QIIRY1417WGBIndustrial Image Processing Unit

1 R-USM-503 1417WGB User / Installation Manual Version 0 Date: 2014-01-02 2 R-USM-503 © Copyright 2014, Rayence Co. Ltd. All pages of this document contain proprietary and confidential information of Rayence Corporation and are intended for exclusive use by Rayence Corporation personnel or customers. Copying, disclosure to others or other use is prohibited without the express written authorization from Rayence Corporation. Please report any violations of requirement to Rayence Corporation. 3 R-USM-503 Attention For improvement of product performance, supplementation, or follow-up of information; the contents of this manual are subject to change without separate prior notice. Please note that our company has neither responsibility for any accidents nor obligation to do free repair service for any damage of the equipment due to user's mistake, which resulted from failure to follow the contents in this manual. Make sure to be familiar with the safety precautions and usage procedures. Also note that the product may slightly differ from the contents of this manual depending on specification. The following marks are used for the effective use of the product in this manual. Attention, consult accompanying documents. This is used to emphasize essential information. Be sure to read this information to avoid incorrect operation. This indicates hazardous situation which, if not heeded, may result in minor or moderate injury to you or others, or may result in machine damage. This indicates a potentially hazardous situation which, if not heeded, could result in death or serious injury to you or others. Federal Law restricts this device to sale by or the order of a radiologist or any other practitioners licensed by the law of the state in which that person practices to use or order the use of the device. 4 R-USM-503 Contents 1. Introduction...................................................................................... 5 (1) Overview .......................................................................................... 5 (2) Product features .............................................................................. 5 (3) Product component ........................................................................ 6 (4) Components Description ............................................................... 8 (5) Warning .......................................................................................... 11 (6) Caution ........................................................................................... 13 2. Notes for Using the Detector ........................................................ 15 (1) Handling ......................................................................................... 15 (2) Handle Assembly .......................................................................... 15 (3) Before Exposure............................................................................ 16 (4) During Exposure ........................................................................... 16 (5) Disinfection and Cleaning ............................................................ 16 (6) Others ............................................................................................. 16 3. Technical Features ........................................................................ 17 (1) Mechanical Features ..................................................................... 17 (2) Electrical Features ........................................................................ 17 (3) Environmental requirement ......................................................... 19 (4) PC Requirements .......................................................................... 20 4. Installation ..................................................................................... 21 (1) Program setup ............................................................................... 21 (2) Connection (Manual Trigger) ....................................................... 22 (3) Connection (Auto Trigger) ............................................................ 30 (4) IP set up ......................................................................................... 34 (5) Checking Connection ................................................................... 34 (6) Using Web Manager (IP, SSID Change / Upgrade FW) .............. 35 5. Calibration ...................................................................................... 39 (1) General Principle ........................................................................... 39 (2) Calibration ...................................................................................... 41 6. Image Acquisition Test.................................................................. 46 (1) Get Image ....................................................................................... 46 (2) View Images ................................................................................... 47 7. Operation ........................................................................................ 52 (1) Recommend ................................................................................... 52 (2) Switching power on / off ............................................................... 52 (3) Storage ........................................................................................... 52 8. Radio Frequency compliance ........................................................ 53 (1) FCC Notice (U.S.A) ........................................................................ 53 (2) IC Notice (CANADA) ...................................................................... 55 (3) R&TTE Notice (European Union) ................................................. 56 9. Maintenance .................................................................................. 57 (1) Maintenance ................................................................................... …

Text truncated - open the document above for the full version.

D a To wh We he The m and 4 This h theref of the Radiat system Best r Si n Namy Assis ate: March 14 hom it may c ereby declar modular test 4.76dBi in the host device u fore the limi ese antennas ted spurious m level tests regards, ncerely, young Ha stant Mana 4, 2014 A concern: re that reports allo e 5GHz band uses a PCB a ts used for t s with equal s emissions w . ager 1F, 2F, Attestatio w for a max ds. antenna with the output p or lower ga were tested 3F, #402, 14, S on for M ximum gain h a gain of - power and p ain. for the hos t Ray Samsung 1ro 1 MODULE of the PIFA -0.21dBi in th power spectr t system so yence C 1-gil, Hwaseon INCORP antenna to b he 2.4GHz b ral density in the different o., Ltd. ng-si, Gyeongg ORATION be 3.0dBi/3.6 band and 2.9 n the modula t antenna ty gi-do, South Ko N 62dBi in the 96dBi in the ar test repor ype is covere orea, 445-170 2.4GHz ban 5.2GHz ban rts allow use ed by the nd ds, e

Rayence Co., Ltd. 1F, 2F, 3F, #402, 14, Samsung 1ro 1-gil,Hwaseong-si, Gyeonggi-do, South Korea, 445-170 Date: March 3, 2014 Attestation Letter for FCC ID: QIIRY1417WGB To whom it may concern: We hereby declare that The company Rayence Co., Ltd as being manufacturer of model 1417WGB hereby states that the model uses a certified module with 2.4GHz & 5GHz bands (FCC ID: PPD-AR5BHB116 -> QIIRY1417WGB). Modular Test report Information, 1. DTS test report - Tested site: SPORTON International Inc. - Report Date & number: FR080603A 2. NII Test report - Tested site: SPORTON International Inc. - Report Date & number: FR080603B Best regards, Sincerely, Namyoung Ha Assistant Manager Rayence Co., Ltd. 1F, 2F, 3F, #402, 14, Samsung 1ro 1-gil,Hwaseong-si, Gyeonggi-do, South Korea, 445-170 Date: March 3, 2014 Attestation Letter for FCC ID: QIIRY1417WGB To whom it may concern: We hereby declare that The company Rayence Co., Ltd product 1417WGB (FCC ID: QIIRY1417WGB) in the RF module (FCC ID: PPD-AR5BHB116) does not use DFS band. Best regards, Sincerely, Namyoung Ha Assistant Manager D a To wh We he The co QIIRY modu use th the ch of the levera applie radio consi d Radi o All ot Best r Si n Namy Assis ate: March 3 hom it may c ereby declar ompany Ray Y1417WGB i ular transmitt he in origina hange in ant e radio modu aged the mo ed to the en characterist i dered as the module FCC her characte regards, ncerely, young Ha stant Mana , 2014 A concern: re that yence Co., L s incorporat ter, FCC ID : al certified tr tenna of the ule, the host odular report d product w ics. So, we c e same result C ID : PPD-A eristics relate ager 1F, 2F, Attestatio Ltd declare t te Radio tran PPD-AR5BH ransmitter m e module du t product FC t for the con without any c concluded th t in the end AR5BHB116 ed with radia 3F, #402, 14, S on for M hat the equ nsmitter mod HB116. The module and w ring the fina CC authoriza nducted test changes suc hat the cond product. ated was eva Ray Samsung 1ro 1 MODULE ipment unde dule which h end produc will keep the al end produ tion is requi t data becau h as max. R ducted test it aluated in th yence C 1-gil, Hwaseon INCORP er FCC autho has been au ct (FCC ID : Q e original au uct assembly ired. For the se the origi n F output pow tems of the he final end o., Ltd. ng-si, Gyeongg ORATION orization pro thorized by QIIRY1417W thorization c y. Due to the host produ nal operating wer and freq radio modu product co n gi-do, South Ko N ocessing FCC FCC as sing WGB) will condition ex e change in ct testing, w g condition quencies and le were ndition. orea, 445-170 C ID : le xcept antenna we is d other

Rayence Co., Ltd. 1F, 2F, 3F, #402, 14, Samsung 1ro 1-gil, Hwaseong-si, Gyeonggi-do, South Korea, 445-170 Date: March 3, 2014 Letter of Authorization We, the undersigned, hereby authorize Harvey Sung of Digital EMC Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCCID: QIIRY1417WGB including signing of all documents relating to these matters. Any and all acts carried out by Harvey Sung of Digital EMC Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Rayence Co., Ltd.. “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Namyoung Ha Assistant Manager

Digital EMC Co., Ltd. 42, Yurim-ro, 154beon-gil, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea 449-935 Date: March 3, 2014 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Claire Hoque/Application Examiner of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Claire Hoque of CCS on our behalf shall have the same effect as acts of our own. In authorizing CCS as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards;

Rayence Co., Ltd. 1F, 2F, 3F, #402, 14, Samsung 1ro 1-gil, Hwaseong-si, Gyeonggi-do, South Korea, 445-170 Date: March 3, 2014 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA RE: Request of Confidentiality for FCCID: QIIRY1417WGB To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Rayence Co., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give Rayence Co., Ltd. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Schematics 3 Part Lists 4 Operation Description SHORT-TERM 5 Internal Photos 6 External Photos 7 Test-Setup Photos 8 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Namyoung Ha Assistant Manager

FCCID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. Page 1 / 4 View 1 FCCID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. Page 2 / 4 View 2 FCCID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. Page 3 / 4 View 3 FCCID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. Page 4 / 4 View 4

FCC ID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase - The FCC label shown is representative of the label that will appear on the radio when in production. Other information may also be included on this label.

FCCID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. View 1 FCCID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. View 2 FCCID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. View 3 FCCID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. View 4 FCCID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. View 5 FCCID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. View 6 FCCID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. View 7 FCCID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. View 8 FCCID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. View 9 FCCID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. View 10 FCCID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. View 11 FCCID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. View 12 <WLAN ANT>

The MPE calculation for this exposure is shown below. - ±± Directional antenna gainDirectional antenna gain 0.612 dBi dBm Max. 2.4GHz Band DTS5GHz Band NII Target power & Tolerance Target Power : 25.0 48.978 0.064 Antenna gain (G) -2.949 dBiMax. 0.508 numeric 13.9 Tolerance :3 dBTolerance : Max. dBm 3dB 22.0 dBm ~10.9 dBm ~ 16.9 dBm Target Power : Copyright ⓒ 2014, Digital EMC Co., Ltd. Aggregated Power (P) 28.000 dBmMax. 16.900 dBm 630.958 mWmW Aggregated PowerAggregated Power 1.152 numeric Calculated power density mW/cm 2 0.012 mW/cm 2 =S Note S = Maximum power dencity(mW/cm 2 ) FCC ID:QIIRY1417WGB RF Exposure Calculation The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the us Power density at the specific separation P G / ( 4 R 2 π ) P = Power input to the antenna(mW) The power desity at 20cm does not exceed the 1.0mW/cm 2 . G = Numeric power gain of the antenna R = Distance to the center of the radiation of the antenna(20cm) Conclusion : The exposure condition of this device is compliant with FCC rules. The maximum permissible exposure(MPE) of the general population/Uncontrolled for this device is 1.0 mW/cm 2 28.0 dBm

DEMC1401-00237, DEMC1401-00246 FCC ID: QIIRY1417WGB Report No.: DRTFCC1403-0353(1) IC: 10742A-1417WGB TRF-RF-222(00)140218 Page 2 / 49 Copyright ○ C 2014, Digital EMC Co., Ltd. Test Report Version Test Report No. Date Description DRTFCC1403-0353 Mar. 11, 2014 Initial issue DRTFCC1403-0353(1) Mar. 17, 2014 Update peak Excursion DEMC1401-00237, DEMC1401-00246 FCC ID: QIIRY1417WGB Report No.: DRTFCC1403-0353(1) IC: 10742A-1417WGB TRF-RF-222(00)140218 Page 3 / 49 Copyright ○ C 2014, Digital EMC Co., Ltd. CONTENTS 1.EUT DESCRIPTION .................................................................... 4 2. INFORMATION ABOUT TESTING ............................................. 5 2.1 Test mode ............................................................................... 5 2.2 Tested channel information ..................................................... 5 2.3 Auxiliary equipment ................................................................ 6 2.4 Tested environment ................................................................ 6 2.5 EMI Suppression Device(s) / Modifications ............................ 6 3. SUMMARY OF TESTS ............................................................... 7 4. TEST METHODOLOGY ............................................................. 8 4.1 EUT configuration .................................................................. 8 4.2 EUT exercise .......................................................................... 8 4.3 General test procedures ......................................................... 8 4.4 Description of test modes ....................................................... 8 5. INSTRUMENT CALIBRATION ................................................... 9 6. FACILITIES AND ACCREDITATIONS ........................................ 9 6.1 Facilities ................................................................................. 9 6.2 Equipment .............................................................................. 9 7. ANTENNA REQUIREMENTS ..................................................... 9 8. TEST RESULT ......................................................................... 10 8.1 Emission Bandwidth(26 dB Bandwidth) ................................ 10 8.2 Maximum Conducted Output Power ...................................... 11 8.3 Peak Power Spectral Density ............................................... 13 8.4 Peak Excursion Ratio ........................................................... 14 8.5 Frequency Stability ............................................................... 27 8.6 Radiated Spurious Emission Measurements ........................ 28 8.7 AC Conducted Emissions ..................................................... 34 8.8 Occupied Bandwidth ............................................................ 35 9. LIST OF TEST EQUIPMENT .................................................... 46 APPENDIX I ................................................................................. 47 DEMC1401-00237, DEMC1401-00246 FCC ID: QIIRY1417WGB Report No.: DRTFCC1403-0353(1) IC: 10742A-1417WGB TRF-RF-222(00)140218 Page 4 / 49 Copyright ○ C 2014, Digital EMC Co., Ltd. 1.EUT DESCRIPTION FCC Equipment Class Unlicensed National Information Infrastructure (UNII) Product Industrial Image Processing Unit Model Name 1417WGB Add Model Name N/A Power Supply DC 11.1 V Frequency Range Band I(5150 ~ 5250MHz) ▪ 802.11a/n(HT20): 5180 ~ 5240 MHz ▪ 802.11n(HT40): 5190 ~ 5230 MHz Modulation type ▪ 802.11a/n: OFDM Transmissions category Completely uncorrelated signal Antenna Specification Antenna type: Internal Antenna Antenna gain ▪ Band I: ANT 1 : 2.960 dBi & ANT 2 : - 4.870 dBi Antenna configuration ▪ 802.11a: Multiple Transmitting (ANT 1 and ANT 2) ▪ 802.11n(MCS0 ~ 7) : Multiple Transmitting (ANT 1 and ANT 2) DEMC1401-00237, DEMC1401-00246 FCC ID: QIIRY1417WGB Report No.: DRTFCC1403-0353(1) IC: 10742A-1417WGB TRF-RF-222(00)140218 Page 5 / 49 Copyright ○ C 2014, Digital EMC Co., Ltd. 2. INFORMATION ABOUT TESTING 2.1 Test mode 5GHz Band Mode Worst data rate Band I 802.11a 6 Mbps 802.11n(HT20) MCS 0 802.11n(HT40) MCS 0 The worst case data rate for each modulation is determined as above test mode. And all tests conducted in this report were made at the worst case data rate of each modulation. 2.2 Tested channel information 5GHz Band 802.11a/n(HT20) 802.11n(HT40) Channel Frequency [MHz] Channel Frequency [MHz] Band I 36 5180 38 5190 40 5220 - - 48 5240 46 5230 DEMC1401-00237, DEMC1401-00246 FCC ID: QIIRY1417WGB Report No.: DRTFCC1403-0353(1) IC: 10742A-1417WGB TRF-RF-222(00)140218 Page 6 / 49 Copyright ○ C 2014, Digital EMC Co., Ltd. 2.3 Auxiliary equipment Equipment Model No. Serial No. Manufacturer Note Laptop PP22L H7R1GBX DELL FCC DoC - - - - - 2.4 Tested environment Temperature : 23 ~ 24 o C Relative humidity content : 40 ~ 48 % R.H. Details of power supply : DC 11.1 V 2.5 EMI Suppression Device(s) / Modifications EMI suppression device(s) added and/or modifications made during testing → None DEMC1401-00237, DEMC1401-00246 FCC ID: QIIRY1417WGB Report No.: DRTFCC1403-0353(1) IC: 10742A-1417WGB TRF-RF-222(00)140218 Page 7 / 49 Copyright ○ C 2014, Digital EMC Co., Ltd. 3. SUMMARY OF TESTS FCC Part Section(s) RSS Section(s) Parameter Limit Test Condition Status Note 1 I. Transmitter Mode (TX) 15.407(a) N/A Emission Bandwidth (26 dB Bandwidth) N/A Conducted NT Note 3 15.407(a) RSS-210 [A9.2] Maximum Conducted Output Power 5150 ~ 5250MHz For FCC 50mW or < 4 + 10log 10 (B) dBm, whichever power is less. 5150 ~ 5250MHz For IC 200mW or <10 + 10log 10 (B) dBm, whichever power is less. 5250 ~ 5350MHz For FCC & IC 250mW or <11 + 10log 10 (B) dBm, whichever power is less. 5470 ~ 5725MHz For FCC & IC 250mW or <11 + 10log 10 (B) dBm, whichever power is less. C 15.407(a) RSS-210 [A9.2] Peak Power Spectral Density 5150 ~ 5250MHz For FCC: 4dBm/MHz 5150 ~ 5250MHz For IC: 10dBm/MHz 5250 ~ 5350MHz For FCC & IC: 11dBm/MHz 5470 ~ 5725MHz For FCC & IC: 11dBm/MHz N…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL INC. Page Number : 1 of 201 TEL : 886-3-327-3456 Report Issued Date : Sep. 16, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : PPD-AR5BHB116 IC : 4104A-AR5BHB116 FCC/IC RF Test Report Report No. : FR080603B FCC/IC RF Test Report APPLICANT : Atheros Communications, Inc. EQUIPMENT : AR5BHB116 2x2 802.11n PCIe module BRAND NAME : Atheros MODEL NAME : AR5BHB116 FCC ID : PPD-AR5BHB116 IC : 4104A-AR5BHB116 STANDARD : FCC Part 15 Subpart E IC RSS-210 Issue 7 CLASSIFICATION : Unlicensed National Information Infrastructure (UNII) The WiFi module was tested on extended card inserted to a host laptop PC. The product was received on Aug. 06, 2010 and completely tested on Sep. 06, 2010. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI C63.4-2003 and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Anderson Chiu / Deputy Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page Number : 2 of 201 TEL : 886-3-327-3456 Report Issued Date : Sep. 16, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : PPD-AR5BHB116 IC : 4104A-AR5BHB116 FCC/IC RF Test Report Report No. : FR080603B TABLE OF CONTENTS REVISION HISTORY .......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1 Applicant ............................................................................................................................................ 5 1.2 Manufacturer ...................................................................................................................................... 5 1.3 Testing Site Facilities ......................................................................................................................... 5 1.4 Applied Standards ............................................................................................................................. 5 1.5 Ancillary Equipment List .................................................................................................................... 6 2 EQUIPMENT UNDER TEST ........................................................................................................................ 7 2.1 General Information of EUT ............................................................................................................... 7 2.2 Carrier Frequency Channel ............................................................................................................... 8 2.3 Maximum Output Power .................................................................................................................... 9 2.4 Antenna Information ........................................................................................................................ 11 2.5 Worst-case Configuration and Test Mode ....................................................................................... 12 2.6 Connection Diagram of Test System ............................................................................................... 13 2.7 RF Utility .......................................................................................................................................... 13 3 TEST RESULT ........................................................................................................................................... 14 3.1 26dB & 99% Bandwidth Measurement ............................................................................................ 14 3.2 Power Spectral Density Measurement ............................................................................................ 43 3.3 Average Power Measurement ......................................................................................................... 72 3.4 Output Power Measurement ............................................................................................................ 75 3.5 Conducted Spurious Emission Measurement ............................................................................... 103 3.6 Band Edges Measurement ............................................................................................................ 110 3.7 Peak Excursion Ratio Measurement ............................................................................................. 118 3.8 Frequency Stability Requirement .................................................................................................. 133 3.9 Radiated Emission Measurement .................................................................................................. 134 3.10 AC Conducted Emission Measurement......................................................................................... 192 3.11 Automatically Discontinue Transmission ....................................................................................... 198 4 LIST OF MEASURING EQUIPMENTS.................................................................................................... 199 5 UNCERTAINTY OF EVALUATION ......................................................................................................... 200 APPENDIX A. ANTENNA REQUIREMENT APPENDIX B. PHOTOGRAPHS OF EUT APPENDIX C. SETUP PHOTOGRAPHS SPORTON INTERNATIONAL INC. Page Number : 3 of 201 TEL : 886-…

Text truncated - open the document above for the full version.

FCC ID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. Test Setup photographs EUT Position: X-axis EUT Position: Y-axis EUT Position: Z-axis FCC ID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. Test Setup Photo of Radiated Measurement (0.009 ~ 30MHz) FCC ID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. Test Setup Photo of Radiated Measurement (below 1000MHz) FCC ID: QIIRY1417WGB Copyright Ⓒ 2014, Digital EMC Co., Ltd. Test Setup Photo of Radiated Measurement (Above 1GHz)