QIPALS6A-ELTE Module

 M2M.GEMALTO.COM Cinterion ® ALS6A-E Hardware Interface Overview Version: 01.270a DocId: ALS6A-E_HIO_H_v01.270a GENERAL NOTE THE USE OF THE PRODUCT INCLUDING THE SOFTWARE AND DOCUMENTATION (THE "PROD- UCT") IS SUBJECT TO THE RELEASE NOTE PROVIDED TOGETHER WITH PRODUCT. IN ANY EVENT THE PROVISIONS OF THE RELEASE NOTE SHALL PREVAIL. THIS DOCUMENT CONTAINS INFORMATION ON GEMALTO M2M PRODUCTS. THE SPECIFICATIONS IN THIS DOCUMENT ARE SUBJECT TO CHANGE AT GEMALTO M2M'S DISCRETION. GEMALTO M2M GMBH GRANTS A NON- EXCLUSIVE RIGHT TO USE THE PRODUCT. THE RECIPIENT SHALL NOT TRANSFER, COPY, MODIFY, TRANSLATE, REVERSE ENGINEER, CREATE DERIVATIVE WORKS; DISASSEMBLE OR DECOMPILE THE PRODUCT OR OTHERWISE USE THE PRODUCT EXCEPT AS SPECIFICALLY AUTHORIZED. THE PRODUCT AND THIS DOCUMENT ARE PROVIDED ON AN "AS IS" BASIS ONLY AND MAY CONTAIN DEFICIENCIES OR INADEQUACIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, GEMALTO M2M GMBH DISCLAIMS ALL WARRANTIES AND LIABILITIES. THE RECIPIENT UNDERTAKES FOR AN UNLIMITED PERIOD OF TIME TO OBSERVE SECRECY REGARDING ANY INFORMATION AND DATA PROVIDED TO HIM IN THE CONTEXT OF THE DELIV- ERY OF THE PRODUCT. THIS GENERAL NOTE SHALL BE GOVERNED AND CONSTRUED ACCORDING TO GERMAN LAW. Copyright Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its con- tents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. Copyright © 2015, Gemalto M2M GmbH, a Gemalto Company Trademark Notice Gemalto, the Gemalto logo, are trademarks and service marks of Gemalto and are registered in certain countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corpora- tion in the United States and/or other countries. All other registered trademarks or trademarks mentioned in this document are property of their respective owners. ALS6A-E_HIO_H_v01.270a2015-03-10 Confidential / Released Cinterion ® ALS6A-E Hardware Interface Overview 2 Page 2 of 36 Document Name: Cinterion ® ALS6A-E Hardware Interface Overview Version: 01.270a Date: 2015-03-10 DocId: ALS6A-E_HIO_H_v01.270a Status Confidential / Released Cinterion ® ALS6A-E Hardware Interface Overview Contents 36 ALS6A-E_HIO_H_v01.270a2015-03-10 Confidential / Released Page 3 of 36 Contents 0Document History ....................................................................................................... 6 1Introduction ................................................................................................................. 7 1.1Supported Products ........................................................................................... 7 1.2Related Documents ........................................................................................... 7 1.3Terms and Abbreviations ................................................................................... 7 1.4Regulatory and Type Approval Information ..................................................... 10 1.4.1Directives and Standards .................................................................... 10 1.4.2SAR requirements specific to portable mobiles .................................. 13 1.4.3SELV Requirements ........................................................................... 14 1.4.4Safety Precautions .............................................................................. 14 2Product Concept ....................................................................................................... 15 2.1Key Features at a Glance ................................................................................ 15 2.2ALS6A-E System Overview ............................................................................. 18 3Application Interface................................................................................................. 19 3.1Operating Modes ............................................................................................. 20 3.2Power Supply ................................................................................................... 21 3.3USB Interface................................................................................................... 22 3.4UICC/SIM/USIM Interface ................................................................................ 23 3.5Pulse Code Modulation Interface (PCM) ......................................................... 25 3.6Analog-to-Digital Converter (ADC)................................................................... 25 3.7GPIO Interface ................................................................................................. 25 4Antenna Interfaces.................................................................................................... 26 4.1GSM/UMTS/LTE Antenna Interface................................................................. 26 4.1.1Antenna Installation ............................................................................ 27 5Mechanics, Mounting and Packaging ..................................................................... 28 5.1Mechanical Dimensions of ALS6A-E ............................................................... 28 6Sample Application................................................................................................... 30 7Reference Approval .................................................................................................. 32 7.1Reference Equipment for Type Approval ......................................................... 32 7.2Compliance with FCC Rules and Regulations ................................................. 33 8Appendix.................................................................................................................... 34 8.1List of Parts and Accessories...................................................…

Text truncated - open the document above for the full version.

gemalto X Gemalte M2M GmbH· Siemensdamm 50 • 13629 Be~in • Germany Federal Communications Commission Name Thorsten Liebig Equipment Authorization Division, Application Department Approvals Processing Branch 7435 Oakland Mills Road Phone +493031102-8241 Col'umbia MD 21046 Fax +49 30 31102-8305 USA E-Mail [email protected] Your letter 01 Our relerence Date 13 March 2015 Subject: Request tor Contidentiality FCC 10: QIPAL6A-E To Whom It May Concern: In accordance with FCC rules 47 CFR 0.457(d), Gemalto M2M GmbH requests confidentiality for the following items: 1. Block Diagram 2. Schematic Diagram 3. Part List I Tune Up procedure 4. Operational description These items contain detailed system and equipment description and related information about the product which Gemalto M2M GmbH considers to be proprietary, confidential and a custom design which otherwise would' only released to qualified tech and is not released to the general public. Since this design is a basis from which future technological product will evolve, Gemalto M2M GmbH also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. Sincerely, ß(, "J (lcoc Dr. J . rg Rook Manager Approvals Head of System Test Thorst~ www.gemalto.comlm2m Registered Office: Managing Directors: Commercial register, Reg. No.: Gemalte M2M GmbH Nerbert Muhrer. Sebastien Galleis Amtsgeric ht Münc hen, HRB 172715 St.-Martin-Str. 60 WEEE-Reg.·Nr DE 58893809 81541 Munich Germany

gemaltd Gemalta M2M GmbH· Siemensdamm SO • 13629 Berlin • Germany Federal Communications Commission Equipment Authorization Division, Application Processing Branch Mills Road 7435 Oakland Columbia MD 21046 USA Name Department Phone Fax E-Mail Thorsten Liebig System Test - Approvals +49 30 31102-8241 +493031102-8305 [email protected] Your letter of Our reference Berlin, 16 March 2015 Modular Approval Statement Date: 13 March 2015 FCC Certification Number: QIPALS6A-E Module: Cinterion ALS6A-E Dear Madam or Sir Pursuant to Paragraphs CFR § 15212 , we herewith declare for our module Modular approval requirement Yes No* (a) The radio elements must have the radio frequency circuitry be shielded. Physicalldiscrete and tuning capacitors may be located external to the shield, but must be on the module assembly. x *Please provide a detailed explanation if the answer is "No.": (b) The module shall have buffered modulation/data input(s) (if such inputs are provided) to ensure that the module will comply with the requirements set out in the applicable RSS standard under conditions of excessive data rates or over-modulation. x *Please provide a detailed explanation if the answer is "No.": (c) The module shall have its own power supply regulation on the module. This is to ensure that the module will comply with the requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module. x *Please provide a detailed explanation if the answer is "No.": www.gemalto.com/m2m Registered Office: Managing Directors: Commercial register, Reg. No.: Gemalto M2M GmbH Norbert Muhrer, Silbastien Gallois Amtsgeric ht München, HRB 17271 5 St.·Martin·Str. 60 WEEE·Reg.·Nr OE 58893809 81541 Munich Germany Modular approval requirement Yes No· (d) The module sha'll comply with the provisions for external power amplifiers and antennas detailed in this standard. The equipment certification submission shall contain a detailed description of the configuration of all antennas that will be used with the module. x ·Please provide a detailed explanation if the answer is "No.": - - (e) The module shall be tested for compliance with the applicable standard in a stand-alone configuration, i.e. the module must not be inside another device during testing. ·Please provide a detailed explanation if the answer is "No.": x . (f) The module shall comply with the Category I equipment labelling requirements and CFR § 15.212(a)p)(vi). ·Please provide a detailed explanation if the answer is "No.": x (g) The module shall comply with applicable RSS-102 exposure requirements and any applicable FCC RF exposure requirement which are based on the intended use/configurations. ·Please provide a detailed explanation if the answer is "No.": I x Only applicable for IC certification: (h) Is the modular device for an Iindustry Canada licensed exempt service? ·Please provide a detailed explanation if the answer is "No.": Licensed modular device for GSMIWCDMA and L TE Only applicable for FCC certification: x (i) The modular transmitter complies with all applicable FCC rules. Instructions for maintaining compliance are given in the user instructions. ·Please provide a detailed explanation if the answer is "No.": x If you have any questions, please feel free to contact us at the address shown below. With best regards Gemc~:?_ ~~:~ke.) Thorsten Liebig ~ Manager APproval( Head of System Test www.gemalto.comJm2m

gemalto X Gemalte M2M GmbH· Siemensdamm 50 • 13629 Berlin • Germany Federal Communications Commission Name Thorsten Liebig Equipment Authorization Division, Application Department Approvals Processing Branch 7435 Oakland Mills Road Phone +49 30 31102-8241 Columbia MD 21046 Fax +49 30 31102-8305 USA E-Mail [email protected] Your letter of Our reference Date 20 March 2015 Subject: Request for Short Term Confidentiality FCC 10: QIPALS6A-E To Whom It May Concern: In accordance with §0.459(d) of CFR 47 and Public Notice DA 04-1705, Gemalto M2M GmbH requests the following items of product ALS6A-US as short term confidential be withheld fram public view for aperiod of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. 1. External Photos 2. Internal Photos 3. Test Setup Photos 4. User Manual These items contain detailed system and equipment description and related information about the product which Gemalto M2M GmbH considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological praduct will evolve, Gemalto M2M GmbH also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. n:'Lci,t , h f41( Thorsten Liebig ~ Dr. Jörg Rook Manager Approvals Head of System Test www.gemalto.comlm2m Registered Office: Managing Direetors: Cemmercial register, Reg. Ne.: Gemalte M2M GmbH Nerberl MUhrer, Sebastien Gall 'ois Amtsgericht München, HRB 172715 St. -Merlin-Sir 60 WEEE-Reg-Nr OE 58893809 81541 Munich Germany

Page 1 of 8 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM Laboratory Accreditation and Listings Reg. No.: 736496 MRA US-EU 0003 Industry Canada Reg. No.: 3462D-1 Reg. No.: 3462D-2 Reg. No.: 3462D-3 Voluntary Controls for Electromagnetic Emissions Reg. No.: R-2666 C-2914, T-1967, G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: [email protected] • Internet: www.cetecom.com Annex 2: External EUT photographs to T E S T R E P O R T No.: 20834387a/14-C1 Wireless Module ALS6A-E According to: FCC Regulations Part 27 Gemalto M2M GmbH for Annex 2 to Test Report 20834387a/14-C1, Page 2 of 8 TR-20834387a-14-Annex2 Table of contents 1. EXTERNAL EUT PHOTOGRAPHS ................................................................................................................ 3 Annex 2 to Test Report 20834387a/14-C1, Page 3 of 8 TR-20834387a-14-Annex2 1. External EUT photographs Photograph 1: EUT A front side Photograph 2: EUT A rear side Annex 2 to Test Report 20834387a/14-C1, Page 4 of 8 TR-20834387a-14-Annex2 Photograph 3: EUT A and cable connector Photograph 4: EUT A and cable connector Annex 2 to Test Report 20834387a/14-C1, Page 5 of 8 TR-20834387a-14-Annex2 Photograph 5: EUT A and cable connector to AE4 Photograph 6: EUTA and cable connector Annex 2 to Test Report 20834387a/14-C1, Page 6 of 8 TR-20834387a-14-Annex2 Photograph 7: AE 4 front side and connection point (circled yellow) to EUT A Photograph 8: AE 4 rear side Annex 2 to Test Report 20834387a/14-C1, Page 7 of 8 TR-20834387a-14-Annex2 Photograph 9: AE 1 Photograph 10: AE 5 Annex 2 to Test Report 20834387a/14-C1, Page 8 of 8 TR-20834387a-14-Annex2 Photograph 11: AE 6 Photograph 12: AE 7

Cinterion Module ALS6A‐E Label location ALS6A‐E label location ALS1‐US label information

Cinterion Module ALS6A-E Internal Photos Top Side Bottom Side

Page 1 of 20 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM Laboratory Accreditation and Listings Reg. No.: 736496 MRA US-EU 0003 Industry Canada Reg. No.: 3462D-1 Reg. No.: 3462D-2 Reg. No.: 3462D-3 Voluntary Controls for Electromagnetic Emissions Reg. No.: R-2666 C-2914, T-1967, G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: [email protected] • Internet: www.cetecom.com T E S T R E P O R T No.: 20834387b/14-C1 Wireless Module ALS6A-E FCC-ID: QIPALS6A-E According to: FCC Regulations Part 2.1091 Gemalto M2M GmbH for Test Report 20834387b/14-C1, Page 2 of 20 TR-20834387b-14-C1 Table of contents 1. SUMMARY OF TEST RESULTS ...................................................................................................................... 3 1.1. TX mode, tests overview FCC Part 2.1091 ..................................................................................................... 3 1.2. Attestation: ....................................................................................................................................................... 3 2. ADMINISTRATIVE DATA ............................................................................................................................... 4 2.1. Identification of the testing laboratory ............................................................................................................. 4 2.2. Test location .................................................................................................................................................... 4 2.3. Organizational items ........................................................................................................................................ 4 2.4. Applicant’s details ........................................................................................................................................... 4 2.5. Manufacturer’s details ..................................................................................................................................... 4 3. EQUIPMENT UNDER TEST (EUT) ................................................................................................................. 5 3.1. TECHNICAL DESCRIPTION OF MAIN EUT ............................................................................................. 5 3.2. EUT: Type, S/N etc. and short descriptions used in this test report ................................................................ 6 3.3. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions .................................................................. 6 3.4. EUT set-ups ..................................................................................................................................................... 7 3.5. EUT operating modes ...................................................................................................................................... 7 3.6. Configuration of cables used for testing .......................................................................................................... 8 4. MEASUREMENTS ............................................................................................................................................. 9 4.1. Radio Frequency Exposure Evaluation §2.1091 .............................................................................................. 9 4.2. Results for fixed and mobile operations .......................................................................................................... 11 4.3. Maximum admissible antenna gain for given cable lengths and PCB-loss ..................................................... 13 4.4. Conclusion for maximum admissible antenna gain including PCB loss ......................................................... 13 4.5. Measurement uncertainties .............................................................................................................................. 14 5. ABBREVIATIONS USED IN THIS REPORT ................................................................................................. 14 6. ACCREDITATION DETAILS OF CETECOM’S LABORATORIES AND TEST SITES ......................... 15 7. INSTRUMENTS AND ANCILLARY ................................................................................................................ 16 7.1. Used equipment “CTC” ................................................................................................................................... 16 8. VERSIONS OF TEST REPORTS (CHANGE HISTORY) ............................................................................. 20 Table of annex Total pages SEPARATE DOCUMENT: ANNEX 2 - EXTERNAL PHOTOGRAPHS OF EUT 8 SEPARATE DOCUMENT: ANNEX 4 - INTERNAL PHOTOGRAPHS OF EUT FROM APPLICANT The listed attachments are an integral part of this report. Test Report 20834387b/14-C1, Page 3 of 20 TR-20834387b-14-C1 1. Summary of test results The test results apply exclusively to the test samples as presented in this Report. The CETECOM GmbH does not assume responsibility for any conclusions and generalizations taken in conjunction with other specimens or samples of the type of the item presented to tests. 1.1. TX mode, tests overview FCC Part 2.1091 No. of Diagram group Test Cases Port References & Limits EUT set-up EUT op- mode Result FCC Standard RSS Section Test limits -- RF Power (conducted) Antenna terminal (conducted) §2.1046 -- N/A 1 1 passed Remark 1 -- RF Power (radiated) Cabinet §27.50(h)(2) -- < 2 Watt (EIRP) 2 1 passed Remark 1 -- Radio frequenc…

Text truncated - open the document above for the full version.

Page 1 of 81 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM Laboratory Accreditation and Listings Reg. No.: 736496 MRA US-EU 0003 Industry Canada Reg. No.: 3462D-1 Reg. No.: 3462D-2 Reg. No.: 3462D-3 Voluntary Controls for Electromagnetic Emissions Reg. No.: R-2666 C-2914, T-1967, G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: [email protected] • Internet: www.cetecom.com Annex 1: Measurement diagrams to T E S T R E P O R T No.: 20834387a/14-C1 Wireless Module ALS6A-E FCC-ID: QIPALS6A-E According to: FCC Regulations Part 27 Gemalto M2M GmbH for Annex 1 to Test Report 20834387a/14-C1, Page 2 of 81 TR-20834387a-14-Annex1 Table of contents 1. DIAGRAMS OF MEASUREMENTS ................................................................................................................ 3 Annex 1 to Test Report 20834387a/14-C1, Page 3 of 81 TR-20834387a-14-Annex1 1. Diagrams of measurements 1.1. Spurious emissions - magnetic field strengths (LTE Band VII) Diagram No. 2.01_Ch20825_BW-15MHz_1RB-low Date: 10.02.2015 Page 1 of 1 Test description: Magnetic Field Strength Measurement related to 30/300 m distance Test site and distance: Ref.-Nr. 441 Semi Anechoic Room (SAR) with 3 m measurement distance Version of Testsoftware: EMC32 V8.51.0 Distance correction: used accord. table, pls. see test report Technical Data: Please see page 2 for detailed data of measurement setup Rec. antenna (pre-scan): height 1.00 m, parallel and 90° to EUT polarisation Used filter: bypass Test specification: FCC 15.205 § 15.209 Operator: Kre Operating conditions: LTE Band 7, Channel 20825, 15MHz BW, 1RB low Power during tests: 12V DC Comment 1: Channel low EUT Information EUT Name: LTE Band 7 Module Manufacturer: Gemalto Serial Number: #004401081034643 Hardware Rev: tbd Software Rev: tbd Comment: -- - 100 - 90 - 80 - 70 - 60 - 50 - 40 - 30 - 20 - 10 0 10 20 30 40 50 9k203050100 k20 030 050 01M2M3M5M10M2030 M Le vel i n dB μV /m F re q u e n c y in H z F C C 1 5 .2 0 9 _ ma g n h o r+ v e rt F C C 1 5 .2 0 9 _ M a g n e tic _ F ie ld F C C 1 5 .2 0 9 _ A V _ 2 1 ,1 5 2 0 0 0 M H z -17,410 dBμV/m 2 4 ,5 1 2 0 0 0 M H z 19,259 dBμV/m 1 1 1 ,2 0 0 k H z -56,845 dBμV/m Annex 1 to Test Report 20834387a/14-C1, Page 4 of 81 TR-20834387a-14-Annex1 Diagram No. 2.02_Ch21100_BW-10MHz_50RB Date: 10.02.2015 Page 1 of 1 Test description: Magnetic Field Strength Measurement related to 30/300 m distance Test site and distance: Ref.-Nr. 441 Semi Anechoic Room (SAR) with 3 m measurement distance Version of Testsoftware: EMC32 V8.51.0 Distance correction: used accord. table, pls. see test report Technical Data: Please see page 2 for detailed data of measurement setup Rec. antenna (pre-scan): height 1.00 m, parallel and 90° to EUT polarisation Used filter: bypass Test specification: FCC 15.205 § 15.209 Operator: Kre Operating conditions: LTE Band 7, Channel 21100, 10MHz BW, 50RB Power during tests: 12V DC Comment 1: Channel middle EUT Information EUT Name: LTE Band 7 Module Manufacturer: Gemalto Serial Number: #004401081034643 Hardware Rev: tbd Software Rev: tbd Comment: -- - 100 - 90 - 80 - 70 - 60 - 50 - 40 - 30 - 20 - 10 0 10 20 30 40 50 9k203050100 k20 030 050 01M2M3M5M10M2030 M Le vel i n dB μV /m F re q u e n c y in H z F C C 1 5 .2 0 9 _ ma g n h o r+ v e rt F C C 1 5 .2 0 9 _ M a g n e tic _ F ie ld F C C 1 5 .2 0 9 _ A V _ 2 1 7 ,0 1 6 0 0 0 M H z 18,827 dBμV/m 1 ,3 1 2 0 0 0 M H z -18,767 dBμV/m 9 4 ,8 0 0 k H z -57,128 dBμV/m Annex 1 to Test Report 20834387a/14-C1, Page 5 of 81 TR-20834387a-14-Annex1 Diagram No. 2.03_Ch21350_BW-20MHz_100RB Date: 10.02.2015 Page 1 of 1 Test description: Magnetic Field Strength Measurement related to 30/300 m distance Test site and distance: Ref.-Nr. 441 Semi Anechoic Room (SAR) with 3 m measurement distance Version of Testsoftware: EMC32 V8.51.0 Distance correction: used accord. table, pls. see test report Technical Data: Please see page 2 for detailed data of measurement setup Rec. antenna (pre-scan): height 1.00 m, parallel and 90° to EUT polarisation Used filter: bypass Test specification: FCC 15.205 § 15.209 Operator: Kre Operating conditions: LTE Band 7, Channel 21350, 20MHz BW, 100 RB Power during tests: 12V DC Comment 1: Channel high EUT Information EUT Name: LTE Band 7 Module Manufacturer: Gemalto Serial Number: #004401081034643 Hardware Rev: tbd Software Rev: tbd Comment: -- - 100 - 90 - 80 - 70 - 60 - 50 - 40 - 30 - 20 - 10 0 10 20 30 40 50 9k203050100 k20 030 050 01M2M3M5M10M2030 M Le vel i n dB μV /m F re q u e n c y in H z F C C 1 5 .2 0 9 _ ma g n h o r+ v e rt F C C 1 5 .2 0 9 _ M a g n e tic _ F ie ld F C C 1 5 .2 0 9 _ A V _ 2 2 0 ,2 2 4 0 0 0 M H z 18,475 dBμV/m1 ,1 2 8 0 0 0 M H z -19,019 dBμV/m 1 1 6 ,2 0 0 k H z -56,682 dBμV/m Annex 1 to Test Report 20834387a/14-C1, Page 6 of 81 TR-20834387a-14-Annex1 1.2. Spurious emissions radiated 8.01a_Ch20825_15MHz_RB1_QPSK Common Information Test Description: Radiated Spurious Emissions LTE Band 7 Test Site Location: CETECOM GmbH Essen Test Site: Fully Anechoic Room (FAR) Test Standard: FCC Part 27.53(l)(4) Mobile stations limits Operating Mode: UE allocated channel 20825/ BW15MHz: / RB:1 / Position:low Environmental Conditions: Humidity: 35%rH; Temperature: 20°C Test SW Version: EMC32 V9.15.0 Operator: KTa Remarks: EUT - laying+standing position EUT Information EUT Name: LTE Band 7 Module Manufacturer: Gemalto Serial Number: #004401081034643 Hardware Rev: tbd Software Rev: tbd Comment: -- -6 0 -4 0 -2 0 0 20 30 30 500 1000 1500 2000 2500 2800 Level in dBm F re q u e n c y in M H z F u ll S p e c tru m 2 ,5 0 0 5 0 1 0 0 2 G H…

Text truncated - open the document above for the full version.

Page 1 of 43 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM Laboratory Accreditation and Listings Reg. No.: 736496 MRA US-EU 0003 Industry Canada Reg. No.: 3462D-1 Reg. No.: 3462D-2 Reg. No.: 3462D-3 Voluntary Controls for Electromagnetic Emissions Reg. No.: R-2666 C-2914, T-1967, G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: [email protected] • Internet: www.cetecom.com T E S T R E P O R T No.: 20834387a/14-C1 Wireless Module ALS6A-E FCC-ID: QIPALS6A-E According to: FCC Regulations Part 27 Gemalto M2M GmbH for Test Report 20834387a/14-C1, Page 2 of 43 TR-20834387a-14-C1 Table of contents 1. SUMMARY OF TEST RESULTS...................................................................................................................... 3 1.1. TEST OVERVIEW ACCORDING FCC PART 27 ........................................................................................ 3 2. ADMINISTRATIVE DATA ............................................................................................................................... 5 2.1. Identification of the testing laboratory ............................................................................................................. 5 2.2. Test location .................................................................................................................................................... 5 2.3. Organizational items ........................................................................................................................................ 5 2.4. Applicant’s details ........................................................................................................................................... 5 2.5. Manufacturer’s details ..................................................................................................................................... 5 3. EQUIPMENT UNDER TEST (EUT) ................................................................................................................. 6 3.1. Technical data of main EUT declared by applicant ......................................................................................... 6 3.2. EUT: Type, S/N etc. and short descriptions used in this test report ................................................................ 7 3.3. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions .................................................................. 7 3.4. EUT set-ups ...............................................................................................................................…

Text truncated - open the document above for the full version.