QIPPLS83-WModule

Cinterion ® PLS83-W Hardware Interface Overview Version:00.860 DocId:PLS83-W_HIO_v00.860 GENERAL NOTE THE USE OF THE PRODUCT INCLUDING THE SOFTWARE AND DOCUMENTATION (THE "PROD- UCT") IS SUBJECT TO THE RELEASE NOTE PROVIDED TOGETHER WITH PRODUCT. IN ANY EVENT THE PROVISIONS OF THE RELEASE NOTE SHALL PREVAIL. THIS DOCUMENT CONTAINS INFORMATION ON THALES DIS AIS DEUTSCHLAND GMBH (“THALES”) PRODUCTS. THE SPECIFI- CATIONS IN THIS DOCUMENT ARE SUBJECT TO CHANGE AT THALES'S DISCRETION. THALES GRANTS A NON-EXCLUSIVE RIGHT TO USE THE PRODUCT. THE RECIPIENT SHALL NOT TRANS- FER, COPY, MODIFY, TRANSLATE, REVERSE ENGINEER, CREATE DERIVATIVE WORKS; DISAS- SEMBLE OR DECOMPILE THE PRODUCT OR OTHERWISE USE THE PRODUCT EXCEPT AS SPECIFICALLY AUTHORIZED. THE PRODUCT AND THIS DOCUMENT ARE PROVIDED ON AN "AS IS" BASIS ONLY AND MAY CONTAIN DEFICIENCIES OR INADEQUACIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THALES DISCLAIMS ALL WARRANTIES AND LIABILI- TIES. THE RECIPIENT UNDERTAKES FOR AN UNLIMITED PERIOD OF TIME TO OBSERVE SECRECY REGARDING ANY INFORMATION AND DATA PROVIDED TO HIM IN THE CONTEXT OF THE DELIVERY OF THE PRODUCT. THIS GENERAL NOTE SHALL BE GOVERNED AND CON- STRUED ACCORDING TO GERMAN LAW. Copyright Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its con- tents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. Copyright © 2021, THALES DIS AIS Deutschland GmbH Trademark Notice Thales, the Thales logo, are trademarks and service marks of Thales and are registered in certain coun- tries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other registered trademarks or trademarks mentioned in this document are property of their respective owners. tPLS83-W_HIO_v00.8602021-02-18 Confidential / Preliminary Cinterion ® PLS83-W Hardware Interface Overview 2 Page 2 of 61 Document Name: Cinterion ® PLS83-W Hardware Interface Overview Version: 00.860 Date: 2021-02-18 DocId: PLS83-W_HIO_v00.860 Status Confidential / Preliminary Cinterion ® PLS83-W Hardware Interface Overview Contents 61 tPLS83-W_HIO_v00.8602021-02-18 Confidential / Preliminary Page 3 of 61 Contents 1Introduction ................................................................................................................. 7 1.1Product Variants ................................................................................................ 7 1.2Key Features at a Glance .................................................................................. 7 1.3PLS83-W System Overview............................................................................. 11 2Interface Characteristics .......................................................................................... 12 2.1Application Interface ........................................................................................ 12 2.1.1USB Interface...................................................................................... 12 2.1.2Serial Interface ASC0 ......................................................................... 13 2.1.3Serial Interface ASC1 ......................................................................... 14 2.1.4UICC/SIM/USIM Interface ................................................................... 15 2.1.4.1SIM_SWITCH Line .............................................................. 17 2.1.5GPIO Interface .................................................................................... 18 2.1.6Digital Audio Interface ......................................................................... 18 2.1.6.1Pulse Code Modulation Interface ........................................ 18 2.1.6.2Inter-IC Sound Interface (TBD) ........................................... 19 2.1.7Control Signals.................................................................................... 20 2.1.7.1Status LED .......................................................................... 20 2.1.7.2Power Indication.................................................................. 21 2.2RF Antenna Interface ....................................................................................... 22 2.2.1Antenna Installation ............................................................................ 23 2.2.2RF Line Routing Design ...................................................................... 24 2.2.2.1Line Arrangement Examples ............................................... 24 2.2.2.2Routing Example ................................................................. 29 2.3GNSS Antenna Interface ................................................................................. 30 2.3.1GNSS Antenna Diagnostic.................................................................. 31 3Operating Characteristics ........................................................................................ 32 3.1Power Supply ................................................................................................... 32 4Mechanical Dimensions, Mounting and Packaging ............................................... 33 4.1Mechanical Dimensions of PLS83-W............................................................... 33 5Regulatory and Type Approval Information ........................................................... 37 5.1Directives and Standards ................................................................................. 37 5.2SAR requirements specific to portable mobiles ............................................... 40 5.3Reference Equipment for Type Approval ......................................................... 41 5.4Compliance with FCC/IC/ISED Rules and Regulations ................................... 42 6Document Information.....…

Text truncated - open the document above for the full version.

THALES DIS AIS Deutschland GmbH Registered Office: Mü nchen - Amtsgericht Mü nchen, HRB 172715 WEEE-Reg.-Nr. DE 58893809 Managing Director: Andreas Haegele THALES DIS AIS Deutschland GmbH  Siemensdamm 50  13629 Berlin  Germany Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia MD 21046 USA THALES DIS AIS Deutschland GmbH Siemensdamm 50 13629 Berlin Germany Contact person: Axel Heike E-mail: [email protected] Tel: +49 30 31102-8146 13 November 2020 LONG-TERM CONFIDENTIALITY REQUEST TO WHOM lT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission‘s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, THALES DIS AIS Deutschland GmbH requests confidentiality for the following product: FCC ID Number Product Title/Model QIPPLS83-W PLS83-W For the product stated above, we request that the following information be held confidential: 1. Block Diagram 2. Schematic Diagram 3. Part List / Tune Up Procedure 4. Operational Description These items contain detailed system and equipment description and related information about the product which THALES DIS AIS Deutschland GmbH considers to be proprietary, confidential and a custom design which otherwise would only be released to qualified tech and is not released to the general public. Since this design is a basis from which future technological product will evolve, THALES DIS AIS Deutschland GmbH also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. Sincerely, 05.01.2021 X HEIKE Axel Certification Project Manager Signed by: HEIKE Axel 05/01/2021 X Leandro Wan-Dall Head of Certification Management Signed by: WAN-DALL Leandro

THALES DIS AIS Deutschland GmbH Registered Office: Mü nchen - Amtsgericht Mü nchen, HRB 172715 WEEE-Reg.-Nr. DE 58893809 Managing Director: Andreas Haegele THALES DIS AIS Deutschland GmbH  Siemensdamm 50  13629 Berlin  Germany Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia MD 21046 USA THALES DIS AIS Deutschland GmbH Siemensdamm 50 13629 Berlin Germany Contact person: Axel Heike E-mail: [email protected] Tel: +49 30 31102-8146 09 November 2020 Ref: Agent letter for FCC ID: QIPPLS83-W We, THALES DIS AIS Deutschland GmbH Siemensdamm 50 13629 Berlin — Germany hereby authorize Shenzhen UnionTrust Quality and Technology Co., Ltd. Add: 161F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Billy Li Tel: +86-755-28230888 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. The present authorization considers the development of documents on behalf of the client, written under his own letterhead and related to the necessary information to be provided on his behalf to complete the certification process. We declare that our authorized agent is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by our authorized agent on our behalf shall have the same effect as acts of our own. This agreement expires one year from the current date. Sincerely, 12.11.2020 X Axel Heike Certification Project Manager Signed by: HEIKE Axel 09/11/2020 X Leandro Wan-Dall Head of Certification Management Signed by: WAN-DALL Leandro

THALES DIS AIS Deutschland GmbH Registered Office: Mü nchen - Amtsgericht Mü nchen, HRB 172715 WEEE-Reg.-Nr. DE 58893809 Managing Director: Andreas Haegele THALES DIS AIS Deutschland GmbH  Siemensdamm 50  13629 Berlin  Germany Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia MD 21046 USA THALES DIS AIS Deutschland GmbH Siemensdamm 50 13629 Berlin Germany Contact person: Axel Heike E-mail: [email protected] Tel: +49 30 31102-8146 09 November 2020 Ref: FCC Modular approval letter for FCC ID: QIPPLS83-W TO WHOM lT MAY CONCERN The following attestation addresses the requirements to support modular approval pursuant to §15.212 of the Commission‘s Rules: Modular approval requirement Yes No* (i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. X (ii) The modular transmitter must have buffered modulation/data inputs (if such in- puts are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. X (iii) The modular transmitter must have its own power supply regulation. X (iv) The modular transmitter must comply with the antenna and transmission system requirements of §1 5.203, 1 5.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections be- tween the module and the antenna, including the cable). The “professional installa- tion” provision of §1 5.203 is not applicable to modules but can apply to limited mod- ular approvals under paragraph (b) of this section. X (v) The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in §1 5.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see §15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 cen- timeters to insure that there is no coupling between the case of the module and sup- porting equipment. Any accessories, peripherals, or support equipment connected to X the module during testing shall be unmodified and commercially available (see §15.31(i)). (vi) The modular transmitter must be equipped with either a permanently affixed la- bel or must be capable of electronically displaying its FCC identification number. X (vii) The modular transmitter must comply with any specific rules or operating re- quirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such re- quirements. A copy of these instructions must be included in the application for equipment authorization. X (viii) The modular transmitter must comply with any applicable RF exposure require- ments in its final configuration. X * Shall provide a detailed explanation if the answer is “No”. If you have any questions, please feel free to contact us at the address shown above. Sincerely, 12.11.2020 X Axel Heike Certification Project Manager Signed by: HEIKE Axel 09/11/2020 X Leandro Wan-Dall Head of Certification Management Signed by: WAN-DALL Leandro

THALES DIS AIS Deutschland GmbH Registered Office: Mü nchen - Amtsgericht Mü nchen, HRB 172715 WEEE-Reg.-Nr. DE 58893809 Managing Director: Andreas Haegele THALES DIS AIS Deutschland GmbH  Siemensdamm 50  13629 Berlin  Germany Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia MD 21046 USA THALES DIS AIS Deutschland GmbH Siemensdamm 50 13629 Berlin Germany Contact person: Axel Heike E-mail: [email protected] Tel: +49 30 31102-8146 09 November 2020 SHORT-TERM CONFIDENTIALITY REQUEST TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission‘s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, THALES DIS AIS Deutschland GmbH requests confidentiality for the following product: FCC ID Number Product Title/Model QIPPLS83-W PLS83-W For the product stated above, we request that the following information be held confidential: 1. Test Setup Photos 2. User Manual 3. External and Internal Photographs THALES DIS AIS Deutschland GmbH requests this confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device, which is planned tor 30 th of April 2021. If you have any questions, please feel free to contact us at the address shown above. Sincerely, 05.01.2021 X Axel Heike Certification Project Manager Signed by: HEIKE Axel 05/01/2021 X Leandro Wan-Dall Head of Certification Management Signed by: WAN-DALL Leandro

Page 1 of 1 FCC ID: QIPPLS83-W IC: 7830A-PLS83W Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT EXTERNAL PHOTOS EUT Photo EUT Photo

Label Location

Page 1 of 1 FCC ID: QIPPLS83-W IC: 7830A-PLS83W Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT INTERNAL PHOTOS EUT Photo EUT Photo

Page 2 of 18 Report No.: 200722013RFC-1R1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.1 Version Version No. Date Description V1.0 January 6, 2021 Original(Report No. : 200722013RFC-1) V1.1 February 19, 2021 Update template Note: This report will supersede the original report no.:200722013RFC-1 dated January 6, 2021. Page 3 of 18 Report No.: 200722013RFC-1R1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.1 CONTENTS 1. Test Laboratory ................................................................................................................................................ 4 2. Client Information ............................................................................................................................................ 5 2.1. Applicant Information ............................................................................................................. 5 2.2. Manufacturer Information ....................................................................................................... 5 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) ..................................................................... 6 3.1. About EUT ............................................................................................................................... 6 4. Power Output Test Results ............................................................................................................................... 7 4.1. RF Power Output ..................................................................................................................... 7 4.2. Duty cycle ................................................................................................................................ 7 5. Reference Documents for FCC ........................................................................................................................ 8 5.1. Applicable Standards ............................................................................................................. 8 5.2. Test Limits ............................................................................................................................... 8 5.3. Calculation Information .......................................................................................................... 9 5.4. Max. Antenna gain calculations ........................................................................................... 10 5.5. Conclusion for maximum admissible antenna gain (FCC) ................................................. 12 6. Reference Documents for IC .......................................................................................................................... 13 6.1. Applicable Standards ........................................................................................................... 13 6.2. Test Limits ............................................................................................................................. 13 6.3. Calculation Information ........................................................................................................ 14 6.4. Max. Antenna gain calculations ........................................................................................... 14 6.5. Conclusion for maximum admissible antenna gain (IC) .................................................... 16 7. Summary .......................................................................................................................................................... 17 Page 4 of 18 Report No.: 200722013RFC-1R1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.1 1. Test Laboratory Company Name: Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China 518109 Postal Code: 518109 Telephone: +86 (0) 755 2823 0888 Fax: +86 (0) 755 2823 0886 Page 5 of 18 Report No.: 200722013RFC-1R1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.1 2. Client Information 2.1. Applicant Information Company Name: Thales DIS AIS Deutschland GmbH Address /Post: Siemensdamm 50, 13629 Berlin, Germany Telephone: / Postcode: / 2.2. Manufacturer Information Company Name: Thales DIS AIS Deutschland GmbH Address /Post: Werinherstr.81, 81541 Munich, Germany Telephone: / Postcode: / Page 6 of 18 Report No.: 200722013RFC-1R1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.1 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT EUT Description Module Model name PLS83-W GSM Bands GSM850/1900 UTRA Bands Band II/ Band IV/ Band V E-UTRA Bands FDD Band 2/ Band 4/ Band 5/ Band 7/ Band 12/ Band 13/ Band 26/ Band 66 TDD Band 38/ Band 41 Antenna Type External Antenna FCC ID: QIPPLS83-W IC: 7830A…

Text truncated - open the document above for the full version.

Page 2 of 47 Report No.: 200722013RFM-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCC23G-V1.0 Version Version No. Date Description V1.0 January 6, 2021 Original Page 3 of 47 Report No.: 200722013RFM-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCC23G-V1.0 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.2.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 4 1.2.2 DESCRIPTION OF ACCESSORIES .............................................................................................................. 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 4 1.4 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................... 5 1.5 TEST LOCATION ................................................................................................................................................. 5 1.6 TEST FACILITY ................................................................................................................................................... 5 1.7 DEVIATION FROM STANDARDS ............................................................................................................................ 6 1.8 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 6 1.9 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 6 1.10 MEASUREMENT UNCERTAINTY ........................................................................................................................... 6 2. TEST SUMMARY ...................................................................................................................................................... 7 3. EQUIPMENT LIST .................................................................................................................................................... 9 4. TEST CONFIGURATION ........................................................................................................................................ 10 4.1 ENVIRONMENTAL CONDITIONS FOR TESTING ...................................................................................................... 10 4.2 TEST SETUP .................................................................................................................................................... 11 4.2.1 FOR RADIATED EMISSIONS TEST SETUP ................................................................................................ 11 4.2.2 FOR CONDUCTED RF TEST SETUP ........................................................................................................ 12 4.3 TEST CHANNELS ............................................................................................................................................. 13 4.4 SYSTEM TEST CONFIGURATION ........................................................................................................................ 14 4.5 PRE-SCAN ....................................................................................................................................................... 14 5. RADIO TECHNICAL REQUIREMENTS SPECIFICATION .................................................................................... 17 5.1 REFERENCE DOCUMENTS FOR TESTING ............................................................................................................ 17 5.2 MAXIMUM ERP/EIRP ...................................................................................................................................... 17 5.3 CONDUCTED OUTPUT POWER .......................................................................................................................... 19 5.4 PEAK-TO-AVERAGE RATIO ................................................................................................................................ 20 5.5 99%&26DB BANDWIDTH ................................................................................................................................. 25 5.6 BAND EDGE AT ANTENNA TERMINALS ............................................................................................................... 30 5.7 SPURIOUS EMISSIONS AT ANTENNA TERMINALS ................................................................................................. 34 5.8 FIELD STRENGTH OF SPURIOUS RADIATION ........................................................................................................ 39 5.9 FREQUENCY STABILITY .................................................................................................................................... 44 APPENDIX 1 PHOTOS OF TEST SETUP ..................................................................................................................... 47 APPENDIX 2 P…

Text truncated - open the document above for the full version.

Page 27 of 47 Report No.: 200722013RFM-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCC23G-V1.0 PCS 1900 GSM EDGE Lowest Channel Middle Channel Highest Channel Page 28 of 47 Report No.: 200722013RFM-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCC23G-V1.0 WCDMA Band II_RMC 12.2kbps WCDMA Band IV_RMC 12.2kbps Lowest Channel Middle Channel Highest Channel Page 29 of 47 Report No.: 200722013RFM-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCC23G-V1.0 WCDMA Band V_RMC 12.2kbps Lowest Channel Middle Channel Highest Channel Page 30 of 47 Report No.: 200722013RFM-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCC23G-V1.0 5.6 BAND EDGE AT ANTENNA TERMINALS Test Requirement: FCC 47 CFR Part 2.1051, FCC 47 CFR Part 22.917(a), FCC 47 CFR Part 24.238(a), FCC 47 CFR Part 27.53(h)(1), RSS-132 Issue 3, Section 5.5, RSS-133 Issue 6, Section 6.5, RSS-139 Issue 3, Section 6.6 Test Method: ANSI C63.26-2015 & KDB 971168 D01v03r01 Limit: FCC 47 CFR Part 22.917(a), FCC 47 CFR Part 24.238(a), FCC 47 CFR Part 27.53(h)(1), The power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. The emission limit equal to -13 dBm. RSS-132 Issue 3, Section 5.5, In the first 1.0 MHz band immediately outside and adjacent to each of the sub-bands specified in Section 5.1, the power of emissions per any 1% of t…

Text truncated - open the document above for the full version.