QIPBG2Quadband GSM/GPRS Module

BG2-W External picture

Page 1 of 7 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM Laboratory Accreditation and Listings DAT-P176/94-02 Reg. No.: 99538 MRA US-EU 0003 Industry Canada Reg. No.: 3462D-1 3462D-2 Reg. No.: R-2665, R-2666 C-2914, T-339 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: [email protected] • Internet: www.cetecom.com Annex 2: EUT Photos to TEST REPORT No.: 2-20785798c/10 for Quad-Band GSM/GPRS Module BG2-W FCC-ID: QIPBG2 IC: 7830A-BG2 According to: FCC Regulations FCC Part 22/24 FCC Part 15.209C & IC Regulations RSS-132, Issue 2 RSS-133, Issue 5 RSS-Gen, Issue 2 Cinterion Wireless Modules GmbH Annex 2 to Test Report 2-20785798c/10, Page 2 of 7 2_20785798c_10_A2.doc Table of contents 1. EUT PHOTOS ...................................................................................................................................................... 3 Annex 2 to Test Report 2-20785798c/10, Page 3 of 7 2_20785798c_10_A2.doc 1. EUT Photos Photograph: EUT – top side PCB Photograph: EUT – bottom side PCB Annex 2 to Test Report 2-20785798c/10, Page 4 of 7 2_20785798c_10_A2.doc Photograph: Modules connection (control and power lines) to DSB75 Box Photograph: antenna connector (signal line) and rf-adapter to external antenna Annex 2 to Test Report 2-20785798c/10, Page 5 of 7 2_20785798c_10_A2.doc Photograph: Magnetic mount antenna (EUT C) Photograph: Handset (EUT D) Annex 2 to Test Report 2-20785798c/10, Page 6 of 7 2_20785798c_10_A2.doc Photograph: DSB75 Box (front side of EUT F) Photograph: DSB75 Box (rear side of EUT F) Annex 2 to Test Report 2-20785798c/10, Page 7 of 7 2_20785798c_10_A2.doc Photograph: adapter Board (EUT E) – bottom side Photograph: adapter Board –(EUT E) – top side

Labelgröße 27 x 16 mm

BG2-W Internal picture

2010-08-18 Page 1 of 17 TEST REPORT Test Report No.: 4-3443-01-01/10-A Testing Laboratory Applicant CETECOM ICT Services GmbH Untertürkheimer Straße 6 – 10 66117 Saarbrücken/Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom.com e-mail: [email protected] Accredited Test Laboratory: The test laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 DAR registration number: DGA-PL-176/94-D1 Cinterion Wireless Modules GmbH Siemensdamm 50 13629 Berlin/GERMANY Phone: +49 30 311028 0 Fax: +49 30 31102-8305 Contact: Stefan Ludwig e-mail: [email protected] Phone: +49 30 31102-8152 Manufacturer Cinterion Wireless Modules GmbH Siemensdamm 50 13629 Berlin/GERMANY Test Standard/s ICNIRP Guidelines Guidelines for limiting exposure to time-varying electric, magnetic and electromagnetic fields (up to 300 GHz) FCC OET Bulletin 65 Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields AS/NZS 2772.1 Radiofrequency fields, Part 1: Maximum exposure limits - 3 kHz to 300 GHz For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: GSM/GPRS Module Device type: mobile device Model name: BG2-W FCC-ID: QIPBG2 S/N serial number: n.a. IMEI-Number: 004401-08-040340-1 HW hardware status: B2.1 SW software status: 00.656 Frequency: see technical details Antenna: external antenna Exposure category: general population / uncontrolled environment This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test performed: Test Report authorised: 2010-08-18 Thomas Vogler 2010-08-18 Bernd Rebmann Test report no.: 4-3443-01-01/10-A 2010-08-18 Page 2 of 17 1 Table of contents 1 Table of contents.......................................................................................................................................2 2 General information ..................................................................................................................................3 2.1 Notes................................................................................................................................................3 2.2 Application details .........................................................................................................................3 2.3 Statement of compliance ...............................................................................................................3 2.4 Technical details.............................................................................................................................4 3 Test standard/s:.........................................................................................................................................5 3.1 Purpose of this report ....................................................................................................................5 4 Evaluating compliance with requirements for human exposure to EMFs ..........................................6 4.1 Maximum permissible exposure (MPE) .......................................................................................6 4.2 Limits and normative references ..................................................................................................6 4.2.1 FCC requirements .................................................................................................................6 4.2.2 EN requirements....................................................................................................................6 4.2.3 Australian requirements.........................................................................................................6 4.3 Host platform analysis ...................................................................................................................7 4.3.1 Scenario 0 : WWAN stand-alone...........................................................................................9 4.3.2 Scenario 1 : WWAN + BT ......................................................................................................9 4.3.3 Scenario 2 : WWAN + WLAN ..............................................................................................10 4.3.4 Scenario 3 : WWAN + WLAN + BT .....................................................................................10 4.3.5 Scenario 4 : WWAN + WiMAX ............................................................................................11 4.3.6 Scenario 5 : WWAN + WiMAX + BT....................................................................................11 4.3.7 Scenario 6 : WWAN + WiMAX + WLAN ..............................................................................12 4.3.8 Scenario 7 : WWAN + WiMAX + WLAN + BT .....................................................................12 Annex A: RF Exposure assessment ........................................................................................................13 Annex A.1: Individual transmitters ........................................................................................................13 Annex A.2: Collocated transmitters ......................................................................................................15 Annex B: Document History .....................................................................................................................17 Annex C: Further Information ..................................................................................................................17 Test report no.: 4-3443-01-01/10-A 2010-08-18 Page 3 of 17 2 General information 2.1 Notes The test results of this test report relate exclusively to the test item specified in this test report. CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalisations …

Text truncated - open the document above for the full version.

Page 1 of 39 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM Laboratory Accreditation and Listings DAT-P176/94-02 Reg. No.: 99538 MRA US-EU 0003 Industry Canada Reg. No.: 3462D-1 3462D-2 Reg. No.: R-2665, R-2666 C-2914, T-339 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: [email protected] • Internet: www.cetecom.com T E S T R E P O R T No.: 2-20785798c/10 for Quad-Band GSM/GPRS Module BG2-W FCC-ID: QIPBG2 IC: 7830A-BG2 According to: FCC Regulations FCC Part 22/24 FCC Part 15.209C & IC Regulations RSS-132, Issue 2 RSS-133, Issue 5 RSS-Gen, Issue 2 Cinterion Wireless Modules GmbH Test Report 2-20785798c/10, Page 2 of 39 2_20785798c_10.doc Table of contents 1. SUMMARY OF TEST RESULTS ...................................................................................................................... 3 1.1. TESTS OVERVIEW FCC Part 15/22/24 and Kanada IC Standards (RSS) .................................................... 3 2. ADMINISTRATIVE DATA ............................................................................................................................... 5 2.1. Identification of the testing laboratory ............................................................................................................. 5 2.2. Test location .................................................................................................................................................... 5 2.3. Organizational items ........................................................................................................................................ 5 2.4. Applicant‟s details ........................................................................................................................................... 5 2.5. Manufacturer‟s details ..................................................................................................................................... 5 3. EQUIPMENT UNDER TEST (EUT) ................................................................................................................. 6 3.1. Additional declaration and description of main EUT ...................................................................................... 6 3.2. Configuration of cables used for testing .......................................................................................................... 6 3.3. EUT: Type, S/N etc. and short descriptions used in this test report ................................................................ 7 3.4. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions .................................................................. 7 3.5. EUT set-ups ..................................................................................................................................................... 8 3.6. EUT operating modes ...................................................................................................................................... 8 3.7. Parameter Settings on mobile phone and base station CMU200 ..................................................................... 9 4. DESCRIPTION OF TEST SET-UP’S ................................................................................................................ 10 4.1. Test Set-up for conducted measurements ........................................................................................................ 10 4.2. Test set-up for radiated measurements ............................................................................................................ 11 5. MEASUREMENTS ............................................................................................................................................. 12 5.1. RF power output (Conducted and Radiated).................................................................................................... 12 5.2. Occupied bandwidth ........................................................................................................................................ 16 5.3. Radiated emissions, below 30 MHz, §15.205 and §15.209C, RSS210, RSS310, RSS-gen ............................ 18 5.4. Emission limits (Spurious emission conducted/radiated) f> 30 MHz .............................................................. 20 5.5. Frequency stability on temperature and voltage variations ............................................................................. 28 6. CALIBRATION METHOD OF ANECHOIC CHAMBER ............................................................................. 33 7. MEASUREMENT UNCERTAINTIES .............................................................................................................. 34 8. USED EQUIPMENT “CTC” .............................................................................................................................. 35 9. CORRECTION FACTORS DUE TO REDUCED MEAS. DISTANCE (F< 30 MHZ) ................................. 39 Table of annex Total pages SEPARATE DOCUMENT 2_20785798C_10_A1.PDF: DIAGRAMS OF TESTING 90 SEPARATE DOCUMENT 2_20785798C_10_A2.PDF: PHOTOS OF EUT 7 SEPARATE DOCUMENT 2_20785798C_10_A3.PDF: PHOTOS OF SET-UP 4 Test Report 2-20785798c/10, Page 3 of 39 2_20785798c_10.doc 1. Summary of test results The presented GSM 850/900/1800/1900 Module can be build inside host applications and extends their capability by wireless GSM technology. Data transmissions or voice applications are possible field applications. In order to verify the compliance with applicable rules, a representative configuration consisting of representative auxiliary…

Text truncated - open the document above for the full version.

Page 1 of 90 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM Laboratory Accreditation and Listings DAT-P176/94-02 Reg. No.: 99538 MRA US-EU 0003 Industry Canada Reg. No.: 3462D-1 3462D-2 Reg. No.: R-2665, R-2666 C-2914, T-339 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: [email protected] • Internet: www.cetecom.com Annex 1: Diagrams to TEST REPORT No.: 2-20785798c/10 for Quad-Band GSM/GPRS Module BG2-W FCC-ID: QIPBG2 IC: 7830A-BG2 According to: FCC Regulations FCC Part 22/24 FCC Part 15.209C & IC Regulations RSS-132, Issue 2 RSS-133, Issue 5 RSS-Gen, Issue 2 Cinterion Wireless Modules GmbH Annex 1 to Test Report 2-20785798c/10, Page 2 of 90 2_20785798c_10_A1.doc Table of contents 1. DIAGRAMS ......................................................................................................................................................... 3 1.1. 26dBc Emission bandwidth ............................................................................................................................. 3 1.2. 99% Occupied bandwidth ................................................................................................................................ 7 1.3. Spurious emissions conducted – GSM850 Mode (TX-mode) ......................................................................... 10 1.4. Spurious emissions conducted – IDLE 850 Mode (RX) accord. FCC15.111 requirement.............................. 20 1.5. Spurious emissions conducted – IDLE 850 Mode (RX) accord. Canada requirement .................................... 23 1.6. Spurious emissions conducted – GSM1900 Mode (TX-mode) ....................................................................... 24 1.7. Spurious emissions conducted – IDLE 1900 Mode (RX) accord. Canada requirement .................................. 34 1.8. Spurious emissions radiated – GSM850 Mode ................................................................................................ 35 1.9. Spurious emissions radiated – GSM1900 Mode .............................................................................................. 57 1.10. Radiated emissions in the frequency range above 18GHz – GSM1900 Mode .............................................. 85 1.11. Radiated magnetic field strength measurements (f<30MHz) ........................................................................ 88 Annex 1 to Test Report 2-20785798c/10, Page 3 of 90 2_20785798c_10_A1.doc 1. Diagrams 1.1. 26dBc Emission bandwidth GSM 850 Ref 37.1 dBmAtt 40 dB* Offset 17.1 dB A LVL PS 100 kHz/Center824.2 MHzSpan1 MHz * * 3DB RBW 3 kHz VBW 30 kHz SWT 115 ms AC 1 PK MAXH -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] 26.26 dBm 824.217628205 MHz ndB [T1] 26.00 dB BW 314.102564103 kHz T1 Temp 1 [T1 ndB] 0.37 dBm 824.042948718 MHz T2 Temp 2 [T1 ndB] -0.13 dBm 824.357051282 MHz Date: 19.MAY.2010 17:18:23 Channel 128 Annex 1 to Test Report 2-20785798c/10, Page 4 of 90 2_20785798c_10_A1.doc Ref 37.1 dBm 837.0657051 MHz Att 40 dB 837.0657051 MHz 837.0657051 MHz 837.0657051 MHz 837.0657051 MHz 837.0657051 MHz 837.0657051 MHz 837.0657051 MHz 837.0657051 MHz 837.0657051 MHz 837.0657051 MHz * 837.0657051 MHz Offset 17.1 dB 837.0657051 MHz A 837.0657051 MHz LVL 837.0657051 MHz PS 837.0657051 MHz Center837 MHz 837.0657051 MHz Span1 MHz 837.0657051 MHz 100 kHz/ 837.0657051 MHz * 837.0657051 MHz * 837.0657051 MHz RBW 3 kHz 837.0657051 MHz VBW 30 kHz 837.0657051 MHz SWT 115 ms 837.0657051 MHz AC 837.0657051 MHz 837.0657051 MHz 3DB 837.0657051 MHz 1 PK 837.0657051 MHz VIEW 837.0657051 MHz -60 -50 -40 -30 -20 -10 0 10 20 30 837.0657051 MHz 1 Marker 1 [T1 ] 25.32 dBm 837.065705128 MHz ndB [T1] 26.00 dB BW 315.705128205 kHz T1 Temp 1 [T1 ndB] -1.30 dBm 836.841346154 MHz T2 Temp 2 [T1 ndB] -1.23 dBm 837.157051282 MHz MARKER 1 837.0657051 MHz Date: 19.MAY.2010 16:41:18 Channel 192 Ref 37.1 dBmAtt 40 dB* Offset 17.1 dB A LVL PS 100 kHz/Center848.8 MHzSpan1 MHz * * 3DB RBW 3 kHz VBW 30 kHz SWT 115 ms AC 1 PK MAXH -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] 27.36 dBm 848.868910256 MHz ndB [T1] 26.00 dB BW 314.102564103 kHz T1 Temp 1 [T1 ndB] 1.00 dBm 848.642948718 MHz T2 Temp 2 [T1 ndB] 1.37 dBm 848.957051282 MHz Date: 19.MAY.2010 17:26:37 Channel 251 Annex 1 to Test Report 2-20785798c/10, Page 5 of 90 2_20785798c_10_A1.doc GSM 1900 Ref 37.1 dBmAtt 40 dB* * * Offset 17.1 dB A LVL PS 3DB RBW 3 kHz VBW 30 kHz SWT 115 ms AC Center848.8 MHzSpan1 MHz100 kHz/ 1 PK VIEW -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] 25.88 dBm 848.787179487 MHz ndB [T1] 26.00 dB BW 310.897435897 kHz T1 Temp 1 [T1 ndB] -0.37 dBm 848.646153846 MHz T2 Temp 2 [T1 ndB] -0.78 dBm 848.957051282 MHz Date: 10.MAY.2010 13:10:45 Channel 512 3DB AC 100 kHz/ Ref 37.1 dBmAtt 40 dBSWT 115 ms* A PS Offset 17.1 dB LVL Center1.88 GHzSpan1 MHz * * RBW 3 kHz VBW 30 kHz 1 PK MAXH -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] 23.76 dBm 1.880067308 GHz ndB [T1] 26.00 dB BW 310.897435897 kHz T1 Temp 1 [T1 ndB] -2.50 dBm 1.879844551 GHz T2 Temp 2 [T1 ndB] -2.35 dBm 1.880155449 GHz Date: 10.MAY.2010 13:23:13 Channel 661 Annex 1 to Test Report 2-20785798c/10, Page 6 of 90 2_20785798c_10_A1.doc Ref 37.1 dBmAtt 40 dB* A PS Offset 17.1 dB LVL 100 kHz/Center1.909783654 GHzSpan1 MHz AC 3DB SWT 640 ms * *TG-20 dBm RBW 3 kHz VBW 30 kHz *1 PK VIEW -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] 21.68 dBm 1.909782051 GHz ndB [T1] 26.00 dB BW 314.102564103 kHz T1 Temp 1 [T1 ndB] -4.90 dBm 1.909644231 GHz T2 Temp 2 [T1 ndB] -4.09 dBm 1.909958333 GHz Date: 10.MAY.2010 13:29:43 Channel 810 Annex 1 to Test Report 2-20785798c/10, Page 7 of …

Text truncated - open the document above for the full version.

Page 1 of 4 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM Laboratory Accreditation and Listings DAT-P176/94-02 Reg. No.: 99538 MRA US-EU 0003 Industry Canada Reg. No.: 3462D-1 3462D-2 Reg. No.: R-2665, R-2666 C-2914, T-339 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: [email protected] • Internet: www.cetecom.com Annex 3: Set-up Photos to TEST REPORT No.: 2-20785798c/10 for Quad-Band GSM/GPRS Module BG2-W FCC-ID: QIPBG2 IC: 7830A-BG2 According to: FCC Regulations FCC Part 22/24 FCC Part 15.209C & IC Regulations RSS-132, Issue 2 RSS-133, Issue 5 RSS-Gen, Issue 2 Cinterion Wireless Modules GmbH Annex 3 to Test Report 2-20785798c/10, Page 2 of 4 2_20785798c_10_A3.doc Table of contents 1. SET-UP PHOTOS ................................................................................................................................................ 3 Annex 3 to Test Report 2-20785798c/10, Page 3 of 4 2_20785798c_10_A3.doc 1. Set-up photos Photographs: Conducted measurement set-up, climatic tests Photographs: Radiated measurement set-up Annex 3 to Test Report 2-20785798c/10, Page 4 of 4 2_20785798c_10_A3.doc Photographs: Radiated measurements set-up