QIPEHS6GSM/GPRS/ EDGE/UMTS/HSPA Module

 EHS6 Version:01.441 DocId:EHS6_HIO_v01.441 Hardware Interface Overview GENERAL NOTE THE USE OF THE PRODUCT INCLUDING THE SOFTWARE AND DOCUMENTATION (THE "PROD- UCT") IS SUBJECT TO THE RELEASE NOTE PROVIDED TOGETHER WITH PRODUCT. IN ANY EVENT THE PROVISIONS OF THE RELEASE NOTE SHALL PREVAIL. THIS DOCUMENT CONTAINS INFORMATION ON CINTERION PRODUCTS. THE SPECIFICATIONS IN THIS DOCUMENT ARE SUB- JECT TO CHANGE AT CINTERION'S DISCRETION. CINTERION WIRELESS MODULES GMBH GRANTS A NON-EXCLUSIVE RIGHT TO USE THE PRODUCT. THE RECIPIENT SHALL NOT TRANS- FER, COPY, MODIFY, TRANSLATE, REVERSE ENGINEER, CREATE DERIVATIVE WORKS; DISAS- SEMBLE OR DECOMPILE THE PRODUCT OR OTHERWISE USE THE PRODUCT EXCEPT AS SPECIFICALLY AUTHORIZED. THE PRODUCT AND THIS DOCUMENT ARE PROVIDED ON AN "AS IS" BASIS ONLY AND MAY CONTAIN DEFICIENCIES OR INADEQUACIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, CINTERION WIRELESS MODULES GMBH DISCLAIMS ALL WARRANTIES AND LIABILITIES. THE RECIPIENT UNDERTAKES FOR AN UNLIMITED PERIOD OF TIME TO OBSERVE SECRECY REGARDING ANY INFORMATION AND DATA PROVIDED TO HIM IN THE CONTEXT OF THE DELIVERY OF THE PRODUCT. THIS GENERAL NOTE SHALL BE GOV- ERNED AND CONSTRUED ACCORDING TO GERMAN LAW. Copyright Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its con- tents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. Copyright © 2013, Cinterion Wireless Modules GmbH Trademark Notice Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other registered trademarks or trademarks mentioned in this doc- ument are property of their respective owners. EHS6_HIO_v01.441Page 2 of 382013-07-11 Confidential / Preliminary EHS6 Hardware Interface Overview 2  Document Name: EHS6 Hardware Interface Overview Version: 01.441 Date: 2013-07-11 DocId: EHS6_HIO_v01.441 Status Confidential / Preliminary EHS6 Hardware Interface Overview Contents 38 EHS6_HIO_v01.441Page 3 of 382013-07-11 Confidential / Preliminary  Contents 1Introduction ................................................................................................................. 6 1.1Key Features at a Glance .................................................................................. 6 1.2EHS6 System Overview..................................................................................... 9 2Interface Characteristics .......................................................................................... 10 2.1Application Interface ........................................................................................ 10 2.1.1USB Interface...................................................................................... 10 2.1.2Serial Interface ASC0 ......................................................................... 11 2.1.3Serial Interface ASC1 ......................................................................... 12 2.1.4UICC/SIM/USIM Interface ................................................................... 13 2.1.5Digital Audio Interface ......................................................................... 14 2.1.6GPIO Interface .................................................................................... 14 2.1.7I 2 C Interface ........................................................................................ 16 2.1.8SPI Interface ....................................................................................... 16 2.1.9HSIC Interface .................................................................................... 16 2.1.10 PWM Interfaces .................................................................................. 17 2.1.11 Pulse Counter ..................................................................................... 17 2.1.12 Status LED .......................................................................................... 17 2.1.13 Fast Shutdown .................................................................................... 17 2.2RF Antenna Interface ....................................................................................... 18 2.2.1Antenna Installation ............................................................................ 19 2.3Sample Application .......................................................................................... 20 3Operating Characteristics ........................................................................................ 22 3.1Operating Modes ............................................................................................. 22 3.2Power Supply ................................................................................................... 23 4Mechanical Dimensions, Mounting and Packaging ............................................... 24 4.1Mechanical Dimensions of EHS6..................................................................... 24 5Regulatory and Type Approval Information ........................................................... 26 5.1Directives and Standards ................................................................................. 26 5.2SAR requirements specific to portable mobiles ............................................... 29 5.3Reference Equipment for Type Approval ......................................................... 30 5.4Compliance with FCC and IC Rules and Regulations ..................................... 31 6Document Information.............................................................................................. 32 6.1Revision History ............................................................................................... 32 6.2Related Documents ..............................................................................…

Text truncated - open the document above for the full version.

Cinterion Wireless Modules EHS6 External Photos Top Side Bottom Side

Module EHS6 Label EHS6 label location lasing on shielding EHS6 label information

Cinterion Wireless Modules EHS6 Internal Photos Top Side Bottom Side

Page 1 of 66 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM Laboratory Accreditation and Listings Reg. No.: 736496 MRA US-EU 0003 Industry Canada Reg. No.: 3462D-1 Reg. No.: 3462D-2 Reg. No.: 3462D-3 Voluntary Controls for Electromagnetic Emissions Reg. No.: R-2665, R-2666 C-2914, T-1967, G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: [email protected] • Internet: www.cetecom.com TEST REPORT No.: 6-0147-12-19-6c Wireless Module EHS6 FCC-ID: QIPEHS6 IC-ID: 7830A-EHS6 According to: FCC Regulations Part 15.107, Part 15.109, Part 15.209 IC-Regulations RSS-Gen, Issue 3 Cinterion Wireless Modules GmbH for Test Report 6-0147-12-19-6c, Page 2 of 66 TR6-0147-12-19-6c Table of contents 1. SUMMARY OF TEST RESULTS...................................................................................................................... 3 1.1. TEST OVERVIEW ACCORDING FCC PART 15B/C AND CANADIAN RSS- OR ICES STANDARDS 3 2. ADMINISTRATIVE DATA ............................................................................................................................... 4 2.1. Identification of the testing laboratory ............................................................................................................. 4 2.2. Test location .................................................................................................................................................... 4 2.3. Organizational items ........................................................................................................................................ 4 2.4. Applicant’s details ........................................................................................................................................... 4 2.5. Manufacturer’s details ..................................................................................................................................... 4 3. EQUIPMENT UNDER TEST (EUT) ................................................................................................................. 5 3.1. EUT: Type, S/N etc. and short descriptions used in this test report ................................................................ 5 3.2. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions .................................................................. 5 3.3. EUT set-ups ..................................................................................................................................................... 5 3.4. EUT TX operating modes ................................................................................................................................ 6 3.5. EUT RX operating modes................................................................................................................................ 7 3.6. Additional declaration and description of EUT ............................................................................................... 7 3.7. Configuration of cables used for testing .......................................................................................................... 8 4. DESCRIPTION OF TEST SYSTEM SET-UP’S .............................................................................................. 9 4.1. Test system set-up for AC power-line conducted emission measurements ..................................................... 9 4.2. Test system set-up for radiated magnetic field measurements below 30 MHz ................................................ 10 4.3. Test system set-up for radiated electric field measurement 30 MHz to 1 GHz ............................................... 11 4.4. Test system set-up for radiated electric field measurement above 1 GHz ....................................................... 12 5. MEASUREMENTS ............................................................................................................................................. 13 5.1. General Limit - Conducted emissions on AC-Power lines .............................................................................. 13 5.2. General Limit - Radiated field strength emissions below 30 MHz .................................................................. 15 5.3. General Limit - Radiated field strength emissions, 30 MHz - 1 GHz .............................................................. 17 5.4. General Limit - Radiated emissions, above 1 GHz .......................................................................................... 18 5.5. Measurement uncertainties .............................................................................................................................. 19 6. ABBREVIATIONS USED IN THIS REPORT ................................................................................................. 19 7. ACCREDITATION DETAILS OF CETECOM’S LABORATORIES AND TEST SITES ......................... 20 8. INSTRUMENTS AND ANCILLARY ................................................................................................................ 21 8.1. Used equipment “CTC” ................................................................................................................................... 21 8.2. Measurement diagrams of emission test .......................................................................................................... 25 8.3. Radiated Magnetic Field Strength measurements (f<30MHz) ........................................................................ 41 8.4. Diagrams of radiated field strength emissions, 30 MHz - 1 GHz (Diagram group 03) ........…

Text truncated - open the document above for the full version.

Page 1 of 4 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM Annex 3: Test set-up photographs to TEST REPORTS No.: 6-0147-12-19-6 for According to: FCC Regulations Part 22, Part 24 IC-Regulations RSS-132 Issue 3, RSS-133 Issue 6, RSS-Gen Issue 3 Gemalto M2M GmbH Wireless Module EHS6 FCC-ID: QIPEHS6 IC-ID: 7830A-EHS6 Laboratory Accreditation and Listings Reg. No.: 736496 MRA US-EU 0003 Industry Canada Reg. No.: 3462D-1 Reg. No.: 3462D-2 Reg. No.: 3462D-3 Voluntary Controls for Electromagnetic Emissions Reg. No.: R-2665, R-2666 C-2914, T-1967, G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: [email protected] • Internet: www.cetecom.com Annex 3 to Test Report 6-0147-12-19-6, Page 2 of 4 TR6-0147-12-19-6b-A3 Table of contents 1. TEST SET-UP PHOTOGRAPHS ...................................................................................................................... 3 Annex 3 to Test Report 6-0147-12-19-6, Page 3 of 4 TR6-0147-12-19-6b-A3 1. Test set-up photographs Conducted emissions measurements on AC-mains (test report 6-0147-19-6c) Radiated field strength measurements in the FAR (Fully-Semi-Anechoic-Chamber) Annex 3 to Test Report 6-0147-12-19-6, Page 4 of 4 TR6-0147-12-19-6b-A3 Conducted emissions measurements in the Radio laboratory 1 Remark: change of applicant’s company name during the tests (former company Cinterion Wireless Modules GmbH)