QIIRY1012WAMedical Image Processing Unit

1012WCA User manual © Copyright 2013, Rayence Co. Ltd. All pages of this document contain proprietary and confidential information of Rayence Corporation and are intended for exclusive use by Rayence Corporation personnel or customers. Copying, disclosure to others or other use is prohibited without the express written authorization from Rayence Corporation. Please report any violations of requirement to Rayence Corporation. Attention For improvement of product performance, supplementation, or follow-up of information; the contents of this manual are subject to change without separate prior notice. Please note that our company has neither responsibility for any accidents nor obligation to do free repair service for any damage of the equipment due to user's mistake, which resulted from failure to follow the contents in this manual. Make sure to be familiar with the safety precautions and usage procedures. Also note that the product may slightly differ from the contents of this manual depending on specification. The following marks are used for the effective use of the product in this manual. This is used to emphasize essential information. Be sure to read this information to avoid incorrect operation. This indicates a potentially hazardous situation which, if not heeded, could result in death or serious injury to you or others. This indicates hazardous situation which, if not heeded, may result in minor or moderate injury to you or others, or may result in machine damage. Federal Law restricts this device to sale by or the order of a radiologist or any other practitioners licensed by the law of the state in which that person practices to use or order the use of the device. Contents 1. Introduction .................................................................................... 1 (1) Overview ........................................................................................ 1 (2) Intended use .................................................................................. 1 (3) Product features ........................................................................... 2 (4) Product components .................................................................... 3 (5) Components Description ............................................................. 5 (6) Warning ........................................................................................ 10 (7) Caution ........................................................................................ 12 2. Notes for Using the Detector ...................................................... 15 (1) Preparing ..................................................................................... 15 (2) Handling ...................................................................................... 16 (3) Handle Assembly ........................................................................ 16 (4) Before Exposure ......................................................................... 17 (5) During Exposure ......................................................................... 18 (6) Limit of Load ............................................................................... 19 (7) Disinfection and Cleaning ......................................................... 20 (8) Others .......................................................................................... 20 3. Technical Features ...................................................................... 21 (1) Mechanical Features .................................................................. 21 (2) Electrical Features ...................................................................... 21 (3) Environmental requirement ....................................................... 24 (4) PC Requirements ........................................................................ 24 4. Installation ................................................................................... 25 (1) Program setup ............................................................................ 25 (2) Connection (Manual Trigger) ..................................................... 26 (3) Connection (Auto Trigger) ......................................................... 34 (5) IP set up ....................................................................................... 39 (6) Using FPD_Manager (IP, SSID Change / Upgrade FW) ........... 40 5. Calibration .................................................................................... 49 (1) General Principle ........................................................................ 49 (2) Calibration (Manual mode) ........................................................ 51 (3) Calibration (Auto mode) ............................................................. 57 6. Image Acquisition Test ................................................................ 62 (1) Get Image .................................................................................... 62 (2) View Images ................................................................................ 63 (3) Get Recent Frame ....................................................................... 68 7. Operation ...................................................................................... 69 (1) Recommend ................................................................................ 69 (2) Switching power on / off ............................................................ 69 (3) Storage ........................................................................................ 69 8. Safety Information ....................................................................... 70 (1) Safety standard ........................................................................... 70 (2) Electromagnetic Compatibility Information ............................. 72 9. Radio Frequency compliance ...................................................... 77 (1) FCC Notice (U.S.A) ...................…

Text truncated - open the document above for the full version.

Rayence Co., Ltd. 1F, 2F, 3F, #402, 14, Samsung 1ro 1-gil,Hwaseong-si, Gyeonggi-do, South Korea, 445-170 Date: Sep 1, 2015 Attestation Letter for FCC ID: QIIRY1012WA To whom it may concern: We hereby declare that The company Rayence Co., Ltd product 1012WCA (FCC ID: QIIRY1012WA) in the RF module (FCC ID: PPD-AR5BHB116) does not use DFS band & 5.8GHz band(5745-5825MHz) by software. Best regards, Sincerely, Namyoung Ha Assistant Manager Rayence Co., Ltd. 1F, 2F, 3F, #402, 14, Samsung 1ro 1-gil,Hwaseong-si, Gyeonggi-do, South Korea, 445-170 Date: Sep 1, 2015 Attestation Letter for FCC ID: QIIRY1012WA To whom it may concern: We hereby declare that The company Rayence Co., Ltd as being manufacturer of model 1012WCA hereby states that the model uses a certified module with 2.4GHz & 5GHz bands (FCC ID: PPD-AR5BHB116 -> QIIRY1012WA). Modular Test report Information, 1. DTS test report - Tested site: SPORTON International Inc. - Report Date & number: FR080603A 2. NII Test report - Tested site: SPORTON International Inc. - Report Date & number: FR080603B Best regards, Sincerely, Namyoung Ha Assistant Manager Rayence Co., Ltd. 1F, 2F, 3F, #402, 14, Samsung 1ro 1-gil, Hwaseong-si, Gyeonggi-do, South Korea, 445-170 Date: Sep 1, 2015 Attestation for MODULE INCORPORATION To whom it may concern: We hereby declare that The company Rayence Co., Ltd declare that the equipment under FCC authorization processing FCC ID : QIIRY1012WA is incorporate Radio transmitter module which has been authorized by FCC as single modular transmitter, FCC ID : PPD-AR5BHB116. The end product (FCC ID : QIIRY1012WA) will use the in original certified transmitter module and will keep the original authorization condition except the change in antenna of the module during the final end product assembly. Due to the change in antenna of the radio module, the host product FCC authorization is required. For the host product testing, we leveraged the modular report for the conducted test data because the original operating condition is applied to the end product without any changes such as max. RF output power and frequencies and other radio characteristics. So, we concluded that the conducted test items of the radio module were considered as the same result in the end product. Radio module FCC ID : PPD-AR5BHB116 All other characteristics related with radiated was evaluated in the final end product condition. Best regards, Sincerely, Namyoung Ha Assistant Manager Rayence Co., Ltd. 1F, 2F, 3F, #402, 14, Samsung 1ro 1-gil, Hwaseong-si, Gyeonggi-do, South Korea, 445-170 Date: Sep 1, 2015 Attestation for MODULE INCORPORATION To whom it may concern: We hereby declare that The modular test reports allow for a maximum gain of the PIFA antenna to be 3.0dBi/3.62dBi in the 2.4GHz band and 4.76dBi in the 5GHz bands. This host device uses a PCB antenna with a gain of -4.99dBi in the 2.4GHz band and -4.98dBi in the 5.2GHz bands, therefore the limits used for the output power and power spectral density in the modular test reports allow use of these antennas with equal or lower gain. Radiated spurious emissions were tested for the host system so the different antenna type is covered by the system level tests. Best regards, Sincerely, Namyoung Ha Assistant Manager

Rayence Co., Ltd. 1F, 2F, 3F, #402, 14, Samsung 1ro 1-gil, Hwaseong-si, Gyeonggi-do, South Korea, 445-170 Date: Oct. 27, 2015 SIEMIC 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Letter of Authorization We, the undersigned, hereby authorize Harvey Sung of DT&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCCID: QIIRY1012WA including signing of all documents relating to these matters. Any and all acts carried out by DT&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Rayence Co., Ltd. “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Namyoung Ha Assistant Manager

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 3 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 3 Rev 5.0 October 27, 2015 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, Rayence Co., Ltd. hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): (Medical Image Processing Unit, 1012WCA) FCC ID: QIIRY1012WA Sincerely, Client’s signature: Client’s name / title: Namyoung Ha / Assistant Manager Contact information / address: +82-31-8015-6465 / 1F, 2F, 3F, #402, 14, Samsung 1ro 1-gil, Hwaseong-si, Gyeonggi-do, South Korea, 445-170

SCS-F19: Confidentiality Request Letter Page 1 of 4 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (current) 3.0 4.0 March-26-2015 SCS-F19: Confidentiality Request Letter Page 2 of 4 Rev 4.0 October 27, 2015 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: QIIRY1012WA We hereby request confidential treatment of information accompanying this application as outlined below: - e.g. Block Diagram - e.g. Schematics - e.g. Operational Description - e.g. Part List - e.g. Tune up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature: Client’s name / title: Namyoung Ha / Assistant Manager Contact information / address: +82-31-8015-6465 / 1F, 2F, 3F, #402, 14, Samsung 1ro 1-gil, Hwaseong-si, Gyeonggi-do, South Korea, 445-170

Company Letter head. WIFI Channel 12 & 13 Declaration Letter To whom it may concern : We have declared below featured for FCC equipment authorization in regard to 802.11b/g/n channel 12 & 13 operating capability for FCC ID : QIIRY1012WA Please check Product hardware does not have the capability to operate on channel 12 & 13 Product hardware has the capability to operate on channel 12 & 13. However , these 2 channels will be disabled via software and user will not able to enable these 2 channels Product hardware has the capability to operate on channel 12 & 13. And meeting KDB 594280 D01 requirement. Pls explain detail here. Others Pls explain detail here. Company Name: Rayence Co., Ltd. Address : 1F, 2F, 3F, #402, 14, Samsung 1ro 1-gil, Hwaseong-si, Gyeonggi-do, 445-170, Korea Name / Title : Namyoung Ha / Assistant Manager Signature : Phone : +82‐31‐8015‐6465 Email : [email protected] Date : Sep 1, 2015

FCCID: QIIRY1012WA Copyright Ⓒ 2015, DT&C Co., Ltd. Page 1 / 3 View 1 FCCID: QIIRY1012WA Copyright Ⓒ 2015, DT&C Co., Ltd. Page 2 / 3 View 2 FCCID: QIIRY1012WA Copyright Ⓒ 2015, DT&C Co., Ltd. Page 3 / 3 View 3

Page 1 of 1 Label and Location Model Name : 1012WCA FCC ID : QIIRY1012WA The FCC label shown is representative of the label that will appear on the radio when in production. Other information may also be included on this label. <Rear>

FCCID: QIIRY1012WA Copyright Ⓒ 2015, DT&C Co., Ltd. View 1 FCCID: QIIRY1012WA Copyright Ⓒ 2015, DT&C Co., Ltd. View 2 FCCID: QIIRY1012WA Copyright Ⓒ 2015, DT&C Co., Ltd. View 3 FCCID: QIIRY1012WA Copyright Ⓒ 2015, DT&C Co., Ltd. View 4 FCCID: QIIRY1012WA Copyright Ⓒ 2015, DT&C Co., Ltd. View 5 FCCID: QIIRY1012WA Copyright Ⓒ 2015, DT&C Co., Ltd. View 6 FCCID: QIIRY1012WA Copyright Ⓒ 2015, DT&C Co., Ltd. View 7 FCCID: QIIRY1012WA Copyright Ⓒ 2015, DT&C Co., Ltd. View 8 FCCID: QIIRY1012WA Copyright Ⓒ 2015, DT&C Co., Ltd. View 9 FCCID: QIIRY1012WA Copyright Ⓒ 2015, DT&C Co., Ltd. View 10

FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 2 /82 Test Report Version Test Report No. Date Description DRTFCC1411-1504(3) Oct. 30, 2015 Initial issue FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 3 /82 Table of Contents 1. DESCRIPTION OF DEVICE .......................................................................................................... 5 1.1 Guidance Applied ................................................................................................................... 6 1.2 Device Overview .................................................................................................................... 6 1.3 Nominal and Maximum Output Power Specifications ............................................................ 6 1.4 DUT Antenna Locations ......................................................................................................... 7 1.5 SAR Test Exclusions Applied ................................................................................................. 7 1.6 Power Reduction for SAR ...................................................................................................... 7 1.7 Device Serial Numbers .......................................................................................................... 7 2. INTROCUCTION ........................................................................................................................... 8 3. DESCRIPTION OF TEST EQUIPMENT ....................................................................................... 9 3.1 SAR MEASUREMENT SETUP .............................................................................................. 9 3.2 EX3DV4 Probe Specification ............................................................................................... 10 3.3 Probe Calibration Process ................................................................................................... 11 3.3.1 E-Probe Calibration ......................................................................................................... 11 3.4 Data Extrapolation ................................................................................................................ 12 3.5 SAM Twin PHANTOM .......................................................................................................... 13 3.6 Device Holder for Transmitters ............................................................................................. 13 3.7 Brain & Muscle Simulation Mixture Characterization ........................................................... 14 3.8 SAR TEST EQUIPMENT ..................................................................................................... 15 4. TEST SYSTEM SPECIFICATIONS ............................................................................................. 16 5. SAR MEASUREMENT PROCEDURE ........................................................................................ 17 5.1 Measurement Procedure ...................................................................................................... 17 6. RF EXPOSURE LIMITS .............................................................................................................. 18 7. FCC MEASUREMENT PROCEDURES...................................................................................... 19 7.1 Measured and Reported SAR ................................. ............................................................. 19 7.2 SAR Testing with 802.11 Transmitters ................................................................................. 19 7.2.1 General Device Setup ..................................................................................................... 19 7.2.2 Initial Test Position Procedure ......................................................................................... 19 7.2.3 2.4 GHz SAR Test Requirements .................................................................................... 20 7.2.4 OFDM Transmission Mode and SAR Test Channel Selection ........................................ 20 7.2.5 Initial Test Configuration Procedure ................................................................................ 20 7.2.6 Subsequent Test Configuration Procedures .................................................................... 21 7.2.7 Simultaneous Transmission of MIMO Chains ................................................................. 21 8. RF CONDUCTED POWERS ....................................................................................................... 22 8.1 WLAN Conducted Powers ................................................................................................... 22 9. SYSTEM VERIFICATION ............................................................................................................ 27 9.1 Tissue Verification ................................................................................................................ 27 9.2 Test System Verification ....................................................................................................... 28 10. SAR TEST RESULTS ............................................................................................................... 29 10.1 Head SAR Results ............................................................................................................. 29 10.2 Body SAR Results .............................................................................................................. 30 10.3 SAR Test Notes .................................................................................................................. 31 11. SAR MEASUREMENT VARIABILITY .................................................................................…

Text truncated - open the document above for the full version.

FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 52 /82 Attachment 2. – Dipole Calibration Data FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 53 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 54 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 55 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 56 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 57 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 58 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 59 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 60 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 61 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 62 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 63 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 64 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 65 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 66 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 67 /82

FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 68 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 69 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 70 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 71 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 72 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 73 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 74 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 75 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 76 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 77 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 78 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 79 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 80 /82 FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 81 /82 Attachment 3. – SAR SYSTEM VALIDATION FCC ID: QIIRY1012WA Report No.: DRTFCC1411-1504(3) TRF-RF-601(01)151016 Prohibits the copying and re-issue of this report without DT&C approval. Pages: 82 /82 SAR System Validation Per FCC KDB 865664 D02v01r02, SAR system validation status should be documented to confirm measurement accuracy. The SAR systems (including SAR probes, system components and software versions) used for this device were validated against its performance specifications prior to the SAR measurements. Reference dipoles were used with the required tissue- equivalent media for system validation, according to the procedures outlined in FCC KDB 865664 D01v01r04 and IEEE 1528-2013.Since SAR probe calibrations are frequency dependent, each probe calibration point was validated at a frequency within the valid frequency range of the probe calibration point, using the system that normally operates with the probe for routine SAR measurements and according to the required tissue-equivalent media. A tabulated summary of the system validation status including the validation date(s), measurement frequencies, SAR probes and tissue dielectric parameters has been included. Table Attachment 3.1 SAR System Validation Summary SAR System Freq. [MHz] Date Probe SN Probe Type Probe CAL. Point PERM. COND. CW Validation MOD. Validation (εr) (σ) Sensi- tivity Probe Linearity Probe Isortopy MOD. Type Duty Factor PAR F 2450 2015-10-05 3933 EX3DV4 2450 Head 38.920 1.805 PASS PASS PASS OFDM N/A PASS F 5200 2015-10-06 3933 EX3DV4 5200 Head 36.350 4.703 PASS PASS PASS OFDM N/A PASS F 2450 2015-10-05 3933 EX3DV4 2450 Body 52.630 1.995 PASS PASS PASS OFDM N/A PASS F 5200 2015-10-06 3933 EX3DV4 5200 Body 48.920 5.222 PASS PASS PASS OFDM N/A PASS NOTE: While the probes have been calibrated for both a CW and modulated signals, all measurements were performed using communication systems calibrated for CW signals only. Modulations in the table above represent test configurations for which the measurement system has been validated per FCC KDB Publication 865664 D01v01r04 for scenarios when CW probe calibrations are used with other signal types.SAR systems were validated for modulated signals with a periodic duty cycle, such as GMSK, or with a high peak to average ratio (>5 dB), such as OFDM according to KDB 865664.

Report No.: DRTFCC1411-1504(3) FCC ID: QIIRY1012WA Date of issue: Oct. 30, 2015 Copyright Ⓒ 2015, DT&C Co., Ltd. SAR Test Setup Photographs  Head SAR Test Photo  Body SAR Test Photo Report No.: DRTFCC1411-1504(3) FCC ID: QIIRY1012WA Date of issue: Oct. 30, 2015 Copyright Ⓒ 2015, DT&C Co., Ltd.  Test Setup Photo (Head SAR Test Photo) Report No.: DRTFCC1411-1504(3) FCC ID: QIIRY1012WA Date of issue: Oct. 30, 2015 Copyright Ⓒ 2015, DT&C Co., Ltd.  Test Setup Photo(Front) Report No.: DRTFCC1411-1504(3) FCC ID: QIIRY1012WA Date of issue: Oct. 30, 2015 Copyright Ⓒ 2015, DT&C Co., Ltd.  Test Setup Photo (Body SAR Test Photo) Report No.: DRTFCC1411-1504(3) FCC ID: QIIRY1012WA Date of issue: Oct. 30, 2015 Copyright Ⓒ 2015, DT&C Co., Ltd. Test Setup Photo(Front)

Report No.: DRTFCC1411-1504(3) FCC ID: QIIRY1012WA Date of issue: Oct. 30, 2015 Copyright Ⓒ 2015, DT&C Co., Ltd. SAR Plots  Verification Plots  SAR Test Plots DT&C Co., Ltd. DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN:726 Communication System: CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.78 S/m; ε r = 40.293; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: Probe: EX3DV4 - SN3933; ConvF(7.51, 7.51, 7.51); Calibrated: 9/29/2015; ; Electronics: DAE4 Sn1396 Phantom: ELI v5.0_2013_10_08; Type: QDIVA001BB; Serial: 1223 Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) Test Date: 2015-10-28; Ambient Temp: 21.1; Tissue Temp: 21.6 2450 MHz System Verification Area Scan (61x81x1): Interpolated grid: dx=12mm, dy=12mm Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = 0.01 dB Peak SAR (extrapolated) = 28.8 W/kg SAR(1 g) = 13.4 W/kg; SAR(10 g) = 6.08 W/kg 0 dB = 19.1 W/kg DT&C Co.…

Text truncated - open the document above for the full version.