QTRCAS10001Wireless Internet Camera

Wireless Internet Camera Quick Installation Guide Schnellinstallationsanleitung Guide d’Installation Rapide Guía de instalación rápida FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. NOTE : THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. CAUTION: To comply with the FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of the Wireless Camera and all persons. Use only the supplied antennas. Unauthorized antennas, modifications, or attachments could damage the transmitter and may violate FCC Regulations. 1 Wireless Internet Camera Quick Installation Guide Rev. 01 (Dec, 2001) Q20011204 Printed In Taiwan 2 Table of Content INTRODUCTION.............................................................................4 SYSTEM REQUIREMENT..............................................................5 WIRELESS INTERNET CAMERA............................................................5 Network:....................................................................................5 Recommended PC or Notebook to Access the Wireless Internet Camera......................................................................................5 PHYSICAL DESCRIPTION............................................................6 FRONT PANEL.................................................................................6 Power LED................................................................................6 LAN/WLAN LED........................................................................6 REAR PANEL...................................................................................7 Network Cable Connector..........................................................8 DC Power Connector.................................................................8 Reset Button...............................................................................8 Slide Switch...............................................................................9 I/O Connector............................................................................9 Antenna Connector.....................................................................9 TOP PANEL......................................................................................9 Screw Hole...............................................................................10 BOTTOM PANEL............................................................................10 Screw Hole...............................................................................10 HARDWARE INSTALLATION....................................................11 1 ATTACH WIRELESS ANTENNA.....................................................11 2 CONFIGURE NETWORK COMMUNICATION....................................11 3 CONNECT AN ETHERNET CABLE..................................................12 4 ATTACH THE EXTERNAL POWER SUPPLY......................................12 SOFTWARE INSTALLATION......................................................13 WEB CONFIGURATION...................................................................13 3 IPVIEW APPLICATION INSTALLATION.................................21 INSTALLATION..............................................................................21 APPENDIX......................................................................................28 4 Introduction Thank you for the purchase of the Wireless Internet Camera connecting directly to an Ethernet or Fast Ethernet network and also supported by the wireless transmission based on the IEEE 802.11b standard. It is different from the conventional PC Camera, the Wireless Internet Camera is a standalone system with built-in CPU and web-based solutions providing a low cost solution that can transmit high quality video images for monitoring. The Wireless Internet Camera can be managed remotely, accessed and controlled from any PC/Notebook over the Intranet or Internet via a web browser. The simple installation procedures and web-based interface offers easy integration to your network application environments coupled with many applications such as remote monitoring for a cost-effective solution. 5 System Requirement Wireless Internet Camera Network: Local Area Network: 10Base-T Ethernet or 100Base TX Fast Ethernet Wireless Local Area Network: IEEE 802.11b Wireless LAN Recommended PC or Notebook to Access the Wireless Internet Camera Web Browser: System requirement: CPU: Pentium II, 266 MHz or above Memory Size: 32 MB (64 MB recommended) VGA card resolution: 800x600 or above • Internet Explorer 5.0 or above (ActiveX & JAVA Mode – Image View for Windows OS and JAVA Mode – Image View for other OS) • Netscape 6.0 or above (JAVA Mode – Image View) IPView Application: Support OS: Win 98, Win 98 SE, Win 2000, Win Me, Win XP System requirement for IPView: CPU: Pentium III, 450 MHz or above Memory Size: 128 MB (256 MB recommended) VGA card resolution: 800x600 or above 6 Physical Description This section describes the features and benefits of the Wireless Internet Camera Front Panel Power LED The Power LED is positioned on the right side of the Wireless Internet Camera’s lens while facing the Wireless Internet Camera. Steady blue confirms the Wireless Internet Camera is powered on. Note: There are three settings for the Power LED to control the light illumination for monitoring purpose from Normal / Off / Dummy. Please refer to the Web Co…

Text truncated - open the document above for the full version.

            !  "
#$$%&&%'$&%& (#$$%&&%'$&% ) #  * '  


           !"#$% &  # '(  ) *"+ , $-. /0!12"3
 0+4 1 12"5 65 *"+ 70+# 123   " 1  
89%  70+#0: "3"; % 4$-9   
  :5!" )-) 4%
 '(   #  
 

    







Report No.: 031H007FI Page : 1 of 12 Version:1.0 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo

Cellvision Systems Inc. FCC ID.: QTRCAS10001 FCC ID AND DoC Label The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below. Wireless Internet Camera Cellvision Model No.: CAS-200W, C-CAS-200W, CWC-8100, NC-220W, TV-IP200W, WLC-CAM11G, ICA-100W, EW-ICAM TESTED TO COMPLY WITH FCC STANDARDS FOR HOME OR OFFICE USE S/N: Made in Taiwan Wireless Internet Camera Model No.: CAS-200W, C-CAS-200W, CWC-8100, NC-220W, TV-IP200W, WLC-CAM11G, ICA-100W, EW-ICAM F F C C C C I I D D : : Q Q T T R R C C A A S S 1 1 0 0 0 0 0 0 1 1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: Made in Taiwan

Cellvision Systems Inc. FCC ID.: QTRCAS10001 FCC ID AND DoC Label The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below. Wireless Internet Camera Cellvision Model No.: CAS-200W, C-CAS-200W, CWC-8100, NC-220W, TV-IP200W, WLC-CAM11G, ICA-100W, EW-ICAM TESTED TO COMPLY WITH FCC STANDARDS FOR HOME OR OFFICE USE S/N: Made in Taiwan Wireless Internet Camera Model No.: CAS-200W, C-CAS-200W, CWC-8100, NC-220W, TV-IP200W, WLC-CAM11G, ICA-100W, EW-ICAM F F C C C C I I D D : : Q Q T T R R C C A A S S 1 1 0 0 0 0 0 0 1 1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: Made in Taiwan

Report No.: 031H007FI Page : 2 of 12 Version:1.0 (3) EUT Photo (4) EUT Photo Report No.: 031H007FI Page : 3 of 12 Version:1.0 (5) EUT Photo (6) EUT Photo Report No.: 031H007FI Page : 4 of 12 Version:1.0 (7) EUT Photo (8) EUT Photo Report No.: 031H007FI Page : 5 of 12 Version:1.0 (9) EUT Photo Report No.: 031H007FI Page : 6 of 12 Version:1.0 (10) EUT Photo Report No.: 031H007FI Page : 7 of 12 Version:1.0 (11) EUT Photo (12) EUT Photo Report No.: 031H007FI Page : 8 of 12 Version:1.0 (13) EUT Photo Report No.: 031H007FI Page : 9 of 12 Version:1.0 (14) EUT Photo Report No.: 031H007FI Page : 10 of 12 Version:1.0 (15) EUT Photo (16) EUT Photo Report No.: 031H007FI Page : 11 of 12 Version:1.0 (17) EUT Photo (18) EUT Photo Report No.: 031H007FI Page : 12 of 12 Version:1.0 (19) EUT Photo (20) EUT Photo

Report No. 031H007FI Page: 6 of 37 Version:1.0 1.2. Operational Description EUT is a Wireless Internet Camera with 11 channels. This device provided four kind of transmitting speed 1,2,5.5 and 11Mbps. The device of RF carrier is DQPSK, DB PSK and CCK. The device adapts direct sequence spread spectrum modulation. The Connector antenna was provides diversity function to improve the receiving function. This Wireless Internet Camera is an IEEE 802.11b Wireless LAN adapter. It allows your computer to connect to a wireless network and to share resources, such as files or printers without being bound to the network wires. Operation in 2.4GHz Direst Sequence Spread Spectrum (DSSS) radio transmission, the Wireless Internet Camera transfers data at speeds up to 64/128-bit Wired Equivalent Protection (WEP) algorithm is used. In addition, its standard compliance ensures that it can communicate with any 802.11b network.

          Pin 29(U1_C TS) ID0= 0 0.01U*2 Software V ersion : 0.01UF*11(VDDIO,VDDC) Pin 38(/WR) = PU : ROM 16bit Pin 116(TXD1_3/ PDIVD1) = PU Pin 115(TXD1_2/ PDIVD0) = PU Pin 114(TXD1_1/ PFEREQ1) = PD Pin 112(TXD1_0/ PFEREQ0) = PU 25MHZ*4= 100MHZ Pin 117(TXEN1/CLKJMP) =PD : Clkout = X'tal 45 65 75 91 99 123 23 59 97 63 18 3 100PF*2(VDDP) Pin 33(ATPGEN)=PD : Sacn chain disable Pin 28(DTR1/SBWSEL)=PU : UART1 disable Pin 32(JTAGEN)=PD : JTAGE disable Pin 30(U1_D SR) ID1= 0
 
           !"# $%  &! ' ( )$ "$% * #   +  ,  -* .*. * .
 .
 .* . * .
& .
& .* . * ./0 ./* . 0 ./ * .
 .
1 .*02 -3 .
 3 4 356  && 11 .
 .
 .
1.
& & 143&6 5 1 // .
"  7 88697 88&9 . -
0 -
 *  -* . 0 . 0 /"/" // :/:

/*;0**;<*;
;




 ;7 8819*;7 8819 "-:/0"-:/0 .*-
 .*-
 .- 0.-*=:.-
-
>=:? ."0 00-
 ?
?2; ;;1;    ;0"  <-<   * .* *  <-< 46 5 .
.
& *   00- <

181< 181< 181< 181< 181< 181< 181< 181< 181< 181< 181< 181< 181<181< 181< 181< 181< 181< 181< 181< <

<

<

<

* 4&&@.5

&
4
&5 *3 4&&@.5 4
4A1 3  6
44A1 & 5
&6 ; ;B &:?( 44A1  1 
&3
 A 5 4?
2    * 4&&@.5 * 11 &@.5 *4& 4&&@.5
5 *54 >&@.5 5 4A 6  1
6 8 A
5 *6 4&C&@.5  1 645& * & 4&&@.5 *1 11 &@.5 44A1  1
5
&1  A. < *3 4&&@.5
3 *5 4&&@.5 * 6 >&@.5 *4 4&&@.5 *6 4&&@.5 * 4&&@.5
1 8 A 54A 6 & 5 54A 6  1  *6 4&&@.5 *3 4&&@.5  4?
2   
&4
 8 A &4<
 1  *4 4&C&@.5  1 645&
 4A. &<
6 4A. &< *1 4&C&@.5  1 645& * 3  >&@.5 *& 4&&@.5 *511 &@.5 *13 4&&@.5 *15 4&&@.5 *14 4&&@.5 *1& 4&&@.5 6*5  6 4   1 65 5 &4 6&66 65  5 & 11&   3&3313 3 63666455 &6&4&5&&1& 4346444544 53566 55&& 3641 35  4 545 3   & 5& 1416 6  541 1113 &5&4&333  1 15&&41636 1                          3   4 6 31 1  ;; :*" :*/ :*/*=."5" ".00
/"* .3
 .6 0
* =: 
 

 
1
&   1&5463   1&  .: .:  ..: 1.:1&.:&5.:54.:46.:6  .: .  .1. .1&.5.&6.4 3.0 

>/ .:3.:3 4.5 :*"*= ."&*0" ." . / .1" . * *. 0 * </</": =:? -
> D20" 20" / 4/ 6/ 3 </</</</</</</</</</</</               
  
   
  



 


 * . * .
 .&* . *. *. 0
.:*.
>
.  ! *1  >&@.5 *1  >&@.5 *1 >&@.5 * 4&C&@.5  1 645& 5
4A 6 3  6 * 4 4&&@.5 *& >&@.5 *5 4&&@.5 *4 4&&@.5 *3 4&C&@.5  1 645& *6  >&@.5 *11 4&&@.5 *16 4&&@.5 *55 11 &@.5 * 4&C&@.5  1 645& *5 4&C&@.5  1 645& * 4&C&@.5  1 645& = ;
5A
1  :*;
5 1  <" </ < *5  >@.5
14 8A *44 >&@.5 *46 >&@.5
 8 A   ?//" *4 :&@.5 50 5
5 A *5 4&C&@.5  1 645& *43  >&@.5
1 * 4&&@.5

 8 A * 11&@.5 &4<
  * 4&&@.5 * 4&C&@.5  1 645& ./0 EF./* EF . 0 EF./ * EF .*02 EF -3 EF .
 E1F -
> E F .
 E F " EF -
 EF . -
0 EF . 0 E1F . 0 E1F // E F // E F /" E F /" E F 7 88&9 E !1!F 7 8869 E !F ;7 8819 E1F *;7 8819 E1F ;
E1F*;
E1F*;< E1F*;0* E1F
/ E1F :/ E1F:
E1F "-:/0 EF "-:/0 EF .* E !F. * E F -
 EF.-* E F.- 0 E F=: E F.-
 E F=:? E F ."0 E1F 00-
 E1F ?
?2 E1F ;0" E1F <-< E1F .* E1F*  EF * EF 00-

          0.01UF*2 0.01UF*4 1257 133844 37 
           !"# $%  &! : $ G/ ' ( )$ "$% * #   +  , 1.* 1 5&4 5  4 &  63  3 6  154 1 &   &  6.
 . * -
>.- 0.-
 =:=:? .-*   1&5463  1&   1&546 3 7 88&97 8869 //// /"/" 181< 181< 181< 181< 181<181< 181< 181< 181< <

<

<

<

181<181<181<181< *5  >&@.5 *5  >&@.5
53
54
41 8 A
55  3< / 3A  /  1&5463   1&5463  1  645&1  131614151&1111 11 3 6 4 5 & &1  36"
"
. 0.*00"
"
*."
445&1  5 .0 < =& =4 = =5 =1 =& = = <

= =1 = = =3==6= ./0 < .
0 
5& *&5 &@. *&4 &@. *&& 11 &@.5 *& 11 &@.5 1

 1 "  1 H // 

 1 "  1 H // *51 11 &@.5 *5 11 &@.5 

 1 "  1 H  // D *  1&546  1&546 3>:5  1&563 13  1&563  & 4116 4 11&  1  4 6 31 11 & 56345& 151114 = == =1==&=5=4=6=3 = == =1==& << <=<=<=<= <=<=<=<=
>0
>  1&5463 .<<
 *
 0 =: =: "
"
.*A 

 1 "  1 H  //
56
4 7 8869 E!F 7 88&9 E!1!F . * EF .* E!F.
 EF -
> EF .-* EF .-
 EF .- 0 EF =: EF=:? EF /" EF /" EF // EF // EF

          0603 modesel[1:0]=10 | Slave I2C mode SW1 : 1 | Remote wakeup disable SW0 : 1 | Load TWAIN dri ver data upload disable 0.01UF*424 13 31 47 42 38 7 0.01UF*3 RXD[0:3] INT# = 000 01B | PHY ADDRESS PIN29(LED3)=PU | NWA…

Text truncated - open the document above for the full version.

Report No. 031H007FI Page: 1 of 37 Version:1.0 Test Report Product Name : Wireless Internet Camera Model No.: CAS-200W, C-CAS-200W, CWC-8100, NC-220W, TV-IP200W, WLC-CAM11G, ICA-100W, EW-ICAM FCC ID.: QTRCAS10001 Applicant : Cellvision Systems Inc. Address : 18F-7, No. 79, Sec. 1, Hsin Taiwu Road, Hsichih, Taipei, Taiwan, R.O.C. Date of Receipt : Jan 02, 2003 Date of Test : Feb 17, 2003 Report No. : 031H007FI The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Report No. 031H007FI Page: 3 of 37 Version:1.0 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION .....................................................................................................5 1.1. EUT Description............................................................................................................................5 1.2. Operational Description ................................................................................................................6 1.3. Tested System Datails....................................................................................................................7 1.4. Configuration of tested System .....................................................................................................8 1.5. EUT Exercise Software .................................................................................................................8 1.6. Test Facility ...................................................................................................................................9 2. Conducted Emission..................................................................................................................10 2.1. Test Equipment............................................................................................................................10 2.2. Test Setup ....................................................................................................................................10 2.3. Limits ..........................................................................................................................................10 2.4. Test Procedure .............................................................................................................................11 2.5. Test Result of Conducted Emission.............................................................................................12 3. Peak Power Output ...................................................................................................................14 3.1. Test Equipment............................................................................................................................14 3.2. Test Setup ....................................................................................................................................14 3.3. Limits ..........................................................................................................................................14 3.4. Test Result of Peak Power Output...............................................................................................15 4. RF Exposure Evaluation ...........................................................................................................16 4.1. Limits ..........................................................................................................................................16 4.2. Test Procedure .............................................................................................................................16 4.3. Test Result of RF Exposure Evaluation.......................................................................................17 5. Radiated Emission .....................................................................................................................18 5.1. Test Equipment............................................................................................................................18 5.2. Test Setup ....................................................................................................................................18 5.3. Limits ..........................................................................................................................................19 5.4. Test Procedure .............................................................................................................................20 5.5. Test Result of Radiated Emission................................................................................................21 6. Band Edge ..................................................................................................................................27 6.1. Test Equipment............................................................................................................................27 6.2. Test Setup ....................................................................................................................................27 6.3. Limits ..........................................................................................................................................28 6.4. Test Procedure .............................................................................................................................28 6.5. Test Result of Band Edge ............................................................................................................29 7. Occupied Bandwidth .................................................................................................................31 7.1. Test Equipment............................................................................................................................31 7.2. Test Setup .............................…

Text truncated - open the document above for the full version.

Report No.: 031H007FI Page : 1 of 3 Version:1.0 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 031H007FI Page : 2 of 3 Version:1.0 Front View of Radiated Test Back View of Radiated Test Report No.: 031H007FI Page : 3 of 3 Version:1.0 Front View of Radiated Test (Horn)