R2MHI-CALLBluetooth Headset

hi‐call User manal FCC ID: R2MHI‐CALL Function: Bluetooth Headphone 1 Function Button Button S1 : 1. To accept a call press briefly the button S1. To end a call press briefly the button S1 during the call. To reject an incoming call hold the button S1 fo r1 second, then release the button.The incoming call is rejected . 2. Press twice (double click) the button S1 to call the last selected number. 3. To activate voice dialing /voiceouer /Siri hold the button S1 for 3 seconds from the hi‐call; then you can pronounce the command. Button S2 : 1. To switch on / off hi‐call hold the button S2 for 3 seconds. 2. set in pairing mode hold the button S2 for 5 seconds. 2/ LED Indicator ①Indication RED LED : 1)the LED turns on red‐‐‐‐‐Charging state 2)indication LED starts flashing red‐‐‐‐‐Low Voltage ②Indication BLUE LED : 1) the indication LED flashed alternately red and blue ‐‐‐‐‐ (1) Pair hi‐call with a compatible device; (2) incoming call 2) indication LED starts flashing blue slowly every 6 seconds ‐‐‐‐‐the device is paired 3) indication LED flashes alternately red and blue‐‐‐‐‐ set in pairing mode 3. Input Charging Voltage : DC5V Charge time : 1‐2 hours 4. Working time : 5‐8 hours IMPORTANT REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Nov.12, 2012 Federal Communication Commission Authorization and Evaluation Division FCC ID: R2MHI-CALL Re: Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1: Block Diagram 2: Circuit Diagram 3: Operational Description 4: Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rules 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, AVLINK INDUSTRIAL CO., LTD Contact Person: Charles Lau

PHOTOGRAPHS OF THE EUT PART VIEW-1 OF EUT PART VIEW-2 OF EUT PART VIEW-3 OF EUT PART VIEW-4 OF EUT PART VIEW-5 OF EUT PART VIEW-6 OF EUT

FCC Label Location Bluetooth Headset Model Name: hi‐Call FCC ID: R2MHI‐CALL

INTERNAL VIEW OF PCB FRONT VIEW OF PCB Bluetooth Antenna BACK VIEW OF PCB

FCC Test Report Report No.: AGC23K121005‐1F2 FCC ID : R2MHI‐CALL PRODUCT DESIGNATION : Bluetooth Headset BRAND NAME : N/A TEST MODEL : hi‐Call CLIENT : AVLINK INDUSTRIAL CO., LTD DATE OF ISSUE : Nov.07,2012 STANDARD(S) : FCC Part 15 Rules REPORT VERSION : V1.0 Attestation of Global Compliance Co., Ltd. CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC23K121005-1F2 Page 1 of 42 VERIFICATION OF COMPLIANCE Applicant AVLINK INDUSTRIAL CO., LTD 7/F, A1 Bldg,Shuichanjingwan Industrial Area,Nanchang Village,Gushu,Bao'an Dist., Shenzhen,518216,P.R.China Manufacturer AVLINK INDUSTRIAL CO., LTD 7/F, A1 Bldg,Shuichanjingwan Industrial Area,Nanchang Village,Gushu,Bao'an Dist., Shenzhen,518216,P.R.China Product Designation Bluetooth Headset Brand Name N/A Model Name hi-Call FCC ID R2MHI-CALL Report Number AGC23K121005-1F2 Date of Test Nov.02, 2012 to Nov.07, 2012 WE HEREBY CERTIFY THAT: The above equipment was tested by Attestation of Global Compliance Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2003) and the energy emitted by the sample EUT tested as described in this report is in compliance with radiated emission limits of FCC Rules Part 15.247. Tested By: Jane Wu Nov.07, 2012 Reviewed By: Forrest Lei Nov.07, 2012 Approved By: Solger Zhang Nov.07, 2012 Report No.: AGC23K121005-1F2 Page 2 of 42 TABLE OF CONTENTS 1 GENERAL INFORMATION ..................................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION ........................................................................................................................................ 4 1.2 TABLE OF CARRIER FREQUENCYS .................................................................................................................... 4 1.3 RECEIVER INPUT BANDWIDTH ............................................................................................................................. 5 1.4 EXAMPLE OF A HOPPING SEQUENCY IN DATA MODE .................................................................................. 6 1.5 EQUALLY AVERAGE USE OF FREQUENCIES AND BEHAVIOUR ................................................................. 6 1.6 RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................................ 6 1.7 TEST METHODOLOGY ............................................................................................................................................. 6 1.8 TEST FACILITY ........................................................................................................................................................... 7 1.9 SPECIAL ACCESSORIES ......................................................................................................................................... 7 1.10 EQUIPMENT MODIFICATIONS ................................................................................................................................ 7 2 SYSTEM TEST CONFIGURATION ....................................................................................................................................... 8 2.1 CONFIGURATION OF TESTED SYSTEM .............................................................................................................. 8 2.2 EQUIPMENT USED IN TESTED SYSTEM ............................................................................................................. 8 3 SUMMARY OF TEST RESULTS ............................................................................................................................................ 9 4. DESCRIPTION OF TEST MODES ....................................................................................................................................... 9 5 PEAK OUTPUT POWER ....................................................................................................................................................... 10 5.1 MEASUREMENT PROCEDURE .................................................................................................................................. 10 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................................... 10 5.3 MEASUREMENT EQUIPMENT USED ........................................................................................................................ 11 5.4 LIMITS AND MEASUREMENT RESULT .................................................................................................................... 11 6 20 DB BANDWIDTH ............................................................................................................................................................. 12 6.1 MEASUREMENT PROCEDURE .................................................................................................................................. 12 6.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................................... 12 6.3 MEASUREMENT EQUIPMENT USED ........................................................................................................................ 12 6.4 LIMITS AND MEASUREMENT RESULTS .................................................................................................................. 12 7. CONDUCTED SPURIOUS EMISSION .............................................................................................................................. 14 7.1 MEASUREMENT PROCEDURE .................................................................................................................................. 14 7.2 TEST SET-UP (BLOCK DIAGRAM …

Text truncated - open the document above for the full version.

PHOTOGRAPHS OF THE TEST SETUP CONDUCTED EMISSION TEST RADIATED SPURIOUS EMISSION