QIPPDS8GSM/WCDMA Module

Cinterion ® PDS8 Hardware Interface Overview Version: 02.800 DocId: PDS8_HIO_v02.800 M2M.GEMALTO.COM Cinterion ® PDS8 Hardware Interface Overview Page 2 of 35  PDS8 _HIO_v02.800 Confidential / Preliminary 2014-10-27 2 GENERAL NOTE THE USE OF THE PRODUCT INCLUDING THE SOFTWARE AND DOCUMENTATION (THE "PROD- UCT") IS SUBJECT TO THE RELEASE NOTE PROVIDED TOGETHER WITH PRODUCT. IN ANY EVENT THE PROVISIONS OF THE RELEASE NOTE SHALL PREVAIL. THIS DOCUMENT CONTAINS INFORMATION ON GEMALTO M2M PRODUCTS. THE SPECIFICATIONS IN THIS DOCUMENT ARE SUBJECT TO CHANGE AT GEMALTO M2M'S DISCRETION. GEMALTO M2M GMBH GRANTS A NON- EXCLUSIVE RIGHT TO USE THE PRODUCT. THE RECIPIENT SHALL NOT TRANSFER, COPY, MODIFY, TRANSLATE, REVERSE ENGINEER, CREATE DERIVATIVE WORKS; DISASSEMBLE OR DECOMPILE THE PRODUCT OR OTHERWISE USE THE PRODUCT EXCEPT AS SPECIFICALLY AUTHORIZED. THE PRODUCT AND THIS DOCUMENT ARE PROVIDED ON AN "AS IS" BASIS ONLY AND MAY CONTAIN DEFICIENCIES OR INADEQUACIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, GEMALTO M2M GMBH DISCLAIMS ALL WARRANTIES AND LIABILITIES. THE RECIPIENT UNDERTAKES FOR AN UNLIMITED PERIOD OF TIME TO OBSERVE SECRECY REGARDING ANY INFORMATION AND DATA PROVIDED TO HIM IN THE CONTEXT OF THE DELIV- ERY OF THE PRODUCT. THIS GENERAL NOTE SHALL BE GOVERNED AND CONSTRUED ACCORDING TO GERMAN LAW. Copyright Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its con- tents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. Copyright © 2014, Gemalto M2M GmbH, a Gemalto Company Trademark Notice Gemalto, the Gemalto logo, are trademarks and service marks of Gemalto and are registered in certain countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corpora- tion in the United States and/or other countries. All other registered trademarks or trademarks mentioned in this document are property of their respective owners. Document Name: Version: Date: DocId: Status Cinterion ® PDS8 Hardware Interface Overview 02.800 2014-10-27 PDS8_HIO_v02.800 Confidential / Preliminary Cinterion ® PDS8 Hardware Interface Overview Page 3 of 35  PDS8 _HIO_v02.800 Confidential / Preliminary 2014-10-27 Contents Contents 1 Introduction ................................................................................................................... 6 1.1 Key Features at a Glance ................................................................................... 6 1.2 PDS8 System Overview ..................................................................................... 9 2 Interface Characteristics ............................................................................................ 10 2.1 Application Interface .......................................................................................... 10 2.1.1 USB Interface ....................................................................................... 10 2.1.2 Serial Interface ASC0 .......................................................................... 11 2.1.3 UICC/SIM/USIM Interface .................................................................... 12 2.1.4 Digital Audio Interface .......................................................................... 14 2.1.5 GPIO Interface ...................................................................................... 14 2.1.6 I 2 C Interface ........................................................................................ 15 2.1.7 SPI Interface ......................................................................................... 15 2.1.8 Analog-to-Digital Converter (ADC) ...................................................... 16 2.1.9 PWM Interfaces .................................................................................... 16 2.1.10 Pulse Counter ....................................................................................... 16 2.1.11 Control Signals .................................................................................... 16 2.1.11.1 Network Connectivity ............................................................ 16 2.1.11.2 Power Indication Signal ........................................................ 16 2.1.11.3 Host Wakeup .......................................................................... 16 2.1.11.4 Fast Shutdown ...................................................................... 16 2.2 RF Antenna Interface ......................................................................................... 17 2.2.1 Antenna Installation .............................................................................. 17 3 Operating Characteristics .......................................................................................... 18 3.1 Operating Modes .............................................................................................. 18 3.2 Power Supply ..................................................................................................... 19 4 Mechanical Dimensions, Mounting and Packaging ................................................ 20 4.1 Mechanical Dimensions of PDS8 ..................................................................... 20 5 Regulatory and Type Approval Information ............................................................ 22 5.1 Directives and Standards ................................................................................... 22 5.2 SAR requirements specific to portable mobiles ................................................. 25 5.3 Reference Equipment for Type Approval ......................................................... 26 5.4 Compliance with FCC and IC Rules and Regulations ....................................... 27 6 Document Information .....................................................…

Text truncated - open the document above for the full version.

gemalt~ Gemalte M2M GmbH · Siemensdamm 50 • 13629 .BeJlin • Germany Name Thorsten Liebig Ameriean Certification Body, Ine. Department System test 6731 Whittier Ave. Suite C110 MeLean, VA 22101 Phone +49 30 31102-8241 Fax +49 30 31102-8305 E-Mail [email protected] Your letter of Our referenee Berlin, August 18, 2014 Authority to Act as Agent To Whom It May Concern: Unilab (Shanghai) Co., Ud. is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, tha,t includes FCC benefits. Thank you, Agency Agreement Expiration Date: AUgust 18, 2015 By: Thorsten Liebig T!,tAd L~ t!u~ (Signature) a (Print name) Title: Manager Approval On behalf of: Gemalto M2M GmbH (Company Name) www.gemalto.comJm2m Registered Office: Managing Oirecters: Commercial register. Reg. No .: Gemalte M2M GmbH N erbert Muhrer. sebastien Galleis Amtsger icht Münch en. HRB172715 SI. ·Martin· Str. 60 WEEE· Reg.·Nr. OE 58893809 81541 Munich Germany

Model Name: PDS8 Report Number: UL05420141020FCC/IC026-4 Page 1 of 3 EUT EXTERNAl PHOTOS View of EUT-1 View of EUT-2 1 Model Name: PDS8 Report Number: UL05420141020FCC/IC026-4 Page 2 of 3 View of EUT-3 View of EUT-4 Model Name: PDS8 Report Number: UL05420141020FCC/IC026-4 Page 3 of 3 View of EUT-5

Label and Label Location for PDS8

Model Name: PDS8 Report Number: UL05420141020FCC/IC026-5 Page 1 of 1 EUT INTERNAL PHOTOS View of EUT-1 View of EUT-2

Unilab(Shanghai) Co.,Ltd Report No. : UL05420141020FCC/IC026-2 Page 1 of 5 Page:1of5 RF Exposure Evaluation Declaration Product Name : PDS8 Model No. : PDS8 FCC ID: QIPPDS8 IC: 7830A-PDS8 Applicant : Gemalto M2M GmbH. Address :Siemensdamm 50 Berlin 13629 Germany Date of Receipt : 10-20-2014 Issued Date :10-26-2014 Report No. : UL05420141020FCC/IC026-2 Report Version : V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, CNAS or any agency of the Government. The test report shall not be reproduced except in full without the written approval of UnilabCorporation. Unilab(Shanghai) Co.,Ltd Report No. : UL05420141020FCC/IC026-2 Page 2 of 5 Page:2of5 RF Exposure Evaluation Declaration Issued Date : 10-26-2014 Report No. : UL05420141020FCC/IC026-2 Product Name : PDS8 Applicant : Gemalto M2M GmbH. Address : Siemensdamm 50 Berlin 13629 Germany Manufacturer : Gemalto M2M GmbH. Address : Siemensdamm 50 Berlin 13629 Germany Model No. : PDS8 EUT Voltage Extreme Low:3.3V,Nominal:3.8V,Extreme High:4.5V Brand Name : N/A Applicable Standard : FCC OET Bulletin 65 Supplement C (Edition 01-01) Industry Canada RSS-102,Issue 4 Test Result : Complied Performed Location : Unilab (Shanghai) Co.,Ltd. FCC 2.948 register number is 714465 IC register number is 11025A-1 No.1350, Lianxi Road, Pudong New District, Shangha, China TEL:+86-21-5027-5125/FAX:+86-21-5027-7862 Documented By : (Technical Engineer: Andy Wei) Reviewed By : (Senior Engineer: Forest Cao) Approved By : (Supervisor: Eva Wang) Unilab(Shanghai) Co.,Ltd Report No. : UL05420141020FCC/IC026-2 Page 3 of 5 Page:3of5 1. EUT Description Product Name: PDS8 Model Name: PDS8 Hardware Version: V2.1 Software Version: 03.000 RF Exposure Environment: Uncontrolled GSM/ EDGE Support Band: GSM850/PCS1900 GPRS Class: 12 Tx Frequency Range: GSM 850: 824.2MHz to 848.8MHz PCS 1900: 1850.2MHz to 1909.8MHz Rx Frequency Range: GSM 850: 869.2MHz to 893.8MHz PCS 1900: 1930.2MHz to 1989.8MHz Type of modulation: GMSK for GSM/GPRS 8PSK for EDGE Antenna Type: Connector Antenna Peak Gain: GSM 850: 2.15dBi PCS 1900:2.15dBi WCDMA Support Band: WCDMA Band II Tx FrequencyRange: WCDMA Band II: 1850MHz ~1910MHz Rx FrequencyRange: WCDMA Band II: 1930MHz ~1990MHz Type of modulation: WCDMA(UMTS): QPSK Antenna Type: Connector AntennaPeak Gain: WCDMA Band II: 2.15dBi Support Band: WCDMA Band V Tx FrequencyRange: WCDMA Band V: 824MHz ~849MHz Rx FrequencyRange: WCDMA Band V: 869MHz ~894MHz Type of modulation: WCDMA(UMTS): QPSK Antenna Type: Connector AntennaPeak Gain: WCDMA Band V: 2.15dBi Unilab(Shanghai) Co.,Ltd Report No. : UL05420141020FCC/IC026-2 Page 4 of 5 Page:4of5 2. RF Exposure Evaluation 2.1 Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range(MHz) Electric Filed Strength (V/m) Magnetic Filed Strength (A/m) Power Density (mW/cm2) Average Time (Minutes) (A)Limits for Occupation/Control Exposures 300-1500 -- --F/3006 1500-100,000 -- --56 (B)Limits for General Occupation/UnControlled Exposures 300-1500 -- --F/15006 1500-100,000 -- --130 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*Pi*R2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. 2.2.Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 22°Cand 45％ RH. Unilab(Shanghai) Co.,Ltd Report No. : UL05420141020FCC/IC026-2 Page 5 of 5 Page:5of5 2.3.Test Result of RF Exposure Evaluation This device is evaluated by mobile device with general population/uncontrolled exposure condition For this device, the calculation is using the most conservative values, and the results are as follows: Test Mode Antenna Gain (dBi) Maximum Output Power (dBm) Average Power (dBm) Average EIRP (mW) Calculated RF Exposure at d = 20cm (mW/cm2) MPE Limit (mW/cm2) GSM 850 2.15 34 27.15 518.8 0.10 0.55 PCS 1900 2.15 31 24.15 260.0 0.05 1.00 The averaged power calculated method are shown as below: Averaged power=Maximum burst averaged power(1 Tx Slot)-9dB Duty cycle =12.5% AverageEIRP Power=Average Power+Antenna Gain Test Mode Antenna Gain (dBi) Maximum Output Power (dBm) Maximum Output Power (mW) Calculated RF Exposure at d = 20cm (mW/cm2) MPE Limit (mW/cm2) WCDMA 850 2.15 25 518.8 0.10 0.55 WCDMA 1900 2.15 25 518.8 0.10 1.00 Duty cycle =100% Test Mode ERP (dBm) EIRP (dBm) Peak EIRP (mW) Average EIRP (mW) Calculated RF Exposure at d = 20cm (mW/cm2) MPE Limit (mW/cm2) GSM 850 33.50 35.65 3672.82 462.38 0.09 0.55 PCS 1900 --------- 30.99 1256.03 158.12 0.03 1.00 The frame-averaged power calculated method are shown as below: AverageEIRP=Peak EIRP-9dB Duty cycle =12.5% Test Mode ERP (dBm) EIRP (dBm) Peak EIRP (mW) Calculated RF Exposure at d = 20cm (mW/cm2) MPE Limit (mW/cm2) WCDMA 850 24.77 26.92 492.04 0.10 0.55 WCDMA 1900 ---------- 24.37 273.53 0.05 1.00 Duty cycle =100% This device can pass RF exposure limit.

Unilab(Shanghai) Co.,Ltd. Report No. : UL05420141020FCC/IC026-1 Page 1 of 96 RF Test Report Test in accordance with Federal Communications Commission(FCC) CFR TITLE 47, Parts 2, 22, 24 & Industry Canada (IC), RSS-GEN, 132,133 Product Name : PDS8 Model No. : PDS8 FCC ID : QIPPDS8 IC : 7830A-PDS8 Applicant : Gemalto M2M GmbH. Address : Siemensdamm 50 Berlin 13629 Germany Date of Receipt : 10-20-2014 Test Date : 10-20-2014~10-26-2014 Issued Date : 10-26-2014 Report No. : UL05420141020FCC/IC026-1 Report Version : V1.0 Notes： The test results only relate to these samples which have been tested. Partly using this report will not be admitted unless been allowed by Unilab. Unilab is only responsible for the complete report with the reported stamp of Unilab. Unilab(Shanghai) Co.,Ltd. Report No. : UL05420141020FCC/IC026-1 Page 2 of 96 Test Report Certification Issued Date : 10-26-2014 Report No. : UL05420141020FCC/IC026-1 Product Name : PDS8 Applicant : Gemalto M2M GmbH. Address : Siemensdamm 50 Berlin 13629 Germany Manufacturer : Gemalto M2M GmbH. Address : Siemensdamm 50 Berlin 13629 Germany Model No. : PDS8 EUT Voltage : MIN: 3.3V, NOR: 3.8V, MAX: 4.5V Brand Name : N/A FCC ID: QIPPDS8 IC: 7830A-PDS8 Applicable Standard : ANSI/TIA-603-C-2004; FCC CFR Title 47 Part 2; FCC CFR Title 47 Part 22 Subpart H; FCC CFR Title 47 Part24 Subpart E; RSS-GEN Issue 2; Industry Canada RSS-132, Issue 3; Industry Canada RSS-133, Issue 6; Test Result : Complied Performed Location : Unilab (Shanghai) Co., Ltd. FCC 2.948 register number is 714465 IC register number is 11025A-1 No. 1350, Lianxi Rd. Pudong New District, Shanghai, China TEL: +86-21-50275125 FAX: +86-21-50277862 Documented By : (Technical Engineer: Andy Wei) Reviewed By : (Senior Engineer: Forest Cao) Approved By : (Supervisor: Eva Wang) Unilab(Shanghai) Co.,Ltd. Report No. : UL05420141020FCC/IC026-1 Page 3 of 96 TABLE OF CONTENTS SUMMARY OF TEST RESULT ....................................................................................................................................... 5 1. General Information ........................................................................................................................................ 6 1.1. EUT Description ...................................................................................................................................... 6 1.2. Mode of Operation ................................................................................................................................. 7 1.3. Tested System Details .......................................................................................................................... 8 1.4. Configuration of Tested System ........................................................................................................... 9 1.5. EUT Exercise Software ......................................................................................................................... 9 2. Technical Test ................................................................................................................................................... 10 2.1. Test Environment .................................................................................................................................. 10 3. Peak Output Power ......................................................................................................................................... 11 3.1. Test Equipment ..................................................................................................................................... 11 3.2. Test Setup ............................................................................................................................................... 11 3.3. Limit ......................................................................................................................................................... 12 3.4. Test Procedure ...................................................................................................................................... 13 3.5. Uncertainty ............................................................................................................................................. 13 3.6. Test Result ............................................................................................................................................. 14 4. Occupied Bandwidth ........................................................................................................................................ 19 4.1. Test Equipment ..................................................................................................................................... 19 4.2. Test Setup .............................................................................................................................................. 19 4.3. Limit ......................................................................................................................................................... 20 4.4. Test Procedure ...................................................................................................................................... 20 4.5. Uncertainty ............................................................................................................................................. 20 4.6. Test Result ............................................................................................................................................. 21 5.Spurious Emission At Antenna Terminals (+/- 1MHz) ................................................................................. 33 5.1. Test Equipment ..................................................................................................................................... 33 5.2. Test Setup .......................................................................................................................…

Text truncated - open the document above for the full version.

Model Name: PDS8 Report Number: UL05420141020FCC/IC026-3 Page 1 of 3 TEST SETUP PHOTOS for Part 22&24 Occupied Bandwidth, Conducted Power Measurement, Spurious Emission At Antenna Terminals (+/- 1MHz), Conducted Spurious Emission Measurement Setup Model Name: PDS8 Report Number: UL05420141020FCC/IC026-3 Page 2 of 3 Frequency Stability Under Temperature & Voltage Variations Setup Model Name: PDS8 Report Number: UL05420141020FCC/IC026-3 Page 3 of 3 ERP Test, Radiated Spurious Measurement(30MHz to 1GHz) Setup Radiated Spurious Measurement (Above 1GHz), EIRP Test Setup