QIPHC25GSM/GPRS/EDGE/UMTS/HSDPA Module

s HC25 Siemens Cellular Engine Version:00.220 DocId:HC25_HO_v00.220 Hardware Interface Overview General Notes Product is deemed accepted by Recipient and is provided without interface to Recipient ́s products. The Product constitutes pre-release version and code and may be changed substantially before commercial release. The Product is provided on an “as is” basis only and may contain deficiencies or inadequacies. The Product is provided without warranty of any kind, express or implied. To the maximum extent per- mitted by applicable law, Siemens further disclaims all warranties, including without limitation any implied warranties of merchantability, fitness for a particular purpose and noninfringement of third-party rights. The entire risk arising out of the use or performance of the Product and documentation remains with Recipient. This Product is not intended for use in life support appliances, devices or systems where a malfunction of the product can reasonably be expected to result in personal injury. Applications incor- porating the described product must be designed to be in accordance with the technical specifications provided in these guidelines. Failure to comply with any of the required procedures can result in malfunc- tions or serious discrepancies in results. Furthermore, all safety instructions regarding the use of mobile technical systems, including GSM products, which also apply to cellular phones must be followed. Sie- mens AG customers using or selling this product for use in any applications do so at their own risk and agree to fully indemnify Siemens for any damages resulting from illegal use or resale. To the maximum extent permitted by applicable law, in no event shall Siemens or its suppliers be liable for any conse- quential, incidental, direct, indirect, punitive or other damages whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of business information or data, or other pecuniary loss) arising out the use of or inability to use the Product, even if Siemens has been advised of the possibility of such damages. Subject to change without notice at any time. Copyright Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its con- tents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. Copyright © Siemens AG 2007 HC25_HO_v00.220Page 2 of 392007-03-20 Confidential / Preliminary HC25 Hardware Interface Overview 2 s Document Name: HC25 Hardware Interface Overview Version: 00.220 Date: 2007-03-20 DocId: HC25_HO_v00.220 Status: Confidential / Preliminary Supported Products: HC25 HC25 Hardware Interface Overview Contents 39 s HC25_HO_v00.220Page 3 of 392007-03-20 Confidential / Preliminary Contents 1Introduction ................................................................................................................. 6 1.1Related Documents ........................................................................................... 6 1.2Terms and Abbreviations ................................................................................... 6 1.3Regulatory and Type Approval Information ....................................................... 9 1.3.1Directives and Standards ...................................................................... 9 1.4SAR requirements specific to portable mobiles ............................................... 11 1.4.1SELV Requirements ........................................................................... 11 1.5Safety Precautions ........................................................................................... 12 2Product Concept ....................................................................................................... 13 2.1Key Features at a Glance ................................................................................ 13 3Application Interface................................................................................................. 16 3.1Operating Modes ............................................................................................. 16 4Antenna Interface...................................................................................................... 17 4.1Antenna Installation ......................................................................................... 17 4.2Antenna Pad .................................................................................................... 18 4.3Antenna Connector .......................................................................................... 19 5Electrical, Reliability and Radio Characteristics.................................................... 23 5.1Absolute Maximum Ratings ............................................................................. 23 5.2Operating Temperatures .................................................................................. 24 5.3Storage Conditions .......................................................................................... 25 5.4Reliability Characteristics ................................................................................. 26 6Mechanics.................................................................................................................. 27 6.1Mechanical Dimensions of HC25 ..................................................................... 27 6.2Mounting HC25 to the Application Platform ..................................................... 29 6.3Board-to-Board Application Connector ............................................................ 29 7Reference Approval .................................................................................................. 31 7.1Reference Equipment for Type Approval .......................................................…

Text truncated - open the document above for the full version.

HC25 Siemens Cellular Engine Model(s) S30960-S1050-XXXX Siemens IMEI S30960-S1060-XXXX Customer IMEI HC25 Top Site HC25 Bottom Site

HC25 Siemens Cellular Engine Model(s) S30960-S1050-XXXX Siemens IMEI S30960-S1060-XXXX Customer IMEI HC25 Top Site HC25 Bottom Site

HC25 Siemens Cellular Engine Model(s) S30960-S1050-XXXX Siemens IMEI S30960-S1060-XXXX Customer IMEI HC25 Top Site HC25 Bottom Site

7 layers AG Aufsichtsratsvorsitzenderh Registergerichth registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Markus Becker USt-IdNr h VAT Nr: Phone: +49 (0) 2102 749 0 Vorstandh Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. Hans-Jürgen Meckelburg www.7Layers.com René Schildknecht InterLab  is a registered trademark of 7 layers AG FCC Measurement/Technical Report on GSM/UMTS module Siemens Cellular Engine HC25 Report Reference: MDE_Siem_0605_FCCd Test Laboratory: 7 layers AG Borsigstrasse 11 40880 Ratingen Germany email: [email protected] DAT-P-192/99-01 Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the testing laboratory. Test report Reference: MDE_Siem_0605_FCCd Page 2 of 24 Table of Contents 0 Summary 3 0.1 Technical Report Summary 3 0.2 Measurement Summary 4 1 Administrative Data 5 1.1 Testing Laboratory 5 1.2 Project Data 5 1.3 Applicant Data 5 1.4 Manufacturer Data 5 2 Product labeling 6 2.1 FCC ID label 6 2.2 Location of the label on the EUT 6 3 Test object Data 7 3.1 General EUT Description 7 3.2 EUT Main components 8 3.3 Ancillary Equipment 8 3.4 EUT Setups 8 3.5 Operating Modes 9 4 Test Results 10 4.1 Conducted emissions (AC power line) 10 4.2 Spurious radiated emissions 12 5 Test Equipment 16 6 Photo Report 19 7 Setup Drawings 23 8 Annex measurement plots 24 8.1 AC Mains conducted 24 Test report Reference: MDE_Siem_0605_FCCd Page 3 of 24 0 Summary 0.1 Technical Report Summary Type of Authorization Certification for an Intentional Radiator (PC Peripheral: GSM Module 850/900/1800/1900 with EDGE/W-CDMA) Applicable FCC Rules Prepared in accordance with the requirements of FCC Rules and Regulations as listed in 47 CFR Ch.1 Parts 2 (10-1-06 Edition) and 15 (10-1-06 Edition). The following subparts are applicable to the results in this test report. Part 2, Subpart J - Equipment Authorization Procedures, Certification Part 15, Subpart A – General § 15.33 Frequency range of radiated measurements Part 15, Subpart B – Unintentional Radiators § 15.101 Equipment authorization of unintentional radiators § 15.107 Conducted limits § 15.109 Radiated emission limits Note: none Summary Test Results: The EUT complied with all performed tests as listed in chapter 0.2 Measurement Summary. ,-layers 0.2 M e a s u r e m e nt S u m m a r y F C Part 15, Sub art B §L..,;1=.;5=.;.~1~0~7 Conducted e m is sio ns ( AC powe r li n e ) The m easu re m ent w as per form ed a ccord i ng t o ANS I C63,4 OP-Mode Setup Port op-mod e 1 Se t u p_ a Ol AC Port ( powe r lin e ) 2 003 Final Result passed _ FCC Part 1 5 Sub art B 15.109 Spu rious Radiated Em iss io ns The measurement w as perf or med acco rd i ng t o ANSI C63,4 2 0 03 OP-Mode Setup Port Final Result op-rnode 1 Setu p_ aOl Encl osure passed T h is r e p ort replaces the t st report referenced by: MDE_Siem_0605_FCCc, d a t e d on 2007-03-15. yers 1/, 7layers AG, Borsigs r. 11 ~ '" b ~ Lt I ec t"" 40880 Ratmge • Ge rmany of (5t'"..l.tt..J~~ ,Pho n .+-49 (0 )2102 74 ~ Q Respo nsible for 1/ IJ . IJ~IJ~ Respo nsibl e Acc red it at ion Scope: _~ii" ~ for Test Report: Test report Refer en ce: MDE_ Sie m_ 0 60 S_ FCCd Page 4 o f 24 Test report Reference: MDE_Siem_0605_FCCd Page 5 of 24 1 Administrative Data 1.1 Testing Laboratory Company Name: 7 Layers AG Address Borsigstr. 11 40880 Ratingen Germany This facility has been fully described in a report submitted to the FCC and accepted under the registration number 96716. The test facility is also accredited by the following accreditation organisation: - Deutscher Akkreditierungs Rat DAR-Registration no. DAT-P-192/99-01 Responsible for Accreditation Scope: Dipl.-Ing. Bernhard Retka Dipl.-Ing. Robert Machulec Dipl.-Ing. Thomas Hoell Report Template Version: 2007-03-19 1.2 Project Data Responsible for testing and report: Dipl.-Ing. Andreas Petz Date of Test(s): 2007-02-13 to 2007-02-15 Date of Report: 2007-03-19 1.3 Applicant Data Company Name: Siemens AG Address: Siemensdamm 50 13629 Berlin Germany Contact Person: Mr. Hussein Halawi 1.4 Manufacturer Data Company Name: please see applicant data Address: Contact Person: Test report Reference: MDE_Siem_0605_FCCd Page 6 of 24 2 Product labeling 2.1 FCC ID label At the time of the report there was no FCC label available. 2.2 Location of the label on the EUT see above Test report Reference: MDE_Siem_0605_FCCd Page 7 of 24 3 Test object Data 3.1 General EUT Description Equipment under Test GSM/UMTS module Type Designation: Siemens Cellular Engine HC25 Kind of Device: (optional) GSM 850/900/1800/1900 + UMTS FDD I/II/V module Voltage Type: DC Voltage level: 4.2 V General product description: The Equipment Under Test (EUT) is a GSM 850/900/1800/1900 module and supports GSM and EDGE mode and 3G UMTS FDD in the bands I/II/V. The EUT provides the following ports: Ports Enclosure Antenna connector The main components of the EUT are listed and described in Chapter 3.2 Test report Reference: MDE_Siem_0605_FCCd Page 8 of 24 3.2 EUT Main components Type, S/N, Short Descriptions etc. used in this Test Report Short Description Equipment under Test Type Designation Serial No. HW Status SW Status Date of Receipt EUT A (Code: 01900AP13) GSM/UMTS module Siemens Cellular Engine HC25 008970 B1.4 rev. 00.152 2007-01-15 Remark: EUT A is equipped with an antenna connector. NOTE: The short description is used to simplify the identification of the EUT in this test report. 3.3 Ancillary Equipment For the purposes of this test report, ancillary equipment is defined as equipment which is used in conjunction with the EUT to provide operational and control features to the EUT. It is necessary to configure the system in a typical fashion, as a customer would normally use it. But nevertheless Ancillary Equipment can influence the test results. Short Description Equipment under Test Type Designation HW Status SW Status Serial n…

Text truncated - open the document above for the full version.

Photo Report Photo 1: Test setup for radiated measurements Photo 2: Test setup for conducted measurements Photo 3: EUT (front side) (Photo is provided by customer and may not show the tested sample) Photo 4: EUT (rear side) (Photo is provided by customer and may not show the tested sample) Photo 5: Development Board DSB75 (without housing), with EUT (Photo is provided by customer and may not show the tested sample) Photo 6: Setup for radiated tests Photo 7: Setup for conducted tests