QW3-BT11FTT06USB Bluetooth Dongle

Formosa Teletek Corporation BTW User’s Guide Version: 1.2 Formosa Teletek Corporation 358, Huaya 2nd Rd., Gueishan Shiang, Taoyuan, Taiwan Tel: 886-3-3280800 Fax: 886-3-3281231 Software & Driver Installation(98/ME/2000/XP) 1. Close any open programs and insert the utility CD into your CD-ROM Driver. 2. Click on the My Computer icon on your desktop. (a) Click on the icon representing your CD-ROM to open it. (b) Double click on the “SETUP” icon. 3. The Welcome screen informs you that the WIDCOMM Bluetooth Software Setup program is ready to begin. Click on the “Next” button. 4. I n the License Agreement screen, click on the radio button to the left of ”I accept the terms in the license agreement”. Click on the ”Next” button. 5. In the Device information screen: l Enter a device name. l Select a device type. l Click on the “Next” button. 6. In the Destination Folder screen you are asked to confirm the application software. If you would like, you may change the destination folder to another location as the directory. 7. The Ready to install the Program screen informs you that the driver is ready for installation. Click on the “Install” button to continue. Note: Please click on “OK” button from the Driver Signature Notice dialog box to proceed with driver installation in Win2000 and WinXP operating system. 8. When the files have been copied, you will be presented with a screen informing of its completion. (a) Click on the ”Finish” button, a pop-up dialog box will on the screen. (b) Click the ”Yes” button to reboot your PC. 9. After you reboot your PC, the FORMOSA TELETEK USB DONGLE Driver will install Finish and the ”Bluetooth Icon” resides in the Windows system tray. Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. User Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The FCC require the user to be notified that any changes or modification made to this device that are not expressly approved by FORMOSA TELETEK CORPORATION may void the user’s authority to operate the equipment. To comply with FCC RF exposure requirement, this device and its antenna must no be co-located or operating in conjunction with any other antenna or transmitter.

From: [email protected] Sent: Monday, June 02, 2003 1:24 AM To: Mike Kuo Subject: Re: Formosa Teletec Corporation, FCC ID:QW3-BT111FTT06, AN03T2890 Dear Mike, Attached files please find the revised documents for Question#1,#3,#4 and #5. Regarding the Question #2, this metal plate couldn't remove it, because it mounted on the chip(it's a part of chip, same as Intel P4). Please be free to contact me if there is any problems. Thank you very much for your support for this case. Best regards, Rick Hu ETC ----- Original Message ----- From: "Mike Kuo" <[email protected]> To: <[email protected]> Sent: Saturday, May 31, 2003 6:17 AM Subject: FW: Formosa Teletec Corporation, FCC ID:QW3-BT111FTT06, AN03T2890 > > > -----Original Message----- > From: CERTADM > Sent: Friday, May 30, 2003 3:11 PM > To: '[email protected]' > Subject: Formosa Teletec Corporation, FCC ID:QW3-BT111FTT06, AN03T2890 > > > Notice_content > ------------- > Question #1: FCC ID label format does not comply with the requirement as > stated in section 2.925(a)(1) of FCC rules. Please change " ID:" to " FCC > ID: " and the number shall be on the single line. Please provide revised > FCC ID label format to comply this requirement. > > Question #2: Pleas provide additional internal photo by removing the metal > plate as shown in section 4 of internal photo file. > > Question #3: Section 4.4 of test report footnote #4 is misleading. Footnote > indicates that the device was rotated at X, Y, and Z direction. Per the > setup photo, the EUT was directly connected to the notebook computer. > Please explain footnote 4. > > Question #4: Section 10.4 of Test report : the peak readings are over the > average limits, please provide average reading for those restricted band > where the peak is over the average limits. > > Question #5: User manual does not include RF exposure information. Suggested > wording may be " To comply with FCC RF exposure requirement, this device and > its antenna must no be co-located or operating in conjunction with any other > antenna or transmitter." > > Best Regards > > Mike Kuo > The items indicated above must be submitted before processing can continue > on the above referenced application. Failure to provide the requested > information within 60 days of the original e-mail date may result in > application dismissal and forfeiture of the filing fee. Also, please note > that partial responses increase processing time and should not be submitted. > Any questions about the content of this correspondence should be directed to > the e-mail address listed below the name of the sender. >

ETC Report No.: ET92S-05-014-01Page A1 of A1 FCC ID: QW3-BT111FTT06 ANNEX A: EXTERNAL CONSTRUCTION PHOTOS OF EUT 1. Outside view 1 of EUT 2. Outside view 2 of EUT

Label 8mm 20mm

ETC Report No.: ET92S-05-014-01Page B1 of B2 FCC ID: QW3-BT111FTT06 ANNEX B: INTERNAL CONSTRUCTION PHOTOS OF EUT 1. Inside View 1 of EUT 2. Inside View 2 of EUT ETC Report No.: ET92S-05-014-01Page B2 of B2 FCC ID: QW3-BT111FTT06 3. Front View of PCB1 4. Rear View of PCB1

Description of Operation Principle This device is connected to PC or other host devices through USB connector on one side, and propagates microwave signals from the antenna on the other side. The microwave signals in the air are received by the antenna of the receiver, through Tx/Rx switch which is controlled by the transceiver, then mixed with the 12MHz signals generated by the crystal, and down convert to frequency of base-band. The signals from the transceiver finally transfer to USB signals through base-band controller and exchange data with PC or other host devices.

Rev. No 1.0 FCC Part 15 EMI TEST REPORT of E.U.T. : USB Dongle MODEL : BT111FTT06 FCC ID. : QW3-BT111FTT06 for APPLICANT : Formosa Teletek Corporation ADDRESS: 358, Huaya 2nd Rd., Gueishan Shiang, Taoyuan, Taiwan Test Performed by ELECTRONICS TESTING CENTER, TAIWAN NO. 8 LANE 29, WENMIMG ROAD, LOSHAN TSUN, KWEISHAN HSIANG, TAOYUAN, TAIWAN, R.O.C. Tel:(03)3280026#570~576 Fax:(03)3276188 Report Number : ET92S-05-014-01 ETC Report No. : ET92S-05-014-01FCC ID. : QW3-BT111FTT06 Rev. No 1.0 TEST REPORT CERTIFICATION Applicant: Formosa Teletek Corporation 358, Huaya 2nd Rd., Gueishan Shiang, Taoyuan, Taiwan Manufacturer: Formosa Teletek Corporation 358, Huaya 2nd Rd., Gueishan Shiang, Taoyuan, Taiwan Description of EUT: a) Type of EUT: USB Dongle b) Trade Name: Formosa Teletek Corporation c) Model No.: BT111FTT06 d) Power Supply: DC 5V (PROVIDED BY NOTEBOOK PC ASUS / A1300) Regulation Applied: FCC Rules and Regulations Part 15 Subpart B & C (2002) I HEREBY CERTIFY THAT: The data shown in this report were made in accordance with the procedures given in ANSI C63.4, and the energy emitted by the device was founded to be within the limits applicable. I assume full responsibility for accuracy and completeness of these data. Note: 1. The result of the testing report relate only to the item tested. 2. The testing report shall not be reproduced expect in full, without the written approval of ETC. Issued Date :May 28, 2003 Test Engineer : Approve & Authorized Signer : Signature Win-Po Tsai Manager of EMC Testing Department Electronics Testing Center, Taiwan ETC Report No. : ET92S-05-014-01FCC ID. : QW3-BT111FTT06 Rev. No 1.0 Table of ContentsPage 1 GENERAL INFORMATION .......................................................................................................1 1.1 Product Description ......................................................................................................................1 1.2 Characteristics of Device ..............................................................................................................1 1.3 Test Methodology .........................................................................................................................1 1.4 Modifiction List of EUT ...............................................................................................................1 1.5 Test Facility ..................................................................................................................................1 2 PROVISIONS APPLICABLE ......................................................................................................2 2.1 Definition ......................................................................................................................................2 2.2 Requirement for Compliance ........................................................................................................3 2.3 Restricted Bands of Operation ......................................................................................................5 2.4 Labeling Requirement...................................................................................................................5 2.5 User Information ...........................................................................................................................6 3. SYSTEM TEST CONFIGURATION ..........................................................................................7 3.1 Justification ...................................................................................................................................7 3.2 Devices for Tested System............................................................................................................7 4 RADIATED EMISSION MEASUREMENT ..............................................................................8 4.1 Applicable Standard......................................................................................................................8 4.2 Measurement Procedure ...............................................................................................................8 4.3 Measuring Instrument .................................................................................................................10 4.4 Radiated Emission Data ..............................................................................................................11 4.4.1 RF Portion......................................................................................................................................... 11 4.4.2 Other Emission 30M~25G ......................................................................................................... 14 4.5 Field Strength Calculation ..........................................................................................................14 4.6 Photos of Radiation Measuring Setup ........................................................................................17 5 CONDUCTED EMISSION MEASUREMENT ........................................................................18 5.1 Applicable Standard....................................................................................................................18 5.2 Measurement Procedure .............................................................................................................18 5.3 Conducted Emission Data...........................................................................................................19 5.4 Result Data Calculation ..............................................................................................................28 5.5 Conducted Measurement Equipment ..........................................................................................28 5.6 Photos of Conduction Measuring Setup .....................................................................................29 6 ANTENNA REQUIREMENT ......................................................…

Text truncated - open the document above for the full version.

ETC Report No. : ET92S-05-014-01Sheet 11 of 70 Sheets FCC ID. : QW3-BT111FTT06 Rev. No 1.0 4.4 Radiated Emission Data 4.4.1 RF Portion a) Channel 0 Operation Mode: Receiving /Transmitting Fundamental Frequency : 2402 MHz Test Date : May 23, 2003Temperature : 24 Humidity : 65 % Frequency (MHz) Reading (dBuV) H V Peak Ave Peak Ave Factor (dB) Corr. Result @3m (dBuV/m) Peak Ave (H/V Max.) Limit @3m (dBuV/m) Peak Ave. Margin (dB) Table Deg. (Deg.) Ant. High (m) 1201.000---------------------74.054.0--------- 3603.000---------------------74.054.0--------- 4804.000---------------------74.054.0--------- 7206.000---------------------74.054.0--------- 9608.000---------------------74.054.0--------- 12010.000---------------------74.054.0--------- 14412.000---------------------74.054.0--------- 16814.000---------------------74.054.0--------- 19216.000---------------------74.054.0--------- 21618.000---------------------74.054.0--------- 24020.000---------------------74.054.0--------- Note : 1. Item of margin shown in above table refer to average limit. 2. Remark “---” means that the emissions level is too low to be measured. 3. Item “Margin” referred to Average limit while there is only peak result. 4. The radiation emissions have been measured to beyond the tenth harmonic of the fundamenta frequency and show the significant frequencies, other means the value is too low to be detected. ETC Report No. : ET92S-05-014-01Sheet 12 of 70 Sheets FCC ID. : QW3-BT111FTT06 Rev. No 1.0 b) Channel 39 Operation Mode: Receiving / Transmitting Fundamental Frequency : 2441 MHz Test Date : May 23, 2003Temperature : 24 Humidity : 69 % Frequency (MHz) Reading (dBuV) H V Peak Ave Peak Ave Factor (dB) Corr. Result @3m (dBuV/m) Peak Ave (H/V Max.) Limit @3m (dBuV/m) Peak Ave. Margin (dB) Table Deg. (Deg.) Ant. High (m) 1220.000---------------------74.054.0--------- 3660.000---------------------74.054.0--------- 4888.000---------------------74.054.0--------- 7320.000---------------------74.054.0--------- 9760.000---------------------74.054.0--------- 12200.000---------------------74.054.0--------- 14640.000---------------------74.054.0--------- 17080.000---------------------74.054.0--------- 19520.000---------------------74.054.0--------- 21960.000---------------------74.054.0--------- 24400.000---------------------74.054.0--------- Note : 1. Item of margin shown in above table refer to average limit. 2. Remark “---” means that the emissions level is too low to be measured. 3. Item “Margin” referred to Average limit while there is only peak result. 4. The radiation emissions have been measured to beyond the tenth harmonic of the fundamenta frequency and show the significant frequencies, other means the value is too low to be detected. ETC Report No. : ET92S-05-014-01Sheet 13 of 70 Sheets FCC ID. : QW3-BT111FTT06 Rev. No 1.0 c) Channel 78 Operation Mode: Receiving / Transmitting Fundamental Frequency : 2480 MHz Test Date : May 23, 2003Temperature : 24 Humidity : 65 % Frequency (MHz) Reading (dBuV) H V Peak Ave Peak Ave Factor (dB) Corr. Result @3m (dBuV/m) Peak Ave (H/V Max.) Limit @3m (dBuV/m) Peak Ave. Margin (dB) Table Deg. (Deg.) Ant. High (m) 1240.000---------------------74.054.0--------- 3720.000---------------------74.054.0--------- 4960.000---------------------74.054.0--------- 7440.000---------------------74.054.0--------- 9920.000---------------------74.054.0--------- 12400.000---------------------74.054.0--------- 14880.000---------------------74.054.0--------- 17360.000---------------------74.054.0--------- 19840.000---------------------74.054.0--------- 22320.000---------------------74.054.0--------- 24800.000---------------------74.054.0--------- Note : 1. Item of margin shown in above table refer to average limit. 2. Remark “---” means that the emissions level is too low to be measured. 3. Item “Margin” referred to Average limit while there is only peak result. 4. The radiation emissions have been measured to beyond the tenth harmonic of the fundamenta frequency and show the significant frequencies, other means the value is too low to be detected.

ETC Report No. : ET92S-05-014-01Sheet 50 of 70 Sheets FCC ID. : QW3-BT111FTT06 Rev. No 1.0 10.4 Radiated Emission Data a) Channel 0 Operation Mode: Receiving /Transmitting Fundamental Frequency : 2402 MHz Test Date : May 23, 2003Temperature : 24 Humidity : 65 % Frequency (MHz) Reading (dBuV) H V Peak Ave Peak Ave Factor (dB) Corr. Result @3m (dBuV/m) Peak Ave (H/V Max.) Limit @3m (dBuV/m) Peak Ave. Margin (dB) (H/V Max) Table Deg. (Deg.) Ant. High (m) 2390.00050.3---50.8----2.148.7---74.054.0-5.31801.0 2483.50059.0---56.049.3-1.757.347.674.054.0-6.401.0 b) Channel 39 Operation Mode: Receiving / Transmitting Fundamental Frequency : 2441MHz Test Date : May 23, 2003Temperature : 24 Humidity : 65 % Frequency (MHz) Reading (dBuV) H V Peak Ave Peak Ave Factor (dB) Corr. Result @3m (dBuV/m) Peak Ave (H/V Max.) Limit @3m (dBuV/m) Peak Ave. Margin (dB) (H/V Max) Table Deg. (Deg.) Ant. High (m) 2383.00050.2---50.3----2.148.2---74.054.0-5.81801.0 2483.50058.7---56.248.8-1.756.047.174.054.0-6.93601.0 c) Channel 78 Operation Mode: Receiving / Transmitting Fundamental Frequency : 2480 MHz Test Date : May 23, 2003Temperature : 24 Humidity : 65 % Frequency (MHz) Reading (dBuV) H V Peak Ave Peak Ave Factor (dB) Corr. Result @3m (dBuV/m) Peak Ave (H/V Max.) Limit @3m (dBuV/m) Peak Ave. Margin (dB) (H/V Max) Table Deg. (Deg.) Ant. High (m) 2390.00050.4---51.0----2.148.9---74.054.0-5.11801.0 2483.50058.7---56.049.1-1.757.047.474.054.0-6.601.0