QIPBGS2GSM 850/900/1800/1900 GPRS Module

 BGS2-E/BGS2-W Version:01.300 DocId:BGS2_HIO_v01.300 Hardware Interface Overview GENERAL NOTE THE USE OF THE PRODUCT INCLUDING THE SOFTWARE AND DOCUMENTATION (THE "PROD- UCT") IS SUBJECT TO THE RELEASE NOTE PROVIDED TOGETHER WITH PRODUCT. IN ANY EVENT THE PROVISIONS OF THE RELEASE NOTE SHALL PREVAIL. THIS DOCUMENT CONTAINS INFORMATION ON CINTERION PRODUCTS. THE SPECIFICATIONS IN THIS DOCUMENT ARE SUB- JECT TO CHANGE AT CINTERION'S DISCRETION. CINTERION WIRELESS MODULES GMBH GRANTS A NON-EXCLUSIVE RIGHT TO USE THE PRODUCT. THE RECIPIENT SHALL NOT TRANS- FER, COPY, MODIFY, TRANSLATE, REVERSE ENGINEER, CREATE DERIVATIVE WORKS; DISAS- SEMBLE OR DECOMPILE THE PRODUCT OR OTHERWISE USE THE PRODUCT EXCEPT AS SPECIFICALLY AUTHORIZED. THE PRODUCT AND THIS DOCUMENT ARE PROVIDED ON AN "AS IS" BASIS ONLY AND MAY CONTAIN DEFICIENCIES OR INADEQUACIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, CINTERION WIRELESS MODULES GMBH DISCLAIMS ALL WARRANTIES AND LIABILITIES. THE RECIPIENT UNDERTAKES FOR AN UNLIMITED PERIOD OF TIME TO OBSERVE SECRECY REGARDING ANY INFORMATION AND DATA PROVIDED TO HIM IN THE CONTEXT OF THE DELIVERY OF THE PRODUCT. THIS GENERAL NOTE SHALL BE GOV- ERNED AND CONSTRUED ACCORDING TO GERMAN LAW. Copyright Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its con- tents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. Copyright © 2011, Cinterion Wireless Modules GmbH Trademark Notice Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other registered trademarks or trademarks mentioned in this doc- ument are property of their respective owners. BGS2_HIO_v01.300Page 2 of 292011-03-08 Confidential / Released BGS2-E/BGS2-W Hardware Interface Overview 2  Document Name: BGS2-E/BGS2-W Hardware Interface Overview Version: 01.300 Date: 2011-03-08 DocId: BGS2_HIO_v01.300 Status Confidential / Released BGS2-E/BGS2-W Hardware Interface Overview Contents 29 BGS2_HIO_v01.300Page 3 of 292011-03-08 Confidential / Released  Contents 1Introduction ................................................................................................................. 6 1.1Related Documents ........................................................................................... 6 1.2Terms and Abbreviations ................................................................................... 6 1.3Regulatory and Type Approval Information ..................................................... 10 1.3.1Directives and Standards .................................................................... 10 1.3.2SAR requirements specific to portable mobiles .................................. 13 1.3.3Safety Precautions .............................................................................. 14 2Product Concept ....................................................................................................... 15 2.1Key Features at a Glance ................................................................................ 15 3Application Interface................................................................................................. 17 3.1Operating Modes ............................................................................................. 18 4Antenna Interface...................................................................................................... 19 5Electrical, Reliability and Radio Characteristics.................................................... 20 5.1Absolute Maximum Ratings ............................................................................. 20 5.2Operating Temperatures .................................................................................. 21 5.3Storage Conditions .......................................................................................... 22 5.4Reliability Characteristics ................................................................................. 23 5.5Pad Assignment .............................................................................................. 24 5.6Power Supply Ratings...................................................................................... 26 6Mechanics, Mounting and Packaging ..................................................................... 27 6.1Mechanical Dimensions of BGS2-E/BGS2-W.................................................. 27 7Reference Approval .................................................................................................. 28 7.1Reference Equipment for Type Approval ......................................................... 28 7.2Compliance with FCC and IC Rules and Regulations ..................................... 29 BGS2-E/BGS2-W Hardware Interface Overview Ta b l e s 110 BGS2_HIO_v01.300Page 4 of 1102011-03-08 Confidential / Released  Tables Table 1:Directives ....................................................................................................... 10 Table 2:Standards of North American type approval .................................................. 10 Table 3:Standards of European type approval............................................................ 10 Table 4:Requirements of quality ................................................................................. 11 Table 5:Standards of the Ministry of Information Industry of the People’s Republic of China ............................................................................ 11 Table 6:Toxic or hazardous substances or elements with defined concentration limits 12 Table 7:Overview of operating modes ........................................................................ 18 Table 8:Return loss in the active band.....................................................…

Text truncated - open the document above for the full version.

BGS2-W – External Pictures

Basic Label 23 x 14,5 mm

BGS2-W – Internal Pictures

2011-03-03 Page 1 of 17 TEST REPORT Test Report No.: 1-3183-01-02/11 Testing Laboratory Applicant CETECOM ICT Services GmbH Untertürkheimer Straße 6 – 10 66117 Saarbrücken/Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom.com e-mail: [email protected] Accredited Test Laboratory: The test laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 DAR registration number: DGA-PL-176/94-D1 Cinterion Wireless Modules GmbH Siemensdamm 50 13629 Berlin/GERMANY Phone: +49 30 311028 0 Fax: +49 30 31102-8305 Contact: Stefan Ludwig e-mail: [email protected] Phone: +49 30 31102-8152 Manufacturer Cinterion Wireless Modules GmbH Siemensdamm 50 13629 Berlin/GERMANY Test Standard/s ICNIRP Guidelines Guidelines for limiting exposure to time-varying electric, magnetic and electromagnetic fields (up to 300 GHz) FCC OET Bulletin 65 Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields AS/NZS 2772.1 Radiofrequency fields, Part 1: Maximum exposure limits - 3 kHz to 300 GHz For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: GSM/GPRS Module Device type: mobile device Model name: BGS2-W S/N serial number: n.a. FCC-ID: QIPBGS2-W IMEI-Number: n.a. HW hardware status: n.a. SW software status: n.a. Frequency: see technical details Antenna: external antenna Exposure category: general population / uncontrolled environment This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test Report authorised: Test performed: 2011-03-03 Bernd Rebmann 2011-03-03 Thomas Vogler Test report no.: 1-3183-01-02/11 2011-03-03 Page 2 of 17 1 Table of contents 1 Table of contents.......................................................................................................................................2 2 General information ..................................................................................................................................3 2.1 Notes................................................................................................................................................3 2.2 Application details .........................................................................................................................3 2.3 Statement of compliance ...............................................................................................................3 2.4 Technical details.............................................................................................................................4 3 Test standard/s:.........................................................................................................................................5 3.1 Purpose of this report ....................................................................................................................5 4 Evaluating compliance with requirements for human exposure to EMFs ..........................................6 4.1 Maximum permissible exposure (MPE) .......................................................................................6 4.2 Limits and normative references ..................................................................................................6 4.2.1 FCC and IC requirements......................................................................................................6 4.2.2 EN requirements....................................................................................................................6 4.2.3 Australian requirements.........................................................................................................6 4.3 Host platform analysis ...................................................................................................................7 4.3.1 Scenario 1 : WWAN + BT ....................................................................................................10 4.3.2 Scenario 2 : WWAN + WLAN ..............................................................................................10 4.3.3 Scenario 3 : WWAN + WLAN + BT .....................................................................................11 4.3.4 Scenario 4 : WWAN + WiMAX ............................................................................................11 4.3.5 Scenario 5 : WWAN + WiMAX + BT....................................................................................12 4.3.6 Scenario 6 : WWAN + WiMAX + WLAN ..............................................................................12 4.3.7 Scenario 7 : WWAN + WiMAX + WLAN + BT .....................................................................13 Annex A: RF Exposure assessment ........................................................................................................14 Annex A.1: Individual transmitters ........................................................................................................14 Annex A.2: Collocated transmitters ......................................................................................................16 Test report no.: 1-3183-01-02/11 2011-03-03 Page 3 of 17 2 General information 2.1 Notes The test results of this test report relate exclusively to the test item specified in this test report. CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalisations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of CETECOM ICT Services GmbH. This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the…

Text truncated - open the document above for the full version.

Page 1 of 40 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM Laboratory Accreditation and Listings D-PL-12047-01-01 MRA US-EU 0003 Industry Canada Reg. No.: 3462D-1 3462D-2 Reg. No.: R-2665, R-2666 C-2914, T-1967 G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: [email protected] • Internet: www.cetecom.com TEST REPORT No.: 2-20795542b/11 for Quad-Band GSM/GPRS Module BGS2-W FCC-ID: QIPBGS2 IC: 7830A-BGS2 According to: FCC Regulations FCC Part 22H/24E FCC Part 15.207C FCC Part 15.209C & IC Regulations RSS-132, Issue 2 RSS-133, Issue 5 RSS-Gen, Issue 2 Cinterion Wireless Modules GmbH Test Report 2-20795542b/11, Page 2 of 40 2_20795542b_11.docx Table of contents 1. SUMMARY OF TEST RESULTS...................................................................................................................... 3 1.1. TESTS OVERVIEW FCC Part 15/22/24 and Kanada IC Standards (RSS) .................................................... 3 2. ADMINISTRATIVE DATA ............................................................................................................................... 5 2.1. Identification of the testing laboratory ............................................................................................................. 5 2.2. Test location .................................................................................................................................................... 5 2.3. Organizational items ........................................................................................................................................ 5 2.4. Applicant‟s details ........................................................................................................................................... 5 2.5. Manufacturer‟s details ..................................................................................................................................... 5 3. EQUIPMENT UNDER TEST (EUT) ................................................................................................................. 6 3.1. Additional declaration and description of main EUT ...................................................................................... 6 3.2. Configuration of cables used for testing .......................................................................................................... 6 3.3. EUT: Type, S/N etc. and short descriptions used in this test report ................................................................ 7 3.4. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions .................................................................. 7 3.5. EUT set-ups ..................................................................................................................................................... 8 3.6. EUT operating modes ...................................................................................................................................... 8 3.7. Parameter Settings on mobile phone and base station CMU200 ..................................................................... 9 4. DESCRIPTION OF TEST SET-UP’S ................................................................................................................ 10 4.1. Test Set-up for conducted measurements ........................................................................................................ 10 4.2. Test set-up for radiated measurements ............................................................................................................ 12 5. MEASUREMENTS ............................................................................................................................................. 13 5.1. RF power output (Conducted and Radiated) ................................................................................................... 13 5.2. Occupied bandwidth ........................................................................................................................................ 17 5.3. Radiated emissions, below 30 MHz, §15.205 and §15.209C, RSS210, RSS310, RSS-gen ............................ 19 5.4. Emission limits (Spurious emission conducted/radiated) ................................................................................ 21 5.5. Frequency stability on temperature and voltage variations ............................................................................. 27 5.6. Conducted emissions on AC-Power lines ........................................................................................................ 32 6. CALIBRATION METHOD OF ANECHOIC CHAMBER ............................................................................. 34 7. MEASUREMENT UNCERTAINTIES .............................................................................................................. 35 8. INSTRUMENTS AND ANCILLARY ................................................................................................................ 36 8.1. Used equipment “CTC” ................................................................................................................................... 36 9. ANNEX – CORRECTION FACTORS DUE TO REDUCED MEAS. DISTANCE (F< 30 MHZ) ............... 40 Table of annex Total pages SEPARATE DOCUMENT 2_20795542C_10_A1.PDF: DIAGRAMS OF TESTING 86 SEPARATE DOCUMENT 2_20795542C_10_A2.PDF: PHOTOS OF EUT 9 SEPARATE DOCUMENT 2_20795542C_10_A3.PDF: PHOTOS OF SET-UP 4 Test Report 2-20795542b/11, Page 3 of 40 2_20795542b_11.docx 1. Summary of test results The presented GSM 850/900/18…

Text truncated - open the document above for the full version.

Page 1 of 87 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM Laboratory Accreditation and Listings D-PL-12047-01-01 MRA US-EU 0003 Industry Canada Reg. No.: 3462D-1 3462D-2 Reg. No.: R-2665, R-2666 C-2914, T-1967 G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: [email protected] • Internet: www.cetecom.com Annex 1: Diagrams to TEST REPORT No.: 2-20795542b/11 for Quad-Band GSM/GPRS Module BGS2-W FCC-ID: QIPBGS2 IC: 7830A-BGS2 According to: FCC Regulations FCC Part 22H/24E FCC Part 15.207C FCC Part 15.209C & IC Regulations RSS-132, Issue 2 RSS-133, Issue 5 RSS-Gen, Issue 2 Cinterion Wireless Modules GmbH Annex 1 to Test Report 2-20795542b/11, Page 2 of 87 2_20795542b_11_A1.doc Table of contents 1. DIAGRAMS ......................................................................................................................................................... 3 1.1. 26dBc Emission bandwidth ............................................................................................................................. 3 1.2. 99% Occupied bandwidth ................................................................................................................................ 7 1.3. Spurious emissions conducted – GSM850 Mode (TX-mode) ......................................................................... 10 1.4. Spurious emissions conducted – GSM1900 Mode (TX-mode) ....................................................................... 18 1.5. Spurious emissions radiated – GSM850 Mode ................................................................................................ 26 1.6. Spurious emissions radiated – GSM1900 Mode .............................................................................................. 48 1.7. Radiated emissions in the frequency range above 18GHz – GSM1900 Mode ................................................ 76 1.8. Radiated magnetic field strength measurements (f<30MHz) .......................................................................... 78 1.9 Conducted emissions on AC-Power lines ......................................................................................................... 84 Annex 1 to Test Report 2-20795542b/11, Page 3 of 87 2_20795542b_11_A1.doc 1. Diagrams 1.1. 26dBc Emission bandwidth GSM 850 Att 40 dB* A PS Ref 36.3 dBm Offset 16.3 dB LVL 100 kHz/Center824.2 MHzSpan1 MHz * * 3DB RBW 3 kHz VBW 30 kHz SWT 115 ms AC 1 PK MAXH -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] 25.68 dBm 824.268910256 MHz ndB [T1] 26.00 dB BW 315.705128205 kHz T1 Temp 1 [T1 ndB] 0.43 dBm 824.041346154 MHz T2 Temp 2 [T1 ndB] 0.35 dBm 824.357051282 MHz Date: 9.FEB.2011 10:57:21 Channel 128 Ref 36.4 dBmAtt 40 dB* Offset 16.4 dB A LVL PS 100 kHz/Center837 MHzSpan1 MHz * * 3DB RBW 3 kHz VBW 30 kHz SWT 115 ms AC 1 PK MAXH -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] 25.76 dBm 837.067307692 MHz ndB [T1] 26.00 dB BW 317.307692308 kHz T1 Temp 1 [T1 ndB] -0.40 dBm 836.841346154 MHz T2 Temp 2 [T1 ndB] -1.43 dBm 837.158653846 MHz Date: 9.FEB.2011 10:54:27 Channel 192 Annex 1 to Test Report 2-20795542b/11, Page 4 of 87 2_20795542b_11_A1.doc Ref 36.4 dBmAtt 40 dB* * * Offset 16.4 dB 1 PK MAXH A LVL PS 3DB RBW 3 kHz VBW 30 kHz SWT 115 ms AC Center848.8 MHzSpan1 MHz100 kHz/ -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] 26.88 dBm 848.867307692 MHz ndB [T1] 26.00 dB BW 314.102564103 kHz T1 Temp 1 [T1 ndB] 0.92 dBm 848.642948718 MHz T2 Temp 2 [T1 ndB] 0.55 dBm 848.957051282 MHz Date: 9.FEB.2011 10:50:32 Channel 251 Annex 1 to Test Report 2-20795542b/11, Page 5 of 87 2_20795542b_11_A1.doc GSM 1900 Att 40 dB* A PS Ref 36.6 dBm Offset 16.6 dB LVL 100 kHz/Center1.8502 GHzSpan1 MHz * * 3DB RBW 3 kHz VBW 30 kHz SWT 115 ms AC 1 PK MAXH -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] 23.92 dBm 1.850267308 GHz ndB [T1] 26.00 dB BW 314.102564103 kHz T1 Temp 1 [T1 ndB] -2.78 dBm 1.850042949 GHz T2 Temp 2 [T1 ndB] -2.19 dBm 1.850357051 GHz Date: 9.FEB.2011 11:40:39 Channel 512 Att 40 dB* A PS Ref 36.6 dBm Offset 16.6 dB LVL 100 kHz/Center1.88 GHzSpan1 MHz * * 3DB RBW 3 kHz VBW 30 kHz SWT 115 ms AC 1 PK MAXH -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] 23.24 dBm 1.880068910 GHz ndB [T1] 26.00 dB BW 315.705128205 kHz T1 Temp 1 [T1 ndB] -2.91 dBm 1.879842949 GHz T2 Temp 2 [T1 ndB] -2.82 dBm 1.880158654 GHz Date: 9.FEB.2011 11:36:54 Channel 661 Annex 1 to Test Report 2-20795542b/11, Page 6 of 87 2_20795542b_11_A1.doc Att 40 dB* A PS Ref 36.6 dBm Offset 16.6 dB LVL 100 kHz/Center1.9098 GHzSpan1 MHz * * 3DB RBW 3 kHz VBW 30 kHz SWT 115 ms AC 1 PK MAXH -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] 24.38 dBm 1.909867308 GHz ndB [T1] 26.00 dB BW 312.500000000 kHz T1 Temp 1 [T1 ndB] -1.89 dBm 1.909644551 GHz T2 Temp 2 [T1 ndB] -1.21 dBm 1.909957051 GHz Date: 9.FEB.2011 11:33:01 Channel 810 Annex 1 to Test Report 2-20795542b/11, Page 7 of 87 2_20795542b_11_A1.doc 1.2. 99% Occupied bandwidth GSM 850 Att 40 dB* A PS * * RBW 3 kHz VBW 30 kHz SWT 115 ms AC 3DB Ref 36.3 dBm Offset 16.3 dB LVL Center824.2 MHzSpan1 MHz100 kHz/ *1 RM MAXH -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] 25.04 dBm 824.179166667 MHz OBW245.192307692 kHz T1 Temp 1 [T1 OBW] 9.66 dBm 824.078205128 MHz T2 Temp 2 [T1 OBW] 9.41 dBm 824.323397436 MHz Date: 9.FEB.2011 11:02:10 Channel 128 Att 40 dB* A PS * * 3DB RBW 3 kHz VBW 30 kHz SWT 115 ms AC Ref 36.4 dBm Offset 16.4 dB LVL Center837 MHzSpan1 MHz100 kHz/ *1 RM MAXH -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] 25.06 dBm 836.991987179 MHz OBW245.192307692 kHz T1 Temp 1 [T1 OBW] 9.58 dBm 836.878205128 MHz T2 Temp 2 [T1 OBW…

Text truncated - open the document above for the full version.