents included with the Software, and copyright thereof, are property of Penpower. You are licensed to make one (1) copy of the Software for your personal backup purposes. All other acts of copying are strictly prohibited. The backup copy shall not be installed nor used while the Software is being used. You may not sell, lease, dissemble, reverse engineer, copy, translate, adapt or derive the Software, or obtain the source code of the Software by any other means. You may not use the Software for any purposes other than those permitted under this Agreement. 4. Business Users If you need to install or use the Software on more than one (1) computer, please contact Penpower or our local distributor to purchase a license for the additional use. 5. Liability You agree to indemnify Penpower against all losses, costs, debts, settlement payments or other expenses (including but not limited to attorneys fees) arising from your breach of this Agreement, and you agree to compensate Penpower for all of the abovemen- tioned damages. 6. No Warranty Effectiveness of a packaged software in handling information is closely related to its software and hardware environment. The Software is published following careful de- velopment and product testing by Penpower, but Penpower is not able to conduct tests based on all possible combinations of software and hardware environment. Therefore, Penpower is unable to promise nor warrant that there will be absolutely no risk of loss or damage of information, or any other kind of loss, during installation and/or execution of the Software. You must be fully aware of your risks in using the Software. Penpower will provide you with the Software and support services in respect of the Software to the maximum extent permitted by law. However, Penpower does not war- rant that the Software and information included in the package of the Software contain no defects or errors. Penpower is not liable for any indirect, special or incidental loss arising from the Software, including but not limited to loss of profits, damage to busi- ness reputation, cessation of work, hardware malfunction or damage, or any other com- mercial damage or loss arising from commercial use of the Software. 7. Limitation of Liability and Damages Except as expressly specified and expressly agreed to in writing by Penpower, Penpow- er shall not be responsible for any damage incurred by you for any reason under this Agreement, The maximum amount of compensation payable by Penpower, in respect of any damage incurred by you for any reason under this Agreement, is limited to the amount you have already paid to Penpower in respect of the Software. Under no circumstances will Penpower be held liable for the possibility of loss, not- withstanding Penpower may be aware of the possibility of such loss. 8. Prohibition Against Sublicense You are prohibited to assign the license in respect of the Software granted to you under this Agreement, or to grant a sublicense to another person. 9. Jurisdiction With regards to any disputes arising from this Agreement, Penpower and you agree that the court having jurisdiction over the business location of Penpower will be the court in the first instance.0 10. Miscellaneous In the event that any provision of this Agreement is found to be invalid at law, such in- validity will not affect the validity of any other provisions, or the legal enforceability of such other provisions. In the event that the Software cannot be executed under conditions of normal use, due to any damage to the original disk/s, Penpower will replace the disk/s free of charge. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Notice < FCC 15.19> This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, includin…

Text truncated - open the document above for the full version.

Report No.T121004S03 Page 1 of 4 External Photo Report No.T121004S03 Page 2 of 4 Report No.T121004S03 Page 3 of 4 Report No.T121004S03 Page 4 of 4

Label Location

Report No.：T121004S03 Page 1 of 7 Internal Photo Report No.：T121004S03 Page 2 of 7 Report No.：T121004S03 Page 3 of 7 Report No.：T121004S03 Page 4 of 7 Report No.：T121004S03 Page 5 of 7 Report No.：T121004S03 Page 6 of 7 Report No.：T121004S03 Page 7 of 7 Antenna Photo Antenna

Document Title Document No. Page No. Tests CTech-11:0003 Page 1 of 4 Prepared by Date Revision Security Classification (External, Internal, Confidential, Secret) Jörgen Andersson 2011-01-26 A Confidential Approved by Archive Claes Levinsson Antenna Measurements (ctech110003_a) Copyright ©2011 C Technologies AB. All rights reserved. No part of this documentation may be reproduced without the written permission of C Technologies AB. C Technologies, C-Pen, C Dictionary, and the C Technologies and C-Pen logos are either trademarks or registered trademarks of C Technologies AB. Other trademarks are the property of their respective owners. C-Pen Antenna Measurements Document Title Document No. Page No. Tests CTech-09:00xx Page 2 of 4 Copyright ©2011 C Technologies AB. All rights reserved. No part of this documentation may be reproduced without the written permission of C Technologies AB. C Technologies, C-Pen, C Dictionary, and the C Technologies and C-Pen logos are either trademarks or registered trademarks of C Technologies AB. Other trademarks are the property of their respective owners. 1Introduction 1.1Description The module has been removed and a coax cable is soldered in at the pad that goes to the antenna feeding pad. 1.2Matching network No matching network was included in the measurements in this report, but a matching network has been tested. Tests show that the impedance (matching) can be improved a little but the efficiency was only improved by 0.1 dB. 2Measurements 2.1VSWR Measurement 2.2Efficiency Measurement Document Title Document No. Page No. Tests CTech-09:00xx Page 3 of 4 Copyright ©2011 C Technologies AB. All rights reserved. No part of this documentation may be reproduced without the written permission of C Technologies AB. C Technologies, C-Pen, C Dictionary, and the C Technologies and C-Pen logos are either trademarks or registered trademarks of C Technologies AB. Other trademarks are the property of their respective owners. 2.3Radiation pattern Document Title Document No. Page No. Tests CTech-09:00xx Page 4 of 4 Copyright ©2011 C Technologies AB. All rights reserved. No part of this documentation may be reproduced without the written permission of C Technologies AB. C Technologies, C-Pen, C Dictionary, and the C Technologies and C-Pen logos are either trademarks or registered trademarks of C Technologies AB. Other trademarks are the property of their respective owners. 3Antenna Drawing

FCC IDQIC-MSE04 Report NoT121004S03-RP1 Page 1 / 80 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. FCC 47 CFR PART 15 SUBPART C AND ANSI C63.4:2003 TEST REPORT For WorldPenScan BT Model : MSE04 Trade Name : PENPOWER Issued for PENPOWER TECHNOLOGY LTD. 7F, No. 47, Lane 2, Sec. 2, Guangfu Rd., Hsinchu City 300, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. Hsinchu Lab. NO. 989-1 Wen Shan Rd., Shang Shan Village, Qionglin Shiang Hsinchu County 30741, Taiwan, R.O.C TEL: +886-3-5921698 FAX: +886-3-5921108 http://www.ccsrf.com E-Mail : [email protected] Issued Date: December 16, 2013 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF or any government agencies. The test results of this report relate only to the tested sample identified in this report. FCC IDQIC-MSE04 Report NoT121004S03-RP1 Page 2 / 80 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Revision History Rev. Issue Date Revisions Effect Page Revised By 00 12/05/2012 Initial Issue All Page 80 Rubeca Yu 01 01/11/2013 Revised RF Exposure Evaluation P.5 Rubeca Yu 02 04/17/2013 Revised DESCRIPTION OF TEST MODES and Add EUT Operating Condition & MAXIMUM PEAK OUTPUT POWER P. 6 , 7 , 10 , 19 Rubeca Yu 03 12/16/2013 Add Test Firm Registration Number.P.8Rubeca Yu FCC IDQIC-MSE04 Report NoT121004S03-RP1 Page 3 / 80 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. TABLE OF CONTENTS TITLE PAGE NO. 1. TEST REPORT CERTIFICATION ................................................................................ 4 2. EUT DESCRIPTION ..................................................................................................... 5 3. DESCRIPTION OF TEST MODES ............................................................................... 6 4. TEST METHODOLOGY ............................................................................................... 7 5. FACILITIES AND ACCREDITATION ........................................................................... 8 5.1 FACILITIES ............................................................................................................ 8 5.2 ACCREDITATIONS................................................................................................ 8 5.3 MEASUREMENT UNCERTAINTY ......................................................................... 9 6. SETUP OF EQUIPMENT UNDER TEST...................................................................... 10-11 7. FCC PART 15.247 REQUIREMENTS.......................................................................... 12 7.1 20dB BANDWIDTH FOR HOPPING...................................................................... 12-17 7.2 MAXIMUM PEAK OUTPUT POWER..................................................................... 18-19 7.3 HOPPING CHANNEL SEPARATION..................................................................... 20-25 7.4 NUMBER OF HOPPING FREQUENCY USED ...................................................... 26-28 7.5 DWELL TIME ON EACH CHANNEL ...................................................................... 29-43 7.6 CONDUCTED SPURIOUS EMISSION .................................................................. 44-51 7.7 RADIATED EMISSION........................................................................................... 52-71 7.8 CONDUCTED EMISSION ...................................................................................... 72-76 APPENDIX SETUP PHOTOS .......................................................................................... 77-80 FCC IDQIC-MSE04 Report NoT121004S03-RP1 Page 4 / 80 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. 1. TEST REPORT CERTIFICATION Applicant PENPOWER TECHNOLOGY LTD. Address 7F, No. 47, Lane 2, Sec. 2, Guangfu Rd., Hsinchu City 300, Taiwan, R.O.C. Equipment Under Test WorldPenScan BT Model MSE04 Trade Name PENPOWER Tested Date October 04 ~ November 24, 2012 APPLICABLE STANDARD Standard Test Result FCC Part 15 Subpart C AND ANSI C63.4:2003 PASS WE HEREBY CERTIFY THAT: The above equipment has been tested by Compliance Certification Services Inc., and found compliance with the requirements set forth in the technical standards mentioned above. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Approved by: Reviewed by: Sb Lu Gundam Lin Sr. Engineer Sr. Engineer FCC IDQIC-MSE04 Report NoT121004S03-RP1 Page 5 / 80 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. 2. EUT DESCRIPTION Product Name WorldPenScan BT Model Number MSE04 Identify Number T121004S03 Received Date October 04, 2012 Frequency Range 2402MHz to 2480MHz f = 2402 + nMHz, n = 0, .....78 Transmit Power 6.35 dBm (0.0043W) Channel Spacing 1MHz Channel Number 79 Channels Transmit Data Rate GFSK (1Mbps), π/4-DQPSK (2Mbps), 8-DPSK (3Mbps) Type of Modulation Frequency Hopping Spread Spectrum Frequency Selection by software / firmware Antenna Type C-Pen Antenna, Antenna Gain : 0.69dBi Power Rating 3.7Vdc (Battery) 5.0Vdc (Charging) Test Voltage 120Vac, 60Hz RF Exposure Evaluation Since the EUT is classed as portable device, and the maximum PK power is only 6.35dBm which is lower than FCC SAR exemption threshold, so the SAR evaluation is not required. I/O Port Mini USB Port …

Text truncated - open the document above for the full version.

FCC ID：QICMSE04 Report No：T121004S03RP1 Page 77 / 80 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. APPENDIX SETUP PHOTOS RADIATED EMISSION SETUP Below 1 GHz FCC ID：QICMSE04 Report No：T121004S03RP1 Page 78 / 80 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Above 1 GHz FCC ID：QICMSE04 Report No：T121004S03RP1 Page 79 / 80 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP FCC ID：QICMSE04 Report No：T121004S03RP1 Page 80 / 80 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. CONDUCTED EMISSION SETUP