QT5-RFID4USB Thumb Drive Publishing Robot with RFID

Rimage Simplex® & Prism III/CP User Guide For more information visit www.rimage.com/support 2006037 2026-08-18 Rimage Corporation reserves the right to make improvements to the equipment and software described in this document at any time without any prior notice. Rimage Corporation reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Rimage Corporation to notify any person or organization of such revisions or changes. This document may contain links to web sites that were current at the time of publication, but may have moved or become inactive since. This document may contain links to sites on the Internet that are owned and operated by third parties. Rimage Corporation is not responsible for the content of any such third-party site. © 2026, Rimage Corporation Rimage ®, Everest® and Rimage Simplex® are registered trademarks of the Rimage Corporation. Prism™ is a trademark of the Rimage Corporation. Windows ® is a registered trademark of Microsoft Corporation. All other trademarks and registered trademarks are the property of their respective owners. The most recent version of this document can be found at www.rimage.com/support. Rimage Corporation 4400 West 78th Street Suite 110A Bloomington, MN 55435 USA Toll Free +1.800.445.8288 Rimage EMEA Mainzer Str. 131 65187 Wiesbaden Germany +49 611 92777-0 Rimage Japan Co., Ltd. 9F Toshin-Kuramae Bldg 3-2-2 Kuramae, Taito-ku Tokyo 111-0051 JAPAN Tel +81.3.6452.8780 Rimage Taiwan 8F, No. 367, FuXing North Rd SongShan Dist. Taipei 105401, Taiwan Tel +886.2.2726.0100 Rimage Information Technology (Shanghai) Co., Ltd. Unit E2, 7F, Sino-Ocean Tower 2 No. 618 East YanAn Road Huangpu District Shanghai 200001 CHINA Tel +86.021.5887.8905 Contents 2006037 For more information visit www.rimage.com/support 2026-08-18 Introduction .......................................................................................1 About this User Guide ....................................................................................................1 About the Simplex System ...........................................................................................1 About the Prism III/CP Printer .......................................................................................1 Unpacking and Setup Instructions .............................................................................1 Important Information ....................................................................2 Support Contact Information .......................................................................................2 Learn More Online .........................................................................................................2 Technical Support ..........................................................................................................2 Recording Software Disclaimer ..................................................................................3 Safety and Compliance Information .........................................................................3 Safety Precautions ..............................................................................................................3 Country-specific Cautions and Warnings ...........................................................................3 Important Information .......................................................................................................4 Compliance Information - Simplex .....................................................................................5 Compliance Information - Prism III/CP ...............................................................................6 Prism III/CP Printer Requirements ......................................................................................7 Identify the Parts of the Simplex System ....................................8 Front View ........................................................................................................................8 Back View.........................................................................................................................9 Status Light ....................................................................................................................10 Display Panel ................................................................................................................10 System Button ...............................................................................................................10 Beeper .............................................................................................................................10 Identify the Parts of the Prism III/CP Printer ..............................11 Front View ........................................................................................................................11 Back View.........................................................................................................................11 Operator Panel ..............................................................................................................12 Operator Button .............................................................................................................12 Indicator Lights ...............................................................................................................12 Operate the Simplex System ........................................................13 Power On the Simplex System ..................................................................................13 Power Off the Simplex System ..................................................................................13 Pause the Simplex System .........................................................................................13 Load the Simplex USB modules ................................................................................14 Unload …

Text truncated - open the document above for the full version.

Rimage Corporation 4400 West 78 th Street, Suite 110A Bloomington, MN 55435 USA Tel: 952-683-7900 Rimage is an Equal Opportunity Employer To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-12-2026 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: QT5-RFID4 Rimage Corporation certifies that, as of the date of the filing of the application, TUV SUD America is our designated U.S. agent for service of process for the above referenced FCC ID. Rimage Corporation accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Rimage Corporation accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Rimage Corporation Address: 4400 W 78 th Street Suite 110A, Bloomington, MN 55435 Contact Person: Zahid Taufiq Tel.: 952-683-7881 Email: [email protected] FRN: 0008247025 Sincerely,

Rimage Corporation 4400 West 78 th Street, Suite 110A Bloomington, MN 55435 USA Tel: 952-683-7900 Rimage is an Equal Opportunity Employer Date: 08-12-2026 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d)(5)(i) and Part 2.911(d)(5)(ii) Filing Re. KDB 986446 D01 FCC ID: QT5-RFID4 Dear Sir or Madam, Rimage Corporation certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. We further attest that the equipment for which authorization is sought does not contain, nor will it ever contain, integrated Kaspersky cybersecurity and/or anti-virus software produced by Kaspersky Lab Inc. or any of its successors and assignees. If you have any questions, please contact us. Sincerely, Contact name: Zahid Taufiq Company name: Rimage Corporation Address: 4400 W 78 th Street Suite 110A, Bloomington, MN 55435 E-mail: [email protected] Tel: 952-683-7881

Rimage Corporation 4400 West 78 th Street, Suite 110A Bloomington, MN 55435 USA Tel: 952-683-7900 Rimage is an Equal Opportunity Employer Date: 12/08/2026 TUV SUD America Inc. 401 Edgewater Drive Ste 500 Wakefield MA 01880 Dear Sir or Madam, We, Rimage Corporation, 4400 W 78 th Street Suite 110A, Bloomington, MN 55435, USA, hereby authorize Anes Dahmane of TUV SUD America, 5945 Cabot Parkway,Alpharetta, GA 30005 to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Yours sincerely, Name: Zahid Taufiq Title: Compliance Engineer

Rimage Corporation 4400 West 78 th Street, Suite 110A Bloomington, MN 55435 USA Tel: 952-683-7900 Rimage is an Equal Opportunity Employer Date: 12/08/2026 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Confidentiality Request FCC ID: QT5-RFID4 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, Rimage Corporation hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation Tune Up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Name: Zahid Taufiq Title: Compliance Engineer

SHEET18 OF23 SMPLX_COMPLIANCE.vsdx 2026-08-13 09:28 | P. Salisbury SIMPLEX & PRISMIII/CP COMPLIANCE INFO Exhibit 3: External Photos RIMAGE CORPORATION MINNEAPOLIS, MN U.S.A DRAWING NO.REV 10 - Top Left Right Bottom Front Rear

SHEET17 OF23 SMPLX_COMPLIANCE.vsdx 2026-08-12 18:45 | P. Salisbury SIMPLEX & PRISMIII/CP COMPLIANCE INFO Exhibit 2: RAS39 Label RIMAGE CORPORATION MINNEAPOLIS, MN U.S.A DRAWING NO.REV 10 -

SHEET22 OF23 SMPLX_COMPLIANCE.vsdx 2026-08-12 20:18 | P. Salisbury SIMPLEX & PRISMIII/CP COMPLIANCE INFO Exhibit 9: Internal Photos RIMAGE CORPORATION MINNEAPOLIS, MN U.S.A DRAWING NO.REV 10 -

TÜV SÜD America Inc 141 14 th Street NW New Brighton, MN 55112 Phone: 651-631-2487 www.tuv-sud-america.com TÜV SÜD SIGNATURE NAME JOB TITLE RESPONSIBLE FOR ISSUE DATE Yves-Thierry Jean-Charles Senior Engineer Authorized Signatory 11 July 2026 Signatures in this approval box have checked this document in line with the requirements of TÜV SÜD America, Inc. document control rules. FCC Accreditation Designation Number US1148 New Brighton, MN Test Laboratory Innovation, Science, and Economic Development Canada Accreditation Site Number 4512A New Brighton, MN Test Laboratory Certification Exhibit RF Exposure: FCC 47 CFR Part 2.1091 Rimage Corporation RAS39 FCC ID: QT5-RFID4 IC: 4496A-RFID4 Prepared for: Rimage Corporation 4400 W 78th Street Suite 110A Bloomington, MN 55435 COMMERCIAL-IN-CONFIDENCE Document Number: NC721020809.6 | Issue: 1 Document Number: NC721020809.6 | Issue: 1 COMMERCIAL-IN-CONFIDENCE Page 2 of 7 Contents 1 Report Summary .........................................................................................................................3 1.1 Document Modification Record .....................................................................................................3 1.2 Purpose .........................................................................................................................................3 1.3 General Information.......................................................................................................................3 1.4 Device under Test (DUT) Description ...........................................................................................3 1.5 Technical Information ....................................................................................................................4 2 Evaluation Details .......................................................................................................................5 2.1 Specific Requirements ..................................................................................................................5 2.2 RF Exposure Assessment .............................................................................................................6 3 Conclusion ...................................................................................................................................7 Document Number: NC721020809.6 | Issue: 1 COMMERCIAL-IN-CONFIDENCE Page 3 of 7 1 Report Summary 1.1 Document Modification Record Alterations and Additions of this document will be issued to the holders of each copy in the form of a complete document. Issue Description of Change Date of Issue 1 First Issue 2026-July-11 1.2 Purpose The purpose of the document is to report the RF exposure evaluation of the RAS39 in accordance with FCC 47 CFR Part 2.1091. 1.3 General Information Applicant: Rimage Corporation Device Category: Mobile Environment: General Population/Uncontrolled Exposure Test Specification/Issue/Date: US Code of Federal Regulations (CFR): Title 47, Part 1, Subpart I: Procedures Implementing the National Environmental Policy Act of 1969, 2025. US Code of Federal Regulations (CFR): Title 47, Part 2, Subpart J: Equipment Authorization Procedures, 2025. 1.4 Device under Test (DUT) Description The RAS39 is an automated USB recording and publishing system. The EUT incorporates a 13.56 MHz RFID transceiver based on the STMicroelectronics ST25R3917B IC and a Taoglas FXR.1515.A.DG loop antenna for identification and tracking of consumables using the ISO/IEC 15693 protocol. The EUT contains a previously approved RFID subsystem, Model CDPR6 (FCC ID: QT5-CDPR6). The two radios are not capable of simultaneous transmission. Document Number: NC721020809.6 | Issue: 1 COMMERCIAL-IN-CONFIDENCE Page 4 of 7 1.5 Technical Information FCC ID: QT5-RFID4 ISED Certification Number: 4496A-RFID4 Transmission Protocol: 13.56 MHz RFID Frequency: 13.56 MHz Antenna Type: Flexible PCB loop Antenna Antenna Gain: ------ dBi Maximum Field Strength: 26.98 dBuV/m Measurement Distance: 3 m Exposure Conditions: ≥ 200 mm Document Number: NC721020809.6 | Issue: 1 COMMERCIAL-IN-CONFIDENCE Page 5 of 7 2 Evaluation Details 2.1 Specific Requirements FCC 47 CFR Part 1.1307 Actions that may have a significant environmental effect, for which Environmental Assessments (EAs) must be prepared. 1.1307 (b)(3)Determination of exemption. (i) For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of this section. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold Pth (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by: 푃 푡ℎ = { 퐸푅푃 20 푐푚 ( 푑 20 푐푚) 푥 푑 ≤20 푐푚 퐸푅푃 20 푐푚 20 푐푚<푑 ≤40 푐푚 Where 푥= −푙표푔 10 ( 60 퐸푅푃 20 푐푚 √ 푓 ) 푎푛푑 푓 푖푠 푖푛 퐺퐻푧; And 퐸푅푃 20 푐푚 ( 푚푤 ) = { 2040푓 0.3 퐺퐻푧 ≤푓 <1.5 퐺퐻푧 3060 1.5 퐺퐻푧 ≤푓 <6 퐺퐻푧 푑=푡ℎ푒 푠푒푝푎푟푎푡푖표푛 푑푖푠푡푎푛푐푒 (푐푚) (C) Or using Table 1 and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of…

Text truncated - open the document above for the full version.

TÜV SÜD America Inc 141 14 th Street NW New Brighton, MN 55112 Phone: 651-631-2487 www.tuv-sud-america.com TÜV SÜD SIGNATURE NAME JOB TITLE RESPONSIBLE FOR ISSUE DATE Omar Castillo Senior EMC / Wireless Test Engineer Authorized Signatory August 18, 2026 Signatures in this approval box have checked this document in line with the requirements of TÜV SÜD America, Inc. document control rules. FCC Accreditation Designation Number US1148 New Brighton, MN Test Laboratory Innovation, Science, and Economic Development Canada Accreditation Site Number 4512A New Brighton, MN Test Laboratory EXECUTIVE SUMMARY A sample of this product was tested and found to be compliant with the standards listed above and the tests shown in Table 1.4-1 of this report. A2LA Cert. No. 2955.11 DISCLAIMER AND COPYRIGHT This non-binding report has been prepared by TÜV SÜD America with all reasonable skill and care. The document is confidential to the potential Client and TÜV SÜD America. No part of this document may be reproduced without the prior written approval of TÜV SÜD America. © TÜV SÜD. ACCREDITATION Our A2LA Accreditation does not cover opinions and interpretations and any expressed are outside the scope of our A2LA Accreditation. FCC and ISED Canada Evaluation of the Rimage Corporation RAS39 FCC ID: QT5-RFID4 IC ID: 4496A-RFID4 In accordance with: FCC 47 CFR part 15.225 and ISED Canada’s Radio Standards Specifications RSS-210 Prepared for: Rimage Corporation 4400 W 78 th Street Suite 110A Bloomington, MN 55435 COMMERCIAL-IN-CONFIDENCE Document Number: NC721020809.1 | Issue: 2 Document Number: NC72102809.1 | Issue:2 COMMERCIAL-IN-CONFIDENCE Page 1 of 46 Contents 1 Report Summary .........................................................................................................................2 1.1 Report Modification Record ...........................................................................................................2 1.2 Introduction ....................................................................................................................................2 1.3 Scope of Testing ...........................................................................................................................4 1.4 Summary of Results ......................................................................................................................4 1.5 Product Information .......................................................................................................................5 1.6 Deviations from the Standard ........................................................................................................6 1.7 EUT Modification Record ..............................................................................................................7 1.8 Test Location .................................................................................................................................7 2 Test Details ..................................................................................................................................8 2.1 Antenna Requirements..................................................................................................................8 2.2 20 dB Bandwidth ...........................................................................................................................9 2.3 99% Bandwidth .......................................................................................................................... 12 2.4 Radiated Field Strength of Emissions within the 13.110-14.010 band ...................................... 15 2.5 Radiated Field Strength of Emissions outside of the 13.110-14.010 band ................................ 21 2.6 Power Line Conducted Emissions ............................................................................................. 31 2.7 Frequency Tolerance of Carrier Signal ...................................................................................... 36 3 Test Equipment Information ................................................................................................... 39 3.1 General Test Equipment Used ................................................................................................... 39 4 Diagram of Test Set-ups .......................................................................................................... 40 5 Measurement Uncertainty ....................................................................................................... 45 6 Accreditation, Disclaimers and Copyright............................................................................. 46 Document Number: NC72102809.1 | Issue:2 COMMERCIAL-IN-CONFIDENCE Page 2 of 46 1 Report Summary 1.1 Report Modification Record Alterations and additions to this report will be issued to the holders of each copy in the form of a complete document. Table 1.1-1 – Modification Record Issue Description of Change Date of Issue 1 First Issue 2026-July-28 2 Included the ISED Canada Certification number of the integrated printer. 2026-August-18 1.2 Introduction The purpose of this report is to demonstrate compliance with Part 15 Subpart C of the FCC’s Code of Federal Regulations Section 15.225 and Innovation Science and Economic Development Canada’s Radio Standards Specification RSS-210 for the tests documented herein. Applicant Rimage Corporation Manufacturer Rimage Corporation Applicant’s Email Address [email protected] Model Number(s) RAS39 Serial Number(s) RAS39: 20260101 CDPR6B: 10048931 FCC ID QT5-RFID4 ISED Certification Number 4496A-RFID4 Hardware Version(s) B Software Version(s) 11.012 Number of Samples Tested 1 Test Specification/Issue/Date US Code of Federal Regulations (CFR): Title 47, Part 15, Subpart C: Radio Frequency Devices, Intentional Radiators, 2025 Innovation, Science and Economic Development Canada Radio Standards Specification: RSS-210 — Licence- Exempt Radio Apparatus: Category…

Text truncated - open the document above for the full version.

TÜV SÜD America Inc 141 14 th Street NW New Brighton, MN 55112 Phone: 651-631-2487 www.tuv-sud-america.com TÜV SÜD NAME JOB TITLE RESPONSIBLE FOR ISSUE DATE Omar Castillo Senior EMC / Wireless Test Engineer Authorized Signatory July 28, 2026 Signatures in this approval box have checked this document in line with the requirements of TÜV SÜD America, Inc. document control rules. FCC Accreditation Designation Number US1148 New Brighton, MN Test Laboratory Innovation, Science, and Economic Development Canada Accreditation Site Number 4512A New Brighton, MN Test Laboratory Certification Exhibit Test Photos Rimage Corporation RAS39 FCC ID: QT5-RFID4 IC: 4496A-RFID4 Prepared for: Rimage Corporation 4400 W 78 th Street Suite 110A Bloomington, MN 55435 COMMERCIAL-IN-CONFIDENCE Document Number: NC721020809.2 | Issue: 1 Document Number: NC721020809.2 | Issue: 1 COMMERCIAL-IN-CONFIDENCE Page 2 of 11 Contents 1 20 dB Bandwidth .........................................................................................................................3 2 99% Bandwidth ............................................................................................................................4 3 Radiated Field Strength of Emissions within 13.110-14.010 Band ........................................5 4 Radiated Field Strength of Emissions outside of the 13.110-14.010 Band ...........................6 5 Power Line Conducted Emission ..............................................................................................9 6 Frequency Tolerance of Carrier Signal .................................................................................. 11 Document Number: NC721020809.2 | Issue: 1 COMMERCIAL-IN-CONFIDENCE Page 3 of 11 1 20 dB Bandwidth Figure 1.1 – 20 dB BW Measurement Test Setup Photo Document Number: NC721020809.2 | Issue: 1 COMMERCIAL-IN-CONFIDENCE Page 4 of 11 2 99% Bandwidth Figure 2.1 – 99% BW Measurement Test Setup Photo Document Number: NC721020809.2 | Issue: 1 COMMERCIAL-IN-CONFIDENCE Page 5 of 11 3 Radiated Field Strength of Emissions within 13.110-14.010 Band Figure 3.1 – Radiated Field Strength of Emissions within the 13.110-14.010 MHz band – Front View Figure 3.2 – Radiated Field Strength of Emissions within the 13.110-14.010 MHz band – Rear View Document Number: NC721020809.2 | Issue: 1 COMMERCIAL-IN-CONFIDENCE Page 6 of 11 4 Radiated Field Strength of Emissions outside of the 13.110-14.010 Band Figure 4.1 – Radiated Spurius Emission 9k-150MHz – Front View Figure 4.2 – Radiated Spurius Emission 9k-150MHz – Rear View Document Number: NC721020809.2 | Issue: 1 COMMERCIAL-IN-CONFIDENCE Page 7 of 11 Figure 4.3 – Radiated Spurius Emission 30MHz – 1GHz – Front View Figure 4.4 – Radiated Spurius Emission 30MHz – 1GHz– Rear View Document Number: NC721020809.2 | Issue: 1 COMMERCIAL-IN-CONFIDENCE Page 8 of 11 Figure 4.5 – Radiated Spurius Emission 1-2GHz – Front View Figure 4.6 – Radiated Spurius Emission 1-2GHz – Rear View Document Number: NC721020809.2 | Issue: 1 COMMERCIAL-IN-CONFIDENCE Page 9 of 11 5 Power Line Conducted Emission Figure 5.1 – Power Line Conducted Emission – Front View Figure 5.2 – Power Line Conducted Emission – Front View Document Number: NC721020809.2 | Issue: 1 COMMERCIAL-IN-CONFIDENCE Page 10 of 11 Figure 5.3 – Power Line Conducted Emission – Rear View Figure 5.4 – Power Line Conducted Emission – Rear View Document Number: NC721020809.2 | Issue: 1 COMMERCIAL-IN-CONFIDENCE Page 11 of 11 6 Frequency Tolerance of Carrier Signal Figure 6.1 – Measurements in Extreme Conditions