FCCID.CO- FCC ID Database
HomeCompaniesEquipment ClassesSearch

Ā© 2026 FCC ID Database. All rights reserved.

AboutContactData sourced from FCC public records
  1. Home/
  2. Cenix Digicom Co., Ltd/
  3. QW6MFDU03

QW6MFDU03MP3 PLAYER

Cenix Digicom Co., Ltd
MP3 PLAYER - FCC ID QW6MFDU03 - Cenix Digicom Co., Ltd
Click to zoom

Application Details

Equipment Class
JBP - Part 15 Class B Computing Device Peripheral
Date of Grant
Dec 22, 2005
Application Purpose
Original Equipment
Date of Application
Dec 22, 2005
Equipment Note
MP3 PLAYER
Company
Cenix Digicom Co., Ltd
Country
South Korea

Documents & Files

Select a file to view

Users Manual

↗
↗
↗

Block Diagram

↗

External Photos

↗

ID Label/Location Info

↗
↗

Internal Photos

↗

Test Report

↗

Test Setup Photos

↗

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

40 39

Users Manual

THI SDEVICE COMPLIE SWITH PART 15 OF THE FCC RULE S.OPERATION I S SUBJECT TO THE FOLLOWING TWO CONDITION S:(1) THI SDEVICE SMAY NOT CAU SE HARMFUL INTERFERENCE, AND(2) THI SDEVICE MU ST ACCEPT ANY INTERFERENCE, RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIREDOPERATION. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation.This equipment generates, uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one ormore of the following measures : - Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.NOTE : THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZEDMODIFICATION STO THI SEQUIPMENT. SUCH MODIFICATION SCOULD VOID THE USER'S AUTHORITY TO OPERATE THEEQUIPMENT. 1

Block Diagram

GMP-M6 BLOCK DIAGRA M 2" TFT LCD (QCIF) NAND FLASH ( IC201 ) LTC3455 ( DUAL STEP-DN with Charge Circuit ) USB8P ( JACK601 ) DC3.7V WM8750L ( IC401 ) 12 M Hz ( XT101 ) EAR_JACK SPK VBAT . TCC767 ( IC101 ) MIC RTC (PCF8563) CAT3604 (WHITE LED DRIVER) USB 2.0 KEY BLOCK LINE IN IIC_Ctrl 3.7 V Li- SDRAM ( IC202 ) FM_MODULE 32768Hz ( XT102 ) VBUS_Charge

ID Label/Location Info

MP3 PLAYER Model Name: GMP-M6G FCC ID: QW6GMP-M6G

Test Report

Emission of electromagnetic disturbance Test Report No. : ERI-FCC05-0050 Equipment : : MP3 PLAYER Name of basic model : GMP-M6G Family model : GMP-M6H, GMP-M6F, GMP-M6I Manufacturer : CENIX DIGICOM CO., LTD Applicant : CENIX DIGICOM CO., LTD Date of receipt EUT : Nov 29, 2005. Tested date : Nov 30, 2005 . ~ Dec 01, 2005. Issued date : Dec 12, 2005. Test results : PASS Test Standards : FCC Part 15 Subpart B (Class B) / Class B digital devices, peripherals EMC Research Institute President DEC 12, 2005 EMC Research InstituteFile No. ERI-FCC05-0050 CONTENTS 1. CLIENT INFORMATION 2. LABORATORY INFORMATION 3. EQUIPMENT UNDER TEST INFORMATION(EUT) 3.1 Identification of the EUT 3.2 Additional information about the EUT 3.3 Peripheral equipment 4. TEST SPECIFICATIONS 4.1 Standards 5. TEST RESULTS SUMMARY 5.1 Test results 5.2 Measurement uncertainty 6 TEST RESULTS 6.1 CONTINUOUS DISTURBANCE VOLTAGE, MAIN TERMINAL 6.1.1 Operating environment 6.1.2 Test set-up and test procedures 6.1.3 Test instrument 6.1.4 Test results 6.2 RADIATED DISTURBANCE : 30MHz – 1000MHz 6.2.1 Operating environment 6.2.2 Test set-up 6.2.3 Test conditions 6.2.4 Test instrument 6.2.5 Test results 7. PRODURCT PHOTOGRAPHS 7.1 Front Photograph of EUT 7.2 Rear Photograph of EUT Appendix (None) EMC Research InstituteFile No. ERI-FCC05-0050 1. CLIENT INFORMATION The EUT has been tested by request of : Company : CENIX DIGICOM CO., LTD Address : Name of contact : Park, Keun Woo +82-31-245-2900 +82-31-251-6425 2. LABORATORY INFORMATION The 10m semi-anechoic chamber and/or EMC facilities are used for these testing. These facilities were accredited by KOLAS, EK, MIC of Korea, FCC of USA. and VCCI of Japan. Address ELECTROMAGNETIC RESEARCH INSTITUTE. 66-6, Jeil-ri, Yangji-myun, Youngin-si, Gyeonggi-do, Korea. Telephone No. : +82-31-336-1186~7 Facsimile No. : +82-31-336-1184 Registered No. KOLAS : 111 EK : J MIC : KR0030 FCC Filing No. : 302567 VCCI Reg. No. : C-2363, R-2183 3. EQUIPMENT UNDER TEST INFORMATION(EUT) 3.1 Identification of the EUT Type of equipment: USB Flash Drive MP3 Plyer Manufacturer : CENIX DIGICOM CO., LTD Address : #584-4 PAJANG-DONG, JANGAN-KU, SUWON-CITY, -DO, KOREA Telephone : +82-31-245-2900 Facsimile : +82-31-251-6425 Power Rating: : DC 3.7 V Country of origin : KOREA EMC Research InstituteFile No. ERI-FCC05-0050 3.2 Additional information about the EUT Class B, Family Models List: Basic Model Family Model Different Point GMP-M6H Model name & Memory size(1 Gbyte) GMP-M6F Model name & Memory size(256 Mbyte) GMP-M6G GMP-M6I Model name & Memory size(2 Gbyte) 3.3 Peripheral equipment Equipment needed for correct operation of the EUT is given below. Description Model No. Serial No. Manufacture Earphone - - - 4. TEST SPECIFICATIONS 4.1 Standards The standard for a EUT is given below. FCC Part 15 Subpart B (Class B) /Other Class B digital devices & peripherals EMC Research InstituteFile No. ERI-FCC05-0050 5. TEST RESULTS SUMMARY 5.1 Test Results Standards Test items / Frequency Result ANSI C63.4- 1992 1. Main Terminal disturbance voltage : 150 kHz – 30 MHz Pass ANSI C63.4- 1992 2. Radiated disturbance : 30 MHz – 1000 MHz Pass 5.2 Measurement Uncertainty Although the measured emissions indicate that the EUT complies with required limits, some measurements are close to these limits. When the uncertainty of measurement is considered, there is some possibility that the EUT may not be compliant Compliance or non-compliance with a disturbance limit shall be determined in the following manner. If U lab is less than or equal to U cispr - compliance is deemed to occur if no measured disturbance exceeds the disturbance limit; - non-compliance is deemed to occur if any measured disturbance exceeds the disturbance limit If U lab is greater than U cispr - compliance is deemed to occur if no measured disturbance, increased by (U lab -U cispr ), exceeds the disturbance limit; - non-compliance is deemed to occur if any measured disturbance, increased by (U lab - U cispr ), exceeds the disturbance limit; z Measurement uncertainty for Test Items - Conducted disturbance(150 kHz ~ 30 MHz) : ± 3.0 dB(k=2) - Radiated disturbance( 30 MHz ~ 300 MHz) : ± 4.6 dB(k=2) - Radiated disturbance ( 300 MHz ~ 1 000 MHz) : ± 4.7 dB(k=2) EMC Research InstituteFile No. ERI-FCC05-0050 6, TEST RESULTS 6.1 CONTINUOUS DISTURBANCE VOLTAGE, MAIN TERMINAL : Frequency range 0.15 MHz to 30 MHz 6.1.1 Operating environment Temperature : 23.0 ± 0.7 Relative Humidity : 32.0 % ± 4.5 % Atmospheric pressure : 1 001 hpa ± 0.25 hpa Test location : Shield room 6.1.2 Test set-up and test procedures - Photograph - EMC Research InstituteFile No. ERI-FCC05-0050 The EUT was connected to an artificial mains network (LISN) placed on the floor. The EUT was placed on non-metallic table 0.8m above the metallic, grounded floor. The distance to other metallic surface was 0.8 m. Amplitude measurements were performed with a quasi- peak detector and an average detector. Operation condition: Within this test report, EUT was tested under operation mode of Data transmitting with PC Via USB port and tested under rated USB voltage. When the EUT is in the mode of data transmitting with the PC, the EUT is connected with the PC USB port make use of USB cable. 6.13 Test instrument Instrument Model No Serial No. Makers Range (MHz) Next cal.date Used Test receiver ESCS30 100021 R&S 0.009 ~ 2 750 2006. 2. 6 O ESH3-Z5 827246/008 R&S 0.009 ~ 30 2006. 3. 31 O L.I.S.N. ESH3-Z5 831887/018 R&S - 2006. 3. 31 Shield room 8 Ɨ 6 Ɨ 3.3m/H - - - - O 6.1.4 Test results Date of test: Dec 01, 2005 An overview sweep performed with the peak detector & the average detector was included in the report as test reports. EMC Research InstituteFile No. ERI-FCC05-0050 [Live line] EMC Research InstituteFile No. ERI-FCC05-0050 [Neutral line] Comments: All over frequencies had found below specified limits of this standard. EMC Research InstituteFile No. ERI-FCC05-0050 6.2 RADIATED DISTURBANCE : 30 MHz – 1 000 MHz 6.2.1 Operating e…

Text truncated - open the document above for the full version.

Contact Information

Applicant

Gi - Yeon Lee(Researcher)
[email protected]82-31-245-2900Fax: 82-31-251-6425

Test Firm

EMC Compliance LTDMin Seok Chung
[email protected]82-31-336-9919Fax: 82-31-336-4767

Technical Specifications

#Rule PartsFrequency RangePower Output
115B--

Other Applications from Cenix Digicom Co., Ltd

DIGITAL AUDIO PLAYER - FCC ID QW6MP-510F - Cenix Digicom Co., Ltd
QW6MP-510F

DIGITAL AUDIO PLAYER

May 08, 2005

Equipment Class

JBP - Part 15 Class B Computing Device Peripheral
MP3 PLAYER - FCC ID QW6MP-430TH - Cenix Digicom Co., Ltd
QW6MP-430TH

MP3 PLAYER

Aug 29, 2004

Equipment Class

JBP - Part 15 Class B Computing Device Peripheral
MP3 Player - FCC ID QW6MR-L900 - Cenix Digicom Co., Ltd
QW6MR-L900

MP3 Player

Apr 15, 2004

Equipment Class

JBP - Part 15 Class B Computing Device Peripheral
DIGITAL VOICE RECORDER - FCC ID QW6WVR175 - Cenix Digicom Co., Ltd
QW6WVR175

DIGITAL VOICE RECORDER

Jan 13, 2004

Equipment Class

JBP - Part 15 Class B Computing Device Peripheral
DIGITAL VOICE RECORDER - FCC ID QW6WVR165 - Cenix Digicom Co., Ltd
QW6WVR165

DIGITAL VOICE RECORDER

Jan 13, 2004

Equipment Class

JBP - Part 15 Class B Computing Device Peripheral