QTLRM-1040GSM/WCDMA cellular device w/BT, BTLE, WLAN, NFC

Quick Guide 123123 Issue 1 EN RM-1040 Psst... This guide isn't all there is... There's a user guide in your phone – it's always with you, available when needed. Check out videos, find answers to your questions, and get helpful tips. Tap Lumia Help +Tips. If you’re new to Windows Phone, check out the section for new Windows Phone users. For the online user guidance, even more info, and troubleshooting help, go to www.nokia.com/support. Check out the support videos at www.youtube.com/ NokiaSupportVideos. For info on Microsoft Mobile Service terms and Privacy policy, go to www.nokia.com/privacy. First start-up Your new phone comes with great features that are installed when you start your phone for the first time. Allow some minutes while your phone sets up. 2 Quick Guide Contents For your safety 4 Keys and parts 6 Get started 8 Try out the touch screen 11 Get the basics 12 Take your friends with you 13 Help and tips 14 Feature-specific information 16 Product and safety info 16 3 For your safety We invite you to read the instructions on this guide before using the device. SWITCH OFF IN RESTRICTED AREAS Switch the device off when mobile phone use is not allowed or when it may cause interference or danger, for example, in aircraft, in hospitals or near medical equipment, fuel, chemicals, or blasting areas. Obey all instructions in restricted areas. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance. QUALIFIED SERVICE Only qualified personnel may install or repair this product. BATTERIES, CHARGERS, AND OTHER ACCESSORIES Use only batteries, chargers, and other accessories approved by Microsoft Mobile for use with this device. Third-party chargers that comply with the IEC/EN 62684 standard, and that can connect to your device micro USB connector, may be compatible. Do not connect incompatible products. KEEP YOUR DEVICE DRY Your device is not water-resistant. Keep it dry. GLASS PARTS The device screen is made of glass. This glass can break if the device is dropped on a hard surface or receives a substantial impact. If the glass breaks, do not touch the glass parts of the device or 4 attempt to remove the broken glass from the device. Stop using the device until the glass is replaced by qualified service personnel. PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use. SAR This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1.5 centimetres (5/8 inch) away from the body. The specific maximum SAR values can be found in the Certification Information (SAR) section of this user guide. For more info, go to www.sar-tick.com. When a carry case, belt clip or other form of device holder is used for body-worn operation, it should not contain metal and should provide at least the above-stated separation distance from the body. Note that mobile devices may be transmitting even if you are not making a voice call. 5 Keys and parts 1Earpiece 2Audio connector AHJ 3.5 mm 3Light sensor 4Front camera 5Volume keys 6Power/Lock key 7Microphone 8Antenna area 9Flash 10Camera 11NFC area 12Loudspeaker 13Micro-USB connector 14Microphone Some of the accessories mentioned in this user guide, such as charger, headset, or data cable, may be sold separately. Avoid touching the antenna area while the antenna is in use. Contact with antennas affects the communication quality and may reduce battery life due to higher power level during operation. 6 7 Get started Before you start using your phone, remove the back cover to insert the micro-SIM cards (also known as mini-UICC cards). Remove the back cover Make sure the phone is switched off. With the back of the phone facing you, place your thumb on the back of the phone next to the camera lens, and bend the cover open. Do not use any sharp tools, as they may damage the phone. 8 Insert the SIM and memory card 1. If the battery is in, lift it out. 2. Slide the micro-SIM card (SIM1) into the SIM slot with the metal contact area down. 3. If you have a second SIM card, push it into the SIM2 slot, until it locks into place. 4. If you have a memory card, slide the card into the memory card slot. It is recommended that you use a fast microSD card from a well-known manufacturer. Important: Your device uses a micro-SIM card, also known as a mini-UICC SIM card. Use of incompatible SIM cards, or use of SIM card adapters, may damage the card or the device, and may corrupt data stored on the card. 9 Replace the battery and back cover 1. Line up the battery contacts, and put the battery in. 2. Press the bottom edge of the back cover against the bottom edge of your phone. 3. Snap the cover into place. 4. To switch your phone on, press and hold the power key. Charge the battery Plug a compatible charger into a wall outlet, and connect the micro-USB end to your phone. You can also charge your phone from a computer with a USB cable. If the battery is completely discharged, it may take up to 20 minutes before the charging indicator is displayed. 10 Try out the touch screen To use your phone, simply tap or tap and hold the touch screen. Swipe To, for example, open the action centre, place a finger at the top of the screen, and slide it down. Zoom in or out Place 2 fingers on an item, such as a photo, and slide your fingers apart or together. Tap and hold to open a menu Place your finger on an item, until the menu opens. 11 Get the basics Make a call 1. Tap > , type in the phone number, and tap call. With a dual SIM phone, select the SIM you want to use. To type in the + character, used for international calls, tap and hold 0. The + character only works from abroad. The …

Text truncated - open the document above for the full version.

Microsoft Mobile Oy Tel +358 *(0) 7180 08000 Keilalahdentie 4 02150 ESPOO www.microsoft.com Finland August 18, 2014 Federal Communications Commission Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 Attention: Equipment Authorization Branch REQUEST FOR CONFIDENTIALITY Pursuant to Sections 0.457 (d) (l) (ii) and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of some of the information accompanying this Application of FCC ID: QTLRM-1040 and as outlined below: - Exhibit 4: Block Diagram - Exhibit 5: Schematic Diagrams - Exhibit 10: List of Active Devices and Tune-Up Procedure - Exhibit 12: Theory of Operation / Description of Circuitry These materials contain trade secrets and proprietary information not customarily released to the public and the public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457 (d) (l) (ii) disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Microsoft Mobile Oy Ren Shuifang Product Certification Officer Microsoft Corporation is an equal opportunity employer. Page 1 of 1

Microsoft Mobile Oy Tel +358 *(0) 7180 08000 Keilalahdentie 4 02150 ESPOO www.microsoft.com Finland Microsoft Corporation is an equal opportunity employer. Page 1 of 1 June 11, 2014 Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 Attention: Equipment Authorization Branch This letter will authorize the appointment of Ren Shuifang to act as our agent in all FCC matters for grantee code QTL. Yours Sincerely, Microsoft Mobile Oy Antero Koivisto Senior Specialist, Regulatory

Microsoft Mobile Oy Tel +358 *(0) 7180 08000 Keilalahdentie 4 02150 ESPOO www.microsoft.com Finland August 18, 2014 Federal Communications Commission Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 Attention: Equipment Authorization Branch REQUEST FOR SHORT TERM CONFIDENTIALITY Pursuant to Section 0.459 of the Commission’s Rules and Public Notice DA 04-1705 of June 15, 2004, the Applicant hereby requests for 90 days short term confidential treatment of some of the information accompanying this application of FCC ID: QTLRM-1040 and as outlined below: - Exhibit 3: External photos - Exhibit 7: Test setup photos - Exhibit 8: User's manual - Exhibit 9: Internal photos These materials contain proprietary information not yet released to the public and the public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. Microsoft Mobile Oy Ren Shuifang Product Certification Officer Microsoft Corporation is an equal opportunity employer. Page 1 of 1

Extern FCCID Micro nal phone Pic : QTLRM‐1040 soft Mobile Oy cture 0 y 12 AAug 2014 Copyright  2014Microsoft. All rights reserved. Extern FCCID Micro nal phone Pic : QTLRM‐1040 soft Mobile Oy cture 0 y 12 AAug 2014 Copyright  2014Microsoft. All rights reserved. Extern FCCID Micro nal phone Pic : QTLRM‐1040 soft Mobile Oy cture 0 y 12 AAug 2014 Copyright  2014Microsoft. All rights reserved. Extern FCCID Micro nal phone Pic : QTLRM‐1040 soft Mobile Oy cture 0 y 12 AAug 2014 Copyright  2014Microsoft. All rights reserved. Extern FCCID Micro nal phone Pic : QTLRM‐1040 soft Mobile Oy cture 0 y 12 AAug 2014 Copyright  2014Microsoft. All rights reserved.

Exhibit 01 Type FCCID: QTLRM- Microsoft Mobil e label -1040 le 2 0 014-08-15 Copyright  2014 Micro 1 (1) osoft. All righ hts reserved.

Intern Exhibi FCCID nal Picture t 09 Internal P : QTLRM‐104 0 icture 0 13 Aug 201 4 Copyright  2014 Microsooft. All rights re eserved. Intern Exhibi FCCID nal Picture t 09 Internal P : QTLRM‐104 0 icture 0 13 Aug 201 4 Copyright  2014 Microso oft. All rights reeserved. Intern Exhibi FCCID nal Picture t 09 Internal P : QTLRM‐104 0 icture 0 13 Aug 201 4 Copyright  2014 Microsooft. All rights reeserved.

____________________________________________________________________________ SAR Report FCC_RM-1040_01 Applicant: Microsoft Type: RM-1040 Copyright  2014 TCC Microsoft 1/78 SAR Compliance Test Report Test report no.: FCC_RM-1040_01 Date of report: 2014-07-31 Template version: 19.7 Number of pages: 78 Testing laboratory: TCC Microsoft Beijing Laboratory Beijing Economic and Technological Development Area No.5 Donghuan Zhonglu Beijing PRC China 100176 Tel. +86 10 8711 8888 Fax. +86 10 8711 4550 Client: Microsoft Beijing Economic and Technological Development Area No.5 Donghuan Zhonglu Beijing PRC China 100176 Tel. +86 10 8711 8888 Fax. +86 10 8711 4550 Responsible test engineer: Zhang Luwen Product contact person: Hu Helen Measurements made by: Yuan Rui, He Ying, Xu Liping, Wang Weike Tested device: RM-1040 FCC ID: QTLRM-1040 IC: - Supplement reports: SAR_Photo_RM-1040_02 Testing has been carried out in accordance with: 47CFR §2.1093 Radiofrequency Radiation Exposure Evaluation: Portable Devices FCC published RF exposure KDB procedures RSS-102, Issue 4 Evaluation Procedure for Mobile and Portable Radio Transmitters with Respect to Health Canada’s Safety Code 6 for Exposure of Humans to Radio Frequency Fields IEEE 1528 - 2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Technique Documentation: The documentation of the testing performed on the tested devices is archived for 15 years at TCC Microsoft. Test results: The tested device complies with the requirements in respect of all parameters subject to the test. The test results and statements relate only to the items tested. The test report shall not be reproduced except in full, without written approval of the laboratory. Date and signatures: For the contents: ____________________________________________________________________________ SAR Report FCC_RM-1040_01 Applicant: Microsoft Type: RM-1040 Copyright  2014 TCC Microsoft 2/78 CONTENTS 1. SUMMARY OF SAR TEST REPORT ............................................................................................................................................ 4 1.1 TEST DETAILS............................................................................................................................................................................ 4 1.2 MAXIMUM RESULTS ................................................................................................................................................................... 4 1.2.1 Head Configuration...................................................................................................................................................... 4 1.2.2 Body Worn Configuration .......................................................................................................................................... 5 1.2.3 Wireless Router Configuration ................................................................................................................................. 5 1.2.4 Summary SAR data ....................................................................................................................................................... 6 1.2.5 Maximum Drift .............................................................................................................................................................. 6 1.2.6 Measurement Uncertainty ......................................................................................................................................... 6 2. DESCRIPTION OF THE DEVICE UNDER TEST .......................................................................................................................... 7 2.1 POWER REDUCTIONS IN WIRELESS ROUTER CONFIGURATIONS ................................................................................................... 8 2.2 DESCRIPTION OF THE ANTENNA ................................................................................................................................................. 9 3. TEST CONDITIONS .................................................................................................................................................................. 10 3.1 TEMPERATURE AND HUMIDITY ................................................................................................................................................ 10 3.2 TEST SIGNAL, FREQUENCIES AND OUTPUT POWER .................................................................................................................. 10 4. DESCRIPTION OF THE TEST EQUIPMENT ............................................................................................................................. 11 4.1 MEASUREMENT SYSTEM AND COMPONENTS ............................................................................................................................ 11 4.1.1 Isotropic E-field Probe Type ES3DV3 ................................................................................................................... 13 4.1.2 Isotropic E-field Probe Type EX3DV4 ................................................................................................................... 13 4.2 PHANTOMS ............................................................................................................................................................................ 14 4.3 TISSUE SIMULANTS ................................................................................................................................................................ 14 4.3.1 Tissue Simulant Recipes .......................................................................................................................................... 14 4.4 SYSTEM VALIDATION AND SYSTEM CHECKING ..............................................................................................…

Text truncated - open the document above for the full version.

FCC Part 22/24 Compliance Test Report / Template Version 15.0 FCC22&24_RM-1040_06.docx Copyright © TCC Microsoft 1 (11) TCC Microsoft Beijing Laboratory Beijing Economic and Technological Development Area No.5 Donghuan Zhonglu Beijing PRC China 100176 Tel. +86 10 8711 8888 Fax. +86 10 8711 4550 FCC Part 22/24 Compliance Test Report Test Report no.: FCC22&24_RM-1040_06.docx Date of Report: 11-Aug-2014 Number of pages: 11 Customer’s Contact person: Hu Helen Testing laboratory: TCC Microsoft Beijing Laboratory Beijing Economic and Technological Development Area No.5 Donghuan Zhonglu Beijing PRC China 100176 Tel. +86 10 8711 8888 Fax. +86 10 8711 4550 Customer: Microsoft Beijing Economic and Technological Development Area No.5 Donghuan Zhonglu Beijing PRC China 100176 Tel. +86 10 8711 8888 Fax. +86 10 8711 4550 FCC listing no.: IC recognition no.: 975940 661AH-1 Tested devices/ accessories: Phone RM-1040 / Battery Samsung BV-T5A FCC ID: QTLRM-1040 IC: Supplement reports: - Testing has been carried out in accordance with: CFR 47, FCC rules Parts 22/24, TIA-603-C-2004 and IC standards, RSS-GEN (Issue 3, December 2010), RSS-132 (Issue 2, September 2005), RSS-133 (Issue 5, February 2009). Deviations, modifications or clarifications (if any) to above mentioned documents are written in each section under "Test method and limit". Documentation: The test report must always be reproduced in full; reproduction of an excerpt only is subject to written approval of the testing laboratory. The documentation of the testing performed on the tested devices is archived for 15 years at TCC Microsoft. Test Results: The EUT complies with the requirements in respect of all parameters subject to the test. The test results relate only to devices specified in this document Date and signature for the contents: Gao Sherina, Engineer, EMC FCC Part 22/24 Compliance Test Report / Template Version 15.0 FCC22&24_RM-1040_06.docx Copyright © TCC Microsoft 2 (11) TCC Microsoft Beijing Laboratory Beijing Economic and Technological Development Area No.5 Donghuan Zhonglu Beijing PRC China 100176 Tel. +86 10 8711 8888 Fax. +86 10 8711 4550 1. Summary for FCC Part 22/24 Compliance Test Report Date of receipt 14-Jul-2014 Testing completed 30-Jul-2014 The customer's contact person Hu Helen Test Plan referred to T:\Projects\RM-1040\TestPlan\RS_Testplan_RM-1040.xlsm Notes - Document name FCC22&24_RM-1040_06.docx 1.1. EUT and Accessory Information The EUT is a mobile phone with following features: GSM/WCDMA/WLAN/Bluetooth The EUT is tested with maximum rated TX power. Devices under tests Product Type SN HW MV SW DUT Phone RM-1040 SIM1:004402479886941;SIM2: 004402479886958 0221 - 02032.00000.14271.24000 54485 Battery Samsung BV-T5A 4175354224C10106707;067073 8 Proto V5 - - 54450 1.2. Summary of Test Results GSM 850: Section in CFR 47 Section in RSS-GEN or RSS-132 Name of the test Result §2.1046(a), 22.913(a) 4.4 Conducted RF output power NP §22.913(a) 4.4 Radiated RF output power PASSED §2.1049(h) 4.6.1 99 % occupied bandwidth NP §22.917(a) 4.5 Band edge compliance NP §22.917(a), §2.1051 4.5 Spurious emissions at antenna terminals NP §22.917(a), §2.1053 4.5 Spurious radiated emissions NP §2.1055(a) 4.3 Frequency stability, temperature variation NP §2.1055(d) 4.3 Frequency stability, voltage variation NP GSM 1900: Section in CFR 47 Section in RSS-GEN or RSS-133 Name of the test Result §2.1046(a) 6.4 Conducted RF output power NP §24.232(b) 6.4 Radiated RF output power PASSED §2.1049(h) 4.6.1 99 % occupied bandwidth NP §24.238(a) 6.5 Band edge compliance NP §24.238(a), §2.1051 6.5 Spurious emissions at antenna terminals NP §24.238(a), §2.1053 6.5 Spurious radiated emissions NP §2.1055(a) 6.3 Frequency stability, temperature variation NP §2.1055(d) 6.3 Frequency stability, voltage variation NP WCDMA 1900: Section in CFR 47 Section in RSS-GEN or RSS-133 Name of the test Result §2.1046(a) 6.4 Conducted RF output power NP §24.232(b) 6.4 Radiated RF output power PASSED §2.1049(h) 4.6.1 99 % occupied bandwidth NP FCC Part 22/24 Compliance Test Report / Template Version 15.0 FCC22&24_RM-1040_06.docx Copyright © TCC Microsoft 3 (11) TCC Microsoft Beijing Laboratory Beijing Economic and Technological Development Area No.5 Donghuan Zhonglu Beijing PRC China 100176 Tel. +86 10 8711 8888 Fax. +86 10 8711 4550 §24.238(a) 6.5 Band edge compliance NP §24.238(a), §2.1051 6.5 Spurious emissions at antenna terminals NP §24.238(a), §2.1053 6.5 Spurious radiated emissions NP §2.1055(a) 6.3 Frequency stability, temperature variation NP §2.1055(d) 6.3 Frequency stability, voltage variation NP WCDMA 850: Section in CFR 47 Section in RSS-GEN or RSS-132 Name of the test Result §2.1046(a), 22.913(a) 4.4 Conducted RF output power NP §22.913(a) 4.4 Radiated RF output power PASSED §2.1049(h) 4.6.1 99 % occupied bandwidth NP §22.917(a) 4.5 Band edge compliance NP §22.917(a), §2.1051 4.5 Spurious emissions at antenna terminals NP §22.917(a), §2.1053 4.5 Spurious radiated emissions NP §2.1055(a) 4.3 Frequency stability, temperature variation NP §2.1055(d) 4.3 Frequency stability, voltage variation NP PASSED The EUT complies with the essential requirements in the standard. FAILED The EUT does not comply with the essential requirements in the standard. NP The test was not performed by the TCC Microsoft Laboratory. FCC Part 22/24 Compliance Test Report / Template Version 15.0 FCC22&24_RM-1040_06.docx Copyright © TCC Microsoft 4 (11) TCC Microsoft Beijing Laboratory Beijing Economic and Technological Development Area No.5 Donghuan Zhonglu Beijing PRC China 100176 Tel. +86 10 8711 8888 Fax. +86 10 8711 4550 CONTENTS 1. Summary for FCC Part 22/24 Compliance Test Report ........................................... 2 1.1. EUT and Accessory Information ...........................................................................................................2 1.2. Summary of Test Results ..............................................................................................…

Text truncated - open the document above for the full version.

FCC Part 22/24 Compliance Test Report / Template Version 15.0 FCC22&24_RM-1040_07.docx Copyright © TCC Microsoft 1 (28) TCC Microsoft Beijing Laboratory Beijing Economic and Technological Development Area No.5 Donghuan Zhonglu Beijing PRC China 100176 Tel. +86 10 8711 8888 Fax. +86 10 8711 4550 FCC Part 22/24 Compliance Test Report Test Report no.: FCC22&24_RM-1040_07.docx Date of Report: 08-Aug-2014 Number of pages: 28 Customer’s Contact person: Hu Helen Testing laboratory: TCC Microsoft Beijing Laboratory Beijing Economic and Technological Development Area No.5 Donghuan Zhonglu Beijing PRC China 100176 Tel. +86 10 8711 8888 Fax. +86 10 8711 4550 Customer: Microsoft Beijing Economic and Technological Development Area No.5 Donghuan Zhonglu Beijing PRC China 100176 Tel. +86 10 8711 8888 Fax. +86 10 8711 4550 FCC listing no.: IC recognition no.: 975940 661AH-1 Tested devices/ accessories: Phone RM-1040 / Battery Samsung BV-T5A / Charger AC-20E / Headset WH-108 /Dummy Battery SD-233R FCC ID: QTLRM-1040 IC: Supplement reports: - Testing has been carried out in accordance with: CFR 47, FCC rules Parts 22/24, TIA-603-C-2004 and IC standards, RSS-GEN (Issue 3, December 2010), RSS-130 (Issue 1, October 2013), RSS-132 (Issue 2, September 2005), RSS-133 (Issue 5, February 2009). Deviations, modifications or clarifications (if any) to above mentioned documents are written in each section under "Test method and limit". Documentation: The test report must always be reproduced in full; reproduction of an excerpt only is subject to written approval of the testing laboratory. The documentation of the testing performed on the tested devices is archived for 15 years at TCC Microsoft. Test Results: The EUT complies with the requirements in respect of all parameters subject to the test. The test results relate only to devices specified in this document Date and signature for the contents: Gao Sherina, Engineer, EMC FCC Part 22/24 Compliance Test Report / Template Version 15.0 FCC22&24_RM-1040_07.docx Copyright © TCC Microsoft 2 (28) TCC Microsoft Beijing Laboratory Beijing Economic and Technological Development Area No.5 Donghuan Zhonglu Beijing PRC China 100176 Tel. +86 10 8711 8888 Fax. +86 10 8711 4550 1. Summary for FCC Part 22/24 Compliance Test Report Date of receipt 14-Jul-2041 Testing completed 05-Aug-2014 The customer's contact person Hu Helen Test Plan referred to T:\Projects\RM-1040\TestPlan\RS_Testplan_RM-1040.xlsm Notes - Document name FCC22&24_RM-1040_07.docx 1.1. EUT and Accessory Information The EUT is a mobile phone with following features: GSM/WCDMA/WLAN/Bluetooth The EUT is tested with maximum rated TX power. Devices under tests Product Type SN HW MV SW DUT Phone RM-1040 SIM1:004402479883344; SIM2:004402479883351 0221 - 02032.00000.14271.24000 54495 Battery Samsung BV-T5A 4175354224C10106730;0670738 Proto V5 - - 54453 AC- Charger AC-20E 4868672472450501571;0675628 - - - 54474 Headset WH-108 3022D71 - - - 54456 Dummy battery SD-233R DV1450401 - - - 54473 Phone RM-1040 SIM1:004402479886941;SIM2:004 402479886958 0221 - 02032.00000.14271.24000 54485 Battery Samsung BV-T5A 4175354224C10106707;0670738 Proto V5 - - 54450 AC- Charger AC-20E 4868672472430500314;0675628 - - - 54461 Headset WH-108 3022D71 - - - 54455 1.2. Summary of Test Results GSM 1900: Section in CFR 47 Section in RSS-GEN or RSS-133 Name of the test Result §2.1046(a) 6.4 Conducted RF output power NP §24.232(b) 6.4 Radiated RF output power NP §2.1049(h) 4.6.1 99 % occupied bandwidth PASSED §24.238(a) 6.5 Band edge compliance PASSED §24.238(a), §2.1051 6.5 Spurious emissions at antenna terminals NP §24.238(a), §2.1053 6.5 Spurious radiated emissions PASSED §2.1055(a) 6.3 Frequency stability, temperature variation PASSED §2.1055(d) 6.3 Frequency stability, voltage variation PASSED GSM 850: Section in CFR 47 Section in RSS-GEN or RSS-132 Name of the test Result §2.1046(a), 22.913(a) 4.4 Conducted RF output power NP §22.913(a) 4.4 Radiated RF output power NP §2.1049(h) 4.6.1 99 % occupied bandwidth PASSED §22.917(a) 4.5 Band edge compliance PASSED FCC Part 22/24 Compliance Test Report / Template Version 15.0 FCC22&24_RM-1040_07.docx Copyright © TCC Microsoft 3 (28) TCC Microsoft Beijing Laboratory Beijing Economic and Technological Development Area No.5 Donghuan Zhonglu Beijing PRC China 100176 Tel. +86 10 8711 8888 Fax. +86 10 8711 4550 §22.917(a), §2.1051 4.5 Spurious emissions at antenna terminals NP §22.917(a), §2.1053 4.5 Spurious radiated emissions PASSED §2.1055(a) 4.3 Frequency stability, temperature variation PASSED §2.1055(d) 4.3 Frequency stability, voltage variation PASSED WCDMA 1900: Section in CFR 47 Section in RSS-GEN or RSS-133 Name of the test Result §2.1046(a) 6.4 Conducted RF output power NP §24.232(b) 6.4 Radiated RF output power NP §2.1049(h) 4.6.1 99 % occupied bandwidth PASSED §24.238(a) 6.5 Band edge compliance PASSED §24.238(a), §2.1051 6.5 Spurious emissions at antenna terminals NP §24.238(a), §2.1053 6.5 Spurious radiated emissions PASSED §2.1055(a) 6.3 Frequency stability, temperature variation NP §2.1055(d) 6.3 Frequency stability, voltage variation NP WCDMA 850: Section in CFR 47 Section in RSS-GEN or RSS-132 Name of the test Result §2.1046(a), 22.913(a) 4.4 Conducted RF output power NP §22.913(a) 4.4 Radiated RF output power NP §2.1049(h) 4.6.1 99 % occupied bandwidth PASSED §22.917(a) 4.5 Band edge compliance PASSED §22.917(a), §2.1051 4.5 Spurious emissions at antenna terminals NP §22.917(a), §2.1053 4.5 Spurious radiated emissions PASSED §2.1055(a) 4.3 Frequency stability, temperature variation NP §2.1055(d) 4.3 Frequency stability, voltage variation NP PASSED The EUT complies with the essential requirements in the standard. FAILED The EUT does not comply with the essential requirements in the standard. NP The test was not performed by the TCC Microsoft Laboratory. FCC Part 22/24 Compliance Test Report / Template Version 15.0 FCC22&24_RM-1040_07.docx Copyright © TCC Microsoft 4 (28) TCC Microsoft Beij…

Text truncated - open the document above for the full version.

____________________________________________________________________________ SAR Report SAR_Photo_RM-1040_02 Applicant: Microsoft Type: RM-1040 Copyright  2014 TCC Microsoft 1/7 Test Setup photos for RM-1040 SAR Compliance Test Report Test report no.: SAR_Photo_RM-1040_02 Date of report: 2014-07-31 Template version: 19.7 Number of pages: 7 Testing laboratory: TCC Microsoft Beijing Laboratory Beijing Economic and Technological Development Area No.5 Donghuan Zhonglu Beijing PRC China 100176 Tel. +86 10 8711 8888 Fax. +86 10 8711 4550 Client: Microsoft Beijing Economic and Technological Development Area No.5 Donghuan Zhonglu Beijing PRC China 100176 Tel. +86 10 8711 8888 Fax. +86 10 8711 4550 Responsible test engineer: Zhang Luwen Product contact person: Hu Helen Measurements made by: Yuan Rui, He Ying, Xu Liping, Wang Weike Tested device: RM-1040 FCC ID: QTLRM-1040 IC: - Supplement reports: FCC_RM-1040_01 Testing has been carried out in accordance with: 47CFR §2.1093 Radiofrequency Radiation Exposure Evaluation: Portable Devices FCC published RF exposure KDB procedures RSS-102, Issue 4 Evaluation Procedure for Mobile and Portable Radio Transmitters with Respect to Health Canada’s Safety Code 6 for Exposure of Humans to Radio Frequency Fields IEEE 1528 - 2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Technique Documentation: The documentation of the testing performed on the tested devices is archived for 15 years at TCC Microsoft. Test results: The tested device complies with the requirements in respect of all parameters subject to the test. The test results and statements relate only to the items tested. The test report shall not be reproduced except in full, without written approval of the laboratory. Date and signatures: For the contents: ___________________________________…

Text truncated - open the document above for the full version.