QIPPHS8-USGSM/GPRS/UMTS/HSPA Module

 PHS8-US Version:01.000 DocId:PHS8-US_HIO_v01.000 Hardware Interface Overview GENERAL NOTE THE USE OF THE PRODUCT INCLUDING THE SOFTWARE AND DOCUMENTATION (THE "PROD- UCT") IS SUBJECT TO THE RELEASE NOTE PROVIDED TOGETHER WITH PRODUCT. IN ANY EVENT THE PROVISIONS OF THE RELEASE NOTE SHALL PREVAIL. THIS DOCUMENT CON- TAINS INFORMATION ON CINTERION PRODUCTS. THE SPECIFICATIONS IN THIS DOCUMENT ARE SUBJECT TO CHANGE AT CINTERION'S DISCRETION. CINTERION WIRELESS MODULES GMBH GRANTS A NON-EXCLUSIVE RIGHT TO USE THE PRODUCT. THE RECIPIENT SHALL NOT TRANSFER, COPY, MODIFY, TRANSLATE, REVERSE ENGINEER, CREATE DERIVATIVE WORKS; DISASSEMBLE OR DECOMPILE THE PRODUCT OR OTHERWISE USE THE PRODUCT EXCEPT AS SPECIFICALLY AUTHORIZED. THE PRODUCT AND THIS DOCUMENT ARE PROVIDED ON AN "AS IS" BASIS ONLY AND MAY CONTAIN DEFICIENCIES OR INADEQUACIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, CINTERION WIRELESS MODULES GMBH DIS- CLAIMS ALL WARRANTIES AND LIABILITIES. THE RECIPIENT UNDERTAKES FOR AN UNLIMITED PERIOD OF TIME TO OBSERVE SECRECY REGARDING ANY INFORMATION AND DATA PRO- VIDED TO HIM IN THE CONTEXT OF THE DELIVERY OF THE PRODUCT. THIS GENERAL NOTE SHALL BE GOVERNED AND CONSTRUED ACCORDING TO GERMAN LAW. Copyright Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its con- tents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. Copyright © 2012, Cinterion Wireless Modules GmbH Trademark Notice Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other registered trademarks or trademarks mentioned in this document are property of their respective owners. PHS8-US_HIO_v01.000Page 2 of 402012-01-06 Confidential / Released PHS8-US Hardware Interface Overview 2  Document Name: PHS8-US Hardware Interface Overview Version: 01.000 Date: 2012-01-06 DocId: PHS8-US_HIO_v01.000 Status Confidential / Released PHS8-US Hardware Interface Overview Contents 40 PHS8-US_HIO_v01.000Page 3 of 402012-01-06 Confidential / Released  Contents 1Introduction ................................................................................................................. 6 1.1Related Documents ........................................................................................... 6 1.2Terms and Abbreviations ................................................................................... 6 1.3Regulatory and Type Approval Information ..................................................... 10 1.3.1Directives and Standards .................................................................... 10 1.3.2SAR requirements specific to portable mobiles .................................. 12 1.3.3SELV Requirements ........................................................................... 13 1.3.4Safety Precautions .............................................................................. 13 2Product Concept ....................................................................................................... 15 2.1Key Features at a Glance ................................................................................ 15 2.2PHS8-US System Overview ............................................................................ 18 3Application Interface................................................................................................. 19 3.1Operating Modes ............................................................................................. 20 3.2Power Supply ................................................................................................... 21 3.3USB Interface................................................................................................... 22 3.4Serial Interface ASC0 ...................................................................................... 23 3.5UICC/SIM/USIM Interface ................................................................................ 25 3.6Analog Audio Interface..................................................................................... 27 3.7Digital Audio Interface ...................................................................................... 27 4GPS Receiver............................................................................................................. 28 5Antenna Interfaces.................................................................................................... 29 5.1GSM/UMTS Antenna Interface ........................................................................ 29 5.1.1Antenna Installation ............................................................................ 30 5.2GPS Antenna Interface .................................................................................... 31 6Mechanics.................................................................................................................. 33 6.1Mechanical Dimensions of PHS8-US .............................................................. 33 7Sample Application................................................................................................... 35 8Reference Approval .................................................................................................. 37 8.1Reference Equipment for Type Approval ......................................................... 37 8.2Compliance with FCC and IC Rules and Regulations ..................................... 38 9Appendix.................................................................................................................... 39 9.1List of Parts and Accessories........................................................................... 39 PHS8-US Hardware Interface Overview Ta b l e s 40 PHS8-US_HIO_v01.000Page 4 of 402012-01-06 Confidential / …

Text truncated - open the document above for the full version.

Cinterion Wireless Modules GmbH, Siemensdamm 50 • 13629 Berlin • Germany Name Thorsten Liebig Federal Communication Commission Department Manager Approval Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Phone +493031102-8241 Fax +493031102-8305 Columbia, MD 21048 E-Mail [email protected] Your letter of Our reference Date 13 January 2012 TO WHOM IT MA Y CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission's Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Cinterion requests confidentiality for the following products: FCC ID Number Product Title/Model QIPPHS8-US Cinterion Wireless Module PHS8-US For the product stated above, we request that the following information be held confidential: 1. Circuit diagrams, BOM, and PCBs submitted as Equipment Authorization Electronic Filing attachment: "schematics". 2. Block diagram submitted as Equipment Authorization Electronic FHing attachment: "blockdiagram" . 3. Operational description submitted as Equipment Authorization Electronic Filing attachment: "operational: description" (highly technical / not addressed to the public) 4. Tune Up Information submitted as Equipment Authorization Electronic Filing attachment: "Tune Up Info" The above exhibits contain Cinterion trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our mobile handset. This material is not customarily available to the general public and we request that it be withhe'ld from public inspection. If you have any questions, please feel free to con ct me at the address shown below. Sincerely, Thorsten Liebigl Approval Manager /h~~ Registered office: Managing directors: Commercial register. Reg. no.: Cinterion Wireless Modules GmbH Norbert Muhrer, SElbastian Gallois Amtsgericht München, HRB 172715 St.-Martin-Slraße 53 WEEE-Reg .-Nr. OE 58893809 81669 München Germany

Cinterioo Wireless Modules GmbH' Siemensdamm SO • 13629 Berlin • Germany Name Thorsten Liebig Federal Communications Commission Department Approvals 7435 Oakland Mills Road Columbia MD 21046 Phone +493031102-8241 Fax +493031102-8305 E-Mail [email protected] Your letter of Dur reference Date 13 January 2012 Subject: Equipment authorisation request for new product variant PHS8-US To Whom It May Concern: The Cinterion Wireless Module PHS8-US is a variant of the already FCC granted Module PHS8-P: FCCID: QIPPHS8-P Grant Date: 12/14/2011 The Hardware and Software between the original and the variant are electrically identical with the exception that the non-US frequency bands (GSM 900/1800MHz) and the WCDMA (FDD Band I and Band VIII) are deactivated by SW and the deactivated RF­ transmitter components will not be populated on the PCB. The new identification for this variant is: Modul'e: PHS8-US FCC ID: QIPPHS8-US The original test results are applicable and representative öf this changed device Sincerely, n~L Thorsten Liebig Manager Approvals Berlin: 13. January 2012 Registered office: Managing directors: Commercial register, Reg . no .: Cinterion Wireless Modules GmbH Norbert Muhrer, 5ebastien Gallois Amtsgericht München, HRB 172715 St.-Martin-5traße 53 WEEE-Reg.-Nr. OE 58893809 81669 München Germany

Commercial power of attorney This letter is a commercial power of attorney for PHS8-US, FCC-ID: QIPPHS8-US Commercial power of attorney for the licence/registration of PHS8-US, FCC-ID: QIPPHS8-US in several countries. The company 7 layers AG, 40880 Ratingen, Germany, contact person Rene Houx has been contracted by Cinterion Wireless Modules GmbH to obtain approvals for the following electronic components, manufactured and/or released by Cinterion: Commercial name: Cinterion Wireless Module PHS8-US Product name: PHS8-US Engineering name: This is a GSM/UMTS/HSPA Module Unless future correspondence from Cinterion directs otherwise, please extend your full cooperation to 7 layers AG, contact person Rene Houx regardin9 matters to the above mentioned products for the period beginning January 01, 2012 and end December 31, 2012. Do not hesitate to contact me if you have any additional questions. Berlin January 05, 2012 Point of contact: Thorsten Liebig Company: Cinterion Wireless Modules GmbH Siemensdamm 50 13629 Bel"lin Germany Gille~ Signed, Head of Portfolio Development

Cinterion Wireless Modules GmbH· Siemensdamm 50 • 136;l9 Benin · Germany Name Thorsten Liebig Department Manager Approval Federal Communication Commission 7435 Oakland Milis Road Phone +49 30 31102-8241 Columbia, MD 21048 Fax +49 30 31102-8305 E-Mail [email protected] Your letter of Our reference Date 05 January 2012 Request for Single Modular Approval for QIPPHSB-US To Whom It May Concern: We, Cinterion Wireless Modules GmbH, hereby requests for single modular approval ace to FCC KOB 996369 "Transmitter Module Equipment Authorization Guide" BrandfTrade/Manufacturer's name: Cinterion Wireless Module PHS8-US Model name: PHS8-US FCC certification number: QIPPHS8-US Cinterion confirms that the product complies with the requirements ace to FCC KOB 996369 identified below: 1. The modular transmitter has its own RF shielding. 2. The module has buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal 3. The module has its own power supply regulation on the module. 5. The modular transmitter is tested in a stand-alone configuration. 6. The modular transmitter is labelled with its own FCC 10 number. Labelling instructions for host devices are stated in the integration manual. 7. The modular transmitter is comply with any specific rules or operating requirements that ordinaril'y apply to a complete transmitter and the manufacturer provide adequate instructions along with the module to explain any such requirements 8. The modular transmitter complies with RF exposure requirements for mobile and fixed host devices in its final configuration. Thorsten Liebig (Manager Approval) Registered office: Managing directOfs : Commercial register, Reg . no.: Cinterion Wireless Modules GmbH Norbert Muhrer, Sebastien Gallois Amtsgericht M ünchen, HRB 172715 St.-Martin-Straße 53 WEEE-Reg .-Nr. OE 58893809 81669 München Germany

Cinterion Wireless Modules GmbH· Siemensdamm 50 • 13629 Bertin • Germany Federal Communication Commission Name Thorsten Liebig Equipment Authorization Division, Application Department Manager Approval Processing Branch 7435 Oakland Mills Road Phone +49 30 31102-8241 Columbia, MD 21048 Fax +49 30 31102-8305 E-Mail [email protected] Your letter of Our reference Date 13 January 2012 Request for Short Term Confidentiality FCC ID: QIPPHS8-US To Whom It May Concern: In accordance with §0.459(d) of CFR 47 and Public Notice DA 04-1705, Cinterion requests The following item 1. User Guide / Installation Manual 2. Internal Photographs be held short term confidential until 31 st of January 20112 These items contain detailed system and equipment description and related information about the product which Cinterion considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Cinterion also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. Sincerely Thorsten 'Liebig Manager Approval /Jt/Y-j~ Registered office: Managing directors: Commercial register, Reg. no .. Cintenon Wireless Modules GmbH Norbert Muhrer. Sebastlen Gallois Amtsgericht München, HRB 172715 St.-Martin-Straße 53 WEEE-Reg.-Nr. DE 58893809 81669 München Germany

Cinterion Wireless Module PHS8-US PHS8-US Top side PHS8-US Bottom Side

Cinterion Wireless Module PHS8-US Label PHS8 -US Label PHS8-US Label location

Cinterion Wireless Module PHS8-US PHS8-US Top side PHS8-US Bottom Side

7 layers AG Aufsichtsratsvorsitzender Registergericht registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Markus Becker USt-IdNr VAT No.: Phone: +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7Layers.com Mr. René Houx 2011-12-01 Phone +49 (0) 2102 749 318 Fax +49 (0) 2102 749 350 e-Mail : René[email protected] Maximum Permissible Exposure for product: Cinterion Wireless Module PHS8-P Dear Mr. Liebig, please find enclosed your Maximum Permissible Exposure calculations for the Cinterion Wireless Module PHS8-P. Best Regards René Houx (Project Manager) Cinterion Wireless Modules GmbH Mr. Thorsten Liebig Siemensdamm 50 13629 Berlin Germany MDE_CINTE_1108 - 2 - Maximum Permissible Exposure (as specified in Table 1B of 47 CFR 1.1310 – Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure) Frequency range (MHz)Power density (mW/cm²) 300 – 1500 f/1500 1,500 – 100000 1.0 General Comment Calculations 850 MHz band Maximum average output power at Antenna terminal: 30.49 dBm (Max average power = 33.50 dBm – 3.01 dBm duty cycle) Maximum output power at Antenna terminal: 33.80 dBm (Max peak power = 33.80 dBm) Prediction distance R: 20 cm Prediction frequency: 824.20 MHz MPE limit S: 0.5495 mW/cm² Equation OET bulletin 65, page 18, edition 97-01: S = P*G / (4πR²) S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna Maximum permissible antenna gain (Table 1B of 47 CFR 1.1310): 3.92 dBi Maximal permissible antenna gain considering output power limitation of 7 Watts ERP (FCC §22.931). G=10*log(7000)-33.80+2.15 6.79 dBi Prediction The maximum allowed MPE value of 0. 5495 mW/cm² will be reached in a distance of 20 cm in case that an antenna with an antenna gain of 3.92 dBi is used. Considering the max output power of 7 Watts ERP (FCC §22.931) for mobile stations the maximum antenna gain is 6.79 dBi, which is higher than 3.92 dBi. For mobile stations the antenna gain is limited to 3.92 dBi in accordance to the FCC regulations. - 3 - Calculations 1900 MHz band Maximum average output power at Antenna terminal: 27.29 dBm (Max average power = 30.30 dBm – 3.01 dBm duty cycle) Maximum output power at Antenna terminal: 30.50 dBm (Max peak power = 30.50 dBm) Prediction distance R: 20 cm Prediction frequency: 1880.00 MHz MPE limit S: 1 mW/cm² Equation OET bulletin 65, page 18, edition 97-01: S = P*G / (4πR²) S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna Maximum permissible antenna gain (Table 1B of 47 CFR 1.1310): 9.72 dBi Maximum permissible antenna gain for mobile / portable stations: 2.51 dBi (Considering 2 Watts EIRP FCC §24.235: G=10*log(2000)-30.50) Prediction The maximum allowed MPE value of 1 mW/cm² will be reached in a distance of 20 cm in case that an antenna with an antenna gain of 9.72 dBi is used. Considering the max output power of 2 Watts EIRP (FCC §24.235) for mobile / portable stations the maximum antenna gain is 2.51 dBi, which is lower than 9.72 dBi. For mobile and portable stations the antenna gain is limited to 2.51 dBi in accordance with the FCC regulations.

Final Report on Cinterion Wireless Module PHS8-P HW: B1 SW: Revision 02.002 MDE_CINTE_1108_FCCd acc. Title 47 CFR chapter I part 22 subpart H Report Reference: December 01, 2011 Date: Test Laboratory: 7Layers AG Borsigstr. 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7Layers AG Aufsichtsratsvorsitzender Registergericht registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Markus Becker USt-IdNr VAT No.: Phone: +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7Layers.com Reference: MDE_CINTE_1108_FCCd acc. Title 47 CFR chapter I part 22 subpart H 2.2Detailed Description of OUT Samples Sample : C01 OUT Identifier PHS8-P Sample Description Sample #03 HW Status B1 SW Status Revision 02.000 Date of Receipt 2011/10/10 Low VoltageLow Temp. 3.3 V-10 °C High Temp.High Voltage 4.2 V+55 °C Normal Temp.Nominal Voltage 4.2 V+20 °C Parameter List: ValueParameter Description Parameter for Scope FCC_v2 IMEI004401080650142 Sample : F03 OUT Identifier PHS8-P Sample Description Sample #06 HW Status B1 SW Status Revision 02.002 Date of Receipt 2011/11/24 Low VoltageLow Temp. 3.3 V-10 °C High Temp.High Voltage 4.2 V+55 °C Normal Temp.Nominal Voltage 4.2 V+20 °C Parameter List: ValueParameter Description Parameter for Scope FCC_v2 IMEI004401080662097 Page 4 of 154 Reference: MDE_CINTE_1108_FCCd acc. Title 47 CFR chapter I part 22 subpart H 2.3OUT Features Features for OUT:PHS8-P Allowed ValuesDesignationDescriptionSupported Value(s) Features for scope: FCC_v2 AC The OUT is powered by or connected to AC Mains DC The OUT is powered by or connected to DC Mains EDGE850 EUT supports EDGE in the band 824 MHz - 849 MHz EDGE1900 EUT supports EDGE in the band 1850 MHz - 1910 MHz FDD2 EUT supports UMTS FDD2 in the band 1850 MHz - 1910 MHz FDD5 EUT supports UMTS FDD5 in the band 824 MHz - 849 MHz GSM850EUT supports GSM850 band 824MHz - 849MHz HSDPA- FDD2 EUT supports UMTS FDD2 HSDPA in the band 1850 MHz - 1910 MHz HSDPA- FDD5 EUT supports UMTS FDD5 HSDPA in the band 824 MHz - 849 MHz HSUPA- FDD2 EUT supports UMTS FDD2 HSUPA in the band 1850 MHz - 1910 MHz HSUPA- FDD5 EUT supports UMTS FDD5 HSUPA in the band 824 MHz - 849 MHz PantC permanent fixed antenna connector, which may be built-in, designed as an indispensable part of the equipment PCS1900 EUT supports PCS1900 band 1850MHz - 1910MHz 2.4Auxiliary Equipment AE No.Serial No.SW StatusHW StatusDescriptionType Designation AE 02----Flex cable AE Ant1---- GSM/UMTS antenna AE 04----Shielded housing AE Ant2----UMTS antenna AE Ant3 ANN-MS-0-005 M827B 601657--GPS antenna AE 01DSB75_B1.1_0152---Evaluation board Page 5 of 154 Reference: MDE_CINTE_1108_FCCd acc. Title 47 CFR chapter I part 22 subpart H 2.5Setups used for Testing For each setup a relation is given to determine if and which samples and auxiliary equipment is used. The left side list all OUT samples and the right side lists all auxiliary equipment for the given setup. Sample No.Sample DescriptionAE No.AE Description Setup No.List of OUT samplesList of auxiliary equipment C01_cond (Sample #03) AE 02Flex cableC01Sample #03 Sample: AE 01Evaluation board C01_rad (Sample #03) AE 02Flex cableC01Sample #03 Sample: AE Ant1GSM/UMTS antenna AE 04Shielded housing AE Ant2UMTS antenna AE Ant3GPS antenna AE 01Evaluation board F03_cond (Sample #06) AE 02Flex cableF03Sample #06 Sample: AE 01Evaluation board 3Results 3.1General Available at the test laboratory. The results of the inspection are described on the following pages, where 'Conformity' or 'Passed' means that the certification criteria were verified and that the tested device is conform to the applied standard. In cases where 'Declaration' is printed, the required documents are available in the manufacturers product documentation. In cases where 'not applicable' is printed, the test case requirements are not relevant to the specific equipment implementation. Documentation of tested devices: Interpretation of the test results: This Test Report replaces the Test Report MDE_CINTE_1108_FCCb. Note: 3.2List of the Applicable Body (Body for Scope: FCC_v2) DesignationDescription Part 22, Subpart H - Cellular Radiotelephone Service FCC47CFRChIPART22PUBLIC MOBILE SERVICES Page 6 of 154 Reference: MDE_CINTE_1108_FCCd acc. Title 47 CFR chapter I part 22 subpart H 3.3List of Test Specification Test Specification: FCC part 2 and 22 Version10-1-10 Edition Title:PART 2 - GENERAL RULES AND REGULATIONS PART 22 - PUBLIC MOBILE SERVICES Page 7 of 154 Reference: MDE_CINTE_1108_FCCd acc. Title 47 CFR chapter I part 22 subpart H 3.4Summary Test Case Identifier / Name SetupDate of TestResultTest (condition)Ref. Lab 22.1 RF Power Output §2.1046, §22.913 22.1; Frequency Band = 850, Mode = EDGE, Channel = 128, Frequency = 824.2MHz, Method = conducted 2011/12/01F03_condLab 2Passed 22.1; Frequency Band = 850, Mode = EDGE, Channel = 190, Frequency = 836.6MHz, Method = conducted 2011/12/01F03_condLab 2Passed 22.1; Frequency Band = 850, Mode = EDGE, Channel = 251, Frequency = 848.8MHz, Method = conducted 2011/12/01F03_condLab 2Passed 22.1; Frequency Band = 850, Mode = GSM, Channel = 128, Frequency = 824.2MHz, Method = conducted 2011/12/01F03_condLab 2Passed 22.1; Frequency Band = 850, Mode = GSM, Channel = 190, Frequency = 836.6MHz, Method = conducted 2011/12/01F03_condLab 2Passed 22.1; Frequency Band = 850, Mode = GSM, Channel = 251, Frequency = 848.8MHz, Method = conducted 2011/12/01F03_condLab 2Passed 22.1; Frequency Band = FDD5, Mode = HSDPA_subtest_1, Channel = 4132, Frequency = 826.4MHz, Method = conducted 2011/12/01F03_condLab 2Passed 22.1; Frequency Band = FDD5, Mode = HSDPA_subtest_1, Channel = 4183, Frequency = 836.6MHz, Method = conducted 2011/12/01F03_condLab 2Passed 22.1; Frequency Band = FDD5, Mod…

Text truncated - open the document above for the full version.

Final Report on Cinterion Wireless Module PHS8-P HW: B1 SW: Revision 02.002 MDE_CINTE_1108_FCCe acc. Title 47 CFR chapter I part 24 subpart E Report Reference: December 01, 2011 Date: Test Laboratory: 7Layers AG Borsigstr. 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7Layers AG Aufsichtsratsvorsitzender Registergericht registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Markus Becker USt-IdNr VAT No.: Phone: +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7Layers.com Reference: MDE_CINTE_1108_FCCe acc. Title 47 CFR chapter I part 24 subpart E 2.2Detailed Description of OUT Samples Sample : C01 OUT Identifier PHS8-P Sample Description Sample #03 HW Status B1 SW Status Revision 02.000 Date of Receipt 2011/10/10 Low VoltageLow Temp. 3.3 V-10 °C High Temp.High Voltage 4.2 V+55 °C Normal Temp.Nominal Voltage 4.2 V+20 °C Parameter List: ValueParameter Description Parameter for Scope FCC_v2 IMEI004401080650142 Sample : F03 OUT Identifier PHS8-P Sample Description Sample #06 HW Status B1 SW Status Revision 02.002 Date of Receipt 2011/11/24 Low VoltageLow Temp. 3.3 V-10 °C High Temp.High Voltage 4.2 V+55 °C Normal Temp.Nominal Voltage 4.2 V+20 °C Parameter List: ValueParameter Description Parameter for Scope FCC_v2 IMEI004401080662097 Page 4 of 159 Reference: MDE_CINTE_1108_FCCe acc. Title 47 CFR chapter I part 24 subpart E 2.3OUT Features Features for OUT:PHS8-P Allowed ValuesDesignationDescriptionSupported Value(s) Features for scope: FCC_v2 AC The OUT is powered by or connected to AC Mains DC The OUT is powered by or connected to DC Mains EDGE850 EUT supports EDGE in the band 824 MHz - 849 MHz EDGE1900 EUT supports EDGE in the band 1850 MHz - 1910 MHz FDD2 EUT supports UMTS FDD2 in the band 1850 MHz - 1910 MHz FDD5 EUT supports UMTS FDD5 in the band 824 MHz - 849 MHz GSM850EUT supports GSM850 band 824MHz - 849MHz HSDPA- FDD2 EUT supports UMTS FDD2 HSDPA in the band 1850 MHz - 1910 MHz HSDPA- FDD5 EUT supports UMTS FDD5 HSDPA in the band 824 MHz - 849 MHz HSUPA- FDD2 EUT supports UMTS FDD2 HSUPA in the band 1850 MHz - 1910 MHz HSUPA- FDD5 EUT supports UMTS FDD5 HSUPA in the band 824 MHz - 849 MHz PantC permanent fixed antenna connector, which may be built-in, designed as an indispensable part of the equipment PCS1900 EUT supports PCS1900 band 1850MHz - 1910MHz 2.4Auxiliary Equipment AE No.Serial No.SW StatusHW StatusDescriptionType Designation AE 02----Flex cable AE Ant1---- GSM/UMTS antenna AE 04----Shielded housing AE Ant2----UMTS antenna AE Ant3 ANN-MS-0-005 M827B 601657--GPS antenna AE 01DSB75_B1.1_0152---Evaluation board Page 5 of 159 Reference: MDE_CINTE_1108_FCCe acc. Title 47 CFR chapter I part 24 subpart E 2.5Setups used for Testing For each setup a relation is given to determine if and which samples and auxiliary equipment is used. The left side list all OUT samples and the right side lists all auxiliary equipment for the given setup. Sample No.Sample DescriptionAE No.AE Description Setup No.List of OUT samplesList of auxiliary equipment C01_cond (Sample #03) AE 02Flex cableC01Sample #03 Sample: AE 01Evaluation board C01_rad (Sample #03) AE 02Flex cableC01Sample #03 Sample: AE Ant1GSM/UMTS antenna AE 04Shielded housing AE Ant2UMTS antenna AE Ant3GPS antenna AE 01Evaluation board F03_cond (Sample #06) AE 02Flex cableF03Sample #06 Sample: AE 01Evaluation board 3Results 3.1General Available at the test laboratory. The results of the inspection are described on the following pages, where 'Conformity' or 'Passed' means that the certification criteria were verified and that the tested device is conform to the applied standard. In cases where 'Declaration' is printed, the required documents are available in the manufacturers product documentation. In cases where 'not applicable' is printed, the test case requirements are not relevant to the specific equipment implementation. Documentation of tested devices: Interpretation of the test results: This Test Report replaces the Test Report MDE_CINTE_1108_FCCc. Note: 3.2List of the Applicable Body (Body for Scope: FCC_v2) DesignationDescription Part 24, Subpart E - Broadband PCS FCC47CFRChIPART24PERSONAL COMMUNICATIONS SERVICES Page 6 of 159 Reference: MDE_CINTE_1108_FCCe acc. Title 47 CFR chapter I part 24 subpart E 3.3List of Test Specification Test Specification: FCC part 2 and 24 Version10-1-10 Edition Title:PART 2 - GENERAL RULES AND REGULATIONS PART 24 - PERSONAL COMMUNICATIONS SERVICES Page 7 of 159 Reference: MDE_CINTE_1108_FCCe acc. Title 47 CFR chapter I part 24 subpart E 3.4Summary Test Case Identifier / Name SetupDate of TestResultTest (condition)Ref. Lab 24.1 RF Power Output §2.1046, §24.232 24.1; Frequency Band = 1900, Mode = EDGE, Channel = 512, Frequency = 1850.2MHz, Method = conducted 2011/12/01F03_condLab 2Passed 24.1; Frequency Band = 1900, Mode = EDGE, Channel = 661, Frequency = 1880.0MHz, Method = conducted 2011/12/01F03_condLab 2Passed 24.1; Frequency Band = 1900, Mode = EDGE, Channel = 810, Frequency = 1909.8MHz, Method = conducted 2011/12/01F03_condLab 2Passed 24.1; Frequency Band = 1900, Mode = GSM, Channel = 512, Frequency = 1850.2MHz, Method = conducted 2011/12/01F03_condLab 2Passed 24.1; Frequency Band = 1900, Mode = GSM, Channel = 661, Frequency = 1880.0MHz, Method = conducted 2011/12/01F03_condLab 2Passed 24.1; Frequency Band = 1900, Mode = GSM, Channel = 810, Frequency = 1909.8MHz, Method = conducted 2011/12/01F03_condLab 2Passed 24.1; Frequency Band = FDD2, Mode = HSDPA_subtest_1, Channel = 9262, Frequency = 1852.4MHz, Method = conducted 2011/12/01F03_condLab 2Passed 24.1; Frequency Band = FDD2, Mode = HSDPA_subtest_1, Channel = 9400, Frequency = 1880MHz, Method = conducted 2011/12/01F03_condLab 2Passed 24.1; Frequency Ba…

Text truncated - open the document above for the full version.

7 layers AG Aufsichtsratsvorsitzender Registergericht registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Markus Becker USt-IdNr VAT No.: Phone: +49 (0) 2102 749 0 Vorstand Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7Layers.com Assessment Report on GSM: 850/1900 UMTS FDD: Band II/Band V Cinterion Wireless Module PHS8-US Hardware version: B1 Software version: Revision 02.003 (SVN 06) Report Reference: MD…

Text truncated - open the document above for the full version.