QIIRY1417WCAMedical Image Processing Unit

Release Version 1.0.0 Medical Image Processing Unit 1417WCA User Manual R-M-014-130312 © Copyright 2012, Rayence Co. Ltd. All pages of this document contain proprietary and confidential information of Rayence Corporation and are intended for exclusive use by Rayence Corporation personnel or customers. Copying, disclosure to others or other use is prohibited without the express written authorization from Rayence Corporation. Please report any violations of requirement to Rayence Corporation. R-M-014-130312 Attention For improvement of product performance, supplementation, or follow-up of information; the contents of this manual are subject to change without separate prior notice. Please note that our company has neither responsibility for any accidents nor obligation to do free repair service for any damage of the equipment due to user's mistake, which resulted from failure to follow the contents in this manual. Make sure to be familiar with the safety precautions and usage procedures. Also note that the product may slightly differ from the contents of this manual depending on specification. The following marks are used for the effective use of the product in this manual. Attention, consult accompanying documents. This is used to emphasize essential information. Be sure to read this information to avoid incorrect operation. This indicates hazardous situation which, if not heeded, may result in minor or moderate injury to you or others, or may result in machine damage. This indicates a potentially hazardous situation which, if not heeded, could result in death or serious injury to you or others. Federal Law restricts this device to sale by or the order of a radiologist or any other practitioners licensed by the law of the state in which that person practices to use or order the use of the device. R-M-014-130312 Contents Introduction ........................................................................................ 1 Intended use ...................................................................................... 1 Product features ................................................................................ 2 Product components ......................................................................... 3 Components Description................................................................... 5 Warning .............................................................................................. 8 Caution ............................................................................................. 10 Marking and labeling symbols ........................................................ 12 Notes for Using the Detector ............................................................ 14 Preparing .......................................................................................... 14 Handling ........................................................................................... 15 Handle Assembly ............................................................................. 15 Before Exposure .............................................................................. 17 During Exposure .............................................................................. 17 Limit of Load .................................................................................... 19 Disinfection and Cleaning ............................................................... 20 Others ............................................................................................... 20 Technical Features ........................................................................... 21 Mechanical Features ........................................................................ 21 Electrical Features ........................................................................... 21 Environmental requirement ............................................................. 24 PC Requirements ............................................................................. 25 Installation........................................................................................ 26 General interface ............................................................................. 26 Connection ....................................................................................... 27 IP set up ........................................................................................... 32 Using Web Manager (IP, SSID Change / Upgrade FW) ................... 33 Calibration ........................................................................................ 37 General Principle ............................................................................. 37 Calibration ........................................................................................ 39 Image Acquisition Test ..................................................................... 44 Program setup ................................................................................. 44 Get Image ......................................................................................... 45 View Images ..................................................................................... 46 Operation .......................................................................................... 51 Recommend ..................................................................................... 51 Switching power on / off .................................................................. 51 Storage ............................................................................................. 51 Information ....................................................................................... 52 Safety standard ................................................................................ 52 Electromagnetic Compatibility Information .................................... 54 Radio Frequency compliance.......................................................... 59 Maintenance ......…

Text truncated - open the document above for the full version.

ATTESTATION LETTER For FCC ID: PPD-AR5BHB116 Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 September 12 th, 2012 TO WHOM IT MAY CONCERN The company Rayence Co., Ltd as being manufacturer of model 1417WCA hereby states that the model uses a certified module with 2.4GHz & 5GHz bands (FCC ID: PPD-AR5BHB116 -> QIIRY1417WCA). Modular Test report Information, 1. DTS test report - Tested site: SPORTON International Inc. - Report Date & number: FR080603A 2. NII Test report - Tested site: SPORTON International Inc. - Report Date & number: FR080603B Best regards, Company : Rayence Co., Ltd. Type Name: Namyoung, Ha Title: Assistant Manager

ATTESTATION LETTER For FCC ID: QIIRY1417WCA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 March 8, 2013 TO WHOM IT MAY CONCERN The company Rayence Co., Ltd product 1417WCA (FCC ID: QIIRY1417WCA) in the RF module (FCC ID: PPD-AR5BHB116) does not use DFS band. Best regards, Company : Rayence Co., Ltd. Type Name: Namyoung, Ha Title: Assistant Manager

Date: March 8, 2013 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Mr. Sunghoon Baek/Application Examiner of UL-Korea, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Mr. Sunghoon Baek of UL-Korea on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Korea as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, Name & Title: Namyoung, Ha / Assistant Manager Company name: Rayence Co., Ltd Email: [email protected] REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

ATTESTATION FOR MODULE INCORPORATION Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 March 8, 2013 TO WHOM IT MAY CONCERN The company Rayence Co., Ltd declare that the equipment under FCC authorization processing FCC ID : QIIRY1417WCA is incorporate Radio transmitter module which has been authorized by FCC as single modular transmitter, FCC ID : PPD-AR5BHB116. The end product (FCC ID : QIIRY1417WCA) will use the in original certified transmitter module and will keep the original authorization condition except the change in antenna of the module during the final end product assembly. Due to the change in antenna of the radio module, the host product FCC authorization is required. For the host product testing, we leveraged the modular report for the conducted test data because the original operating condition is applied to the end product without any changes such as max. RF output power and frequencies and other radio characteristics. So, we concluded that the below conducted test items of the radio module were considered as the same result in the end product. Radio module Items FCC ID : PPD-AR5BHB116 6dB bandwidth, Max.output power, Conducted spurious, Power spectral density All other characteristics related with radiated was evaluated in the final end product condition. Best regards, Company : Rayence Co., Ltd. Type Name: Namyoung, Ha Title : Assistant Manager

CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 February 19, 2013 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Rayence Co., Ltd requests confidentiality for the following products: FCC ID/ Number Product Title/Model QIIRY1417WCA / Medical Image Processing Unit (Telemetry System Transmitter) / 1417WCA The following exhibits contain trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our product. This material is not customarily available to the general public and we request that it be withheld from public inspection. We request that the following information submitted be held permanent confidential treatment. Permanent Confidential Request - Schematics - Block diagram - Part List, BOM, Part Location - Operational Description Short-term (180 days) Confidential Request - Antenna information - Internal photo - Service manual If you have any questions, please feel free to contact me at the address shown below. Best regards, Type Name: Keedock, Kim Title: Quality Manager Company name: Rayence Co., Ltd

Project Number: 12CA66727 File Number : MC16901 Page : 1 of 6 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. EXTERNAL PHOTOS OF EUT Front View Project Number: 12CA66727 File Number : MC16901 Page : 2 of 6 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Rear Project Number: 12CA66727 File Number : MC16901 Page : 3 of 6 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Side View - Right Project Number: 12CA66727 File Number : MC16901 Page : 4 of 6 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Side View - Left Project Number: 12CA66727 File Number : MC16901 Page : 5 of 6 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Battery Project Number: 12CA66727 File Number : MC16901 Page : 6 of 6 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL.

Project Number: 12CA66727 File Number : MC16901 Page : 1 of 2 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Label Information of EUT Project Number: 12CA66727 File Number : MC16901 Page : 2 of 2 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL.

Project Number: 12CA66727 File Number : MC16901 Page : 1 of 11 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. INTERNAL PHOTOS OF EUT Inside Project Number: 12CA66727 File Number : MC16901 Page : 2 of 11 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Main board Project Number: 12CA66727 File Number : MC16901 Page : 3 of 11 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Project Number: 12CA66727 File Number : MC16901 Page : 4 of 11 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. RF Module Project Number: 12CA66727 File Number : MC16901 Page : 5 of 11 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Project Number: 12CA66727 File Number : MC16901 Page : 6 of 11 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Project Number: 12CA66727 File Number : MC16901 Page : 7 of 11 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Project Number: 12CA66727 File Number : MC16901 Page : 8 of 11 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Sub board Project Number: 12CA66727 File Number : MC16901 Page : 9 of 11 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Project Number: 12CA66727 File Number : MC16901 Page : 10 of 11 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Antenna_ Location Project Number: 12CA66727 File Number : MC16901 Page : 11 of 11 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL.

Rayence 2012-01 Antenna PCB Dual-Band Antenna (Wi-Fi 2.4/5GHz) PRODUCT APPROVAL SHEET Version : 1.2 SuppliersCustomer WriterReviewApprovalApproved by 품명Rayence 2012-01 Dual Band PCB Antenna Part Number AEi-2450/5500DP-C1.13 [Rayence] DescriptionDual-Band(2.4/5GHz) /PCB /I-Pex SalesRodem Microsystem D RODEM MICROSYSTEM CO., LTD. (448-808) #401, Sangsaeng B/D, 253-1, Jukjeon-ro, Suji-gu, Yongin-si, Gyeonggi-do, KOREA Office : +82-31-715-9309 | Fax : +82-505-329-9309 E-mail :[email protected]| Website :www.rodemsys.co.kr (주)레이언스 2 Revised History Rayence 2012-01 Antenna - PRODUCT APPROVAL SHEET VersionPurposeDateEditor V 1.0Initial Doc2012/05/09배재균 V 1.12 nd Rework & Test2012/07/03배재균 V 1.2 Appendix-A (Correlated & Uncorrelated) 2013/01/18배재균 3 1. SPECIFICATION ELECTRICAL SPECIFICATIONS MODEL AEi-2450/5500DP-C1.13 [Rayence] (MHz)2.4~2.5GHz / 5.2~5.8GHGz V.S.W.RLESS THAN 1 : 5.0 GAIN(dBi) - 2.4GHz-0.60dBi GAIN(dBi) - 5.2GHz2.96dBi Radiation PatternOMNI-DIRECTIONAL POLARIZATIONLINEAR MECHANICAL SPECIFICATIONS SPECREMARK MOUNT TYPE3M TAPEATTACHED RADIATION TYPEDipole PCB CONNECTOR TYPEU.FLGOLD-PLATING CABLE1.13Φ/70,90mmBLACK-Color MATERIALFR-4, 0.8T DIMENSION50x9x0.8 mm OPERATING TEMPERATURE(°C)-30°~+70° 1. 품명 : AEi–2450/5500DP-C1.13 2. 적용 : 본 사양서는 WiFi용 듀얼밴드 PCB ANTENNA에 대해 규정한다. 3. ANTENNA 사용 조건 □휴대 ■고정 □이동 □실외 ■실내 □기타 ( ) 4. ANTENNA 형상 첨부 도면과 같음. 5. 전기적 특성 및 성능 실 사용조건 또는 그에 상응하는 적합한 상태에서 다음을 만족 할 것. Rayence 2012-01 Antenna - PRODUCT APPROVAL SHEET 6. 기구적 사양 및 특성 4 7. 기타성능및특성 7.1 내진성(耐振性) ANTENNA를 SET에 결합한 상태로, 전진폭 1mm, 진동수 5-55Hz를 1분간 나누어 변화시키는 진동을 상하, 좌우, 전후 방향으로 2시간씩 가한 후 측 정하여, 각 부위에 이탈 등의 이상이 없고, 5항의 특성 및 성능을 만족할 것. 7.2 내온성(耐溫性) ANTENNA를 -30°C 및 70°C에 각각 96시간 방치한 후 측정하여 각부의 이탈, 변형 등의 이상이 없고, 5항의 특성 및 성능을 만족할 것. 7.3 내습성(耐濕性) ANTENNA를 주위온도 40°C, 상태습도 90~95%에 96시간 방치한 후, 상온상습 상태에서 측정하여 외관, 각부의 구조에 이상이 없고, 5항의 특성 및 성능을 만 족할 것. 8. 측정 및 검사 본 사양서에 정해진 사항 및 승인원상의 요구사항에 따르고, 당사 품질관리규 정에 적합 할 것. 단 7항의 사항은 발주자의 협의에 의해 생략할 수 있음. 9. 포 장 제품의 포장은 개별 포장 후, 적당한 BOX에 유동이 없도록 집합 포장한다. 10. 보 증 본 제품은 납입 후 1년 이내에, 설계 또는 제작상의 불량이라고 판단되는 결함 이 발생하였을 경우, 즉시 무상 수리 또는 교환해 줄 의무가 있다. Rayence 2012-01 Antenna - PRODUCT APPROVAL SHEET 5 2. Measurement 2.1. 3D-Measurement -. 안테나의 이득과 복사 패턴을 측정하는 장면 및 3D 복사 패턴을 측정하기 위한 안테나의 설치. -. Calibration 주파수 대역 : 2.4 ~ 6.0[GHz] -. 2D 복사패턴 Angle step : 05° -. 3D 복사패턴 Angle step : 15° Rayence 2012-01 Antenna - PRODUCT APPROVAL SHEET 6 3.1. Radiation Pattern / 상측-2.4GHz 3. SPEC Data Rayence 2012-01 Antenna - PRODUCT APPROVAL SHEET 7 3.2 Radiation Pattern / 상측-5GHz 3. SPEC Data Rayence 2012-01 Antenna - PRODUCT APPROVAL SHEET 8 3.3. Radiation Pattern / 하측–2.4GHz 3. SPEC Data Rayence 2012-01 Antenna - PRODUCT APPROVAL SHEET 9 3.4. Radiation Pattern / 하측–5GHz 3. SPEC Data Rayence 2012-01 Antenna - PRODUCT APPROVAL SHEET 10 4. 입력 임피던스 정합도(반사손실) 4. INPUT Impedance <4.1 상측안테나> <4.2 하측안테나> Rayence 2012-01 Antenna - PRODUCT APPROVAL SHEET 11 5. Antenna Dimension Rayence 2012-01 Antenna - PRODUCT APPROVAL SHEET 12 6. Antenna Image Rayence 2012-01 Antenna - PRODUCT APPROVAL SHEET 13 Appendix-A (Correlated & Uncorrelated) Rayence 2012-01 Antenna - PRODUCT APPROVAL SHEET Rayence PCB Antenna Correlated (802.11n) MIMO-1 (Peak Gain) MIMO-2 (Peak Gain) Total Gain 2.4GHz 2400-0.60-11.76-1.49 2450-0.21-12.12-1.26 2500-0.42-10.23-1.00 5GHz 52002.96-4.872.91 53002.99-3.573.33 54002.89-1.893.84 55001.95-1.173.54 56002.10-1.113.65 57001.86-3.672.54 58001.31-4.681.83 Rayence PCB Antenna Correlated (802.11 a/b/g) MIMO-1 (Peak Gain) MIMO-2 (Peak Gain) Total Gain 2.4GHz 2400-0.60-11.76-3.29 2450-0.21-12.12-2.95 2500-0.42-10.23-3.00 5GHz 52002.96-4.870.61 53002.99-3.570.85 54002.89-1.891.13 55001.95-1.170.66 56002.10-1.110.79 57001.86-3.67-0.08 58001.31-4.68-0.73

UL Korea, Ltd An organization dedicated 33 rd FL, Gangnam Finance Center, 737 to public safety and committed to Yeoksam-dong, Gangnam-gu, Seoul quality service for over 100 years 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Underwriters Laboratories Inc. www.ul.com/emc www.ulk.co.kr Project No.: 12CA66728 File No.: MC16901 Report No.: 12CA66728-4-FCC Date: February 14, 2013 Model No.: 1417WCA FCC ID.: QIIRY1417WCA IC: 10742A-1417WCA FCC Maximum Permissible Exposure Report in accordance with FCC Part 1 Subpart I §1.1307(b) & §1.1310, RSS-102 for Medical Image Processing Unit (Telemetry System Transmitter) RAYENCE CO., LTD 1F, 2F, 3F, #402, 14, Samsung 1ro 1-gil, Hwaseong-si, Gyeonggi-do, 445-170, Korea Copyright  2005 Underwriters Laboratories Inc. Underwriters Laboratories Inc. authorizes the above-named company to reproduce this Report provided it is reproduced in its entirety. Only those products bearing the UL Mark should be considered as being covered by UL. Project Number: 12CA66728 File Number : MC16901 Page : 2 of 15 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Summary of Test Results: The following tests were performed on a sample submitted for evaluation of compliance with FCC Part 1 Subpart I Section 1.1307(b) & 1.1310 No Reference Clause No. Conformance Requirements Result Verdict Remark 1 1.1307(b)(1) 1.1310 Maximum Permissible Exposure (Exposure of Humans to RF Fields) Complied Conclusion: The tests listed in the Summary of Testing section of this report have been performed and the results recorded by UL Korea Ltd. in accordance with the procedures stated in each test requirement and specification. The test list was determined by the Applicant as being applicable to the Equipment Under Test. As a result, the subject product has been verified to comply or not comply as noted in the Summary of Testing with each test specification. The test results relate only to the items tested. Witnessed By: Sung Hoon Baek, Senior Project Engineer Reviewed by Jeawoon Choi, WiSE Engineering Leader UL Verification Services- 3014ASEO UL Verification Services – 3014ASEO UL Korea Ltd. UL Korea Ltd. February 14, 2013 February 14, 2013 Project Number: 12CA66728 File Number : MC16901 Page : 3 of 15 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Test Report Details Witnessed By: UL Korea Ltd. 33 rd FL. GFC Center, 737 Yeoksam-dong, Gangnam-gu, Seoul, 135-984, Korea Test Site: CTK Co., Ltd. 386-1, Ho-Dong, Cheoin-Gu, Yongin-Si, Kyunggi-Do, Korea The test facility was deemed to have the environment and capabilities necessary to perform the tests included in the test package. Applicant: Rayence Co., Ltd 1F, 2F, 3F, #402, 14, Samsung 1ro 1-gil, Hwaseong-si, Gyeonggi-do, 445-170, Korea Manufacturer: Rayence Co., Ltd 1F, 2F, 3F, #402, 14, Samsung 1ro 1-gil, Hwaseong-si, Gyeonggi-do, 445-170, Korea Applicant Contact: Keedock, Kim Title: Quality Manager Phone: 82.31.80156459 E-mail: [email protected] Product Type: Medical Image Processing Unit (Telemetry System Transmitter) Model Number: 1417WCA Multiple Model Name N/A Trademark Test standards: FCC Part 1 I Section 1.1307(b) & 1.1310 Maximum Permissible Exposure Sample Serial Number: N/A Sample Receive Date: November 28, 2012 Testing Start Date: December 4, 2012 Date Testing Complete: January 25, 2013 Overall Results: Pass UL Korea Ltd. reports apply only to the specific test samples and test results submitted for UL’s review. All samples tested were in good operating condition throughout the entire test program. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. UL Korea Ltd. shall have no liability for any deductions, inferences or generalizations drawn by the client or others from UL Korea Ltd. issued reports. This report shall not be used to claim, constitute or imply product certification, approval, or any agency of the National Authorities. This report may contain test results that are not covered by the NVLAP or KOLAS accreditation. Project Number: 12CA66728 File Number : MC16901 Page : 4 of 15 Model Number: 1417WCA UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Report Directory 1. GENERAL PRODUCT INFORMATION ........................................................ 5 1.1. EQUIPMENT DESCRIPTION: ......................................................................................................... 5 1.2. DETAILS OF TEST EQUIPMENT (EUT): ........................................................................................ 5 1.3. EQUIPMENT CONFIGURATION: .................................................................................................... 5 1.4. TECHNICAL DATA: ..................................................................................................................... 5 1.5. ANTENNA INFORMATION: ........................................................................................................... 6 1.6. EQUIPMENT TYPE: ...................................................................................................................... 6 1.7. TECHNICAL DESCRIPTION AND DOCUMENTS: .............................................................................. 6 1.8. EQUIPMENT MARKING PLATE .......................................…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL INC. Page Number : 1 of 157 TEL : 886-3-327-3456 Report Issued Date : Sep. 16, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : PPD-AR5BHB116 IC : 4104A-AR5BHB116 FCC/IC RF Test Report Report No. : FR080603A FCC/IC RF Test Report APPLICANT : Atheros Communications, Inc. EQUIPMENT : AR5BHB116 2x2 802.11n PCIe module BRAND NAME : Atheros MODEL NAME : AR5BHB116 FCC ID : PPD-AR5BHB116 IC : 4104A-AR5BHB116 STANDARD : FCC Part 15 Subpart C §15.247 IC RSS-2…

Text truncated - open the document above for the full version.