QIPEHS8GSM/WCDMA Module

 M2M.GEMALTO.COM Cinterion ® EHS8 Hardware Interface Overview Version: 02.770 DocId: EHS8_HIO_v02.770 EHS8 Hardware Interface Overview EHS8_HIO_v02.770 2014-08-11 Confidential / Preliminary Cinterion ® Page 2 of 42 2 GENERAL NOTE THE USE OF THE PRODUCT INCLUDING THE SOFTWARE AND DOCUMENTATION (THE "PRODUCT") IS SUBJECT TO THE RELEASE NOTE PROVIDED TOGETHER WITH PRODUCT. IN ANY EVENT THE PROVISIONS OF THE RELEASE NOTE SHALL PREVAIL. THIS DOCUMENT CONTAINS INFORMATION ON GEMALTO M2M PRODUCTS. THE SPECIFICATIONS IN THIS DOCUMENT ARE SUBJECT TO CHANGE AT GEMALTO M2M'S DISCRETION. GEMALTO M2M GMBH GRANTS A NONEXCLUSIVE RIGHT TO USE THE PRODUCT. THE RECIPIENT SHA LL NOT TRANSFER , COPY, MODIFY, TRANSLATE, REVERSE ENGINEER, CREATE DERIVATIVE WORKS; DISASSEMBLE OR DECOMPILE THE PRODUCT OR OTHERWISE USE THE PRODUCT EXCEPT AS SPECIFICALLY AUTHORIZED. THE PRODUCT AND THIS DOCUMENT ARE PROVIDED ON AN "AS IS" BASIS ONLY AND MAY CONTAIN DEFICIENCIES OR INADEQUACIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, GEMALTO M2M GMBH DISC LAIMS ALL WARRANTIES AND LIABILITIES. THE RECIPIENT UNDERTAKES FOR AN UNLIMITED PERIOD OF TIME TO OBSERVE SECRECY REGARDING ANY INFORMATION AND DATA PROVIDED TO HIM IN THE CONTEXT OF THE DELIVERY OF THE PRODUCT. THIS GENERAL NOTE SHALL BE GOVERNED AND CONSTRUED ACCORDING TO GERMAN LAW. Copyright Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. Copyright © 2014, Gemalto M2M GmbH, a Gemalto Company Document Name: Cinterion ® EHS8 Hardware Interface Overview Version: 02.770 Date: 2014-08-11 DocId: EHS8_HIO_v02.770 Status Confidential / Preliminary Cinterion ® EHS8 Hardware Interface Overview Page 3 of 43 EHS8_HIO_v02.770 2014-08-11 Confidential / Preliminary Trademark Notice Gemalto, the Gemalto logo, are trademarks and service marks of Gemalto and are registered in certain countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other registered trademarks or trademarks mentioned in this document are property of their respective owners. Contents 42 Contents 1 Introduction ........................................................................................................................... 8 1.1 Key Features at a Glance .......................................................................................... 8 1.2 EHS8 System Overview .......................................................................................... 13 2 Interface Characteristics .................................................................................................... 14 2.1 Application Interface ................................................................................................ 14 2.1.1 USB Interface ............................................................................................ 14 2.1.2 Serial Interface ASC0 ................................................................................ 15 2.1.3 Serial Interface ASC1 ................................................................................ 15 2.1.4 UICC/SIM/USIM Interface ......................................................................... 16 2.1.5 Digital Audio Interface ............................................................................... 18 2.1.6 GPIO Interface .......................................................................................... 18 2.1.7 I 2 C Interface .............................................................................................. 19 2.1.8 SPI Interface ............................................................................................. 19 2.1.9 HSIC Interface .......................................................................................... 19 2.1.10 PWM Interfaces ...................................................................................... 20 2.1.11 Pulse Counter ......................................................................................... 20 2.1.12 Status LED .............................................................................................. 20 2.1.13 Fast Shutdown ........................................................................................ 20 2.2 RF Antenna Interface ............................................................................................... 21 2.2.1 Antenna Installation ................................................................................... 22 2.3 GPS Interface .......................................................................................................... 23 2.3.1 GPS Receiver ........................................................................................... 23 2.3.2 GPS Antenna ............................................................................................ 23 2.4 Sample Application .................................................................................................. 23 3 Operating Characteristics .................................................................................................. 26 3.1 Operating Modes ..................................................................................................... 26 3.2 Power Supply .......................................................................................................... 26 4 Mechanical Dimensions, Mounting and Packaging ......................................................... 28 4.1 Mechanical Dimensions of EHS8 ............................................................................ 28 5 Regulatory and Type Approval Information ...................................................................... 30 5.1 Directives and Standards …

Text truncated - open the document above for the full version.

gemalt~ Gemalte M2M GmbH · Siemensdamm 50 • 13629 .BeJlin • Germany Name Thorsten Liebig Ameriean Certification Body, Ine. Department System test 6731 Whittier Ave. Suite C110 MeLean, VA 22101 Phone +49 30 31102-8241 Fax +49 30 31102-8305 E-Mail [email protected] Your letter of Our referenee Berlin, August 18, 2014 Authority to Act as Agent To Whom It May Concern: Unilab (Shanghai) Co., Ud. is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, tha,t includes FCC benefits. Thank you, Agency Agreement Expiration Date: AUgust 18, 2015 By: Thorsten Liebig T!,tAd L~ t!u~ (Signature) a (Print name) Title: Manager Approval On behalf of: Gemalto M2M GmbH (Company Name) www.gemalto.comJm2m Registered Office: Managing Oirecters: Commercial register. Reg. No .: Gemalte M2M GmbH N erbert Muhrer. sebastien Galleis Amtsger icht Münch en. HRB172715 SI. ·Martin· Str. 60 WEEE· Reg.·Nr. OE 58893809 81541 Munich Germany

Gemalto M2M GmbH Modular Approval Reguest Letter August 18,2014 Dear Application Examiner, Gemalto M2M GmbH GSMIWCDMA Modular,modular name: EHS8, FCC ID: QIPEHS8 would like to have your authorization as a modular approval. The requirements of Public Notice DAOO-1407 have been met and shown on the following statements. Requirement ofPublic Notice DAOO-1407 / part 15.212 Answerfrom applicant I. The modular transmitter must have its own RF shielding. Yes, The EUT does provide a RF shielding. Refer to EUT Picture. 2 . The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements und er conditions of excessive data rates or over-modulation. Yes, the EUT has digital input buffer 3. The modular transmitter must have its own power supply regulation. Yes 4. The modular transmitter must comply with the antenna requirem-ents of Section 15.203 and 15 .204( c). The antenna must either be perrnanentiy attached or employ a "unique" antenna coupler (at all connections between the module and the antenna, including the cable) .. Yes, the EUT has been tested with one antenna. It has a unique antenna plug. 5 . The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Yes o. The modular transmitter must be labeled with its own FCC ID number, and, ifthe FCC 10 is not visible when the module is installed inside another device, then the outside of the device into wh ich the module is installed must also displayalabel referring to the enclosed modu'le. This exterior label can use wording such as the following: "Contains Transmitter Module FCC 10: XYZMODEL I" or "Col1tains FCC 10: XYZMODEL \. " Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example ofwhich must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy ofthese instructions must be included in the application for equipment authorization. Yes 7. The modular transmitter must comply with any specific mle or operating requirements applicabLe to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy ofthese instmctions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized tor operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231( e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. Yes 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, Fee Rules in Sections 2.1091,2. 1093 and specific SectionsofPart 15,including 15.319(i), 15.407(t), 15.253(t)and 15.255(g), require that Unlicensed pes, UNII and millimeter wave devices perform routine environmental evaluation tor RF Exposure to demonstrate compIiance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.24 7(b)( 4). Modular transmitters approved under other Sections of Part 15, Yes when necessary, mayaiso need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, instal\ers and other interested parties to ensure compliance. Best regards, Manager Approval

Gemalto M2M GmbH Request for Confidentiali!y Date: August 18, 2014 Subject: Confidentiality Request for: QIPEHS8 Pursuant to FCe 47 CRF 0.457(d) and 0.459 and IC RSP-IOO, Section 10, the applicant requests that apart ofthe subject FCC application be held confidential. Type ofConfidentiality Requested Exhibit D Short Term ~Pennanent Block Diagrams D Short Term External Photos o Short Term D Pennanent* J Internal Photos D Short Term ~Pennanent Operation DescriptionlTheory ofOperation D Short Tenn ~l Pennanent Parts List & Placement!BOM oShort Term ~I Pennanent Tune-Up Procedure D Short Term ~Permanent Schematics D Short Tenn Test Setup Photos D Short Term D Pennanent* User's Manual Gemalto M2M GmbH has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject infonnation easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: T he applicant requests the exhibits Iisted above as permanently confidential be pennanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short tenn confidential be withheld from public view for a period of (specity number of days not to exceed 180/_ days [rom the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive infonnation prior to marketing or release ofthe product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FeC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that rc distinguishes between Short Term and Permanent ConfidentiaJity, either type of marked exhibit above will simply be marked Confidential when submitted to rc. Sincerely, ~ h d· f- By: / ;:J~J /I 1'ut4( ~ Thorsten Liebig (Signature/Title 3 ) )" (Print name) I _ The asterisked items (*) require further justif'ication before permanent confidentiality will be allowed. These also currently require review by the FeC under their Pennit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for apotted device would be: "The EUT is FULLY potted using a non-removable epoxy based material. Removal ofpotting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting." 2 _ Please refer to http://acbcert.com/docurnentsimisc-docslMemo-Short-Term-Ys-Standard-Confidentiality.pdf for complete details. ) -Must be signed by applicant conlact given for applicant on the Fce site. or by the authorized agent ifan appropriate authorized agent letter has been provided. L tier hould be plac~d on appropriate letterhead.

gemal tox Gemalto M2M GmbH .Siemensdamm 50. 13629 Berlin. Germany Name Thorsten Liebig Department System Test - Approvals To whom it may concern Phone +49 30 31102-8247 Fax+49 30 31102-8305 E-Mail Thorsten. liebig@ gemalto.com Your letter of Our reference Berlin, 10 May 2016 Deciaration Dear ACB, We Gemalto declare that we sent an incorrect EHS8 module picture without shieldingto test house for FCC and CE approval, we want to update the correct picture of EHS8 to FCC and CE. Thanks a lot. FCC ID: QIPEHS8 IC: 7830A-EHS8 Modelname: EHS8, ACB project Number: ATCBO1 61 70 Gemalto M2M GmbH Siemensdamm 50 13629 Berlin Germany Liebig Thorsten Stephanie Reimert Manager Approvals Head of Portfolio Development M2M wiw.cjemaltocom/m2m Registered Office: Managing Directors: Commercial register, Reg. No.: Gemalto M2M GmbH Norbert Muhrer,Söbastien Gallois Amtsgericht Miinchen, HRB 172715 St-Martin-Str. 60 WEEE-Reg.-Nr. DE 58893809 81541 Munich Germany

Product Name: EHS8 EUT Photos Model Name: EHS8 Report Number: UL05420140724FCC/IC018-4 Page 1 of 3 EUT EXTERNAl PHOTOS View of EUT-1 View of EUT-2 1 2 2 1 Product Name: EHS8 EUT Photos Model Name: EHS8 Report Number: UL05420140724FCC/IC018-4 Page 2 of 3 View of EUT-3 View of EUT-4 Product Name: EHS8 EUT Photos Model Name: EHS8 Report Number: UL05420140724FCC/IC018-4 Page 3 of 3 View of EUT-5

Label and Label Location for EHS8

Unilab(Shanghai) Co.,Ltd Report No. : UL05420140724FCC/IC018-2 Page 1 of 5 Page:1of5 RF Exposure Evaluation Declaration Product Name : EHS8 Model No. : EHS8 FCC ID: QIPEHS8 IC: 7830A-EHS8 Applicant : Gemalto M2M GmbH. Address :Siemensdamm 50 Berlin 13629 Germany Date of Receipt : 24/07/2014 Issued Date :18/08/2014 Report No. : UL05420140724FCC/IC018-2 Report Version : V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, CNAS or any agency of the Government. The test report shall not be reproduced except in full without the written approval of UnilabCorporation. Unilab(Shanghai) Co.,Ltd Report No. : UL05420140724FCC/IC018-2 Page 2 of 5 Page:2of5 RF Exposure Evaluation Declaration Issued Date : 18/08/2014 Report No. : UL05420140724FCC/IC018-2 Product Name : EHS8 Applicant : Gemalto M2M GmbH. Address : Siemensdamm 50 Berlin 13629 Germany Manufacturer : Gemalto M2M GmbH. Address : Siemensdamm 50 Berlin 13629 Germany Model No. : EHS8 EUT Voltage Extreme Low:3.3V,Nominal:3.8V,Extreme High:4.5V Brand Name : N/A Applicable Standard : FCC OET Bulletin 65 Supplement C (Edition 01-01) Industry Canada RSS-102,Issue 4 Test Result : Complied Performed Location : Unilab (Shanghai) Co.,Ltd. FCC 2.948 register number is 714465 IC register number is 11025A-1 No.1350, Lianxi Road, Pudong New District, Shangha, China TEL:+86-21-5027-5125/FAX:+86-21-5027-7862 Documented By : (Technical Engineer: Andy Wei) Reviewed By : (Senior Engineer: Forest Cao) Approved By : (Supervisor: Eva Wang) Unilab(Shanghai) Co.,Ltd Report No. : UL05420140724FCC/IC018-2 Page 3 of 5 Page:3of5 1. EUT Description Product Name: EHS8 Model Name: EHS8 Hardware Version: B2 Software Version: 02.751 RF Exposure Environment: Uncontrolled GSM/ EDGE Support Band: GSM850/PCS1900 GPRS Class: 12 Tx Frequency Range: GSM 850: 824.2MHz to 848.8MHz PCS 1900: 1850.2MHz to 1909.8MHz Rx Frequency Range: GSM 850: 869.2MHz to 893.8MHz PCS 1900: 1930.2MHz to 1989.8MHz Type of modulation: GSM/GPRS for GMSK EDGE for 8PSK Antenna Type: Connector Antenna Peak Gain: GSM 850: 2.15dBi PCS 1900:2.15dBi WCDMA Support Band: WCDMA Band II Tx FrequencyRange: WCDMA Band II: 1850MHz ~1910MHz Rx FrequencyRange: WCDMA Band II: 1930MHz ~1990MHz Type of modulation: WCDMA(UMTS): QPSK Antenna Type: Connector AntennaPeak Gain: WCDMA Band II: 2.15dBi Support Band: WCDMA Band V Tx FrequencyRange: WCDMA Band V: 824MHz ~849MHz Rx FrequencyRange: WCDMA Band V: 869MHz ~894MHz Type of modulation: WCDMA(UMTS): QPSK Antenna Type: Connector AntennaPeak Gain: WCDMA Band V: 2.15dBi Unilab(Shanghai) Co.,Ltd Report No. : UL05420140724FCC/IC018-2 Page 4 of 5 Page:4of5 2. RF Exposure Evaluation 2.1 Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range(MHz) Electric Filed Strength (V/m) Magnetic Filed Strength (A/m) Power Density (mW/cm2) Average Time (Minutes) (A)Limits for Occupation/Control Exposures 300-1500 -- --F/3006 1500-100,000 -- --56 (B)Limits for General Occupation/UnControlled Exposures 300-1500 -- --F/15006 1500-100,000 -- --130 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*Pi*R2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 2.2.Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 22°Cand 45％ RH. Unilab(Shanghai) Co.,Ltd Report No. : UL05420140724FCC/IC018-2 Page 5 of 5 Page:5of5 2.3.Test Result of RF Exposure Evaluation This device is evaluated by mobile device with general population/uncontrolled exposure condition For this device, the calculation is using the most conservative values, and the results are as follows: Test Mode Antenna Gain (dBi) Maximum Output Power (dBm) Average Power (dBm) Average EIRP (mW) Calculated RF Exposure at d = 20cm (mW/cm2) MPE Limit (mW/cm2) GSM 850 2.15 34 27.15 518.8 0.10 0.55 PCS 1900 2.15 31 24.15 260.0 0.05 1.00 The averaged power calculated method are shown as below: Averaged power=Maximum burst averaged power(1 Tx Slot)-9dB Duty cycle =12.5% AverageEIRP Power=Average Power+Antenna Gain Test Mode Antenna Gain (dBi) Maximum Output Power (dBm) Maximum Output Power (mW) Calculated RF Exposure at d = 20cm (mW/cm2) MPE Limit (mW/cm2) WCDMA 850 2.15 25 518.8 0.10 0.55 WCDMA 1900 2.15 25 518.8 0.10 1.00 Duty cycle =100% Test Mode ERP (dBm) EIRP (dBm) Peak EIRP (mW) Average EIRP (mW) Calculated RF Exposure at d = 20cm (mW/cm2) MPE Limit (mW/cm2) GSM 850 33.58 35.73 3741.1 471.0 0.09 0.55 PCS 1900 --------- 30.51 1124.6 141.6 0.03 1.00 The frame-averaged power calculated method are shown as below: AverageEIRP=Peak EIRP-9dB Duty cycle =12.5% Test Mode ERP (dBm) EIRP (dBm) Peak EIRP (mW) Calculated RF Exposure at d = 20cm (mW/cm2) MPE Limit (mW/cm2) WCDMA 850 24.48 26.63 460.3 0.09 0.55 WCDMA 1900 ---------- 24.50 281.8 0.06 1.00 Duty cycle =100% This device can pass RF exposure limit.

Unilab(Shanghai) Co.,Ltd. Report No. : UL05420140724FCC/IC018-1 Page 1 of 96 RF Test Report Test in accordance with Federal Communications Commission(FCC) CFR TITLE 47, Parts 2, 22, 24 & Industry Canada (IC), RSS-GEN, 132,133 Product Name : EHS8 Model No. : EHS8 FCC ID : QIPEHS8 IC : 7830A-EHS8 Applicant : Gemalto M2M GmbH. Address : Siemensdamm 50 Berlin 13629 Germany Date of Receipt : 2014-07-24 Test Date : 2014-07-25~2014-08-08 Issued Date : 2014-08-18 Report No. : UL05420140724FCC/IC018-1 Report Version : V1.0 Notes： The test results only relate to these samples which have been tested. Partly using this report will not be admitted unless been allowed by Unilab. Unilab is only responsible for the complete report with the reported stamp of Unilab. Unilab(Shanghai) Co.,Ltd. Report No. : UL05420140724FCC/IC018-1 Page 2 of 96 Test Report Certification Issued Date : 2014-08-18 Report No. : UL05420140724FCC/IC018-1 Product Name : EHS8 Applicant : Gemalto M2M GmbH. Address : Siemensdamm 50 Berlin 13629 Germany Manufacturer : Gemalto M2M GmbH. Address : Siemensdamm 50 Berlin 13629 Germany Model No. : EHS8 EUT Voltage : MIN: 3.3V, NOR: 3.8V, MAX: 4.5V Brand Name : N/A FCC ID: QIPEHS8 IC: 7830A-EHS8 Applicable Standard : ANSI/TIA-603-C-2004; FCC CFR Title 47 Part 2; FCC CFR Title 47 Part 22 Subpart H; FCC CFR Title 47 Part24 Subpart E; RSS-GEN Issue 2; Industry Canada RSS-132, Issue 3; Industry Canada RSS-133, Issue 6; Test Result : Complied Performed Location : Unilab (Shanghai) Co., Ltd. FCC 2.948 register number is 714465 IC register number is 11025A-1 No. 1350, Lianxi Rd. Pudong New District, Shanghai, China TEL: +86-21-50275125 FAX: +86-21-50277862 Documented By : (Technical Engineer: Andy Wei) Reviewed By : (Senior Engineer: Forest Cao) Approved By : (Supervisor: Eva Wang) Unilab(Shanghai) Co.,Ltd. Report No. : UL05420140724FCC/IC018-1 Page 3 of 96 TABLE OF CONTENTS SUMMARY OF TEST RESULT ....................................................................................................................................... 5 1. General Information ........................................................................................................................................ 6 1.1. EUT Description ...................................................................................................................................... 6 1.2. Mode of Operation ................................................................................................................................. 7 1.3. Tested System Details .......................................................................................................................... 8 1.4. Configuration of Tested System ........................................................................................................... 9 1.5. EUT Exercise Software ......................................................................................................................... 9 2. Technical Test ................................................................................................................................................... 10 2.1. Test Environment .................................................................................................................................. 10 3. Peak Output Power ......................................................................................................................................... 11 3.1. Test Equipment ..................................................................................................................................... 11 3.2. Test Setup ............................................................................................................................................... 11 3.3. Limit ......................................................................................................................................................... 12 3.4. Test Procedure ...................................................................................................................................... 13 3.5. Uncertainty ............................................................................................................................................. 13 3.6. Test Result ............................................................................................................................................. 14 4. Occupied Bandwidth ........................................................................................................................................ 19 4.1. Test Equipment ..................................................................................................................................... 19 4.2. Test Setup .............................................................................................................................................. 19 4.3. Limit ......................................................................................................................................................... 20 4.4. Test Procedure ...................................................................................................................................... 20 4.5. Uncertainty ............................................................................................................................................. 20 4.6. Test Result ............................................................................................................................................. 21 5.Spurious Emission At Antenna Terminals (+/- 1MHz) ................................................................................. 33 5.1. Test Equipment ..................................................................................................................................... 33 5.2. Test Setup .......................................................................................................................…

Text truncated - open the document above for the full version.

Product Name: EHS8 Test Setup Photos Model Name: EHS8 Report Number: UL05420140724FCC/IC018-3 Page 1 of 3 TEST SETUP PHOTOS for Part 22&24 Occupied Bandwidth, Conducted Power Measurement, Spurious Emission At Antenna Terminals (+/- 1MHz), Conducted Spurious Emission Measurement Setup Product Name: EHS8 Test Setup Photos Model Name: EHS8 Report Number: UL05420140724FCC/IC018-3 Page 2 of 3 Frequency Stability Under Temperature & Voltage Variations Setup Product Name: EHS8 Test Setup Photos Model Name: EHS8 Report Number: UL05420140724FCC/IC018-3 Page 3 of 3 ERP Test, Radiated Spurious Measurement(30MHz to 1GHz) Setup Radiated Spurious Measurement (Above 1GHz), EIRP Test Setup