R8N-URM-G-916Transmitter Module

Document Number:DOC-0051 Revision:01 Released:August 2005 MeshScape™ Commercial- and Industrial-class Wireless Sensor Networks RK-5409-5 Reference Kit for 916 MHz MeshScape Systems User’s Guide COPYRIGHT This manual is produced and copyrighted by Millennial Net, Inc. Any use or reproduction of the contents of this manual without the prior written consent of Millennial Net, Inc. is strictly prohibited. NOTICE All title and copyrights to this document are owned by Millennial Net, Inc. No part of the contents of this document may be reproduced or transmitted in any form or by any means without the written permission of Millennial Net, Inc. Millennial Net, Inc. shall not be liable for errors contained herein. Millennial Net, Inc. shall not be liable for any damages whatsoever, including, without limitation, damages for loss of business profits, business interruption, loss of business information, or other pecuniary loss arising out of the use of this documentation even if Millennial Net, Inc. has been made aware of the possibility of such damages. Information contained in this document is subject to change without notice. While every effort is made to ensure that the information is accurate as of the publication date, users are reminded to update their use of this document with documents published by Millennial Net, Inc. subsequent to this date. Third-party product information is for informational purposes only, and constitutes neither an endorsement nor a recommendation. Millennial Net, Inc. expressly disclaims any responsibility with respect to the performance of the third-party products. Copyright © 2000, 2001 - 2005 by Millennial Net, Inc. ALL RIGHTS RESERVED Printed in U.S.A. Millennial Net, Inc. 2 Fourth Avenue Burlington, MA 01803-3304 USA +1 781.222.1030 RK-5409-5 Reference Kit User’s Guidev CAUTION Initialization of the product should be performed only by a qualified systems administrator. Compliance Statements FCC Compliance FCC compliance for Millennial Net’s RK-5409-5 Reference Kit (916MHz, 5-3-1) consisting of the following models/components: •EN-5409 end node •MN-5409 mesh node •MG-5409 MeshGate gateway Compliance Statement (Part 15.19) The Millennial Net RK-5409-5 Reference Kit complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning (Part 15.21) Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Unlicensed Modular Approval (for OEMs) The URM-G-916 complies with the FCC's 47CFR Part 15 rules and regulations as well as Part 15 Unlicensed Modular Approval as outlined in DA 00-1407. Compliance with the Modular Approval rules allows an OEM to integrate the URM-G-916 into other products without further FCC certification of the intentional radiator, but an OEM must still test their final product to comply with unintentional radiator requirements of 47CFCR Part 15. Under the Modular Approval rules, an OEM must comply with the following when integrating the URM-G-916 into an end product: 1. The OEM must ensure that FCC labeling requirements are met. This shall include a clearly visible label on the exterior of the end product with the following nomenclature: Contains FCC ID: R8N-URM-G-916 2. The OEM must only use the reverse-SMA antennas listed below when integrating the device into an end product. These antennas have been tested and approved for use with the URM-G-916. Integrating the module using any other antenna will require testing to ensure compliance with FCC rules and regulations. Mobile Mark ½ wave Antenna Part Number: PSKN3-925RS viMillennial Net Nearson ½ wave Antenna Part Number: S467AH-915S Linx ¼ wave Antenna Part Number: ANT-916-CW-QW 3. The OEM must use the same cable type and of the same length or longer than that defined below. Use of another cable type or of a shorter length will require testing to ensure compliance with FCC rules and regulations. RF Cable type: RG174 RF Cable Length: 5.9" +/- 0.13” Millennial Net Cable P/N: CBL-0008-01 Industry Canada Compliance Statement This device has been designed to operate with an antenna having a maximum gain of 2.65 dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 Ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. OEM Integration The module has the same requirements for integration into an OEM product for Industry Canada as it does for FCC. The only difference being the labeling nomenclature required on the exterior of the OEM product. The following must be clearly visible on the exterior of the OEM product: Contains IC: 5127A-URMG916 Trademarks © 2000 - 2005 Millennial Net, Inc. All rights reserved. Millennial Net ™ and MeshScape ™ are trademarks of Millennial Net, Inc. All other trademarks are the property of their respective owners. Information subject to change. RK-5409-5 Reference Kit User’s Guidevii Contents About This Guide Audience ....................................................................................................................xvi Using This Guide .........................................................................................................xvi Symbols and Conventions .......................................................................................... xvii Contacting Millennial Net ......................................................................................... xviii World Wide Web................................................................................................ xviii…

Text truncated - open the document above for the full version.

Response to TCB Findings The test report data tables show that testing has been performed with 1/2 wave antenna. Has 1/4 wave antenna been tested? Please clarify. The test report has been updated to include the 1/4 wave antenna data. Also, please note that the user manual insert includes 3 antennas. There are 2 1/2 wave antennas, one with 2.3dBi gain and one with 2.0dBi. The 2.3dBi was tested. It appears from the test setup photos, that the antenna was laying on the wooden table during spurious emissions testing. Please confirm that other orientations have been tested and worst case presented. Testing was performed with the product oriented in each orthogonal axis. Please clarify with your client why the user guide does not include any information or instructions for URM-G-916 module, except for the pages you have mentioned. It appears the manual is for RK-5409-5. If there is a specific manual for this module, that must be supplied for the application. Our User Manual describes our networking system which comprises a number of different transceiver devices. We do not have manuals for each individual device. The device we are looking for modular approval, the FCC ID would be R8N- URM-G-916, is actually contained within the MG-5409 product as defined in the User Manual. At this time, we have not offered for sale just the module by itself, although we plan to offer it as a standalone item in the future. As such, in the beginning of the User Manual we have added a section which describes the requirements of embedding the module into a design, it’s referred to as the URM-G-916, such as the antenna and cable type that must be used as well as the labeling requirements.

July 25 th , 2005 Attn: Reviewing Engineer Federal Communications Commission 7435 Oakland Mills Road Columbia, MD21046 The following outlines how Millennial Net’s URM-G-916 module meets the FCC’s 8 requirements for modular approval. 1.) The modular transmitter must have its own RF shielding. This is intended to ensure that the module does not have to rely upon the shielding provided by the device into which it is installed in order for all modular transmitter emissions to comply with Part 15 limits. It is also intended to prevent coupling between the RF circuitry of the module and any wires or circuits in the device into which the module is installed. Such coupling may result in non-compliant operation. The URM-G-916 device is equipped with an RF shield that physically encompasses the entire RF circuit, from the digital input all the way to the MMCX RF connector on the edge of the module. The RF shield provides not only immunity to external signals but will comply with all Part 15 limits. 2.) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. All data inputs to the URM-G-916 interface directly to a microcontroller. There are no direct connections between the external interfaces of the module and the radio circuit. The microcontroller controls all Network/Protocol processing and buffers all externally generated data prior to transmission, as such the radio will never experience excessive data rates or over-modulation. A block diagram of the module is included in the test report. 3.) The modular transmitter must have its own power supply regulation. This is intended to ensure that the module will comply with Part 15 requirements regardless of the design of the power supplying circuitry in the device into which the module is installed. The URM-G-916 contains an on-board voltage regulator which is used to provide the local power to all the on-board circuits. The operating voltage of the module is specified for 3.3 ± 5%. 4.) The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). Any antenna used with the module must be approved with the module, either at the time of initial authorization or through a Class II permissive change. The “professional installation” provision of Section 15.203 may not be applied to modules. The URM-G-916 is equipped with a board mounted MMCX connector for use in attaching an external antenna. External antennas are attached via a coax cable assembly with the corresponding MMCX mating connector on one end and a Reverse Polarity SMA jack on the other end. The test report will detail the various antennas the module was tested with along with the cable used for testing. 5.) The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified or commercially available (see Section 15.31(i)). The URM-G-916 is supplied power via its interface connector located on the bottom side of the module, typically provided by an application board of some sort. The module was tested while being hosted on one of Millennial Net’s representative application boards. The module is DC powered. There are no ferrites located on the power supply feed lines on application board used for testing. 6.) The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. The URM-G-916 will be labeled as “FCC ID: R8N-URM-G-916” on the RF shield. Examples of the labeling used both on the module and the device this is integrated into will be included in the test report. 7.) The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case t…

Text truncated - open the document above for the full version.

FCC ID: R8N-URM-G-916 WO: EF0551-1 IC: 5127A-URMG916 Company: Millennial Net Quarter wave antenna Half wave antenna FCC ID: R8N-URM-G-916 WO: EF0551-1 IC: 5127A-URMG916 Company: Millennial Net FCC ID: R8N-URM-G-916 WO: EF0551-1 IC: 5127A-URMG916 Company: Millennial Net FCC ID: R8N-URM-G-916 WO: EF0551-1 IC: 5127A-URMG916 Company: Millennial Net

Printing Solutions for Business Improvement Home | Login | Create Profile | Contact Zebra Select Language Search Find it Now Bookmark This Page I N D U S T R Y S O L U T I O N S P R O D U C T S H O W T O B U Y D R I V E R S & D O W N L O A D S S E R V I C E & S U P P O R T R E S O U R C E L I B R A R Y A B O U T Z E B R A F O R P A R T N E R S P R I N T E R S S U P P L I E S L a b e l s R e c e i p t s R i b b o n s R F I D S m a r t L a b e l s T a g s W r i s t b a n d s C u s t o m S u p p l i e s C a r d s V a l u e P a c k s D i s c o n t i n u e d S u p p l i e s E M E A S U P P L I E S A C C E S S O R I E S S O F T W A R E P A R T S & P R I N T H E A D S N E T W O R K I N G P R I N T E R M A N A G E M E N T S P E C I A L F E A T U R E S D I S C O N T I N U E D P R O D U C T S R E C E N T L Y V I E W E D P R O D U C T S No products have been viewed. Z-Ultimate® 3000 White Both current and discontinued printers are included in the compatible printers list. For current printers only, click the printer name to view more detailed information. A pearl white topcoated polyester thermal transfer facestock with permanent acrylic adhesive. Ideal for thermal transfer applications that require outstanding print quality and unparalleled smear and scratch resistance. UL recognized for indoor and outdoor use when used with compatible Zebra Resin Ribbons. Recommended for use in a wide variety of applications, including shelf or scan-pallet labels, water-immersed labels, or labels in contact with moving parts. R E L A T E D R E S O U R C E S View the Supplies Brochure (PDF, 171 KB) View the Supplies Selector Guide (PDF, 110 KB) F E A T U R E S Chemical Resistant High Durability High Heat Water Resistant Sort By: Part Number Size Part Number SizeQuantityMedia Format Perforation Compatible Printers Core Diameter How To Buy 65588 1.25" x 0.25" 31.75mm x 6.35mm 15710 Roll 105SL, 110PAX4, 110XiIIIPlus, R110Xi 105S, 105Se, 110PAX3, 90Xi, 90XiII, 90XiIII, 90XiIIIPlus, 96XiIII, 96XiIIIPlus 8" 203.2mm How to Buy 65590 1.5" x 0.5" 38.1mm x 12.7mm 9420 Roll 105SL, 110PAX4, 110XiIIIPlus, 140XiIIIPlus, 2746e, R110PAX3, R110Xi, R4Mplus, S600, Z4Mplus 105S, 105Se, 110PAX3, 140Xi, 140XiII, 140XiIII, 2746, 90Xi, 90XiII, 90XiIII, 90XiIIIPlus, 96XiIII, 96XiIIIPlus, R-140, S-300, S-500, S400, TLP 2344, Z4000, Z4M 8" 203.2mm How to Buy 18180 1.750" x 0.750" 44.450mm x 19.050mm 7160 Roll Perforation Between Labels 105SL, 110PAX4, 140XiIIIPlus, 2746e, R110Xi, R110XiIIIPlus, R4Mplus, S600, Z4Mplus, Z6Mplus 105S, 105Se, 110PAX3, 140Xi, 140XiII, 140XiIII, 2746, 90Xi, 90XiII, 90XiIII, 90XiIIIPlus, 96XiIII, 96XiIIIPlus, R-140, S-300, S-500, S400, TLP 2344, Z4000, Z4M, Z6000, Z6M 8" 203.2mm How to Buy 94686 2.5" x 0.5" 63.5mm x 12.7mm 10020 Roll Perforation Between Labels 105SL, 110PAX4, 110XiIIIPlus, 140XiIIIPlus, 170XiIIIPlus, 2746e, R110PAX3, R110Xi, R110XiIIIPlus, R4Mplus, S600, Z4Mplus, Z6Mplus 8" 203.2mm How to Buy Home > Products > Supplies > Labels > Thermal Transfer > Z-Ultimate® 3000 White Page 1 of 5Z-Ultimate 3000 White - thermal transfer label from Zebra 9/2/2005http://www.zebra.com/id/zebra/na/en/index/products/supplies/labels/thermal_transfer/z-ultimate_3000_whi... 105S, 105Se, 110PAX3, 140Xi, 140XiII, 140XiIII, 160S, 170Xi, 170XiII, 170XiIII, 2746, 90Xi, 90XiII, 90XiIII, 90XiIIIPlus, 96XiIII, 96XiIIIPlus, R-140, S-300, S-500, S400, TLP 2344, Z4000, Z4M, Z6000, Z6M 65587 2.75" x 1.25" 69.85mm x 31.75mm 4270 Roll 105SL, 110PAX4, 110XiIIIPlus, 140XiIIIPlus, 170XiIIIPlus, 2746e, R110PAX3, R110Xi, R4Mplus, S600, Z4Mplus, Z6Mplus 105S, 105Se, 110PAX3, 140Xi, 140XiII, 140XiIII, 160S, 170Xi, 170XiII, 170XiIII, 2746, 90Xi, 90XiII, 90XiIII, 90XiIIIPlus, 96XiIII, 96XiIIIPlus, R-140, S-300, S-500, S400, TLP 2344, Z4000, Z4M, Z6000, Z6M 8" 203.2mm How to Buy 17156 2" x 1" 50.8mm x 25.4mm 5570 Roll Perforation Between Labels 105SL, 110PAX4, 110XiIIIPlus, 140XiIIIPlus, 170XiIIIPlus, 2746e, R110PAX3, R110Xi, R4Mplus, S600, Z4Mplus, Z6Mplus 105S, 105Se, 110PAX3, 140Xi, 140XiII, 140XiIII, 160S, 170Xi, 170XiII, 170XiIII, 2746, 90Xi, 90XiII, 90XiIII, 90XiIIIPlus, 96XiIII, 96XiIIIPlus, R-140, S-300, S-500, S400, TLP 2344, Z4000, Z4M, Z6000, Z6M 8" 203.2mm How to Buy 17157 2" x 1" 50.8mm x 25.4mm 2530 Roll Perforation Between Labels 2746e, R2844-Z, R402, TLP 2824, TLP 2844, TLP 2844- Z, TLP 3842, TLP 3844-Z 2746, LP 2722, LP 2742, T402, TLP 2642, TLP 2722, TLP 2742, TLP 3642, TLP 3742 5" 127mm How to Buy 18940 2" x 1.25" 50.8mm x 31.75mm 2070 Roll Perforation Between Labels 2746e, R2844-Z, R402, TLP 2824, TLP 2844, TLP 2844- Z, TLP 3842, TLP 3844-Z 2746, LP 2722, LP 2742, T402, TLP 2642, TLP 2722, TLP 2742, TLP 3642, TLP 3742 5" 127mm How to Buy 18943 2" x 0.5" 50.8mm x 12.7mm 4550 Roll Perforation Between Labels 2746e, R2844-Z, R402, TLP 2824, TLP 2844, TLP 2844- Z, TLP 3842, TLP 3844-Z 2746, LP 2722, LP 2742, T402, TLP 2642, TLP 2722, TLP 2742, TLP 3642, TLP 3742 5" 127mm How to Buy 65585 2" x 1.25" 50.8mm x 31.75mm 4270 Roll 105SL, 110PAX4, 110XiIIIPlus, 140XiIIIPlus, 170XiIIIPlus, 2746e, R110PAX3, R110Xi, R4Mplus, S600, Z4Mplus, Z6Mplus 105S, 105Se, 110PAX3, 140Xi, 140XiII, 140XiIII, 160S, 170Xi, 170XiII, 170XiIII, 2746, 90Xi, 90XiII, 90XiIII, 90XiIIIPlus, 96XiIII, 96XiIIIPlus, R-140, S-300, S-500, S400, TLP 2344, Z4000, Z4M, Z6000, Z6M 8" 203.2mm How to Buy 68431 2" x 4" 50.8mm x 101.6mm 1570 Roll 105SL, 110PAX4, 110XiIIIPlus, 140XiIIIPlus, 170PAX4, 170XiIIIPlus, 2746e, R110PAX3, R110Xi, R4Mplus, S600, Z4Mplus, Z6Mplus 105S, 105Se, 110PAX3, 140Xi, 140XiII, 140XiIII, 8" 203.2mm How to Buy Page 2 of 5Z-Ultimate 3000 White - thermal transfer label from Zebra 9/2/2005http://www.zebra.com/id/zebra/na/en/index/products/supplies/labels/thermal_transfer/z-ultimate_3000_whi... 160S, 170PAX, 170PAX3, 170Xi, 170XiII, 170XiIII, 2746, 90Xi, 90XiII, 90XiIII, 90XiIIIPlus, 96XiIII, 96XiIIIPlus, R-140, S-300, S-500, S400, TLP 2344, Z4000, Z4M, Z6000, Z6M 83311 2" x 0.5" 50.8mm x 12.7mm 10000 Roll 105SL, 110PAX4, 110XiIIIPlus, 140XiIIIPlus, 170…

Text truncated - open the document above for the full version.

FCC ID: R8N-URM-G-916 WO: EF0551-1 IC: 5127A-URMG916 Company: Millennial Net Quarter wave antenna Half wave antenna FCC ID: R8N-URM-G-916 WO: EF0551-1 IC: 5127A-URMG916 Company: Millennial Net Module top view Module bottom view FCC ID: R8N-URM-G-916 WO: EF0551-1 IC: 5127A-URMG916 Company: Millennial Net Module top view close-up Module bottom view close-up FCC ID: R8N-URM-G-916 WO: EF0551-1 IC: 5127A-URMG916 Company: Millennial Net Module top view close-up with shield removed

CW Series 1/4-wave antennas deliver outstanding per- formance in a rugged and cosmetically attractive pack- age. These antennas feature an SMA or FCC Part 15 compliant RP-SMA connector. This simplifies packaging and shipment, allowing for easy field replacement while complying with FCC requirements. A wide variety of matching connectors allows numerous mounting options. The CW Series comes standard in black, but custom colors are available with a 5,000 piece minimum order. Features Electrical Specifications Low cost Outstanding VSWR Excellent performance Omni-directional pattern Flexible main shaft Fully weatherized Rugged & damage-resistant RP-SMA or SMA connector Available in black or custom colors Use with plastic* or metal enclosures VSWR Impedance Connector Cable Bandwidth <1.9 typ. 50 ohms RP-SMA or SMA n/a 100MHz typ. * Requires proximity ground plane ANT-916-CW-QW DATA SHEET Product DimensionsDescription Plots Antenna Factor575 S.E. Ashley Place Grants Pass, OR 97526-3237 www.antennafactor.com 541-956-0931 (phone) 541-471-6251 (fax) Rev 05-27-05 AzimuthElevationTypical VSWR 270 90 180 0 -30dB -25dB -20dB -15dB -10dB - 5dB 0dB 5dB 10dB 270 90 180 0 -30dB -25dB -20dB -15dB -10dB - 5dB 0dB 5dB 10dB Note: Electrical specifications and plots measured on a 4” x 4” reference ground plane Coming Soon Coming Soon Coming Soon Coming Soon Ordering Information ANT-916-CW-QW (with RP-SMA connector) ANT-916-CW-QW-SMA (with SMA connector) CENTER 916.000 000MHz SPAN 200.000 000MHz 3.15” (80) 0.24” (6.0) 0.51” (13) 2.05” (52) 0.18” (4.5) 0.31” (7.8) 0.25” (6.4) End View 0.57” (14.5)

7 1/2 wave Device Antennas 90 o Adjustable Knuckle Antennas Specifications Frequency:See above Gain:2.3 dBi max VSWR:2.0:1 over band Impedance:50 Ohm nominal Maximum Power:10 Watts Connector:See models above Whip Length Straight: 900 & 925 Series9" in straight position 1800 & 1900 Series: 7 .75" in straight position 2400 Series:7" in straight position Whip Length 90 o : 900 & 925 Series7.9" in right angle position 1800 & 1900 Series: 6.5" in right angle position 2400 Series:5.75" in right angle position Right Angle Standoff:1.25" inside clearance, 1.75" outside clearance Whip Material:Polyurethane Please consult factory for special configurations & frequency bands. These antennas require no ground plane for operation. This makes them ideal for use with portable devices or products with no substantial groundplane. They can even be used with products that consist of all plastic chassis or case. The PSKN Series antennas use a full length center fed dipole configuration. A knuckle feature allows the antenna to be adjusted between a straight position, to a 90 o right angle position. This is useful for products that may need to be placed both horizontal and vertical, or where the connector is placed on the side of a radio device. Maximum radiation is achieved along the horizon, and bandwidth provided is substantial. VSWR is typically 2:1 or better over the desired frequency range. The antennas are available in many popular frequency bands. The radome is made of flexible Polyurethane. Standard connector styles available include TNC or SMA. For FCC part 15 compliance, select models offer reverse polarity connectors. PSKN Adjustable Series
Up to 2.3 dBi gain styles with semi-flexible radome and adjustable knuckle
Halfwave design requires no groundplane
Models for popular bands including Cellular, Mobitex, ISM, GSM, 802.11
Sleek molded profile, with a choice of SMA or TNC connectors Model Numbers - TNC Male Connectors ModelTypical UseFrequency PSKN3-900TUS Cellular/CDPD 824-894 MHz PSKN3-925TEU GSM/Mobitex870-960 MHz PSKN3-1800T EU DCS-18001710-1880 MHz PSKN3-1900T US PCS/GPRS1850-1990 MHz PSKN3-2400T 802.11b WLAN2400-2485 MHz Model Numbers - SMA Male Connectors PSKN3-900SUS Cellular/CDPD 824-894 MHz PSKN3-925SEU GSM/Mobitex870-960 MHz PSKN3-1800S EU DCS-18001710-1880 MHz PSKN3-1900S US PCS/GPRS1850-1990 MHz PSKN3-2400S 802.11b WLAN2400-2485 MHz Model Numbers - Rev SMA Plug Connectors PSKN3-925RS US PCS/GPRS870-960 MHz PSKN3-2400RS 802.11b WLAN2400-2485 MHz Special configurations including reverse gender & special frequencies may be available upon request. Please consult factory for details/availability. Models with "-925 designators also overlap the ISM 902-928 band. Product Specifications US Office & Headquarters: 3900-B River Road, Schiller Park, IL 60176 Tel: 800-648-2800 or 847-671-6690 Fax: 847-671-6715 UK Office: 106 Anglesey Business Park, Hednesford, Staffs. WS12 1NR UK Tel: (+44) 1543-878343 Fax: (+44) 1543-871714 Visit our web page at www.mobilemark.com. Specifications subject to change without notice (6/2003). SMA (L) & TNC (R) versions 10 1/4 wave Device Antennas Dual Band for Cellular & PCS/DCS-1800 Specifications Frequency:See above Gain:0 dBi max Bandwidth@2:1SWR:See freq range above Impedance:50 Ohm nominal Maximum Power:10 Watts Operating Temp:-22 o F to 140 o F Connector:SMA Male (plug) Whip Length:1 3/4" inches (4.5 cm) Radome Material:Polyurethane, with black matt finish, and knurled connector Model Numbers - Straight Antennas ModelFrequency Band PSTG0-900/1900S824-894 MHz & 1850-1990 MHz PSTG0-925/1800S890-960 MHz & 1710-1880 MHz PSTG0-925/1900S890-960 MHz & 1850-1990 MHz PSTG0-1950/2140S1920-1980 MHz & 2110-2170 MHz Frequency Guide -900 ModelsFor US Cellular (Analog& Digital), CDPD -925 ModelsFor EU Cellular, ISM, Mobitex & RAM /1800For DCS-1800 /1900For US PCS (& GPRS) -1950/2140For 3G applications Special configurations available upon request. Please consult factory for details/availability. These quarterwave stubby antennas offer high perfor- mance with the minimum of size. The helical design of the antennas results in a compact length that is only 1 3/4" in length. The sleek profile pairs well with a wide variety of devices. Different dual band combinations are offered, providing maximum of flexibility to meet different requirements. Typical popular combinations include US AMPS Cellular with PCS (GPRS), or International GSM with DCS-1800. Other cross continent combinations are available, please consult factory for details The antennas are available with an SMA Male connector. The connector is lightly knurled for easy tightening. The antenna radomes are made from polyurethane, which provided a protective, waterproof covering. It is a solid material, which provides some flexibility. This makes these antennas suitable for devices such as access points, or hand-held portable units. As helical antennas, the ground plane in the device influences the performance of these quarterwave anten- nas. The specific radiation characteristics depends on the total configuration of the unit when interfaced with the
Sleek profile with small SMA connectors
Compact helical design with high performance
Perfect for dual band wireless handset and GPRS data units
Tough polyurethane radome resists impact damage PTSG Series Dual Band Antennas antenna. How the wireless device is mounted or handled can also influence the radiation characteristics. For larger volume/OEM applications, performance can be optimized with a one time factory adjustment. Please contact us for further details. Product Specifications US Office & Headquarters: 3900-B River Road, Schiller Park, IL 60176 Tel: 800-648-2800 or 847-671-6690 Fax: 847-671-6715 UK Office: 106 Anglesey Business Park, Hednesford, Staffs. WS12 1NR UK Tel: (+44) 1543-878343 Fax: (+44) 1543-871714 Visit our web page at www.mobilemark.com. Specifications subject to change without notice (6/2003). 11 Covert Cellular Antenna For Cellular/CDPD, GSM, ISM…

Text truncated - open the document above for the full version.

Curtis-Straus LLC is accredited by the American Association for Laboratory Accreditation for the specific scope of accreditation under Certificate Number 1627-01. This report may contain data which is not covered by the A2LA accreditation. _____________________________________________________________ Curtis-Straus LLC • 527 Great Road • Littleton, MA • TEL (978) 486-8880 • FAX (978) 486-8828 Test Report Report No EF0551-1 Client Millennial Net Phone 781-222-1030 Fax 781-222-1039 FRN 0011054871 Models 5409-URM-G FCC ID R8N-URM-G-916 IC # 5127A-URMG916 Equipment Type Low Power Communications Device Transmitter Equipment Code DXX Emission Designator A1D Results As detailed within this report Prepared by Josh LeBlanc – Test Engineer Authorized by Michael Buchholz – EMC Manager Issue Date 8/29/05 Conditions of issue This Test Report is issued subject to the conditions stated in ‘terms and conditions’ section of this REPORT: EF0551-1 FCC ID: R8N-URM-G-916 IC: 5127A-URMG916 _____________________________________________________________ Curtis-Straus LLC • 527 Great Road • Littleton, MA • TEL (978) 486-8880 • FAX (978) 486-8828 Page 2 of 18 Summary ...........................................................................................................3 Test Methodology..............................................................................................3 EUT Configuration.............................................................................................3 Statement of Conformity....................................................................................3 Spurious Radiated Emissions............................................................................3 Emission Bandwidth ..........................................................................................3 Fundamental and Harmonics Field Strength ............................…

Text truncated - open the document above for the full version.