QW3-BTCA01Bluetooth USB Adapter

1 Bluetooth Software’s installation manual Rev. 1.0 You can follow these instructions to install the Bluetooth software for your Bluetooth Adapter. Note: 1. You should install the Widcomm’s Bluetooth Software for Windows (BTW) before you use the Bluetooth Adapter. 2. The version of BTW software in this CD is BTW1.4.2. 3. Each Bluetooth Adapter has its own Bluetooth Device Address (BD address), and also each BTW has its own Security Key (i.e. Security Code), corresponding to your Bluetooth Adapter. 4. We strongly recommend you to install Bluetooth software by using the security key number on the label instead of via the Internet. ＊＊ The security key (S.K.) number and BD address (B.D.) is on the label on your Bluetooth Adapter 1. Start 1.1 You will see the following screen when you plug your Bluetooth Adapter into the USB slot in your computer. Click “Cancel” to skip the driver installation of ”Found New Hardware Wizard of Windows”. 2. Installing from a CD Installing BTW software is an automated process made easy by the use of the InstallShield Wizard. You will need to: 2.1 Exit all applications. 2.2 Insert the CD, the main menu of software will show up automatically. Please click “Install” icon on the CD. 2 NOTE: Any previous version of BTW software will be uninstalled when installing this BTW 1.4.2 version. Or you can uninstall BTW manually by using the Add/Remove Programs window in the Control Panel. 2.3 Automatically execute BTW and you will go to the following screen. When the Welcome screen appears, Click “Next” to continue. 2.3.1 Choose “I accept the terms in the license agreement” and Click “Next” to continue. 2.3.2 Select the destination directory you prefer, then click “Next” button 3 2.3.3 Click “Install” to begin the installation. 2.3.4 The status bar will display your progress. 2.3.5 Click “OK” to continue installation. 4 Note: For Windows 98 users, a window appears which asks you to insert the Windows 98 CD-Rom. Insert the original Windows 98 CD Rom and click “OK”. The "Bluetooth device not found" window appears. Insert the USB Bluetooth adapter in the USB port. Click "OK". 2.3.6 Click “Finish” to compete the installation. Reboot your computer, you can begin to use Bluetooth software (BTW1.4.2). Note: If you have any installation problem, please refer to the following Troubleshooting section. FCC Statement The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. User Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. To comply with FCC RF exposure requirement, this device and its antenna must be co-located or operating in the conjunction with any other antenna or transmitter.

REPORT NO: ER/2004/20018 ID: QW3-BTCA01DATE: Feb. 17, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 1361 t (886-2) 2299-3939f (886-2) 2298-2698www.sgs.com.tw ILAC MRA APPENDIX 2 EXTERNAL OF EUT REPORT NO: ER/2004/20018 ID: QW3-BTCA01DATE: Feb. 17, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 1361 t (886-2) 2299-3939f (886-2) 2298-2698www.sgs.com.tw ILAC MRA Front View of EUT Back View of EUT

FCC ID LABEL FORMAT AND LOCATION Applicant:Formosa Teletek Corporation FCC ID:QW3-BTCA01 FCC ID: QW3-BTCA01 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID LABEL AREA

REPORT NO: ER/2004/20018 ID: QW3-BTCA01DATE: Feb. 17, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 1361 t (886-2) 2299-3939f (886-2) 2298-2698www.sgs.com.tw ILAC MRA APPENDIX 3 INTERNAL OF EUT REPORT NO: ER/2004/20018 ID: QW3-BTCA01DATE: Feb. 17, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 1361 t (886-2) 2299-3939f (886-2) 2298-2698www.sgs.com.tw ILAC MRA Internal of EUT Internal of EUT REPORT NO: ER/2004/20018 ID: QW3-BTCA01DATE: Feb. 17, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 1361 t (886-2) 2299-3939f (886-2) 2298-2698www.sgs.com.tw ILAC MRA Internal of EUT

REPORT NO: ER/2004/20018 ID: QW3-BTCA01 DATE: Feb. 17, 2004 Page: 1 of 48 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路136之1號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Product name: Bluetooth USB Adapter Brand Name: N/A Model Name: FB-CA01 FCC ID: QW3-BTCA01 REPORT NO: ER/2004/20018 ISSUE DATE: Feb. 17, 2004 FCC Rule Part: §15.247 Prepared for Formosa Teletek Corporation 358, Huaya 2 nd Rd., Gueishan shiang, Taoyuan, Taiwan, R.O.C. Prepared by SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei County, Taiwan. Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This document may be altered or revised by SGS Taiwan Ltd. personnel only, and shall be noted in the revision section of the document. REPORT NO: ER/2004/20018 ID: QW3-BTCA01 DATE: Feb. 17, 2004 Page: 2 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路136之1號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA VERIFICATION OF COMPLIANCE Applicant: Formosa Teletek Corporation 358, Huaya 2 nd Rd., Gueishan shiang, Taoyuan, Taiwan, R.O.C. Equipment Under Test: Bluetooth USB Adapter BRAND NAME: N/A FCC ID Number: QW3-BTCA01 MODEL No.: FB-CA01 Model Difference: N/A File Number: ER/2004/20018 Date of test: Feb. 10, 2004 ~ Feb. 13, 2004 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. The test data, data evaluation, test proce- dures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (1992) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247 The test results of this report relate only to the tested sample identified in this report. Test By: Date Feb. 17, 2004 Alex Hsieh Approved By Date Feb. 17, 2004 Vincent Su REPORT NO: ER/2004/20018 ID: QW3-BTCA01 DATE: Feb. 17, 2004 Page: 3 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 台北縣五股工業區五工路136之1號 台灣檢驗科技股份有限公司 t (886-2) 2299-3939 f (886-2) 2298-2698 www.sgs.com.tw 0513 ILAC MRA Table of Contents 1. GENERAL INFORMATION .........................................................................................................5 1.1. Product Description ............................................................................................................................5 1.2. Related Submittal(s) / Grant (s) ..........................................................................................................5 1.3. Test Methodology ...............................................................................................................................5 1.4. Test Facility.........................................................................................................................................5 1.5. Special Accessories .............................................................................................................................5 1.6. Equipment Modifications....................................................................................................................5 2. SYSTEM TEST CONFIGURATION ............................................................................................6 2.1. EUT Configuration .............................................................................................................................6 2.2. EUT Exercise ......................................................................................................................................6 2.3. Test Procedure.....................................................................................................................................6 2.4. Configuration of Tested System..........................................................................................................7 3. SUMMARY OF TEST RESULTS .................................................................................................8 4. DESCRIPTION OF TEST MODES ..............................................................................................8 5. CONDUCTED EMISSION TEST (Not applicable for this product) .........................................9 5.1. Standard Applicable ............................................................................................................................9 5.2. EUT Setup...........................................................................................................................................9 5.3. Measurement Procedure......................................................................................................................9 5.4. Measurement Equipment Used: ........................................................................................................10 5.5. Measurement Result..........................................................................................................................10 6. PEAK OUTPUT POWER MEASUREMENT............................................................................13 6.1. Standard A…

Text truncated - open the document above for the full version.

REPORT NO: ER/2004/20018 ID: QW3-BTCA01DATE: Feb. 17, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 1361 t (886-2) 2299-3939f (886-2) 2298-2698www.sgs.com.tw ILAC MRA APPENDIX 1 PHOTOGRPHS OF SET UP REPORT NO: ER/2004/20018 ID: QW3-BTCA01DATE: Feb. 17, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 1361 t (886-2) 2299-3939f (886-2) 2298-2698www.sgs.com.tw ILAC MRA Radiated Emission Set up Photos REPORT NO: ER/2004/20018 ID: QW3-BTCA01DATE: Feb. 17, 2004 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without prior written permission of the Company. SGS Taiwan Ltd. No. 134, Wu Kung Rd., Wuku Industrial Zone, Taipei Country, Taiwan. / 1361 t (886-2) 2299-3939f (886-2) 2298-2698www.sgs.com.tw ILAC MRA Conducted Emission Setup Photos