QYM-MID2Monitor Interface Device

PJ 10/02/11 V3.0 Page 1 of 6 Serco in Confidence SERCO GEOGRAFIX LIMITED (1) and (Insert company name) (2) ______________________________ Mutual Non-Disclosure Agreement ______________________________ PJ 10/02/11 V3.0 Page 2 of 6 Serco in Confidence MUTUAL NON-DISCLOSURE AGREEMENT THIS AGREEMENT is made the (xx) the day of (enter month) 2014 Between Serco Geografix Limited, of Serco House, 16 Bartley Wood Business Park, Bartley Way, Hook, Hampshire, RG27 9UY ("Serco") and Insert name and address of (“Supplier”) RECITALS (A) Serco and the Supplier wishes to disclose to the other certain of its proprietary information which may include operations, processes, plans, customer details, trade secrets, business affairs, formulae, software programs, know-how, test results, design rights, drawings, models, photographs, sketches and specifications and which is considered proprietary by the Disclosing Party; and (B) Serco and the Supplier wish to exchange each other’s aforementioned proprietary information solely for the Purpose; and (C) Serco and the Supplier wish to protect the disclosure of the Confidential Information on the terms and conditions of this Agreement. The parties agree as follows: 1. INTERPRETATIONS AND DEFINITIONS 1.1 In this Agreement, the defined terms shall have the following meanings:- 1.1.1 “Confidential Information” means the terms and conditions of this Agreement, the existence of the discussions between the parties, and any other information concerning the Purpose, including but not limited to, information regarding each party’s product plans, product designs, product costs, product prices, finances, marketing plans, business opportunities, personnel research and development activities, know-how and pre-release products. Information disclosed orally or printed shall be considered Confidential Information by both “Disclosing Party” and “Receiving Party” unless otherwise stated at the time of disclosure. Confidential Information disclosed to the Receiving Party by any affiliate or agent of the Disclosing Party will be treated as being subject to the terms of this Agreement. Information disclosed by a party relating to the activities or operations of a Group Company shall also be Confidential Information. 1.1.2 “Disclosing Party” means a party to this Agreement that discloses Confidential Information. 1.1.3 “Group Company” means the ultimate parent company of a party together with all subsidiary companies of that ultimate parent company. For the purposes of this definition, “Parent Company” and “Subsidiary Company” shall have the meaning ascribed to them by the Companies Act 1985. PJ 10/02/11 V3.0 Page 3 of 6 Serco in Confidence 1.1.4 “Purpose” means the Parties are considering a business relationship in connection with the supply or receipt of electronic monitoring equipment. 1.1.5 “Receiving Party” means a party to this Agreement that receives Confidential Information. 2. DISCLOSURE 2.1 In consideration of the mutual exchange and disclosure of Confidential Information pursuant to the Purpose the Receiving Party agrees with the Disclosing Party that for a period of three (3) years from the date of this Agreement, it shall take all reasonable steps to prevent disclosure of such Confidential Information it receives from the Disclosing Party to any third parties except as expressly agreed in writing by the Disclosing Party and only to those of the Receiving Party's employees who have an absolute need to know in connection with the Purpose, provided that in relation to the disclosure of Confidential Information to agreed third parties or employees of the Receiving Party only: (a) any such Confidential Information is clearly marked Confidential or Proprietary, or designated as Confidential or Proprietary by appropriate statements, markings or notices; (b) use of such Confidential Information is restricted to the Purpose; (c) such employees shall be party to a non-disclosure agreement or non- disclosure covenants with the Receiving Party. 3. STANDARD OF CARE 3.1 The Receiving Party shall use at least the same degree of care to avoid disclosure of the Confidential Information as it employs with respect to its own confidential/proprietary information. 4. EXCEPTIONS TO CONFIDENTIAL INFORMATION 4.1 The Disclosing Party agrees that the Receiving Party shall have no obligation with respect to any such Confidential Information which: 4.1.1 is known at the date of disclosure or becomes publicly known through no wrongful act or breach of this Agreement by the Receiving Party; or 4.1.2 is rightfully received from a third party without similar restriction and without breach of this Agreement; or 4.1.3 is independently developed by the Receiving Party without breach of this Agreement and such development can be shown by documentary evidence; or PJ 10/02/11 V3.0 Page 4 of 6 Serco in Confidence 4.1.4 is furnished to a third party by the Disclosing Party without a similar restriction on the third party's rights; or 4.1.5 is disclosed where necessary to do so by law or request of a governmental agency (in such instance, the Receiving Party shall first give the Disclosing Party notice of such request and the opportunity to oppose such disclosure or obtain a protective order at its own cost); or 4.1.6 relates to general concepts of computer hardware and software technology. 5. THIRD PARTY RIGHTS 5.1 Each of Serco and the Customer agree and recognise that Confidential Information may include information in which the proprietary interest is held by a Group Company. The Contracts (Rights of Third Parties) Act 1999 shall apply to this Agreement so that a Group Company may enforce all rights of a Disclosing Party as if it were a party to this Agreement, in relation to the disclosure and use of proprietary Confidential Information of that Group Company. 6. NO LICENCES 6.1 Each party shall retain all right, title and interest to that party’s Confidential Information. Nothing contained in this Agreement sh…

Text truncated - open the document above for the full version.

Serco in Confidence MID2 EXTERNAL PHOTOS Document Title MID2 External Photos Serco in Confidence 1 EXTERNAL PHOTOS MID2 EXTERNAL PHOTO #1 - Front Document Title MID2 External Photos Serco in Confidence MID2 EXTERNAL PHOTO #2 - Back

Serco in Confidence ss MID2 REAR LABEL DETAIL Document Title MID2 Rear Label Detail Serco in Confidence 1 MID2 REAR LABEL DETAILS Label Dimensions: 30mm x 18mm (ID Text: 2mm) Label Material: Laser-engraved into plastic base of device. LABEL POSITION

RF Exposure Exclusion. FCC ID: QYM-MID2 contains two transmitters which may transmit simultaneously, one of which has prior approval as an RF module for installation in mobile devices (20cm separation). The combined device is for portable (hand-held) use and therefore the combined RF Exposure stand alone SARs are considered against the exclusion requirements of KDB 447498 for extremities. KDB 447498 4.3.2, 2): max power of channel (mW) / min separation distance (mm) . √frequency (GHz) / x; where x = 18.75 for 10g SAR (extremities). Bluetooth: 2/5 . √2.48 / 18.75 = 0.034 15.249: 2/5 . √0.915 / 18.75 = 0.010 Total: 0.034 + 0.010 = 0.044. The total is less than the 7.5 exclusion threshold for 10g extremity SAR & therefore no tests are required.

FCC 47CFR part 15C Test Report For Monitor Interface Device (MID) MID2 Reference Standard: FCC 47CFR part 15C Manufacturer: Serco Geografix Ltd For type of equipment and serial number, refer to section 3 Report Number: 08-7047-4-13 Issue 02 Supersedes report no. 08-7047-4-13 Issue 01 Report Produced by: - R.N. Electronics Ltd. 1 Arnolds Court Arnolds Farm Lane Mountnessing Essex CM13 1UT U.K. www.RNelectronics.com Telephone +44 (0) 1277 352219 Email [email protected] 2013 RN ELECTRONICS LIMITED REPORT NUMBER 08-7047-4-13 ISSUE 02 ALL RIGHTS RESERVED File name SERCO 7047-4.DOCX The contents of this report, apart from the referenced ANSI C63.4-2003, are beyond the scope of UKAS Testing Laboratory No. 2360 accreditation. QMF21J – 4; 47CFR15.249, RNE ISSUE 01 AUG 2013 PAGE 2 OF 45 Arnolds Court, Arnolds Farm Lane, Mountnessing, Brentwood Essex, CM13 1UT Certificate of Test 7047-4 The unit noted below has been tested by R.N. Electronics Limited and, where appropriate, conforms to the relevant subpart of FCC 47CFR Part 15. This is a certificate of test only and should not be confused with an equipment authorisation. Other standards may also apply. Equipment: Monitor Interface Device (MID) Model Number: MID2 Proposed FCC ID: Not stated Unique Serial Number: 916 Manufacturer: Serco Geografix Ltd Hurricane Way Norwich NR6 6EW Full measurement results are detailed in Report Number: 08-7047-4-13 Issue 02 Test Standards: FCC 47CFR Part 15.249 effective date October 1 st 2011, Class DXT Intentional Radiator DEVIATIONS: No deviations from the standards have been applied.. This certificate relates only to the unit tested as identified by a unique serial number and in the condition at the time it was tested. It does not relate to any other similar equipment and performance of the product before or after the test cannot be guaranteed. Whilst every effort is made to assure quality of testing, type tests are not exhaustive and although no non-conformances may be found, this doesn't exclude the possibility of unit not meeting the intentions of the standard or the requirements of the Federal Regulations, particularly under different conditions to those during testing. Any compliance statements are made reliant on (a) the application of the product and use of the assigned band being acceptable to the FCC and (b) the modes of operation as instructed to us by the Customer based on their specific knowledge of the application and functionality of the EUT. Statements of compliance, where measurements were made, do not include the measurement uncertainty. The measurement uncertainty, where stated, is the expanded uncertainty based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95%. Date of Test: 17 th July 2013 – 27 th August 2013 Test Engineer: Graham Blake Approved By: Technical Director Customer Representative 2013 RN ELECTRONICS LIMITED REPORT NUMBER 08-7047-4-13 ISSUE 02 ALL RIGHTS RESERVED File name SERCO 7047-4.DOCX The contents of this report, apart from the referenced ANSI C63.4-2003, are beyond the scope of UKAS Testing Laboratory No. 2360 accreditation. QMF21J – 4; 47CFR15.249, RNE ISSUE 01 AUG 2013 PAGE 3 OF 45 1 Contents 1 Contents .............................................................................................................. 3 2 Equipment Under Test (EUT) ............................................................................... 4 2.1 Equipment Specification ....................................................................................... 4 2.2 EUT Configurations for testing .............................................................................. 5 2.3 Functional Description .......................................................................................... 5 2.4 EUT Modes .......................................................................................................... 5 2.5 Emissions Configuration ....................................................................................... 6 3 Summary of test results ........................................................................................ 7 4 Specifications ....................................................................................................... 8 4.1 Deviations ............................................................................................................ 8 4.2 Tests at Extremes of Temperature & Voltage ........................................................ 8 4.3 Measurement Uncertainties .................................................................................. 8 5 Tests, Methods and Results ................................................................................. 9 5.1 AC power line conducted emissions ..................................................................... 9 5.2 Intentional radiator field strength ......................................................................... 11 5.3 Radiated emissions ............................................................................................ 13 5.4 Frequency stability ............................................................................................. 16 5.5 Occupied bandwidth ........................................................................................... 17 5.6 Band Edge ......................................................................................................... 18 5.7 Duty cycle .......................................................................................................... 18 6 Plots and Results ............................................................................................... 19 6.1 AC power line conducted emissions plots ........................................................... 19 6.2 Intentional radiator field strength plots ................................................................ 22 6.3 Radiated emissions plots ............................…

Text truncated - open the document above for the full version.

Test Set-Up Photos