RAQAPX071Tablet PC with WiFi and BT

APX-071 User Manual Safety Guidelines • Follow the instructions to ensure correct and safe installation and interconnection of the apparatus. • Incorrect connection may cause injure. FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The deivce can be used in portable exposure condition without restriction. This device must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT: 1) Use only with the adaptor supplied by Hon Kwang. type no. HK-AX-120A200-US 2) Plug the adapter to the socket outlet that near the equipment and shall be easily accessible. WARNING: WARNING:WARNING: WARNING:TO PR EV EN T F IR E OR E L EC TR IC AL SH OC K HA ZA RD , DO N OT E XP OS E TH IS PR OC UC T TO RA IN O R M OI ST UR E T H E LI GH TI NG F LA SH A N D AR RO W HE AD W IT HI N T H E TR IA NG LE I S A W A RN IN G SI GN A LE RT IN G Y O U OF “ D AN GE RO US V O LT AG E” I NS IN DE T HE P R OD UC T. CAUTION CAUTIONCAUTION CAUTION: T O RE DU CE T HE R I SK O F EL EC TR IC AL S HO CK , D O N OT R EM OV E CO VE R (O R B A CK ). N O US ER S E RV IC EA BL E PA RT S IN SI DE . R E FE R SE RV IC IN G TO Q U AL IF IE D SE RV IC E P E RS ON NE L. T H E E X CL AM AT IO N WI TH IN T H E TR IA NG LE I S WA RN IN G S I GN A LE RT IN G YO U OF I M PO RT AN T IN ST RU CT IO NS A C CO MP AN YI NG T H E PR OD UC T. S E E MA RK IN G ON B OT TO M / BA CK OF P RO DU CT C o rr ec t Di sp os al o f th is p ro d uc t T h is m ar ki ng in di ca te s t ha t t h is p ro du ct sh ou ld no t b e di s po se d wi th ot he r hou se ho ld w a st es . To pr ev en t po ss ib le h a rm t o t he e nv ir on me nt or hu m an h ea lt h f ro m un co nt roll ed w a st e di sp os al , re cy cl e i t r e sp on si bl y to p ro mo te th e s u st ai na bl e re us e of ma te ria l r e so ur ce s. To re tu rn yo ur us e d d ev ic e, pl ea se us e t he r e tu rn an d c ol le ct io n s ys tem s o r co nt ac t th e re ta il er w her e th e pr od uc t wa s pu rc ha sed . Th ey c an t ak e th is p ro duc t f o r en vi ro nm en ta l sa fe r ec yc l in g. Waterproof The APX071 is designed for waterproof. For protecting your tablet best, you must cover the all covers (Earphone, SD card, IO/DC) and insert the grips. Remark: 1. Dry the device thoroughly with a clean and dry cloth in the case of the device getting wet. 2. In the cases of the covers are not covered well / the covers are opened without drying the device thoroughly, waterproof performance will be affected. Manufacturer will not be responsible for any corresponding liability. Shock Buster - Accessories for APX071 series User can install a pair of Shock Busters to enhance performance withstanding drop test from 1.2m (wooden surface). The Shock Buster Please follow the illustration to install the Shock Buster. Technical Specifications AC / DC Adapter Input: 100~240VAC, Output: 12VDC 2A Rechargeable Battery 7.4V 3100mAh Li-Polymer Charge Time 12 hours for first time DESCRIPTION OF THE DEVICE 1. Charge LED 2.Indicator LED 3.Front Camera 4.Light Sensor 5. Touch Panel/Display 6. Return key 7.Menu key 8.Home key 9. NFC sensor (optional) 10.Rear Camera 11. Screws to attach Grip (for optional accessory) 12. Speaker 13. Contact for secondary battery (for optional accessory) 14. Lock for a secondary battery (optional accessory) 15. Grip lock (for optional accessory) 16. Hole for cord 17. Earphone jack 18. Power / Lock 19. Volume – 20. Volume + 21. USB port (left) 22. USB port (right) 23. Grip lock (for optional accessory) 24. Hole for cord 25. Power input 26. I/O connecter 27. Nut for tripod 28. Micro SD card slot STARTING UP ①. Connect the supplied power cable to the APX071 Power connector and to a wall outlet. ②.The APX071 will start charging. The Power indicator light is red while the battery is charging. It will turn off when the battery is fully charged. Remark: Use only adapter listed in the user manual. POWER ON Press and hold the power for about 2 seconds to power on the unit. INSTALL NEW APPS You can download the apps from Opera Mobile Store. This online library of free and purchasable applications has thousands of useful applications (Media player, games, etc.) to download and use. 1. With the APX071 connected to the Internet, tap on the Opera Mobile Store icon. 2. Search for your interested apps to download. Open the downloaded files (*.APK) and following the indication to install Apps. TRANSFERRING MEDIA TO YOUR APX071 1. Connect the supplied USB…

Text truncated - open the document above for the full version.

< Giant Telecom Limited > Aug. 04, 2013 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: RAQAPX071 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram RAQAPX071_BlcokDiagram.pdf Schematic Diagram RAQAPX071_SchematicDiagram.pdf Circuit Description RAQAPX071_CircuitDescription.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, we are aware that the exhibits listed above have publicly available since the date the grant was issued. Yours Sincerely, Giant Telecom Limited <SIGNATURE > ---------------------------------------------------------- (Yumin Zhou ) Assistant Manager

< Giant Telecom Limited > FCC ID: RAQAPX071 POWER OF ATTORNEY (Aug. 04, 2013) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen TCT Testing Technology Co., Ltd. (Jack kang, EMC Manager) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Shenzhen TCT Testing Technology Co., Ltd. (Jack kang, EMC Manager) on our behalf shall have the same effect as acts of our own. This authorization expires on (Aug. 04, 2014.) This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, (Giant Telecom Limited), are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Giant Telecom Limited <SIGNATURE> ------------------------------- (Yumin Zhou ) Assistant Manager

Statement We need adding models for certificate approval is APX071- HAVOC, R07- Aspera, TW1000- Intouch, AQX071- Olympia, ARX071- Olympia, ASX071- Olympia, APX-071- GTL, ATX071- GTL, AUX071- GTL, AP7- GTL, BP7- GTL, AX71- GTL, BX71- GTL The basic Model NO.: APX071- Olympia WE HEREBY STATE THAT THESE MODELS ARE IDENTICAL IN INTERIOR STRUCTURE, ELECTRICAL CIRCUITS AND COMPONENTS, AND JUST MODEL NAMES ARE DIFFERENT FOR THE MARKETING REQUIREMENT. Your assistance on this matter is highly appreciated. Yours sincerely, Signature: Date: 2013/08/03 (Yumin Zhou)Assistant Manager Company Name: Giant Telecom Limited Address: 33/F., Two Landmark East, 100 How Ming Road, Kwun Tong, Kowloon, Hong Kong

Page 1 of 1 CCIC Test Lab Attestation Letter Date of Test: Sep 22, 2013 Applicant Name: Giant Telecom Limited FCC ID: RAQAPX071 Test Item: 7" LCD Tablet PC WiFi SAR Test Name of Engineer Performing Test: Statement of Compliance: CCIC Southern Electronic Product Testing (Shenzhen) Co., Ltd. declares that this Unit has been tested in accordance with the test method identified in this test report and that we observed it being tested. It also declares that the Unit complies with the relevant limits. All instrumentation and accessories used to test this unit for compliance to the indicated test method are calibrated regularly in accordance with ISO 17025:2005 requirements by laboratories accredited by A2LA, NVLAP, or ACLAS for the measurement parameters. The measurements were made at: CCIC Southern Electronic Product Testing (Shenzhen) Co., Ltd. lectronic Testing Building, Shahe Road, NanShan District, Shenzhen, P. R. China Test Lab Witness‐ CCIC Southern Electronic Product Testing (Shenzhen) Co., Ltd. Signature of Test Lab Witness: Full Name, Typed: Shuangwen Zhang Title of Witness: Senior Engineer Email Address: [email protected] Phone No.: 86‐755‐86131239 Test Lab Stamp:

External photo

LABEL ARTWORK AND LOCATION Label Size: L*W=50mm*30mm FCC ID: RAQAPX071 Model: APX071 Trade name: Olympia Product: 7" LCD Tablet PC with Wi-Fi This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. FCC ID Label Location

Internal photo 24MHz 16.36MHz 24MHz J11, WiFi/BT ANT

Tune up Description z For 802.11b band: Power = 16.50dBm± 0.5dB z For 802.11g band: Power = 13.30dBm± 0.5dB z For 802.11n(HT-20) band: Power = 13.50dBm± 0.5dB z For 802.11n(HT-40) band: Power = 12. 40dBm± 0.5 dB z For Bluetooth : Power = 1.0 dBm ~4.10dBm

Report No. SET2013-05532 CCIC-SET/T-I (00) Page 1 of 77 FCC SAR TEST REPORT Report No.： SET2013-05532 Product Name： 7” LCD Tablet PC with Wi-Fi Model No.： APX071- Olympia FCC ID： RAQAPX071 Applicant： Giant Telecom Ltd. Address： 33/F., Two Landmark East, 100 How Ming Road, Kwun Tong, Kowloon, Hong Kong Issued by： CCIC-SET Lab Location： Electronic Testing Building, Shahe Road，Xili, Nanshan District, Shenzhen, 518055, P. R. China Tel： 86 755 26627338 Fax：86 755 26627238 Mail： [email protected] Website：http://www.ccic-set.com This test report consists of 77 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CCIC-SET. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CCIC-SET within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. Report No. SET2013-05532 CCIC-SET/T-I (00) Page 3 of 77 Contents 1．GENERAL CONDITIONS .......................................................................................................... 5 2. Administrative Date ...................................................................................................................... 6 2.1. Identification of the Responsible Testing Laboratory ................................................... 6 2.2. Identification of the Responsible Testing Location(s) ................................................... 6 2.3. Organization Item .............................................................................................................. 6 2.4. Identification of Applicant .................................................................................................. 6 2.5. Identification of Manufacture ............................................................................................ 6 3. Equipment Under Test (EUT) ................................................................................................... 7 3.1 Identification of the Equipment under Test ..................................................................... 7 3.2 SAR Summary .................................................................................................................... 8 4 Specific Absorption Rate (SAR) .................................................................................................. 9 4.1 Introduction .......................................................................................................................... 9 4.2 SAR Definition ..................................................................................................................... 9 4.3 Phantoms ........................................................................................................................... 10 4.4 Device Holder .................................................................................................................... 10 4.5 Probe Specification .......................................................................................................... 11 5 OPERATIONAL CONDITIONS DURING TEST ..................................................................... 12 5.1 Schematic Test Configuration ........................................................................................ 12 5.2 SAR Measurement System ............................................................................................. 13 5.2.1 Tissue Dielectric Parameters for Head and Body Phantoms ......................... 13 5.2.2 Simulant liquids ...................................................................................................... 14 5.2.3 Equipments and results of validation testing .................................................... 16 5.2.4 SAR measurement procedure ............................................................................. 18 5.2.5 Antennas position and test position .................................................................... 19 6 CHARACTERISTICS OF THE TEST ....................................................................................... 21 6.1 Applicable Limit Regulations ........................................................................................... 21 6.2 Applicable Measurement Standards .............................................................................. 21 Report No. SET2013-05532 CCIC-SET/T-I (00) Page 4 of 77 7 LABORATORY ENVIRONMENT .............................................................................................. 21 8 Conducted Out Power ................................................................................................................. 22 9 TEST RESULTS .......................................................................................................................... 24 9.1 Summary of Measurement Results ............................................................................... 24 9.2 Conclusion ......................................................................................................................... 24 10 Measurement Uncertainty ................................................................................................ 25 11 MAIN TEST INSTRUMENTS ................................................................................................... 26 ANNEX A .......................................................................................................................................... 27 Accreditation Certificate ............................................................................................................ 27 Typical Test Layout .............................................................................................................…

Text truncated - open the document above for the full version.

FCC ID TEST REPORT for 7" LCD Tablet PC with Wi-Fi Model: APX071- Olympia FCC ID: RAQAPX071 Prepared for : Giant Telecom Limited 33/F., Two Landmark East, 100 How Ming Road, Kwun Tong, Kowloon, Hong Kong Prepared by: Shenzhen TCT Testing Technology Co.,Ltd 1F, Building 1, Yibaolai Industrial Park, Qiaotou Village, Fuyong Town, Baoan District, Shenzhen, Guangdong, China TEL: +86-0755-27363339 FAX: +86-0755-27673332 Report Number：TCT130802044F2-1 Date of Test： August 05, 2013~September 03, 2013 Date of Issue： September 03, 2013 The results detailed in this test report relate only to the specific sample(s) tested. It is the Application’s responsibility to ensure that all production units are manufactured with equivalent EMC characteristics. This report is not to be reproduced except in full, without written approval from TCT Testing Technology FCC ID: RAQAPX071 Report No.: TCT130802044F2-1 Page 2 of 74 Table of Contents 1.0 General Details ................................................................................................ 4 1.1 Test Lab Details................................................................................................ 4 1.2 Applicant Details............................................................................................... 4 1.3 Description of EUT ........................................................................................... 4 1.4 Submitted Sample.............................................................................................. 4 1.5 Test By.......................................................................................................... 4 2.0 Test equipments and Associated Equipment used during the test.................................. 5 3.0 Technical Details............................................................................................. 6 3.1 Summary of Test Results..................................................................................... 6 3.2 Test Standards.................................................................................................. 6 4.0 EUT Modification............................................................................................. 7 5.0 Measurement Uncertainty................................................................................. 7 6.0 Power Line Conducted Emission Test................................................................... 8 7.0 Maximum Peak Output Power........................................................................... 12 8.0 6 dB Bandwidth Measurement........................................................................... 19 9.0 Power Spectral Density..................................................................................... 26 10.0 Band age Measurement..................................................................................... 33 11.0 Spurious Emission Test..................................................................................... 42 12.0 Antenna Requirement....................................................................................... 67 13.0 FCC ID Label................................................................................................. 68 FCC ID: RAQAPX071 Report No.: TCT130802044F2-1 Page 3 of 74 1.0 General Details 1.1 Test Lab Details Name : Shenzhen Tongce Testing Lab Address: 1F, Leinuo Watch Building, Fuyong Town, Baoan Dist, Shenzhen, China Telephone: 13410377511 Fax: -- The test facility is recognized, certified, or accredited by the following organizations: FCC Registration Number: 572331 Shenzhen TCT Testing Technology Co., Ltd., Shenzhen EMC Laboratory: Shenzhen Tongce Testing Lab The 3m Semi-anechoic chamber has been registered and fully described in a report with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration Number: 572331 Industry Canada (IC) Site Listed with Industry Canada of Ottawa, Canada Registration Number IC: 10668A-1 For 3m chamber 1.2 Applicant Details Applicant: Giant Telecom Limited Address: 33/F., Two Landmark East, 100 How Ming Road, Kwun Tong, Kowloon, Hong Kong Telephone: 26095070 Fax: 26095367 Manufacturer: DONGGUAN WISETRONICS TELECOM EQUIPMENT CO. LTD Address: Elite Industrial City, Melin District, Dailing Mount Town, Dongguan Guangdong, China Telephone: -- Fax: -- FCC ID: RAQAPX071 Report No.: TCT130802044F2-1 Page 4 of 74 1.3 Description of EUT Product: 7" LCD Tablet PC with Wi-Fi Model No.: APX071- Olympia Additional Model: APX071- HAVOC, R07- Aspera, TW1000- Intouch, AQX071- Olympia, ARX071- Olympia, ASX071- Olympia, APX-071- GTL, ATX071- GTL, AUX071- GTL, AP7- GTL, BP7- GTL, AX71- GTL, BX71- GTL DC 7.4V Via Lithium Battery & DC 12V Via Adapter Rating: Adapter Information Model:HK-AX-120A200-US Brand Name: HON-KWANG Input: AC 100-240V 0.8A, Output: DC 12V 2.0A Operation Frequency: IEEE 802.11b: 2412-2462 MHz IEEE 802.11g: 2412-2462 MHz IEEE 802.11n: 2412-2462 MHz(HT 20), 2422-2452 MHz(HT 40) Channel number: IEEE 802.11b/g: 11, IEEE 802.11n: 11(HT 20), 7(HT 40) Channel spacing: 5 MHz Modulation Type: IEEE 802.11b: DSSS IEEE 802.11g: OFDM IEEE 802.11n: OFDM Antenna Designation: A PIFA metal antenna and the maximum antenna gain is 0dBi. Model Difference: All modes above are identical in interior structure, electrical circuits and components, and just model names are different for the marketing requirement. 1.4 Submitted sample(s): 1pcs 1.5 Test Engineer The sample tested by Printed name: Jack Kang FCC ID: RAQAPX071 Report No.: TCT130802044F2-1 Page 5 of 74 2.0 Test equipments and Associated Equipment used during the test. 2.1 Test Equipments Instrument Type Manufacturer Model Serial No. Date of Cal. Due Date ESPI Test Receiver ROHDE&SCHWARZ ESPI 3 100379 July 7, 2013 July 6, 2014 Spectrum Analyzer ROHDE&SCHWARZ FSEM 848597/001 July 7, 2013 July 6, 2014 Pre-amplifier Teseq LAN6900 -- July 8, 2013 July 7, 2014 Pre-amplifier Agilent 8447D 83153007374 July 8…

Text truncated - open the document above for the full version.

Conducted Emission test view Radiated Emission test view