R47F2M03GXLow power Bluetooth Multimedia Module with antenna

Rev: c Extended range Bluetooth™ Module - F2M03GX /GXA Datasheet Features • Fully qualified end product with Bluetooth™ v2.0+EDR, CE and FCC • Two antenna options: ƒ Integrated high output antenna (F2M03GXA) ƒ U.FL-connector for external ant. (F2M03GX) • Transmit power up to +19dBm • Range: up to 500m (line of sight) • Piconet and Scatternet capability, support for up to 7 slaves • Industrial temperature range -40 ° C to +85 ° C • USB v2.0 compliant • Extensive digital and analog I/O interface • PCM interface for up to 3 simultaneous voice channels • Large external memory for custom applications • Support for 802.11b/g Co-Existence • RoHS compliant Applications • Industrial and domestic appliances • Cable replacement • Medical systems • Automotive applications • Stand-alone sensors • Embedded systems • Cordless headsets • Computer peripherals (Mice, Keyboard, USB dongles, etc.) • Handheld, laptop and desktop computers www.free2move.net BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Free2move • Mobile phones General Description F2M03GX / GXA are Free2move’s top of the line embedded Bluetooth™ v2.0+EDR modules with exceptional wireless transmission characteristics. They provide a fully Bluetooth™ compliant device for data and voice communications. With a transmit power of up to +18dBm and a receiver sensibility of down to –92dBm the F2M03GX / GXA are suitable for the most demanding applications. Developers can easily implement a wireless solution into their product even with limited knowledge in Bluetooth™ and RF. The modules are fully Bluetooth™ v2.0+EDR qualified and are certified according to CE and FCC, which give fast and easy Plug-and-Go implementation and short time to market. The F2M03GXA comes with an on board highly efficient omni-directional antenna that simplifies the integration for a developers Bluetooth™ solution. RoHS COMPLIANT 2002/96/EC The F2M03GX has an U.FL-connector, which gives the possibility to use many external antenna alternatives to provide a flexibility of size, performance and designs. Rev: c Extended range Bluetooth™ Module - F2M03GX /GXA Datasheet © 2006 Free2move AB Page 2(44) Table of contents 1 Device pinout.........................................................................................................................3 2 Device terminal functions.....................................................................................................4 3 Electrical Characteristics......................................................................................................5 4 Radio Characteristics............................................................................................................7 5 Firmware versions.................................................................................................................8 5.1 Wireless UART............................................................................................................................. 10 5.2 HCI................................................................................................................................................ 15 6 Device terminal description................................................................................................18 6.1 UART Interface............................................................................................................................. 18 6.2 USB Interface................................................................................................................................20 6.3 Serial Peripheral Interface............................................................................................................ 24 6.4 I 2 C Interface.................................................................................................................................. 24 6.5 PCM.............................................................................................................................................. 25 6.6 PIOs.............................................................................................................................................. 32 6.7 Power supply................................................................................................................................33 7 Application information.......................................................................................................34 7.1 Recommended land pattern.......................................................................................................... 34 7.2 Layout guidelines.......................................................................................................................... 35 7.3 Typical application schematic....................................................................................................... 36 8 Package information............................................................................................................37 8.1 F2M03GX...................................................................................................................................... 37 8.2 F2M03GXA................................................................................................................................... 37 9 Certifications........................................................................................................................38 9.1 Bluetooth....................................................................................................................................... 38 9.2 CE................................................................................................................................................. 38 9.3 FCC............................................................................................................................................... 39 10 RoHS Statement................................................................…

Text truncated - open the document above for the full version.

Free2Move AB Sperlingsgatan 7 302 48 Halmstad Phone +46 35-15 22 60 Fax +46 35-15 22 69 Webbadress www.free2move.net Epost [email protected] Organisationsnr. 556587-0895 27.06.2007 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: We, the undersigned, hereby authorize ETS Product Service AG to act on our behalf in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out by ETS Product Service AG on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Signature Per-Arne Wiberg CEO Free2move AB

Date 27.06.2007 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request for Confidentiality Free2move FCC ID: R47F2M03GX FCC Part 15 Certification Gentlemen, In accordance with 0.459 of CFR 47, Free2move hereby requests confidentiality of all following attachments for the subject application. These documents contain detailed system and equipment description and related information about the product which Free2move considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evolve, Free2move considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, Signature Per-Arne Wiberg CEO Free2move Document name Confidentiality status F2M03GXA OpDes Confidential F2M03GXA BlkDia Confidential F2M03GXA Schem Confidential F2M03GXA PartsLst Confidential

03.07.2007 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request for limited modular approval Free2move AB FCC ID: R47F2M03GX FCC Part 15 Certification Gentlemen, Dear Application Examiner, the Free2move AB module FCC ID: R47F2M03GX is seeking FCC authorization as a limited modular transmitter. The requirements of the FCC Part 15.212 are met except from requirement 1 below. The following requirement is not fulfilled: 1. The modular transmitter must have its own RF shielding The radio portion of the module does not have its own RF shielding. The module is only to be installed by the our final products. We ensure RF exposure compliance when installed in end products. The following requirements are fulfilled: 2. The modular transmitter must have buffered modulation/data inputs The module has a memory management unit inside of the IC and external. It buffers the data inputs from UART and USB terminal. 3. The modular transmitter must have its own power supply regulation The IC contains an own voltage regulation. In case of changes in the supply voltage VCC (for example caused by temperature changes or other effects), the internal voltage will be stabilized. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204c The transmitter shall only be used with the tested integral antenna or with an antenna that has less antenna gain. Requirements for the use of external antennas are specified in Exhibit “Declaration_about_antenna_configurations” FCC ID: R47F2M03GX. 5. The modular transmitter must be tested in a stand-alone configuration The EUT was tested in a stand-alone configuration. The module was fixed in the Casira Development Kit of CSR (Cambridge Silicon Radio) during the test. See also test setup photos in test report (Exhibit Test Report FCC Part 15.247). For radiated measurements, the required distance of 10 cm was ensured by a special connector. 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. This modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible on the device in which it is installed. The FCC ID can be read from the UART of the device via the Windows Configuration Program. FCC ID R47F2M03GX This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The EUT is compliant with all applicable FCC rules. Detail instructions are given in the product Users Guide 8. The modular transmitter must comply with any applicable RF exposure requirements. The device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This OEM module is approved for use in products operating as mobile and portable transmitting device with respect to 2.1091 and 2.1093. This grant is valid only when the device is sold to OEM integrators. OEM manufacturers and OEM integrators are instructed to ensure that the end may not be provided with the module installation instructions. OEM integrators and End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Sincerely, Per-Arne Wiberg CEO Free2move AB

External (and internal) photos of F2M03GXA TOP BOTTOM FRONT REAR

Rev: c © 2006 Free2move AB Page 39(39) Extended range Bluetooth™ Module - F2M03GX /GXA Datasheet 9.3 FCC FCC-B Radio Frequency Interference Statement This deceive has been tested and found to comply with the limits for a Class-B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used according with the instruction manual, may cause harmful interference to radio communication. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Notice1 The changes or modifications not expressly approved by the party responsible for the compliance could void the user’s authority to operate the equipment. Notice 2 Shielded interface cables an A.C. power cord, if any, must be used in order to comply with the emission limits. Notice 3 This modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible on the device in which it is installed. The FCC ID can be read from the UART of the device. The FCC ID will be displayed in the Windows Configuration Program. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. FCC ID R47F2M03GX This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

External (and internal) photos of F2M03GXA TOP BOTTOM FRONT REAR

ETS PRODUCT SERVICE AG TEST - REPORT FCC RULES PARTS 15.247 IC RADIO STANDARDS RSS-210 Issue 6 FCC ID: R47F2M03GX Model Name: F2M03GXA Test report no.: G0M20703-1249-P-15 Certificate #1983.01 ETS STORKOWER STRASSE 38C, D-15526 REICHENWALDE B. BERLIN PRODUCT SERVICE AG PHONE +49-33631-888 00 FAX +49-33631-888 660 ETS Product Service AG Registration number: G0M20703-1249-P-15 Page 1 of 35 TABLE OF CONTENTS 1 General information 1.1 Notes 1.2 Testing laboratory 1.3 Details of approval holder 1.4 Application details 1.5 Test item 1.6 Test standards 2 Technical test 2.1 Summary of test results 2.2 Test environment 2.3 Test equipment utilized 2.4 General test procedure 2.5 Test results 3 Transmitter parameters 3.1 RF power output conducted 3.2 RF power output radiated (EIRP) 3.3 20 dB bandwidth 3.4 Time of occupancy (dwell time) 3.5 Number of hopping frequencies 3.6 Carrier frequency separation 3.7 Spurious emission conducted 3.8 Spurious emission radiated 3.9 Band-edge compliance 3.10 AC power line conducted emission 4 Receiver parameters 4.1 Radiated emission APPENDIX ETS Product Service AG Registration number: G0M20703-1249-P-15 Page 2 of 35 1 General information 1.1 Notes The purpose of conformity testing is to increase the probability of adherence to the essential requirements or conformity specifications, as appropriate. The complexity of the technical specifications, however, means that full and thorough testing is impractical for both technical and economic reasons. Furthermore, there is no guarantee that a test sample which has passed all the relevant tests conforms to a specification. Neither is there any guarantee that such a test sample will interwork with other genuinely open systems. The existence of the tests nevertheless provides the confidence that the test sample possesses the qualities as maintained and that is performance generally conforms to representative cases of communications equipment. The test results of this test report relate exclusively to the item tested as specified in 1.5. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the ETS PRODUCT SERVICE AG. Tester: 06.07.2007 W. Treffke Date ETS-Lab. Name Signature Technical responsibility for area of testing: 06.07.2007 N. Kaspar Date ETS Name Signature ETS Product Service AG Registration number: G0M20703-1249-P-15 Page 3 of 35 1.2 Testing laboratory 1.2.1 Location ETS PRODUCT SERVICE AG Storkower Straße 38c D-15526 Reichenwalde b. Berlin Germany Telephone : +49 33631 888 00 Telefax : +49 33631 888 660 1.2.2 Details of accreditation status A CCREDITED TESTING LABORATORY DAR-REGISTRATION NUMBER: DAT-P-201/96 ACCREDITED COMPETENT BODY BNETZA-REGISTRATION NUMBER: BNETZA-ZS-026/96 FCC FILED TEST LABORATORY: REG. NO. 96970 INDUSTRY CANADA FILED TEST LABORATORY R EG. NO.: IC 3470 A2LA ACCREDITED C ERTIFICATE NUMBER: #1983.01 B LUETOOTH QUALIFICATION TEST FACILITY (BQTF) ACCREDITED BY: BLUETOOTH QUALIFICATION REVIEW BOARD (BQRF) 1.3 Details of approval holder Name : Free2move AB Street : Sperlingsgatan 7 Town : 302 48 Halmstad Country : Sweden Telephone : +46 35-152260 Contact : Mr. Ulf Paulsson E-Mail : [email protected] ETS Product Service AG Registration number: G0M20703-1249-P-15 Page 4 of 35 1.4 Application details Date of receipt of application : 26.03.2007 Date of receipt of test item : 26.03.2007 Date of test : 27.03.2007 – 26.06.2007 1.5 Test item Description of test item : Extended range Bluetooth module with Antenna Type identification : F2M03GXA Serial number : without Photos : See annex A. Technical data Frequency band : 2.4 - 2.4835 GHz Frequency Ch A : 2402 MHz Frequency Ch B : 2441 MHz Frequency Ch C : 2480 MHz GFSK Transmitter Vnom Vnom –15 % Vnom +15 % Power (ch A) : Conducted: 14.09 dBm Conducted: 13.93 dBm Conducted: 14.36 dBm Power (ch B) : Conducted: 14.68 dBm Conducted: 14.48 dBm Conducted: 14.91 dBm Power (ch C) : Conducted: 14.28 dBm Conducted: 14.12 dBm Conducted: 14.51 dBm 8DPSK Transmitter Vnom Vnom –15 % Vnom +15 % Power (ch A) : Conducted: 8.23 dBm Conducted: 8.25 dBm Conducted: 9.11 dBm Power (ch B) : Conducted: 9.09 dBm Conducted: 9.05 dBm Conducted: 9.04 dBm Power (ch C) : Conducted: 7.93 dBm Conducted: 7.93 dBm Conducted: 7.91 dBm Antenna Type : internal antenna Fractus ® Reach Xtend TM Chip Antenna Antenna Gain : 2.0 dBi Power supply : 3.3 V DC Operating mode : duplex Type of modulation : GFSK, π/4-DQPSK, 8DPSKFHSS ETS Product Service AG Registration number: G0M20703-1249-P-15 Page 5 of 35 Host device : none Classification : Fixed Device Mobile Device (Human Body distance > 20 cm) Portable Device (Human Body distance < 20 cm) Manufacturer: (if applicable) Name : Free2move AB Street : Sperlingsgatan 7 Town : 302 48 Halmstad Country : Sweden Additional information: The test sample is designed as Bluetooth device. Its pseudorandom hopping scheme, authentication, receiver parameters, synchronization procedure and other parameters are determined by Bluetooth Core Specification. The enhanced data rate function (EDR) implies using of modulation schemes π/4-DQPSK and 8DPSK(additional to conventional GSFK-Modem). Relevant tests are repeated with the additional modulation using the lounges pay load. Related packet types are e.g. 2DH5 (π/4-DQPSK) and 2DH5 (8DPSK). Modulation scheme 8DPSK is preferred to test because it is considered as the worst case. ETS Product Service AG Registration number: G0M20703-1249-P-15 Page 6 of 35 1.6 Test standards Technical standard: FCC Parts: 15.247 IC Standards: RSS 210 Issue 6 Annex 8.1 2 Technical test 2.1 Summary of test results No deviations from the technical specification(s) were ascertained in the course : of the tests performed. or The deviations as specified in 2.5 were ascertained in the course of the tests … performed. 2.2 Test environment Temperature : 25 ° C Relative humidity content : 20 ... 75 % Air pressure : 86 ... 103 kPa Details of powe…

Text truncated - open the document above for the full version.

ETS Product Service AG Registration number: G0M20703-1249-P-15 Page 3 of 5 ETS Product Service AG Registration number: G0M20703-1249-P-15 Page 4 of 5 ETS Product Service AG Registration number: G0M20703-1249-P-15 Page 5 of 5