R4UARCFLEXEXIndustrial radio remote control systems

FLEXEXSeries User’s Manual CE Version Page 1 Table of Contents Page 1. Introduction 3 2. Radio Controlled Safety 4 3. General System Information A. Transmitter Handset 1. External Illustration (Standard Push Button Configuration) 5 2. Internal Illustration 6 B. Receiver Unit 1. External Illustration 7 2. Internal Illustration 8 4. Function Settings A. Transmitter Handset 1. System Channel Settings 9 2. Push Button Functions with LED Displays a. Standard Push Button Configuration (Transmitter Toggle) 10 b. Standard Push Button Configuration (A/B Selector) 11~13 c. Inline Push Button Configuration (Transmitter Toggle) 14 d. Inline Push Button Configuration (A/B Selector) 15~17 3. Channel Change via Push Buttons 18 4. Program 4-digit Security Code 19 5. I-Chip 20 B. Receiver Unit 1. System Channel Settings 21 2. Output Relay Configurations a. Output Relay Types 22 b. Output Relay Action at 2 nd Speed 22~23 c. ON/OFF Push Button Function 23 d. Magnet ON/OFF Push Button Function 24 e. Brake Function 24 f. External Warning Function 24 g. Momentary Contact 24 h. Toggled Contact 24 i. 3 rd Speed Push Button Function 24 Page 2 j. Auxiliary STOP Push Button Function 25 k. Pitch & Catch Function 25 3. Receiver Auto-Scanning Settings 25 4. Dip-switch Settings a. Interlocked Functions 26 b. Non-interlocked Functions 27 5. Jumpers Settings 28 6. I-Chip Programming Port 29 7. Voltage Settings 29 5. System Channels Table 30 6. Receiver Installation A. Output Relay Contact Diagram 31 B. Pre-Installation Precautions 32 C. Step-By-Step Installation 32~33 D. System Testing 33 7. Operating Procedure A. Transmitter Operation 1. General Operating Procedure 34~35 2. A/B Selector Push Button Operating Procedure 35 3. 3 rd Speed Push Button Operating Procedure 35 4. Pitch & Catch Operating Procedure 36 5. Automatic Channel Scanning Operating Procedure 36 6. Changing Transmitter Batteries 36 B. Status Light Indicators & Warnings 1. Transmitter STATUS Light Indication 37 2. Receiver STATUS Light Indication 38 3. Receiver SQ Light Indication 38 4. Receiver POWER Light Indication 38 5. Receiver COM Light Indication 38 C. Trouble Shooting Tips 39 8. System Specifications 40 9. EU Declaration of Conformity 41 Page 3 1. Introduction The FLEX radio remote control systems are designed for control of industrial equipment and machinery such as overhead traveling cranes, jib cranes, gantry cranes, tower cranes, electric hoists, winches, monorails, conveyor belts, mining equipment and other material handling equipment where wireless control is preferred. Each FLEX system consists of a transmitter handset and receiver unit. Other standard-equipped accessories include transmitter waist belt, spare transmitter power key, clear vinyl pouch, “AA” alkaline batteries, compass direction decal sheet and user’s manual. List of notable features include: * 62 user-programmable channels – Advanced synthesized RF controls with 62 built-in channels, no more fixed channel and fragile quartz crystals to break. * Automatic channel scanning receiver – No more hassle of climbing up the crane to change receiver channels. * Over one million unique ID codes (20bit) – Each and every Flex system has its own unique ID codes and serial number, never repeats. * Advanced controls – The Flex system utilizes advanced microprocessor controls with 32bit CRC and Hamming Code, which provide ultra fast, safe, precise, and error-free encoding and decoding. * Unique I-CHIP design – The I-CHIP functions in a way that is very similar to SIM card used on mobile phones, with the ability to transfer system information and settings from one transmitter to another without the hassle of resetting the spares. * Reliable push buttons – The in-house designed push buttons with gold-plated contacts are rated for more than one million press cycles. * Low power consumption – Requires only two “AA” Alkaline batteries for more than 150 hours of operating time between replacements. * Ultra-durable nylon and fiberglass composite enclosures – Highly resistance to breakage and deformation even in the most abusive environments. * Full compliance – All systems are fully complied with the FCC Part-15 Rules, European Directives (Safety, EMC, R&TTE, Machinery) and Industry Canada Specifications (IC). Page 4 2. Radio Controlled Safety Flex radio remote control system should be operated by persons with sufficient amount of knowledge and skill in crane operation and safety. Persons being trained to operate a radio remote controlled crane should possess the knowledge of all hazards peculiar to radio remote controlled crane operation, ability to judge distance and moving objects, equipment capacity and radio remote controlled safety rules. Radio remote controlled cranes should not be operated by any person with insufficient eyesight, hearing, illness, and under influence of drugs and medications that may cause loss of crane control. Below are some general operating safety tips that should be strictly followed when operating a radio remote controlled crane. 1. Prior to crane operation always check the transmitter handset for any damage that might inhibit proper crane operation. 2. Always check if the red emergency stop button is working properly prior to crane operation. 3. Check the Status LED on the transmitter for any signs of low battery power (refer to page 37). 4. Check the Status LED on the transmitter for any signs of irregularities (refer to page 37). 5. The crane limit switches should be checked prior to crane operation or at the beginning of each shift. When checking limit switches the hoist should be centered over an area free of personnel and equipment. 6. If the power to the crane is removed, the operator should turn off the transmitter power immediately until the power to the crane is restored. 7. If the crane fails to respond properly to operator’s command the operator should stop operation, turn the transmitter power off, and then report the condition to their supervisor. 8. Th…

Text truncated - open the document above for the full version.

A A d d v v a a n n c c e e d d R R a a d d i i o o t t e e c c h h C C o o r r p p o o r r a a t t i i o o n n 1F, 288-1, Hsin Ya Road, Chien Chen District, Kaohsiung, Taiwan Tel: 886-7-812-8112 Fax: 886-7-812-8119 Email: [email protected] Model Variant DATE：2015-09-17 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: R4UARCFLEXEX Product Name: Industrial radio remote control systems Dear Sir, Due to the business consideration, we have by declare that our product Models FLEX 4ES/4EX, FLEX 8ES/8EX, FLEX 12ES/12EX are covered by the subject FCC ID: R4UARCFLEXEX, and having the below minor differences on 1. PCB Layout: PCB size is different depend on 4/8/12 buttons. 2. Circuit diagram: The circuit diagrams (e.g. transmitter, encoder) are all the same except 4/8/12 buttons. 3. Component: The push button type is different between on one step and two steps. 4. Transmitter size: Because the transmitter module is mounted on the PCB, the size is different between 4/8/12 buttons, but their transmitter module and encoder are all the same. The main differences between models with suffixes ES and EX is the Push Button switch type used. ES with one step push button switch is used while EX with two steps. Please refer to Annex description for detail. Sincerely, By: Tom Jou Signature Printed Title: President Date: 2015-09-17 Annex – Description for Model Variant ES and EX Push Button switch type differences are the heads. ES one step EX two step To see the circuit diagram, 4 Type = 4ES/EX, 8 Type = 8ES/EX, 12 Type = 8ES/EX. There differences are the Push Button and Button’s resistance. ( EXAMPLE : 4ES/EX remove PB5~PB12 and R58~R73 R82~R97 R32~R37 ) ( EXAMPLE : 8ES/EX remove PB9~PB12 and R66~R73 R90~R97 R34~R37 )

Issue Date: Sep. 07, 2015 Page: 1 of 22 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group PHOTOGRAPHS OF EUT All View of EUT Front View of EUT (FLEX 4ES/4EX) Issue Date: Sep. 07, 2015 Page: 2 of 22 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Back View of EUT (FLEX 4ES/4EX) Side View of EUT – 1 (FLEX 4ES/4EX) Issue Date: Sep. 07, 2015 Page: 3 of 22 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Side View of EUT – 2 (FLEX 4ES/4EX) Side View of EUT – 3 (FLEX 4ES/4EX) Issue Date: Sep. 07, 2015 Page: 4 of 22 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-…

Text truncated - open the document above for the full version.

A A d d v v a a n n c c e e d d R R a a d d i i o o t t e e c c h h C C o o r r p p o o r r a a t t i i o o n n 1F, 288-1, Hsin Ya Road, Chien Chen District, Kaohsiung, Taiwan Tel: 886-7-812-8112 Fax: 886-7-812-8119 Email: [email protected] Label & Location Model: FLEX 4ES/4EX (4 buttons) Model: FLEX 8ES/8EX (8 buttons) A A d d v v a a n n c c e e d d R R a a d d i i o o t t e e c c h h C C o o r r p p o o r r a a t t i i o o n n 1F, 288-1, Hsin Ya Road, Chien Chen District, Kaohsiung, Taiwan Tel: 886-7-812-8112 Fax: 886-7-812-8119 Email: [email protected] Label & Location Model: FLEX 12ES/12EX (12 buttons)

Issue Date: Sep. 07, 2015 Page: 11 of 22 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Open View of EUT-1 (FLEX 4ES/4EX) Open View of EUT-2 (FLEX 4ES/4EX) Issue Date: Sep. 07, 2015 Page: 12 of 22 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Open View of EUT-3 (FLEX 4ES/4EX) Internal View of EUT-1 (FLEX 4ES/4EX) Issue Date: Sep. 07, 2015 Page: 13 of 22 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Internal View of EUT-2 (FLEX 4ES/4EX) Internal View of EUT-3 (FLEX 4ES/4EX) Issue Date: Sep. 07, 2015 Page: 14 of 22 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-…

Text truncated - open the document above for the full version.

103EN04.02-4ES FLEX 4ES NOVALUEReferenceQt y 1 103EN04.02.01-NPPCB1 2 218-8LPST (SMD)CHIP;DIP1,DIP22 3 FX6-20S-0.8SV2 (71)CHIP;CN11 4 DF9-9S-1V (32)CHIP;CN41 5 IC PIC18LF8520-I／PT (SMD) 80-LEAD TQFP;U11 6 IC XC9111C331MRN (SMD)SOT-25;U21 7 2SB1427T100E (SMD)MPT3;Q41 8 DTC114EKAT146 (SMD)SMT3;Q61 9 DTC115TKAT146 (SMD)SMT3;Q11 10 IMD10AT108 (SMD)SMT6;Q2,Q3,Q5,Q74 11 1N4148WS (SMD)SOD-323;D3~5,D17~3219 12 RB160L-40TE-25 (SMD)SOD-106;D1,D342 13 R 0603 100R ±5%R0603;R5,R8,R9,R31,R1005 14 R 0603 1K ±5%R0603;R18,R202 15 R 0603 10K ±5%R0603;R2,R4,R19,R21,R28, R42 ,R103,R104,R107,R108 10 16 R 0603 1M ±5%R0603;R22,R992 17 R 0603 47K ±5%R0603;R3,R13~17,R23~27, R39,R49 13 18 CC 0603 X7R 102 50V YAGEOC0603;C3,C6,C15,C234 19 CC 0603 X7R 104 50V YAGEOC0603;C1,C4,C8,C12,C18, C19 ,C20,C22,C25 9 20 TMCMC1A107MTRF (SMD)C CASE;C141 21 TMCMA1C475MTRF (SMD)A CASE;C7,C92 22 TMCMC1C476MTRF (SMD)C CASE;C2,C52 23 LQH32MN101K23L (SMD)CHIP;L21 24 VT6T11T2R (SMD)VMT6;Q91 25 VT6X11T2R (SMD)VMT6;Q101 26 2SD1781KT146R (SMD)SMT3;Q111 27 R 0603 470R ±5%R0603;R1061 28 R 0603 62K ±5%R0603;R1011 29 R 0603 0R ±5%R0603;R30,R1022 30 R 0603 3K3 ±5%R0603;R1,R6,R7,R294 31 R 0603 15K ±5%R0603;R50~57,R74~8116 32 4.0 CSTLS4M00G53-B0DIP;Y11 33 DG23-C3LADIP;S1,S22 34 DR4X7-221M+UL-NP (DIP)DIP;L11 35 M2X0.4-B4 36 SCREW M2-10L4 37 NUT M2-s4-t1.6 -NP4 38 EMS CONTAC T;STOP2 39 CONTACT SPRING ψ0.6(1.7~2Kgf)1 40 CONTACT PLATE-M1 41 CONTACT PLATE-P1 42 PB SPRING ψ0.4N11.5(750~800gf)4 43 PB STEP SPRING ψ0.3N11(225~275gf)4 44 STALL BALL φ2.58 45 MX1A-11NW8 46 PB PASE4 47 PB COVER4 48 PB CAP-1S4 49 PB CENTE R4 103EN04.02-4EX FLEX 4EX NOVALUEReferenceQty 1 103EN04.02.01-NPPCB1 2 218-8LPST(SMD)CHIP;DIP1,DIP22 3 FX6-20S-0.8SV2(71)CHIP;CN11 4 DF9-9S-1V(32)CHIP;CN41 5 IC PIC18LF8520-I／PT (SMD) 80-LEAD TQFP;U11 6 IC XC9111C331MRN(SMD)SOT-25;U21 7 2SB1427T100E(SMD)MPT3;Q41 8 DTC114EKAT146(SMD)SMT3;Q61 9 DTC115TKAT146(SMD)SMT3;Q11 10 IMD10AT108(SMD)SMT6;Q2,Q3,Q5,Q74 11 1N4148WS(SMD)SOD-323;D3~5,D17~3219 12 RB160L-40TE-25(SMD)SOD-106;D1,D342 13 R 0603 100R ±5%R0603;R5,R8,R9,R31,R1005 14 R 0603 1K ±5%R0603;R18,R202 15 R 0603 10K ±5%R0603;R2,R4,R19,R21,R28,R42,R103,R104,R107,R1010 16 R 0603 1M ±5%R0603;R22,R992 17 R 0603 47K ±5%R0603;R3,R13~17,R23~27,R39,R4913 18 CC 0603 X7R 102 50V YAGEOC0603;C3,C6,C15,C234 19 CC 0603 X7R 104 50V YAGEOC0603;C1,C4,C8,C12,C18,C19,C20,C22,C259 20 CC TMCMC1A107MTRF(SMD)C CASE;C141 21 CC TMCMA1C475MTRF(SMD)A CASE;C7,C92 22 CC TMCMC1C476MTRF(SMD)C CASE;C2,C52 23 LQH32MN101K23L(SMD)CHIP;L21 24 VT6T11T2R(SMD)VMT6;Q91 25 VT6X11T2R(SMD)VMT6;Q101 26 2SD1781KT146R(SMD)SMT3;Q111 27 R 0603 470R ±5%R0603;R1061 28 R 0603 62K ±5%R0603;R1011 29 R 0603 0R ±5%R0603;R30,R1022 30 R 0603 3K3 ±5%R0603;R1,R6,R7,R294 31 R 0603 15K ±5%R0603;R50~57,R74~8116 32 4.0 CSTLS4M00G53-B0DIP;Y11 33 DG23-C3LADIP;S1,S22 34 DR4X7-221M+UL-NP (DIP)DIP;L11 35 M2X0.4-B4 36 SCREW M2-10L4 37 NUT M2-s4-t1.6 -NP4 38 EMS CONTACT;STOP2 39 CONTACT SPRINGψ0.6(1.7~2Kgf)1 40 CONTACT PLATE-M1 41 CONTACT PLATE-P1 42 PB SPRINGψ0.4N11.5(750~800gf)4 43 PB STEP SPRING ψ 0.3N11 (225~275gf) 4 44 STALL BALLφ2.58 45 MX1A-11NW8 46 PB PASE4 47 PB COVER4 48 PB CAP-2S4 49 PB CENTER4 403EN08.02-8ES FLEX 8ES NOVALUEReferenceQt y 1 403EN08.02.01-NPPCB1 2 218-8LPST (SMD)CHIP;DIP1,DIP22 3 FX6-20S-0.8SV2 (71)CHIP;CN11 4 DF9-9S-1V (32)CHIP;CN41 5 IC PIC18LF8520-I／PT (SMD) 80-LEAD TQFP;U11 6 IC XC9111C331MRN (SMD)SOT-25;U21 7 2SB1427T100E (SMD)MPT3;Q41 8 DTC114EKAT146 (SMD)SMT3;Q61 9 DTC115TKAT146 (SMD)SMT3;Q11 10 IMD10AT108 (SMD)SMT6;Q2,Q3,Q5,Q74 11 1N4148WS (SMD)SOD-323;D3~5,D7,D8,D17~3221 12 RB160L-40TE-25 (SMD)SOD-106;D1,D342 13 R 0603 100R ±5%R0603;R5,R8,R9,R31,R1005 14 R 0603 1K ±5%R0603;R18,R202 15 R 0603 10K ±5%R0603;R2,R4,R19,R21,R28,R42,R103,R104,R 107 ,R108 10 16 R 0603 1M ±5%R0603;R22,R992 17 R 0603 47K ±5%R0603;R3,R13~17,R23~27,R38,R9813 18 CC 0603 X7R 102 50V YAGEOC0603;C3,C6,C15,C234 19 CC 0603 X7R 104 50V YAGEOC0603;C1,C4,C8,C12,C18,C19,C20,C22,C259 20 TMCMC1A107MTRF (SMD)C CASE;C141 21 TMCMA1C475MTRF (SMD)A CASE;C7,C92 22 TMCMC1C476MTRF (SMD)C CASE;C2,C52 23 LQH32MN101K23L (SMD)CHIP;L21 24 VT6T11T2R (SMD)VMT6;Q91 25 VT6X11T2R (SMD)VMT6;Q101 26 2SD1781KT146R (SMD)SMT3;Q111 27 R 0603 470R ±5%R0603;R1061 28 R 0603 62K ±5%R0603;R1011 29 R 0603 0R ±5%R0603;R30,R32,R33,R1024 30 R 0603 3K3 ±5%R0603;R1,R6,R7,R294 31 R 0603 15K ±5%R0603;R50~65,R74~8932 32 4.0 CSTLS4M00G53-B0DIP;Y11 33 DG23-C3LADIP;S1,S22 34 DR4X7-221M+UL-NP (DIP)DIP;L11 35 STAND OFF M2X0.4-B4 36 SCREW M2-10L4 37 NUT M2-s4-t1.6 -NP4 38 EMS CONTAC T;STOP2 39 CONTACT SPRING ψ0.6(1.7~2Kgf)Batt. Contact springψ0.6(1.7~2Kgf)1 40 CONTACT PLATE-MBatt. Contact ne gative plate1 41 CONTACT PLATE-PBatt. Contact positive plate V21 42 PB SPRING ψ0.4N11.5(750~800gf)key pad springψ0.4N11.5(750~800gf)8 43 PB STEP SPRING ψ 0.3N11 (225~275gf) key section springψ0.3N11(225~275gf)8 44 STALL BALL φ2.5steel ballφ2.516 45 MX1A-11NW16 46 PB PASEke y stand-C8 47 PB COVERke y cover-B8 48 PB CAP-1Ske y cap-B8 49 PB CENTE Rkey axis-A18 403EN08.02-8EX FLEX 8EX NOVALUEReferenceQt y 1 403EN08.02.01-NPPCB1 2 218-8LPST (SMD)CHIP;DIP1,DIP22 3 FX6-20S-0.8SV2 (71)CHIP;CN11 4 DF9-9S-1V (32)CHIP;CN41 5 IC PIC18LF8520-I／PT (SMD) 80-LEAD TQFP;U11 6 IC XC9111C331MRN (SMD)SOT-25;U21 7 2SB1427T100E (SMD)MPT3;Q41 8 DTC114EKAT146 (SMD)SMT3;Q61 9 DTC115TKAT146 (SMD)SMT3;Q11 10 IMD10AT108 (SMD)SMT6;Q2,Q3,Q5,Q74 11 1N4148WS (SMD)SOD-323;D3~5,D7,D8,D17~3221 12 RB160L-40TE-25 (SMD)SOD-106;D1,D342 13 R 0603 100R ±5%R0603;R5,R8,R9,R31,R1005 14 R 0603 1K ±5%R0603;R18,R202 15 R 0603 10K ±5%R0603;R2,R4,R19,R21,R28,R42,R103,R104,R107,R10810 16 R 0603 1M ±5%R0603;R22,R992 17 R 0603 47K ±5%R0603;R3,R13~17,R23~27,R38,R9813 18 CC 0603 X7R 102 50V YAGEOC0603;C3,C6,C15,C234 19 CC 0603 X7R 104 50V YAGEOC0603;C1,C4,C8,C12,C18,C19,C20,C22,C259 20 TMCMC1A107MTRF (SMD)C CASE;C141 21 TMCMA1C475MTRF (SMD)A CASE;C7,C92 22 TMCMC1C476MTRF (SMD)C CASE;C2,C52 23 LQH32MN101K23L (SMD)CHIP;L21 24 VT6T11T2R (SMD)VMT6;Q91 25 VT6X11T2R (SMD)VMT6;Q101 26 2SD1781KT146R (SMD)SMT3;Q111 27 R 0603 470R ±5%…

Text truncated - open the document above for the full version.

Report No: ER/2015/80066 FCC ID: R4UARCFLEXEX Issue Date: Sep. 22, 2015 Page: 1 of 61 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Product Name: Industrial radio remote control systems Brand Name: ARC Model No.: FLEX 4ES/4EX, FLEX 8ES/8EX, FLEX 12ES/12EX Model Difference: 1. PCB layout. 2. Circuit diagram. 3. Component. 4. Transmitter size. FCC ID: R4UARCFLEXEX Report No.: ER/2015/80066 Issue Date: Sep. 22, 2015 Rule Part: §15.231 Prepared by: Advanced Radiotech Corporation 1F. 288-1, Hsin Ya Road, Chien Chen Dist., Kaohsiung City, Taiwan Prepared by: SGS Taiwan Ltd. Electronics & Communication Laboratory No.134, Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803 Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This document may be altered or revised by SGS Taiwan Ltd. personnel only, and shall be noted in the revision section of the document. Report No: ER/2015/80066 FCC ID: R4UARCFLEXEX Issue Date: Sep. 22, 2015 Page: 2 of 61 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written a…

Text truncated - open the document above for the full version.