RAQMDBJGWALKIE TALKIE

Date: Mar. 28, 2013 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The Giant Telecom Limited, the undersigned, hereby authorizes Mr.Wu Xuewen from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the Giant Telecom Limited. solely in matters relating to the application for an FCC equipment authorization for FCC ID: RAQMDBJG including the signing of documents in connection with this Application. Necessary acts carried out by shenzhen Morlab Communications Technology Co., Ltd. in connection with the Application shall have the same effect as acts of the Giant Telecom Limited. The Giant Telecom Limited also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Thank you for your attention to this matter. Yours Sincerely,

Date: Mar. 28, 2013 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 RE: Giant Telecom Ltd. FCC ID: RADMDBJG FCC Certification Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. Giant Telecom Ltd. requests that the following documents regarding this submission for FCC ID: RADMDBJG be kept confidential: Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Schematics.pdf Operational Description Operational Description.pdf Part list BOM.pdf Tune-Up-Procedure Tune up procedure.pdf Those documents contain detailed system and equipment description and related information about the product which Giant Telecom Ltd. considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, Giant Telecom Ltd. considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Thank you for your attention to this matter. Yours Sincerely,

External Photos 1. EUT front view with ancillaries 2. EUT front view 3. EUT rear view 4. EUT left side view 5. EUT right side view 6. EUT top view 7. EUT bottom view

GIANT MODEL: MD207XXXUSBKE4 CUSTOMER MODEL: MD207R TITLE: FCC ID& MODEL NUMBER LABEL GIANT TELECOM LIMITED DOCUMENT NO. ENG-MD207-09 REV # A PAGE P3 NOTE: 1. STICK THE MODEL NUMBER LABEL INTO THE BATTERY BOX. 2. STICK THE FCC ID LABEL ONTO THE RADIO BACK SIDE. 3. PUT THE DUAL RESONATOR INTO THE BATTERY DOOR,(ONE PER PACKAGE,NOT PER RADIO) MODEL NUMBER LABEL SIZE:W45H7.5MM FCC ID LABEL SIZE: W19.7H3.3MM FCC ID:RAQMDBJG Model:MD207R SN:WYMXXXXX MOTOROLA Tnp:MD207BAXUSBKXX DD/MMM/YYYY IC: 1187B-MDBJG 4.5VDC MADE IN CHINA WYMXXXXX W=GIANT(Vendor Code) Y=Year Code A=2000, B=2001, C=2003,......H=2007 J=2008, K=2009, L=2010, M=2011 N=2012, P=2013, Q=2014, R=2015 S=2016, T=2-017, U=2018, V=2019 W=2020, X=2021, Y=2022, Z=2023,etc. Serial number format: M=Month Code A or B=Jan, C or D=Feb E or F=Mar, G or G=Apr J or K=May, L or M=Jun N or P=Jul, Q or R=Aug S or T=Sep, U or V=Oct W or X=Nov, Y or Z=Dec Date Format: DD/MMM/YYYY DD=Day Code 01, 02, 03......31. MMM=Month Code 01=JAN, 02=FEB 03=MAR, 04=APR, 05=MAY, 06=JUN 07=JUL, 08=AUG, 09=SEP 10=OCT, 11=NOV, 12=DEC YYYY=Year Code 2011, 2012, 2013.....2030 etc. Example: 20/JUL/2011 Serial Number of unit format: S/N is printed base same customer number one by one. Start from first 00000, first unit is 00000, the second is 00001, the eleven is 0000B etc. Include 10 numbers and 21 letters( Igrone 5 English Letters "A, E, I, O, U" ), total 31 digits is a circle: 0,1,2,3,4,5,6,7,8,9,B,C,D,F, G,H,J,K,L,M,N,P,Q,R,S,T,V,W,X,Y,Z. Example: 00000......1 00001......2 00002......3 . . 00009......10 0000B......11(No A) . . 0000F......14(No E) . . 0000J......17(No I) . . 0000P......22(No O) . . 0000V......27(No U) . . 0000Z......31 00010......32 DUAL RESONATOR WITH BARCODE REMOVE LABEL SUPPORT CUSHION 5 5

Internal Photos 1. EUT uncover view 2. Mainboard front view with shielding 3. Mainboard rear view 4. Mainboard front view without shielding 5. RF Part View 6. RF antenna view 7. Speaker view

SZ13020033W01 Page 2 of 26 DIRECTORY 1. GENERAL INFORMATION .................................................................................................... 3 1.1. EUT Description ....................................................................................................................... 3 1.2. Test Standards and Results ........................................................................................................ 4 1.3. Facilities and Accreditations ..................................................................................................... 5 2. 47 CFR PART 95 REQUIREMENTS ....................................................................................... 6 2.1. RF Output Power ...................................................................................................................... 6 3.1 Modulation Characteristics ....................................................................................................... 9 4.1 Occupied Bandwidth And Emission Mask ............................................................................. 15 5.1 Spurious Emission................................................................................................................... 18 6.1 Frequency Stability ................................................................................................................. 20 7.1 RF exposure evaluation ............................................................................................................ 25 7.2 Declaration Of Indentify .......................................................................................................... 26 Change History Issue Date Reason for change 1.0 March 15, 2013 First edition SZ13020033W01 Page 3 of 26 1. General Information 1.1. EUT Description EUT Type ............................. : Walkie-Talkie Applicant .............................. : Manufacturer ........................ : Giant Telecom Ltd. 33/F, AIA Kowloon Tower, Landmark East, 100 How Ming Street, Kwun Tong , Kowloon DONGGUAN WISETRONICS TELECOM EQUIPMENT CO. LTD Elite Industrial City, Melin District, Dailing Mount Town, Dongguan Guangdong, China Operating Frequency Range . : 462.5625MHz ~ 462.7125 MHz (GMRS 1~7 channel) 467.5625 MHz ~ 467.7125 MHz (FRS 8~14 channel) 462.5500 MHz ~ 462.7250 MHz (GMRS 15~22 channel) Modulation Type .................. : FM Modulation RF Output Power...... ........: GMRS: 1.0 W FRS: 0.5W Channel Separation...........: Emission Type................: 25KHz F3E Channel Information......... : Test channel..................: Channel 4 GMRS mode 462.6375MHz Channel 11 FRS mode 467.6375MHz Power Supply ....................... : Battery 3xAA standard alkaline batteries High Voltage: 4.5V Low Voltage: 3.6V Note 1: For a more detailed description, please refer to Specification or User’s Manual supplied by the applicant and/or manufacturer. SZ13020033W01 Page 4 of 26 1.2. Test Standards and Results The objective of the report is to perform testing according to 47 CFR Part 95(Personal RADIO SERVICES) for the EUT FCC ID Certification: No. Identity Document Title 1 47 CFR Part 95 Personal Radio Services Test detailed items/section required by FCC rules and results are as below: No. Section in CFR 47 Description Result 1 2.1046, 95.639 RF Output Power Pass 2 2.1047, 95.637 Modulation Characteristics Pass 3 2.1049, 95.633, 95.635 Occupied Bandwidth And Emission Mask Pass 4 2.1051, 95.635 Radiated Spurious Emission Pass 5 2.1055, 95.621, 95.626 Frequency Stability Pass 6 2.1093 RF exposure evaluation Pass NOTE: The tests were performed according to the method of measurements prescribed in TIA- 603 -D. SZ13020033W01 Page 5 of 26 1.3. Facilities and Accreditations 1.3.1. Facilities Shenzhen Morlab Communications Technology Co., Ltd. Morlab Laboratory is a testing organization accredited by China National Accreditation Service for Conformity Assessment (CNAS) according to ISO/IEC 17025. The accreditation certificate number is L3572. All measurement facilities used to collect the measurement data are located at 3/F, Electronic Testing Building, Shahe Road, Xili, Nanshan District, Shenzhen, 518055 P. R. China. The test site is constructed in conformance with the requirements of ANSI C63.7, ANSI C63.4 and CISPR Publication 22; the FCC registration number is 695796. 1.3.2. Test Environment Conditions During the measurement, the environmental conditions were within the listed ranges: Temperature (°C): 15 - 25 Relative Humidity (%): 30 -60 Atmospheric Pressure (kPa): 86-106 1.3.3. Measurement Uncertainty The uncertainty is calculated using the methods suggested in the "Guide to the Expression of Uncertainty in Measurement" (GUM) published by ISO. Uncertainty of Radiated Emission: ±3.0dB SZ13020033W01 Page 6 of 26 2. 47 CFR Part 95 Requirements 2.1. RF Output Power 2.1.1. Provisions Applicable Per FCC §2.1046 and §95.639(d): No FRS unit, under any condition of modulation, shall exceed 0.500 W effective radiated power (ERP). Per FCC §2.1046 and§95.639(a)GMRS transmitter, under any condition of modulation, shall exceed 50 W Carrier power (average TP during one un-modulated RF cycle) when transmitting emission type A1D, F1D, G1D, A3E, F3E or G3E. 2.1.2. Test Procedure 1. On a test site, the EUT shall be place at 1.6m height on a wooden turntable, and in the position closest to normal use as declared by the applicant. 2. The test antenna shall be oriented initially for vertical polarization located 3m from EUT to correspond to the frequency of the transmitter. 3. The output of the test antenna shall be connected to the measuring receiver and the quasi-peak detector is used for the measurement. 4. The transmitter shall be switched on , if possible, without modulation and the measuring receiver shall be tuned to the frequency of the transmitter under test. 5. The test antenna shall be raised and lowered through the specified range of height until a maximum signal level is detected by the mea…

Text truncated - open the document above for the full version.

SAR Test Setup Photographs EUT Side Definition Item Side 1 EUT Front side 2 EUT Back side n o ©2013 A Test Lab Techno Corp. Report Number: 1303FS12-02Page 1 of 7 Brain Setup (The front surface to phantom 10mm) n o ©2013 A Test Lab Techno Corp. Report Number: 1303FS12-02Page 2 of 7 Muscle Setup (The back surface to phantom 10mm) o n ©2013 A Test Lab Techno Corp. Report Number: 1303FS12-02Page 3 of 7 Muscle Setup (The back surface with Ear bud to phantom 10mm) o n ©2013 A Test Lab Techno Corp. Report Number: 1303FS12-02Page 4 of 7 Muscle Setup (The back surface with Flexible Ear Receiver to phantom 10mm) o n ©2013 A Test Lab Techno Corp. Report Number: 1303FS12-02Page 5 of 7 Muscle Setup (The back surface with Remote Speaker to phantom 10mm) o n ©2013 A Test Lab Techno Corp. Report Number: 1303FS12-02Page 6 of 7 Muscle Setup (The back surface with belt-clip to phantom 0mm) o n ©2013 A Test Lab Techno Corp. Report Number: 1303FS12-02Page 7 of 7

Test Setup Photos 1. Radiated Spurious Emission 2. Frequency Stability 3. Modulation Test