QQFPBTOIDX2C2XBluetooth Headset

Confidential This document contains confidential information, trade secrets, and copyrighted expressions that are the property of Windigo Systems. 2210 O’Toole Ave #200, San Jose, CA95131 Tel: 408.576.1770 Fax: 408.576.1790. Any disclosure, reproduction, sale or license of all or any part of the information or expression contained in this document is prohibited by California law and the United States copyright law, and may be subject to criminal penalties. If you are not an employee of the Windigo Systems, or otherwise authorized in writing by Windigo Systems to possess this document, please contact Windigo Systems immediately at the address above. OLED Headset User guide Author: Justin SH CHEN Last updated: Document History Date Author Summary of change Note 01/17/05 Justin SH CHEN Initial Version 01/18/05 Justin SH CHEN Add the pictures to illustrate OLED headset operation 01/19/05 Justin SH CHEN Correct the mark in the OLED 01/25/05 Thompson Tang User Guide Reviewing 04/02/05 Justin SH CHEN Change the view phonebook function 04/04/05 Justin SH CHEN Update the view phone book function 04/13/05 Justin SH CHEN Added the notice part 04/14/05 Justin SH CHEN Added the tips for browse cell phone’s phone book Confidential This document contains confidential information, trade secrets, and copyrighted expressions that are the property of Windigo Systems. 2210 O’Toole Ave #200, San Jose, CA95131 Tel: 408.576.1770 Fax: 408.576.1790. Any disclosure, reproduction, sale or license of all or any part of the information or expression contained in this document is prohibited by California law and the United States copyright law, and may be subject to criminal penalties. If you are not an employee of the Windigo Systems, or otherwise authorized in writing by Windigo Systems to possess this document, please contact Windigo Systems immediately at the address above. Note This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Notice: Any changes or modification not expressly approved by the party responsible could void the user's authority to operate the device. Confidential This document contains confidential information, trade secrets, and copyrighted expressions that are the property of Windigo Systems. 2210 O’Toole Ave #200, San Jose, CA95131 Tel: 408.576.1770 Fax: 408.576.1790. Any disclosure, reproduction, sale or license of all or any part of the information or expression contained in this document is prohibited by California law and the United States copyright law, and may be subject to criminal penalties. If you are not an employee of the Windigo Systems, or otherwise authorized in writing by Windigo Systems to possess this document, please contact Windigo Systems immediately at the address above. OLED headset Fig 1 Charging OLED headset Before using the OLED headset, you must charge the headset for a minimum of two hours. When fully charged, the battery provides up to 5 hours of talk time and up to 120 hours of standby time. To charge the headset 1. Plug the AC adapter connector into the AC jack on the ear hook. The Amber LED on the ear hook will be illuminated when the headset is charging, 2. After charging is finished, the Amber LED will be off. Unplug the AC adapter connector from the AC jack. Battery Status indication: The charging LED on the ear hook will remain illuminated whilst the headset battery is charging. When the battery is fully charged, Amber LED will be off and the battery icon on the display screen will show full battery indication. Confidential This document contains confidential information, trade secrets, and copyrighted expressions that are the property of Windigo Systems. 2210 O’Toole Ave #200, San Jose, CA95131 Tel: 408.576.1770 Fax: 408.576.1790. Any disclosure, reproduction, sale or license of all or any part of the information or expression contained in this document is prohibited by California law and the United States copyright law, and may be subject to criminal penalties. If you are not an employee of the Windigo Systems, or otherwise authorized in writing by Windigo Systems to possess this document, please contact Windigo Systems immediately at the address above. Powering OLED Headset To turn on the headset Press and hold the Talk button for 4 seconds. The “On...” will be displayed on the screen and you will hear a tone. The headset will then be placed in “Standby” mode and it will be ready to make and receive calls. To turn off the headset When the headset is on, press and hold the Talk button for 4 seconds. The “Off...” will be displayed on the screen, and you will hear the tone. The headset will then be switched off. Pairing OLED headset to your mobile phone Pairing is the process of linking the headset with your Bluetooth mobile phone. Before you use the OLED headset with your mobile phone, you must pair both devices. After pairing is completed, you can use the headset only with the paired mobile phone. If you wish to use the headset with a different mobile phone, you must redo the pairing process with the new mobile phone. In this case, the headset will no longer work with the previous mobile phone. Before you commence pairing the headset, ensure that the battery is fully charged. To pair the device 1. With the headset turned off, press and hold the TALK button for 5 seconds. “Pairing...” will be show on the screen, and you will hear a tone. 2. Release the TALK button. The headset is now in Pairing Mode. 3. Turn on the mobile phone and place i…

Text truncated - open the document above for the full version.

Report No: ER/2005/30041 ID: QQFPBTOIDX2C2X Issue Date: Jun. 14, 2005 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA APPENDIX 2 EXTERNAL OF EUT Report No: ER/2005/30041 ID: QQFPBTOIDX2C2X Issue Date: Jun. 14, 2005 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA All View of EUT Adaptor Report No: ER/2005/30041 ID: QQFPBTOIDX2C2X Issue Date: Jun. 14, 2005 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA Front View of EUT Front View of EUT Report No: ER/2005/30041 ID: QQFPBTOIDX2C2X Issue Date: Jun. 14, 2005 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA Back View of EUT

FCC ID LABEL FORMAT AND LOCATION Applicant: Windigo SYSTEMS FCC ID: QQFPBTOIDX2C2X FCC ID: QQFPBTOIDX2C2X This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID LABEL AREA

Report No: ER/2005/30041 ID: QQFPBTOIDX2C2X Issue Date: Jun. 14, 2005 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA APPENDIX 3 INTERNAL OF EUT Report No: ER/2005/30041 ID: QQFPBTOIDX2C2X Issue Date: Jun. 14, 2005 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA Open View of EUT Internal View of EUT – 1 Antenna Report No: ER/2005/30041 ID: QQFPBTOIDX2C2X Issue Date: Jun. 14, 2005 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA Internal View of EUT – 2

Report No: ER/2005/30041 ID: QQFPBTOIDX2C2X Issue Date: Jun. 14, 2005 Page: 1 of 54 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Product Name: OLED Bluetooth Headset Brand Name: (1) Windigo (for model: PBTOIDF2C2-X (X=0~9, A~Z), PBTOIDYZC2-X (X=0~9 or A~Z; Y=A~Z; Z=0~9)); (2) V THREE (for model: BTH7, BTH8); (3) Tekkeon ezTalker digital (for model: ET3000); (4) MAXCALL (for model: KBH010N-10) Model Name: PBTOIDF2C2-X (X=0~9, A~Z), PBTOIDYZC2-X (X=0~9 or A~Z; Y=A~Z; Z=0~9), BTH7, BTH8, ET3000, KBH010N-10 Model Difference: These models are different in exterior looks. The variant model names depend on different trader in the market FCC ID: QQFPBTOIDX2C2X Report No.: ER/2005/30041 Issue Date: Jun. 14, 2005 FCC Rule Part: §15.247 Prepared for Windigo SYSTEMS 2210 O’Toole Ave. #200, San Jose, CA 95131, U.S.A. Prepared by SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei County, Taiwan. Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This document may be altered or revised by SGS Taiwan Ltd. personnel only, and shall be noted in the revision section of the document. Report No: ER/2005/30041 ID: QQFPBTOIDX2C2X Issue Date: Jun. 14, 2005 Page: 2 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA VERIFICATION OF COMPLIANCE Applicant: Windigo SYSTEMS 2210 O’Toole Ave. #200, San Jose, CA 95131, U.S.A. Equipment Under Test: OLED Bluetooth Headset Brand Name: (1) Windigo (for model: PBTOIDF2C2-X (X=0~9, A~Z), PBTOIDYZC2-X (X=0~9 or A~Z; Y=A~Z; Z=0~9)); (2) V THREE (for model: BTH7, BTH8); (3) Tekkeon ezTalker digital (for model: ET3000); (4) MAXCALL (for model: KBH010N-10) FCC ID Number: QQFPBTOIDX2C2X Model No.: PBTOIDF2C2-X (X=0~9, A~Z), PBTOIDYZC2-X (X=0~9 or A~Z; Y=A~Z; Z=0~9), BTH7, BTH8, ET3000, KBH010N-10 Model Difference: These models are different in exterior looks. The variant model names depend on differ- ent trader in the market File Number: ER/2005/30041 Date of test: Mar. 25, 2005 ~ Apr. 22, 2005 Date of EUT Received: Mar. 25, 2005 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. The test data, data evaluation, test proce- dures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2003) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247 The test results of this report relate only to the tested sample identified in this report. Test By: Date Jun. 14, 2005 Alex Hsieh Prepared By: Date Jun. 14, 2005 Elisa Chen Approved By: Date Jun. 14, 2005 Vincent Su Report No: ER/2005/30041 ID: QQFPBTOIDX2C2X Issue Date: Jun. 14, 2005 Page: 3 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA Version Version No. Date 00 Jun. 14, 2005 Report No: ER/2005/30041 ID: QQFPBTOIDX2C2X Issue Date: Jun. 14, 2005 Page: 4 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA Table of Contents 1. GENERAL INFORMATION .........................................................................................................7 1.1. Product Description ............................................................................................................................7 1.2. Related Submittal(s) / Grant (s) ..........................................................................................................7 1.3. Test Methodology ...............................................................................................................................7 1.4. Test Facility.........................................................................................................................................7 1.5. Special Accessories .............................................................................................................................7 1.6. Equipment Modifications....................................................................................................................7 2. SYSTEM TEST CONFIGURATION ............................................................................................8 2.1. EUT Configuration .............................................................................................................................8 2.2. EUT Exercise ......................................................................................................................................8 2.3. Test Procedure........................................................................…

Text truncated - open the document above for the full version.

Report No: ER/2005/30041 ID: QQFPBTOIDX2C2X Issue Date: Jun. 14, 2005 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA APPENDIX 1 PHOTOGRPHS OF SET UP Report No: ER/2005/30041 ID: QQFPBTOIDX2C2X Issue Date: Jun. 14, 2005 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Radiated Emission Set up Photos Report No: ER/2005/30041 ID: QQFPBTOIDX2C2X Issue Date: Jun. 14, 2005 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 134 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw ILAC MRA Conducted Emission Setup Photos